Lamzu Atlantis is by far the most shockingly impressive mouse for a companies first.. was so fortunate to get sent one. The Huano pink dot click implementation is perfect imo. And you didn’t even mention the unboxing experience it’s insane.
This is THE review you need when deciding between these. I unfortunately bought the x2 before checking too many reviews (lamzu was out of stock), and i don't like the mouse, it feels too small (the back should be bigger) even though i have small hands and YES, the sides don't have enough character to them, it feels like aiming with a 55g brick most of the time. Also the m1 and m2 are way too clicky and loud for my taste Props for Lamzu and i hope they can get more in stock soon
hello, i really need your advice, i don't like the tight pressing of the middle wheel on the lamza, and i'm going to change the switch that is responsible for clicking on the wheel ( YSA switch, cant even find info about it) , i can't decide on the choice of TTC GOLD 30, 60, 80m, which are easier to press? I very often use the wheel to press (maybe even more often than LMB)
Had the X2 mini earlier in a aggressive claw grip but without the palm touching. The flat sides were pain, I’ve got relatively small hands but gave the lamzu a go in a regular aggressive claw and it feels great so far
lol i was just going to ask if x2 mini might be good for aggressive claw don't you think lamzu atlantis is too big? how big are your hands and why didn't you wait for the Atlantis mini
@@shelful5256 like 18x9.5, had so send my x2 back for the 2nd time and didnt have a mouse just had to get something😅 But I’m quite satisfied with the lamzu so far, did also try the MM712 but the front off the mouse kept lifting up and really put me off
@@albingoh ty for the quick answer can you maybe tell me what you mean by flatter side, so what's that, your problem, so I've heard that before, so you definitely can't recommend x2 mini, right?
@@shelful5256 basically the lamzu slopes in where u would have ur fingers curled in an aggressive claw making it more comfortable, whilst the x2 is like a brick, however a fingertip grip with straight fingers would be great for it
i also experiecing similar issues here, my hand size is 19x10,5 cm and currently using X2 Mini right now, the problem is my aim isn't really consistent since the clicker position is too low and also the hump feels a little bit too low for me so it doesn't grip well on my hand, thinking about getting Lamzu Atlantis, what do you think?
Tried out the xm1r, superlight, g303, and many other mice. Never found out I was an aggressive claw user until I used the 303se. I have high hopes for the Lamzu Atlantis.
@@niikitosys Oh, for sure. I still use it to this day. Tried other mice since then like the Deathadder v3 and always come back to the lamzu. I have 18.5cmx9cm hands for reference.
@@sergiomendiola4611 Holy we have the exact same size hands but i am using xm1r ANd I dont like it that much its alright but I ordered a lamzu atlantis mini 4k and I am waiting!
Interesting to see a mouse come out with the blue shell pink dots you replaced on my g303 for me. Might be worth picking one up one day now that I’m already accustomed to the way they feel.
Thanks bro. What is better lamzu or xm2w? I tried xm1r and I really like her shape. We are currently unable to buy xm2w How different are they? I can buy a lamza even now, but not xm2w🙏🙏🙏 I appreciate you
@@entsfps Oh, you dont like the S2 but love the XM1 shape? With Lamzu being similar to XM1, I wondered how much similarity Lamzu kept with the S2. Ty for the reply!
Yeah the middle mosque button on the Lamzu is way too heavy. I move my mouse slightly whenever I click it. Probably the heaviest middle click on any mouse I've used.
my two main mice are g pro and xm1 and i dont like the xm1 as it forces me into aggressive claw should i go for x2 then thanks man best review tbh ive watched every single one believe me
Hey it's off topic as it's not about the Superlight but I was wondering if you could give me some insight on what I did wrong. I tried soldering new switches onto my Superlight for the first time and my issues is that the switches, mouse scroll and side buttons work when the pcb is in the air but by the time I screw the pcb in it stops working. I've tried 2 switches on each side as well. Do you have any idea what could be happening?
Yeah the clip is secured on both ends fully in. And with shorting the pcb with screws would make sense however it stops working even before I screw it in. Putting it in place onto the mouse is enough to make it not work.
@@ZoReLeveL sounds like the position the pcb rests in is a bad position for the ribobn cable. check the cable and see if theres any bends or anything. i reinforce mine with tape on both sides to keep it from crimping.
@@entsfps it bends for the top pcb no matter how much tape I put on unfortunately. Just put it back together with taped ribbon cables. It sort of bends still but it's not a full 90 degree flat bend. Maybe I can upload some pictures to imgur? If it makes it easier
when will the atlantis restock in eu? (maxgaming) In maxgaming's website it says 29 of october, but that sounds like a LOT of time. They might be right tho🤷♀
I enjoy the shape of g304/g305 (a relaxed claw grip I would say) and now looking for a replacement. Should I go for Lamzu Atlantis mini or Pulsar X2 mini.
Which of the two mice would you suggest getting if the grip style is in between a relaxed claw and aggressive claw and the hand size is on the medium side?
For an S2 main, who thinks the sides are a bit too narrow, which one do you think would suit me better? On Paper it seems to be the X2 but I´ve see people saying the Atlantis would be a safer option
Just reinforced that I’m going for the lamzu instead. I’m an aggro claw user on the g303 SE atm and I’m super pumped to try the lamzu. Just seems like it’s going to fit right in my hand
Hey! I have 18cm x 9.5cm, and I play a relaxed claw type grip on a RVM. Would the x2 fit me? Or should I try the lamzu because I've never tried that shape. Which do you think would be better?
@@entsfps Thanks. And do you know of any debounce issues with kailh silent mouse switches? Is there a specific model number for these? The only ones I'm finding are the little square ones, which do not look like the rectangular 3 prong ones I'm used to seeing in Razers.
Lamzu Atlantis is by far the most shockingly impressive mouse for a companies first.. was so fortunate to get sent one. The Huano pink dot click implementation is perfect imo. And you didn’t even mention the unboxing experience it’s insane.
(shocking)
@@HitokiriShin (shocking) (gone wrong)
I think they are too heavy and rebound too much the np01s implementation is way better imo.
I agree the Lamzu is next level. It feels so good....The only other mice that feel as good to me is. GPX and Starlight Tenz Small
Agreed
Viper V2 Pro and DAV3 are still superior and the best on the market in my opinion.
@@charekuu they definitely have the best tech rn but shape is still king
This is THE review you need when deciding between these.
I unfortunately bought the x2 before checking too many reviews (lamzu was out of stock), and i don't like the mouse, it feels too small (the back should be bigger) even though i have small hands and YES, the sides don't have enough character to them, it feels like aiming with a 55g brick most of the time. Also the m1 and m2 are way too clicky and loud for my taste
Props for Lamzu and i hope they can get more in stock soon
And this is coming from a Model O wireless user
What is your hand size? I have small hands too & thinking of getting the lamzu
@@enryu6175 Well it's not tiny but i don't think i've ever had bigger hands than others my age. it's like between small and medium i guess
Great comparison, exactly what I wanted to know, ty
hello, i really need your advice, i don't like the tight pressing of the middle wheel on the lamza, and i'm going to change the switch that is responsible for clicking on the wheel ( YSA switch, cant even find info about it) , i can't decide on the choice of TTC GOLD 30, 60, 80m, which are easier to press? I very often use the wheel to press (maybe even more often than LMB)
ttcgold 30m would be your best bet
Nice vid! Hoping the Atlantis gets restocked
Follow Lamzu on twitter! They said they sent more stock to Addice recently
Had the X2 mini earlier in a aggressive claw grip but without the palm touching. The flat sides were pain, I’ve got relatively small hands but gave the lamzu a go in a regular aggressive claw and it feels great so far
lol i was just going to ask if x2 mini might be good for aggressive claw don't you think lamzu atlantis is too big? how big are your hands and why didn't you wait for the Atlantis mini
@@shelful5256 like 18x9.5, had so send my x2 back for the 2nd time and didnt have a mouse just had to get something😅 But I’m quite satisfied with the lamzu so far, did also try the MM712 but the front off the mouse kept lifting up and really put me off
@@albingoh ty for the quick answer can you maybe tell me what you mean by flatter side, so what's that, your problem, so I've heard that before, so you definitely can't recommend x2 mini, right?
@@shelful5256 basically the lamzu slopes in where u would have ur fingers curled in an aggressive claw making it more comfortable, whilst the x2 is like a brick, however a fingertip grip with straight fingers would be great for it
i also experiecing similar issues here, my hand size is 19x10,5 cm and currently using X2 Mini right now, the problem is my aim isn't really consistent since the clicker position is too low and also the hump feels a little bit too low for me so it doesn't grip well on my hand, thinking about getting Lamzu Atlantis, what do you think?
how is the atlantis for palm grip..
Lamzu, the one downside here the feet on the back, they are too small
The mouse can tilt here a little bit, But the feeling of holding can be felt.
Tried out the xm1r, superlight, g303, and many other mice. Never found out I was an aggressive claw user until I used the 303se. I have high hopes for the Lamzu Atlantis.
and you liked Lamzu Atlantis?
@@niikitosys Oh, for sure. I still use it to this day. Tried other mice since then like the Deathadder v3 and always come back to the lamzu. I have 18.5cmx9cm hands for reference.
@@sergiomendiola4611 Holy we have the exact same size hands but i am using xm1r ANd I dont like it that much its alright but I ordered a lamzu atlantis mini 4k and I am waiting!
Interesting to see a mouse come out with the blue shell pink dots you replaced on my g303 for me. Might be worth picking one up one day now that I’m already accustomed to the way they feel.
kinda cool a bunch of mice use my favorite switches now :)
@@entsfps yeah glad some companies took notice of all the great switch options.
Thanks bro. What is better lamzu or xm2w? I tried xm1r and I really like her shape. We are currently unable to buy xm2w
How different are they? I can buy a lamza even now, but not xm2w🙏🙏🙏 I appreciate you
both are super nice, get whatever one you can. they are extremely similar so owning both is a bit silly. clicks on xm2we are a bit heavy imo
So pretty 😍
I choose switches for gpx without double clicks, do you recommend Kalih GM 8.0 or TTC gold v2?
ents.win/faq
thanks for the comparison! how's the lamzu compared to Zowie S2?
I don't love the S2 shape, check for XM1 vs S2 videos -- Lamzu shape way better imo
@@entsfps Oh, you dont like the S2 but love the XM1 shape? With Lamzu being similar to XM1, I wondered how much similarity Lamzu kept with the S2. Ty for the reply!
Yeah the middle mosque button on the Lamzu is way too heavy. I move my mouse slightly whenever I click it. Probably the heaviest middle click on any mouse I've used.
Had my X2 for a few days and it's developed a weird squeaking sound on some left clicks, so I'm tempted to send it back and pick up the Lamzu Atlantis
known/common issue on the x2
my two main mice are g pro and xm1 and i dont like the xm1 as it forces me into aggressive claw should i go for x2 then thanks man best review tbh ive watched every single one believe me
yes you have come to the correct conclusion! the x2 would be a better fit for you
@@entsfps marvelous
Hey it's off topic as it's not about the Superlight but I was wondering if you could give me some insight on what I did wrong. I tried soldering new switches onto my Superlight for the first time and my issues is that the switches, mouse scroll and side buttons work when the pcb is in the air but by the time I screw the pcb in it stops working. I've tried 2 switches on each side as well. Do you have any idea what could be happening?
U might be shorting ur pcb with the screws? U might've messed up the insulators or something
make sure the ribbon cable is all the way in and the clip is secured
Yeah the clip is secured on both ends fully in.
And with shorting the pcb with screws would make sense however it stops working even before I screw it in. Putting it in place onto the mouse is enough to make it not work.
@@ZoReLeveL sounds like the position the pcb rests in is a bad position for the ribobn cable. check the cable and see if theres any bends or anything. i reinforce mine with tape on both sides to keep it from crimping.
@@entsfps it bends for the top pcb no matter how much tape I put on unfortunately. Just put it back together with taped ribbon cables. It sort of bends still but it's not a full 90 degree flat bend. Maybe I can upload some pictures to imgur? If it makes it easier
I have 17cm x 9cm hand size would this be too big for me, i had the xm1r & it wasn’t too big or should I wait for the mini
If you like the XM1's size, this is almost identical so it should be good
@@entsfps is the lamzu the exact same size or smaller or longer
@@enryu6175 www.eloshapes.com/index.html?mouse=Endgame%20Gear%20XM1r&mouse=LAMZU%20Atlantis
my hand size is 20x10 claw grip Lamzu Atlantis or Pulsar x2. which one would you recommend?
i like the atlantis, but if you aggro claw like me, thats prob the best, if youre more relaxed/straight fingers, you may like the x2
when will the atlantis restock in eu? (maxgaming) In maxgaming's website it says 29 of october, but that sounds like a LOT of time. They might be right tho🤷♀
i had the x2 mini and lamzu and i prefer the shape of the lamzu even though i prefer a smaller mice, sold both and now waiting for the lamzu mini.
the mini should be a beast
I enjoy the shape of g304/g305 (a relaxed claw grip I would say) and now looking for a replacement. Should I go for Lamzu Atlantis mini or Pulsar X2 mini.
if you like egg shale why not the fantech aria?
@@entsfps I tried it before but it feels a lot bigger than g304/g305, so I am looking for other mouses
Hello,
I have the x2 and many times I accidentally right click. Can someone tell me if the lamzu switches are less sensitive?
Thanks
Hello, I use the FK2 and would like to know if the mouse is something for me? Use the mouse in Relaxed Claw or Palm grip. Thx 😊
you can compare shapes on eloshapes.com
Which of the two mice would you suggest getting if the grip style is in between a relaxed claw and aggressive claw and the hand size is on the medium side?
when you hold your mouse are your fingers mostly straight or mostly curled? if straight the x2, otherwise atlantis
For an S2 main, who thinks the sides are a bit too narrow, which one do you think would suit me better? On Paper it seems to be the X2 but I´ve see people saying the Atlantis would be a safer option
i think the atlantis too. the x2 is a good bit skinnier
Just reinforced that I’m going for the lamzu instead. I’m an aggro claw user on the g303 SE atm and I’m super pumped to try the lamzu. Just seems like it’s going to fit right in my hand
And you liked?
hello i need your advice , i wanna buy this x2 mini but i love my g403 shape so can u give me a mouse that have same shape like g403 ?
death adder v3
Hey! I have 18cm x 9.5cm, and I play a relaxed claw type grip on a RVM. Would the x2 fit me? Or should I try the lamzu because I've never tried that shape. Which do you think would be better?
if your fingers are straight, try the x2, if they are curled, try the atlantis
@@entsfps thanks. Just one more thing, would it be better to buy a x2 now or wait till the QC is better?
@@detimzhao7510 you can buy one now from amazon and return it if its bad quality and you get to test the shape that way
@@entsfps oh thanks. I didn't even know it was on amazon
ive heard that the lamzu feels abit thinner than the xm1. is this true? and by how much?
yes and an extremely small amount. i didn't notice it until directly comparing
Isn't the atlantis longer than the xm1 by a significant amount?
its 1mm longer, so essentially exactly the same -- see here www.eloshapes.com/index.html?mouse=Endgame%20Gear%20XM1r&mouse=LAMZU%20Atlantis
@@entsfps Ahh thought the XM1 was like 18mm at length
@@entsfps Are you using palm claw? Your hands look big.
does lamzu fit palm claw?
depends on a lot of factors, but id generally say yes
Do you have any suggestions for silent/quiet switches? I'm trying to swap out my Mamba because they debounce like crazy and are also too loud.
the kailh silents are the only ones, the rest all basically sound the same
@@entsfps Thanks. And do you know of any debounce issues with kailh silent mouse switches? Is there a specific model number for these? The only ones I'm finding are the little square ones, which do not look like the rectangular 3 prong ones I'm used to seeing in Razers.
@@jme2006 they are 2 pin. and they work. no debounce issues that i know of
Do you sell pre modded GPX's ?
Sure, get in touch ents dot fps at gmail