Kawasaki 4010 mule propshaft rebuild

Поделиться
HTML-код
  • Опубликовано: 27 ноя 2024

Комментарии • 11

  • @2Henhouse
    @2Henhouse 10 месяцев назад

    Does the front differential yoke slip off like the two on the rear driveshaft? I've got the rear driveshaft removed but so far cannot get the front differential yoke to budge! tried pry bars but can't move it so far. What a pain this whole operation is. Didn't know this was bad when I bought it last month. I get a clickety sound at higher speed but it goes away in 4WD.

  • @jcarney42
    @jcarney42 Год назад +2

    Well, that’s one way

  • @jeanpautot1796
    @jeanpautot1796 Год назад

    No es facil de travarar en la mulita.

  • @corrupt_8383
    @corrupt_8383 Год назад

    How did you get sshaft back in is there a trick to it

  • @blacklisterd
    @blacklisterd 2 года назад

    👍

  • @jeanpautot1796
    @jeanpautot1796 Год назад

    No ensenia que nesecita remover el tanke de combustible et una parye del piso.

  • @DrSmokeBBQ7269
    @DrSmokeBBQ7269 Год назад

    And there goes your pinion seal 🤣. You're better off taking the tank out and pushing the carrier bearing to the frame. The whole shaft will come off

    • @GRTRanchadventures
      @GRTRanchadventures  Год назад

      Pinion seal was fine still not leaking as of this reply, I did take the fuel tank out as shown in the video but that was not enough room to remove the shaft in my experience if you have a reference to a video showing a better way I would love to watch it. I looked before I started this project but could not find anything useful, thanks for the comment if there is a better way I would love to show everyone dealing with this repair 🥰