Also did u try to move the drive spoon so it's out of the stream more ? It may need adjusted after replacing the arm bearings. If you move it out of the stream it won't hit it as hard and won't overextend.
As much pressure u have coming out of that sr150 you should upgrade to a sr200 or f200 or if you're feeling nostalgic a p200. Bigger nozzle sizes and u dont have to worry about it breaking down so much from it overextending the drive arm and having it hit the lower body of the gun
you might want to adjust your drive arm's counterweight so it doesnt come all the way back and hit the piping assembly. Eventually the arm will get damaged from coming back that far after every stroke. Just some friendly advice.
I had to read the description... You did what I was going to suggest... It's easy to see that the bearings we're out.... Only other thing would have been weight adjustment, but someone already said that and you replied that you had tried...
Since he is working with so much water pressure and GPM, a SR200/P200 would have been a better choice since even after adjustment the drive arm is kicking back so far its hitting the bottom of the guns barrel and will likely need the arm replaced again. the 200 series of Nelson big guns puts out from 250-1200gpm and is the biggest they make, and the 200 is designed for high volume output. Lots of P200's where i live on travelers or solid sets, As a kid i always loved watching them work, of course the P200 is a vintage 70's nelson gun and is not made anymore, due to SR being more efficient at putting water down, and does not have to "fast reverse" putting stress on the point where the gun itself is mounted, since they whip back around so fast. without setting the brake properly a lot of these vintage "fast reverse" guns would break prematurely.
Yo perforo pozos para agua pequeños pero bombean 24 horas. En un cultibo son 5 posos para no pisar el maiz solo lo pones la cabeza reductora en cada pozo
bearings wore out ? looks like the drive vane at the end of the arm wasnt hitting the stream properly causing it to short stroke. I always thought these were cool. do u got any of the old fast reverse guns?
Hey Mr Ryan ..pliz purchase for me one ...am humbly requesting whoever may help me ...am a young Kenyan youth... I have ea good piece of land and I run various project but water is a challenge to me
I had this problem this year
I changed the bearings in the arm to fix it !
Also did u try to move the drive spoon so it's out of the stream more ? It may need adjusted after replacing the arm bearings. If you move it out of the stream it won't hit it as hard and won't overextend.
كلمنا عنه من ناحية طلمبه كام بار والسعر وهل يباع في مصر
Are this sprinkler spray working 360 degrees automatically?
How much?
And how way to order?
how can I get this tool, do you have a branches in Tanzania??
As much pressure u have coming out of that sr150 you should upgrade to a sr200 or f200 or if you're feeling nostalgic a p200. Bigger nozzle sizes and u dont have to worry about it breaking down so much from it overextending the drive arm and having it hit the lower body of the gun
120psi at the gun 135 at the real
Hola amigo de cuantas pulgadas es ese aspersor
1.2”
1 de salida 2 de entrada y el precio de el aspersor
Amigo cuantos metros moja
Hw much in UAE money plz
Que presión tienen estos cañones de manguera de rollo
I think you’re doing the right thing.
Hello excuse me, what store you bought it!?
Watertec
Abbotsford BC
Thanks for the information!!!
00971523676370
Our farm was outside lynden. I recognize the hills!
Hello bro .. that distance or radio can be irrigated with this irrigation Cannon
400 ft diameter
I want your help sir
Why not switch to drip irrigation? Some hindering factors?
More cost $$$
Is pr Kya kharcha ha bro
Sir can you tell that can it work 2hp motor on groundwater
No
Not enough pressure
Which is the best irrigation ?rain or fluid irrigation system for agriculture
Hello
Please tell me, what area it handles?
From where you are pumping this water?bore well/canal/river?what is the pumping motor u are using?is it submersable motor?
Pumping from a well
Motor is a 45hp submersible
Where can I find it?
Is the weight at the end of the gun. Put the weight back more. I did it and it worked for me!
Ended up being the bearings
Tell me rate & how much long area covers
350 ft @300gpm
What is nozzle pipe size ?
Please what is the discharge? what size of pump should be used to attain required pressure? and can we use this for wheat irrigation?
2”
We have a 65 hp well pump
6” main line
@@PetesFarmingVideos what is the price of the gun in USD? Can i use gasolene or diesel pump?
quantos metros ele joga
you might want to adjust your drive arm's counterweight so it doesnt come all the way back and hit the piping assembly. Eventually the arm will get damaged from coming back that far after every stroke. Just some friendly advice.
Christopher Ryan I tried that! All different settings, and it didn't seem to help any?
Like your setup ,how many guns can we use at a time?
Depends on your pump
You need at least 75-85 psi at the gun
We run 2
Pete's Farm Videos same motor of 45hp for both? How deep is the weel?
I had to read the description...
You did what I was going to suggest... It's easy to see that the bearings we're out.... Only other thing would have been weight adjustment, but someone already said that and you replied that you had tried...
Since he is working with so much water pressure and GPM, a SR200/P200 would have been a better choice since even after adjustment the drive arm is kicking back so far its hitting the bottom of the guns barrel and will likely need the arm replaced again. the 200 series of Nelson big guns puts out from 250-1200gpm and is the biggest they make, and the 200 is designed for high volume output. Lots of P200's where i live on travelers or solid sets, As a kid i always loved watching them work, of course the P200 is a vintage 70's nelson gun and is not made anymore, due to SR being more efficient at putting water down, and does not have to "fast reverse" putting stress on the point where the gun itself is mounted, since they whip back around so fast. without setting the brake properly a lot of these vintage "fast reverse" guns would break prematurely.
How many pounds is the watering can
90psi pressure at the gun
where and how can i det this?
can buy in india
Rain gun irrigation excellent for nitrogen and c02 sequestration ,which reduces application of chemical fertilizers
Es buenisimo que el.agua caiga sobre el.cultivo
Where this gun available and price how much
Inter net ebey..there many brands to chose from. I had check my self
Where you buy this gun. Thanks,
Abbotsford Canada
Can you share water pump information, thanks.
50 Hp pump
I want to know the highest ranges of these guns and sellers in Pakistan
iski kemat kya hai
Cómo lo soluciono si no gira
Se que en un solo lado, o gira muy muy despacio
Yo perforo pozos para agua pequeños pero bombean 24 horas. En un cultibo son 5 posos para no pisar el maiz solo lo pones la cabeza reductora en cada pozo
where this gun.. buying me tell me please
Vattelo a compra' somaro
We have 3hp motor
3 hp support for this gun
Any other spetiol motor
rajesh Adhi
Are the corn crushed on the pathway lost?
Esse aspersor está com rolamentos danificado é preciso urgente revisão,
How money
does it good for other crops like watermelon and cabbage?
mabula paschal yes, just use smaller nozzle
okey,if I have generator,does it enough to operate it.
mabula paschal yes, just make sure u have a small nozzle on end, to get the psi at the gun for jet spray
thanks chief
How to buy this gun ?
You can get them from ebay and other websites
Sir I want this type water pump where we can get in Telangana, hyderabad and about cost of price
65,000.00 plus shipping
Bro the leaves are very healthy,, no insect bite at all.
bearings wore out ? looks like the drive vane at the end of the arm wasnt hitting the stream properly causing it to short stroke. I always thought these were cool. do u got any of the old fast reverse guns?
Christopher Ryan no I don't, definitely had to replace bearings
Hey Mr Ryan ..pliz purchase for me one ...am humbly requesting whoever may help me ...am a young Kenyan youth... I have ea good piece of land and I run various project but water is a challenge to me
May you be blessed in advance
How do you set up the system ?
Jenius yakin top markotop
From Indonesia
Where is thats
Iska price Kitna Hai Kahan Milega
Is that a good product?
Yes
Nelson is a good product
This gun is very old and had to replace the arm bearings
It’s common
Great video wondered how these sprinklers worked and the output, Thankyou.
that sure drives that drive arm all the way back. Must have some massive force behind the stream.
Christopher Ryan 75 horse pump 550 gallons per minute
@@PetesFarmingVideos what pump is this, brand and model????
Were buy ??
WaterTec Abbotsford BC
I Like it! Do they sell this in the USA? What store can I find it at
This Baja California?
rate kya hai
Price kay aahi
Sao ko nhap ve vietnam vay troi
Sir I want this type water pump where we can get in tamilndu
Ann how much it cost
Good job save time and save water
EXCELENTE CHORRO DE AGUA PERO UN CHORRO DE AGUA DE ESA MAGNITUD ES MAS PERJUDICIAL QUE BENEFICIOSO
Where are you? Looks like a beautiful place.
British Columbia Canada in the Fraser Valley
Aapka contact no. Dena
What's the price of it
Wow kren, hrg piro
कितनू रूपये हैं
Mua ở đâu vậy
India ya milta hai kya
How much HP needed
45
How much?
Need one gun this type in India what's the price
27,000 CAD
i want to request that
Hermosa tecnica para rigacion de maiz ✌
I need one sr 150,am in kenya
किमत किती आहे
Nice very good feld corn
THIS IS JUST GR'888 GOD BLESS YOU WITH GOOD HEALTH AND HAPPINESS.
JAI HIND JAI BHARAT MATA.
🌹🙏🏼🌹
RAYMOND MOBAIKER
OF INDIAN
Esse canhão de água será que fica caro ESSE sistema?
I like this programme, but viewers need to know about the pump size and source of water. Especialy i need to know. Please let me know.
Vraiment c'est super !!!
แบ่งโซนการเกษตร
Dear sir
I am from Pakistan and I cultivate wheat and sugarcane
my question is this that can I use this equipment for this crops
Yes
I just wanna see the pump thats pumping that kind of pressure!
50 hp submerged 30 ft in the ground
We use it in sugar cane too.
Mantap salam dari Indonesia
This is wonderful
el ranchero
Ganaderia
Hagricultura
Sobretierra
#1
เท่าไรครับ
Un vrai projet d'irrigation
I have never, nor will I ever, own, operate, or work on a farm.
Howd I get here
thats a powerful one there
Drip Sabse sahii he sir
Probably the guns alignment went wrong. And there may be problem in spitter and barrings.
Was in the bearings
เขตทุ่งเตา
베트남 no.1
el ranchero
Hagricultura
maiz #1
Good work jakisan jai hind
วิธีการ
good 👌👌👍