Learn building - Simple Blacksmith Coal Forge - By AMbros custom
HTML-код
- Опубликовано: 14 дек 2017
- These past couple of months I watched forged in a fire a lot and I am inspired by them a lot that's why I decided to build this coal forge. This forge is made out of 4 mm thick mild steel and I lined the walls with 1" thick refractory cement to make it more insulated. I also laid a 1/2" thick layer of refractory cement on the entire surface of the forge so that if I have to heat treat long knives than I can able to heat them very easily. If you are using a 1/2" thick steel plate that you have no need to lined the fire pit. When I performed my first test I found that the fire pit walls turned into bright yellow color and I think If I am going to run my forge for a couple of more minutes I completely destroyed my fire pit. I also added 4 locking casters to each of the legs so that I can move this heavy forge where ever I want.
If you like this build then don't forget to subscribe to our channel for more awesome stuff.
Instructables Blog post article of step by step build:-
www.instructables.com/Coal-Fo...
Watch my other Knife Builds
Knife Making - Bowie Knife - By AMbros custom
• Knife Making - Bowie K...
Knifemaking - CS: GO inspired push daggers - By AMbros Custom
• Knife making - CS:GO i...
Turning Stainless Steel Welding Electrodes Into Chefs Knife From Stick welding - By AMbros custom
• Turning Stainless Stee...
Japanese Tanto Knife or Wakizashi
• Japanese Tanto Knife o...
Knife Making: Custom Japanese style Chefs Knife - by AMbros custom
• Knife Making : Custom ...
Haladie Dagger - Forged in Fire inspired - By AMbros custom
• Haladie Dagger - Forge...
Making a Graver and Template set for Engraving
• Learn Making a Graver ...
#coalforge #blacksmith #ambroscustom 
Хобби
I really like your details of lockable, rotating casters and lining with refactory cement. When I rebuild my forge, I'll do the same.
+Bob Vines thanks buddy I gald you like it. I suggest to slightly increase the thickness around the fire pit to prevent small cracks.good luck with your build.
This video deserves a million likes, great video.
Thanks for your generous words:)
Excelente proyecto muy bien desarrollado y mejor ejecutado , una fragua estupenda , con algunas reformas , pero en qué proyecto no las hay , jajaja , gracias por compartir tanta creatividad, un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España ) 🤓 😜
Dear Sir, thanks for showing your entire build of your excellent forge. There are a lot of nice features you showed that I would like to incorporate in my own build. Thanks.
Hey! WELL DONE! Thanks! Very informative video!
i like the design and work, but the video looked like stop motion, couldnt watch it all at standard speed.
Thanks for the comment yeah there is some problem in the video about the frame skipping. Once I noticed it was too late, hope it will not bother you too much:)
I like the way u work...very clean and precise! Great video
Thank you buddy, glad to hear that:)
Beautiful!
yeah man, ive built a couple of forges. both coal and propane, yo simplified the process in several areas. i actually used 1/2" plate for my fire pot of the coal forge. lots of overkill, but thats what i had on hand.
great job! great video!
+Brady McPhail thanks brother I appreciate your kind words.
Nice job on both the design and the build! Enjoyed the video!
Thanks man glad you like it.
It's NOT cool. to have music playing while you're talking!!!!!!!!!!
Wow. That is very impressive. It looks nice and it also functions well.
+Tefen Ca thank you so much. I am glad that you like it. Tommorow I am going to post my knife hope you like that as well. :)
Very nice
Thanks dear
Very impressive!
Thanks man:)
Well Done!!!
Doug Ronson Thanks....
Great stuff mate.
MrJamesjustin thanks man glad you like it
Good job man! Nice touches. 👍
Thankyou so much:)
Magnifique..
I am watching this and when you use the diamond wheel I feel like I am breathing that cement dust and feel like I need to cough! Hahahah 18:31 And yes it does look great!
Nice build!
Thanks man:)
me and my dad built this forge this year and it works amazing but we made it bigger to make large blades [swords] nice job mate we are so happy with the out come
Extremely happy for you brother:)
keep doing what you do you are grate
Thanks man:)
👍✌️
Nice stop motion XD
😂😂😂it's horrible I know.
Nice build. Do you think the body filler will be an issue?
+MKRBRKR thanks brother, no that filler not an issue wall thickness is the only issue. After lining cement I again use that filler but nothing happen:)
Its a nice forge you've made. brilliant - where are you based bro?
Thanks dear from Punjab
Looks good but the music is distracting as hell. Might turn music down on your next edit. Thanks
Never mind, I see you turned it way down during the video, great job.
Thanks dear, that was my early build when I was learning editing and made alot of mistakes, but now I completely avoid them.
Would you mind telling me the size of the fire pit at the top and the size at the smaller bottom ( before you added any fire cement) please. I have a stand & some 12mm plate & want to make a similar design. This seems brilliant.
Thanks for an excellent video by the way
Thanks, top dimension of the rectangle is 15"X 8" and dimensions from the bottom is 8" X 3". To construct that pit you need 4 trapezoid having dimensions 8"x15" and 8" x 3". Perpendicular height of that trapezium is 6". Hope it helps good luck.:)
@@ambroscustom Great help Thanks.
nice video. terrible editing
Did you use 1/4 inch sheet metal to build the box around your fire pot?
No dear it's 4mm thick. The whole build is made out of 4mm thick sheet of mild Steel.
Omg im getting a headache from the shaking and jitters
what blower are you using
dan not dear it's a Chinese blower but have solid build quality have Aluminium body and air discharge is very good. Cost me around 20$.
Could you give me instructions on how to construct the firepit (just the drawing part) or maybe even your measurements or a little drawing of the plates i need to cut for the pit ?
Would be really nice and Im to stupid to figure it out by myself
Just pm me
I really like your design and im trying to build it kinda the same way
Look for that kind of pit you need to make trapezium which have two parallel sides and two non parallel sides. But make sure that the two non parallel sides needs to be equal. The two parallel sides having two different measurements the top one which is smaller in length is going to made your bottom of the pit. There are total of 4 pieces required. You can keep all of them same or you can make pair of two like what I do in my case. But make sure in all of the four pieces the tapered sides need to have same length and the angles. Send me you mail id I send you the design, if you have some custom requirement just leave me a message. I reply you tomorrow at the same time.
turn this whole Project without power tools by yourself
how do you deal with clinker??
+Chris Qiao it's quite easy for me, for that I use piece of rebar and then forcing the clinker to the bottom and also break it down to small chunks so that it can easily pass through that perforated metal sheet which I made having 13 mm diameter holes to the dumping area and from that it easily get out of the forge. Seems to be look confusing but some how I easily master this process and keep my forge ignite. I do this process after every 30-45 minute to keep my forge ignite. thanks...
WHAT?! I CAN'T HEAR YOU!!!!!!!! Good grief turn off the annoying techno music.
The ash dump is shown at 0.38 in the video
+lescerm thanks man..
Holy crap never seen anyone use a jigsaw to cut that thick of sheet metal , what kind of saw are you using if it's ok to say ???? And blades ????
Hahaha but it's working good brother, jigsaw doesn't matter, the blade I used is from Bosch and I recommend that for this work. You have to kept the speed at medium and don't try to force the blade in forward motion let the blade do the job and use oil to kept the blade cool and make sure to clean the debris. If you follow this recipe you can easily cut metal with this. Thickness wasn't that much in my case it's only around 4mm but off camera I also cut 12mm brass with this without any issues for my bowei knife.
@@ambroscustom thank you I will look at the jigsaw in a new light , I've always wanted to use one in this manner but thought they were for lighter duty use but I see if all the right precautions are met it can see cut this material !!!!!
Yes you can dear, good luck...
how much money do you want for this forge
Dear I am thousands miles away from you, but I recommend you to try to make by yourself. It seems difficult but not really indeed :)
Wow 144hz
😂😂😂😂 ya man it's horrible I know. But I can't able to do anything now.
Watching this is like watching a game lag
Guess you haven't played anything except stuff this side of the noughties then.
I have no money and I don't know how to get money but I really want to be a blacksmith but i have know idea how to get the items to build a forge,and anvil.
Live in Ohio,girard and I don't know if I can even be a blacksmith. I tried to dig a trange but it did not work out.
Get a J O B
doug bain solid advice
Hey brother!!
Satsri akal do u have any contact details
What is your requirement..
No music credits? I can tell you right now this isn't NCS and you are copy righting the rights to music you don't own. smh
Horrible Recording