The reality of how much work it is to repaint a vintage truck, 4 full days of solid work non stop 👊 Too much to only fit in 2 videos! Stay tuned for the reveal next week 🥳
Hey Ange and Chris. Some serious preparation going on. Looking forward to seeing the final colour. Thank you for taking us along on the refurbishment process.
Happy to see you two didn’t just throw your hands up and start painting a poorly prepared and unrepaired surface. Also glad to see the use of PPE more so than your average DIY.
I feel your pain! Raptor Painted my plastic flares and bumper and the interior plastic trim on my 90 series Prado . . . . Took fkn ages to do it properly but dam it still makes me smile every time I walk up to my car 👌👍😂😭🤣😅😁 and I knew very little before I started so made quite a few learning curves along the way. Keep up the great work 👍
Can't wait to see you building the Camper, with all this dedication (let's not say obsession), it is gonna be quite interesting. Looking great. There is never enough coffee. ¡PURA VIDA!
How can two people look so good...Venus and Atlas. My mum was born in Spain but grew up in France, she says sheets just like Angie. My mum says, "I bought new shits", or "I changed my shits".
We definitely don't regret it! We are very proud of our job and the finished result. Raptor wouldn't suit every vehicle but certainly suits the Mog well 👍
pro tip don't try take the masking tape off when it sticks to the drop sheet. much easier to just cut the tape and leave it on the drop sheet to avoid making holes in it
Lmao what a tease i thought it was going to be grey when you were pouring paint at the end but thats primer. This colour better be epic after all this teasing
Oh ours was that badly rusted that I had to fully cut out and renew the beams under both doors - you can get them for 200 Euros, but it is major welding- took me months. I could actually put my shoe through the holes in the floor, it was that bad.
Just out of curiosity. Why didnt you take the rear windows and door glass out as well? And would it have been easier to raptor the cab before you lined the interior??
Ang said cider and you Guinness, but have you tried them mixed half and half ,Guinness in a glass first then top up with cider ,very satisfying drink gets to parts other beers can't. Go try it you'll love it
The reality of how much work it is to repaint a vintage truck, 4 full days of solid work non stop 👊 Too much to only fit in 2 videos! Stay tuned for the reveal next week 🥳
Hi guys we are happy to meet you❤️
Same! Looking forward to following your adventures from the other side of the world 😃
I LOVE when Ange says "Shits" when she says Sheets. That beautiful accent. I love that young lady. Keep up the great work you two. ❤️❤️❤️
Respectfully, I came for the Unimog but stayed for the "Ange".. Well done, you two! :)
Hey Ange and Chris. Some serious preparation going on. Looking forward to seeing the final colour. Thank you for taking us along on the refurbishment process.
Eventually， this truck is gonna turn into a Gentle Beast...
Sure will 😈
"The fun begins where the pavements ends". Your project is unbelievable! Cheers, Domenico.
Love the quote 👍 thank you for following along Domenico :)
"To the windooow, to the wall" 😂😂 Love the Eastside Boyz reference 😎
Heck yes guys! Raptor is the beans, all in the prep :) Rougher the better I've found with the sanding
Wow,you guys are steaming ahead at a hectic pace. Can not wait for the next video and the final result. Hang in !!
Happy to see you two didn’t just throw your hands up and start painting a poorly prepared and unrepaired surface. Also glad to see the use of PPE more so than your average DIY.
I feel your pain! Raptor Painted my plastic flares and bumper and the interior plastic trim on my 90 series Prado . . . . Took fkn ages to do it properly but dam it still makes me smile every time I walk up to my car 👌👍😂😭🤣😅😁 and I knew very little before I started so made quite a few learning curves along the way. Keep up the great work 👍
Hard job but good job 💪👏 Your Unimog will be like a newborn 😊
Thank you so much Virginie and Daniel! Ahah yeah he will look a lot newer 😄
Today is a good day Trent Palmer and The OutFit uploaded. :)
Can't wait to see you building the Camper, with all this dedication (let's not say obsession), it is gonna be quite interesting. Looking great. There is never enough coffee. ¡PURA VIDA!
So much work and attention to detail. Wow. Great job on the extra work to film and edit this for us to enjoy!
Great job on the masking in the engine bay! Function over form is perfect 👏👏
THAT CLIFFHANGER THOO so mean 🤣❤ cannot wait for the reveal!
Good work guys its coming up a treat the hard work is paying off
well done guys
Newspaper is a great cheap masking material 👍 I know too late by the time you read this but I’m sure there will be more paint jobs in the future 😎
paint soaks thru paper and can stain but would be ok on glass as a razor will get it off, try baking or wax paper
How can two people look so good...Venus and Atlas. My mum was born in Spain but grew up in France, she says sheets just like Angie. My mum says, "I bought new shits", or "I changed my shits".
Oh the cliffhangers 😩😅 stoked for the reveal! 😎🤙🏾
I hope you don't regret painting it in raptor, all the ones I've seen irl haven't looked as good as you would think.
We definitely don't regret it! We are very proud of our job and the finished result. Raptor wouldn't suit every vehicle but certainly suits the Mog well 👍
Such a tease with the last shot! Looking great guys 👍🏻💚
Awesome!
Love seeing the transformation!
You guys are great a real power couple keep up the hard work guys hope to see you on the wa tracks wilbinga is my local
Well you’ll have a great record of all the work gone into this vehicle if you ever sell it
Great job.
you guys are a power couple
looking great guys. All your hard work is definitely paying off. 🇦🇺🍺❤👍
Saludos desde Chile amigos...Éxito
pro tip don't try take the masking tape off when it sticks to the drop sheet. much easier to just cut the tape and leave it on the drop sheet to avoid making holes in it
wax paper or baking paper works best for masking up guys
hey thats not fair...............have to waite ..GRRRRRRRRRRRRRRRRR
Lmao what a tease i thought it was going to be grey when you were pouring paint at the end but thats primer. This colour better be epic after all this teasing
Oh ours was that badly rusted that I had to fully cut out and renew the beams under both doors - you can get them for 200 Euros, but it is major welding- took me months. I could actually put my shoe through the holes in the floor, it was that bad.
Newspaper will work to mask windows for painting.
We didn't have any in hand unfortunately - it will be our pick too if we ever had to do it again 😁
The camo paint is like a polyurethane isn’t it‽ does the raptor paint still adhere as well as expected ‽
Love your works guys.
Choice❤
Hi guys… How well is your Raptor Liner holding up? Would make a great video update showing wear and tear.. cheers
We touched base on this topic here : ruclips.net/video/BNhI7Pda2cY/видео.html
liquid steel for those holes mate
Just out of curiosity. Why didnt you take the rear windows and door glass out as well? And would it have been easier to raptor the cab before you lined the interior??
Ang said cider and you Guinness, but have you tried them mixed half and half ,Guinness in a glass first then top up with cider ,very satisfying drink gets to parts other beers can't. Go try it you'll love it
We call that a Snake Bite
@@GrandadBaz snap same as us
Ahaha, Chris' expression @4:30
Pls wear P1 or p2 masks when sanding!
at 9.45, when your talking to Ange about sanding. are your tyres wearing ok. they look like they are feathering
Hopefully upgrading tyres soon 🤞
hey guys good video , do you own the other Moggs in that yard?
Cheers! No we don't, one is enough 😁 it belongs to another Unimog owner 👍
Ka pai bro
I WAS looking forward to repainting my Jeep...now, I wanna repaint a Unimog. Not!
i don,t think the army painted the cabs on them thats how they come from the factory
Not a army repair it would be the contractors,lot of dodge repairs went on at bulimba barracks
Ang, you're getting too thin girl! That's a job that never seems have an end. No fun.