Ok to everyone interested, I own S5 Coupe with adaptive suspension and today installed rainbow pro unit with G sensor and everything works perfectly. Did get a fault at the start with suspension issue but there are few additional steps to be performed and it will work. 1 Turn on the car 2 Put it to neutral 3 Turn left direction 4 Press and hold return button for 15 sec [while holding rpm will go to 1.4k once you will let go of the button all is done. Enjoy
Hey I need your help, I was following your video and installed the module it worked well later I got a electricalmalfunction popup on my dash board, so decided to uninstall the module while doing that got spark when removing the pins from the connector, and my car won’t start and also unable to lock the vehicle, please guide me I need your help as you already figured out how to start the car back. I have A6 2019.
@@chthan3o3 wouldn't just be for this measly feature lol, but frankly, if you can afford something without breaking the bank or even 3% of the bank, that's a no brainer. Some people have different lives than you, and that's ok too.
At first, nice video. I just ordered this Module for my s5 convertible, i already coded the Engine data display and was disapointed it didnt work. Is there any wiring diagramm in the box with it or did you figure that out yourself? And must it be connectet with the control unit under the seat or can i connect it anywere else with the canbus?
The rainbow module has to be installed on the CANBUS connector as seen in my video. Unfortunately my module did not come with instructions, which was why I made this video to help others. There is now a new module available from certain sellers that will supposedly make the G-Meter work. I’ll test it out once my new module arrives
Still called the Rainbow module. Some sellers will state “Pro”. Just have to look through the listings and look for ones that say “G Value” in the photos
Help recieved a different version with the gmeter and wired, fairly sure correctly but car wont start … how do you get the cover off the fuse box, just a screwdriver to pry the circle off then the torx 30T ? Also are there spare 20A fuses in the fuse box .
Do you know was the issue with adaptive suspension resolved on the pro unit and also I’ve noticed in the video torque goes to only to 86% is it the reason you were on a higher gear or is it an issue with the unit
I know this is old but I’m trying to get the shift lights and I have everything else working and switched to the rs5 cluster but the shift lights alone aren’t working
Also do u know if you’re able to have the shift lights without the RS display? I also don’t want the RS display, but obviously would like the shift lights, especially in the HUD.
Can you do a full acceleration pull to check something for me? Under full throttle My torque gauge only hits 86 percent. Power gauge goes full 100 percent. So either something wrong with the gauge, or my car isn't making full torque. I am running the apr stage 1 tune and my car feels perfectly fine. I feel I would be able to tell if my car was down on torque.
Ok to everyone interested, I own S5 Coupe with adaptive suspension and today installed rainbow pro unit with G sensor and everything works perfectly. Did get a fault at the start with suspension issue but there are few additional steps to be performed and it will work.
1 Turn on the car
2 Put it to neutral
3 Turn left direction
4 Press and hold return button for 15 sec [while holding rpm will go to 1.4k once you will let go of the button all is done. Enjoy
A.
i cant believe you got this! you're an audi legend
You were always an electronic genius...
Thanks for the update on the Pro. That sucks on the error!
Hey I need your help, I was following your video and installed the module it worked well later I got a electricalmalfunction popup on my dash board, so decided to uninstall the module while doing that got spark when removing the pins from the connector, and my car won’t start and also unable to lock the vehicle, please guide me I need your help as you already figured out how to start the car back. I have A6 2019.
Same thing happened to me last week. Any luck fixing the issue?
Lol videos like this just make me think, may as well buy the right model lol
Feel free to pay over 20k for the RS model for this feature
@@chthan3o3 wouldn't just be for this measly feature lol, but frankly, if you can afford something without breaking the bank or even 3% of the bank, that's a no brainer. Some people have different lives than you, and that's ok too.
At first, nice video.
I just ordered this Module for my s5 convertible, i already coded the Engine data display and was disapointed it didnt work.
Is there any wiring diagramm in the box with it or did you figure that out yourself? And must it be connectet with the control unit under the seat or can i connect it anywere else with the canbus?
The rainbow module has to be installed on the CANBUS connector as seen in my video. Unfortunately my module did not come with instructions, which was why I made this video to help others.
There is now a new module available from certain sellers that will supposedly make the G-Meter work. I’ll test it out once my new module arrives
@@chthan3o3 Okay. Do you know the Name of that Control unit? Just in case it's located somewhere else in the concertible
Still called the Rainbow module. Some sellers will state “Pro”. Just have to look through the listings and look for ones that say “G Value” in the photos
Help recieved a different version with the gmeter and wired, fairly sure correctly but car wont start … how do you get the cover off the fuse box, just a screwdriver to pry the circle off then the torx 30T ? Also are there spare 20A fuses in the fuse box .
Same thing happened to me! Any luck figuring out what was shorted and where?
Nice Carsound 👌
Very interested to hear about the G meter!
See updated description above
@@chthan3o3 thanks I have adaptive suspension so thanks for letting me know 👍
Can you make an Installation guide for the Pro Model? My Module has 6 wires instead of 4.
Is the procedure the same for the A7? Same wiring?
Do you know was the issue with adaptive suspension resolved on the pro unit and also I’ve noticed in the video torque goes to only to 86% is it the reason you were on a higher gear or is it an issue with the unit
Great video
I know this is old but I’m trying to get the shift lights and I have everything else working and switched to the rs5 cluster but the shift lights alone aren’t working
Sooo... can i still buy the pro version of the box without activating or using the G meter ?
with this box, in addition to seeing torque and acceleration, is it possible to activate the sport layout?
Will it work in my A5 1.4 tfsi
Also do u know if you’re able to have the shift lights without the RS display? I also don’t want the RS display, but obviously would like the shift lights, especially in the HUD.
Only way to get shift lights is to convert to the RS display via OBD11
Where do you live? I was wondering if you could do this for me in my B9 S4
It will be same think on 21 s6?
🙌🏻🙌🏻🙌🏻🙌🏻🙌🏻🙌🏻🙌🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻 thank you bro
Can you do a full acceleration pull to check something for me? Under full throttle My torque gauge only hits 86 percent. Power gauge goes full 100 percent. So either something wrong with the gauge, or my car isn't making full torque. I am running the apr stage 1 tune and my car feels perfectly fine. I feel I would be able to tell if my car was down on torque.
Mine only gets to 86% as well. Must be the box. I’m running EPL. These gauges are more for aesthetics than anything else tbh.
Link to The Box?
Do you know why your Torque number is only going to 86%? Are you tuned?
EPL tuned, no idea why its at 86% at WOT.
I have that tune as well. That’s a bummer it doesn’t go to 100.
how go enable the reading on the right bottomthe boost gauge?
My car has dynamic susoension is there any way to solve malfunction issue?
I chatted with the seller, they told me no.
You will not have the issue if you get the older box like the one installed in the video
what store are you getting the pro version on aliexpress?
Let me test it out to determine if the G-meter will work first before I share the info. Will create a new video if it’s successful
See updated description regarding error above with new module.
Seller is VW AG Store if you still wanna do it
bro ..any way to do it on a4 b9 (i have the normal virtual cookpit with the 2 watch layout) not the S layout
any way to enable sport layout in used virtual cockpit a4 b9?
can you send a link to the module?