HOW TO CALCULATE VERNIER READINGS OF THEODOLITE AND LEAST COUNT

Поделиться
HTML-код
  • Опубликовано: 1 ноя 2024

Комментарии • 142

  • @a.prabhukumar4985
    @a.prabhukumar4985 5 лет назад +20

    Thank you brother for the best explanation. I strongly believe that "you are a great civil engineer"

  • @sammednagtode181
    @sammednagtode181 5 лет назад +6

    There are many videos out there on RUclips but ur one was truly what I was finding for ❤❤❤✌✌✌✌

  • @arunsiddhpura7040
    @arunsiddhpura7040 5 лет назад +3

    For the reading on vernier it clearly shows 5 minute exactly matching with main scale. We should judge from the main scale where our index is and judge from that what approximate seconds reading would be. Then look at that approximate seconds reading and you will find the matching line from vernier to main main scale. ( This is based on the figure used by the lecturer.) see the location on the index lying on between the minutes reading and you will find that it is at quarter distance away from the 20 minutes that is approximately 5 minute and see it is matching at 5 and 40 seconds and not 20. So total angle is 10 degree 25 minutes and 40 seconds not 10 degrees 40 minute. Has it been 40 minutes the index would exactly touch on main scale at 40 minutes. As you can see it is not so. The effort however is good.

  • @debanjanroychoudhury2173
    @debanjanroychoudhury2173 Год назад +1

    Thank you 🙏🏻 so much sir 😊😊

  • @kiranraokashyap4712
    @kiranraokashyap4712 4 года назад +1

    Sir aapke sarre video helpful hote hai and your voice 👌👍😍

    • @civilengineerfbh277
      @civilengineerfbh277  4 года назад +2

      Thanks I appreciate

    • @kiranraokashyap4712
      @kiranraokashyap4712 4 года назад

      @@civilengineerfbh277 😊

    • @civilengineerfbh277
      @civilengineerfbh277  4 года назад

      Phali baar kise na tareef ke 😊

    • @kiranraokashyap4712
      @kiranraokashyap4712 4 года назад

      @@civilengineerfbh277 hanji sir aap batate bahot achhe se hai mujhe classroom me sir batate hai to samjh nii aata but aapki video dekh leti hu to samjh me aa jata . .... So your video is to good and very helpful 👌👍

  • @Akash-nv6ms
    @Akash-nv6ms 5 лет назад

    Sir apni khub valo vabe bojan akbar sunlai mone thake great sir

  • @vedantsuryawanshi2920
    @vedantsuryawanshi2920 2 года назад +1

    Thank you for your valuable explanation and crystal clear concept conveyance. It really made the topic easy.
    #KEEP UP THE GOOD WORK💐 😃🍫

  • @subhjana
    @subhjana 2 года назад +1

    Thanks for uploading this video..,.

  • @AbrarWani434
    @AbrarWani434 8 месяцев назад

    I was really helpful one day before exam

  • @amitchakraborty1009
    @amitchakraborty1009 6 лет назад

    thanks sir tuition jane ke Zaroorat he nahi ghar mein padhai hoti because of you

  • @Sabanakhatun8436
    @Sabanakhatun8436 Год назад

    Lot of thanks to you sir
    Excellent...

  • @parthdodiya7468
    @parthdodiya7468 5 лет назад

    Are ap to bhagvan hai college se zyada apke vidio dekhne me accha hai keep it up banate rahiye vidio and thank you 🙏

  • @kunalkhandelwal4570
    @kunalkhandelwal4570 3 года назад +1

    It will suffice the work that a civil engineer would be doing in the field, so thanks for that. But, I would suggest that you should also explain the logical reasoning behind the method; that would probably be called a better explanation.

  • @Tiny_Tint
    @Tiny_Tint Год назад

    thank you brother..very helpful video

  • @Singh_2397
    @Singh_2397 3 года назад +2

    Thank you so much my doubt cleared

  • @jaybaba745
    @jaybaba745 5 лет назад

    Very nice i got it completely for first time

  • @vikasmehta3789
    @vikasmehta3789 5 лет назад

    Sabhi topic clearly samj aa gaye sir ty u so much sir techeometery ka bhi vedio banana sir

  • @cookspecial8900
    @cookspecial8900 2 года назад +1

    Valo bujhiyechen

  • @anandun9262
    @anandun9262 3 года назад

    Very good information. Thank you sir

  • @samiullahkhursheed8140
    @samiullahkhursheed8140 6 лет назад

    Keep it More sir .
    Nice videos .
    Now I have no doubt in this topic .

  • @dipankarmandal7854
    @dipankarmandal7854 6 лет назад +2

    Sir.... If d is the smallest value of the main scale and v the smallest value of the vernier scale, then the least count of the vernier is given by....(1) d-v (2) v-d (3) d/v
    What is the right ans...and why....Please explain....Sir...

  • @shienlygracetorres199
    @shienlygracetorres199 2 года назад

    I can't understand the language huhuhu, I really need this one for my report in fundamentals of surveying......

  • @montusandil8563
    @montusandil8563 6 лет назад

    Ap bhat ache se samjhate hain. thanku sir

  • @sanakarina9937
    @sanakarina9937 2 года назад

    Thank you for this

  • @asingh97
    @asingh97 5 лет назад

    very nice video

  • @sanakarina9937
    @sanakarina9937 2 года назад

    Excellent yrr

  • @Crazykids-vb2dk
    @Crazykids-vb2dk Год назад

    Good explanation

  • @rabikumarbhagat7797
    @rabikumarbhagat7797 5 лет назад +2

    But sir. In horizontal angle there are two scale one is A and other is B.but you only told in scale A.not B

  • @tauqeeralam6130
    @tauqeeralam6130 4 года назад

    Apka method kafi achha hai, agar apke pass hard copy hai to kya ap maile kar sakte hai.

  • @jogindersethi5959
    @jogindersethi5959 6 лет назад

    you have made a very nice video and good explanation

  • @gayathrim4063
    @gayathrim4063 3 года назад

    Lot's & lot's of tq sir.................

  • @SharathBilla
    @SharathBilla 5 лет назад

    Very good explanation.... Nice

  • @rampratapmaurya2681
    @rampratapmaurya2681 3 года назад

    Great

  • @jibachhsahani3087
    @jibachhsahani3087 5 лет назад +1

    Thanks you so much...

  • @MohitKumar-gp9vx
    @MohitKumar-gp9vx 6 лет назад +1

    Sir Please explain by using instrument so it could understand more effectively..... further anything you explain by using the instrument at the site...

    • @civilengineerfbh277
      @civilengineerfbh277  6 лет назад

      Mohit Kumar bro it is difficult because ur camera can not focus on the small divisions of scale. As the are hardly see by open eye

    • @MohitKumar-gp9vx
      @MohitKumar-gp9vx 6 лет назад

      I think you are right sir...overall nice video..

  • @pawanbisht6757
    @pawanbisht6757 3 года назад

    Thank you bhai ji

  • @India1s
    @India1s 7 месяцев назад

    Good 👍

  • @krishnamuraribarnwal8426
    @krishnamuraribarnwal8426 6 лет назад

    Thank you ...
    Plz make a video on profile levelling sheet making sir

  • @aatifaslam5920
    @aatifaslam5920 6 лет назад

    Very good sirji
    This video was must needed

  • @shibashissahoo69
    @shibashissahoo69 3 года назад

    a theodolite circle is divided into degrees .the degrees are divided into 2 equal parts. design a direct vernier and retrograde vernier to read upto 30 seconds? iska value kaise nikal na hei?

  • @lovelystar8986
    @lovelystar8986 3 года назад

    Do same type of video on prismatic compass scale

  • @amanjaat186
    @amanjaat186 6 лет назад

    nice explanation of reading measurement from theodolite

  • @ritubansal1332
    @ritubansal1332 5 лет назад

    Sir Jo aap na ya last Vala scale kaise kiya

  • @RahulKumar-vi5th
    @RahulKumar-vi5th 4 года назад +1

    How vernier scale division with 60 sir..

  • @mahisharma4946
    @mahisharma4946 5 лет назад

    Thankyou it is very helpfulk

  • @yunusjamadar6890
    @yunusjamadar6890 5 лет назад

    Thank you bhai

  • @rajaryanvarshney4085
    @rajaryanvarshney4085 5 лет назад

    thanx you sirl
    for such videosl

  • @walki1317
    @walki1317 6 лет назад

    Can u make video on how to take reading on vertical circle

  • @rahulladse9091
    @rahulladse9091 3 года назад

    Nice

  • @dhananjaysingh1814
    @dhananjaysingh1814 5 лет назад

    Sir mja aa gya

  • @lakshmeeshalakshman5978
    @lakshmeeshalakshman5978 5 лет назад +1

    Thank you sir good work

  • @JamunaKhan-s3q
    @JamunaKhan-s3q 9 месяцев назад

    👍🏻👍🏻👍🏻

  • @JrN53030
    @JrN53030 5 лет назад

    I am from nepal
    Nice sir i also need it

  • @shreejicreation07
    @shreejicreation07 5 лет назад

    Suberrb bhai 👮👑

  • @SalimKhan-vd5cu
    @SalimKhan-vd5cu 6 лет назад +1

    Nice video sir

  • @Bablukumar-zi9we
    @Bablukumar-zi9we 5 лет назад

    Super

  • @arambamchanunganthoibi9535
    @arambamchanunganthoibi9535 5 лет назад

    Can u do it for prismatic compass

  • @technicalmandyalji8188
    @technicalmandyalji8188 5 лет назад

    Nice job

  • @shivanisanap26
    @shivanisanap26 Год назад

    Thanks🙏

  • @sanjaybarman7041
    @sanjaybarman7041 5 лет назад +1

    Thank you sir

  • @uttampandit6733
    @uttampandit6733 5 лет назад

    Helpful video sir

  • @kaushikdeval931
    @kaushikdeval931 6 лет назад

    Very nice video sir !!!
    Thanks

  • @marysameera1306
    @marysameera1306 5 лет назад

    How to read the reading for vertical angle?

  • @rajbeersingh3411
    @rajbeersingh3411 Год назад

    Thanku

  • @rinkisingharoy5304
    @rinkisingharoy5304 Год назад

    Thanks

  • @mrnoor2309
    @mrnoor2309 6 лет назад

    Sir keep going ... Masha Allah wareh asal ...... And thode aur practicals perform kijiye naa....

  • @manojnauliya6621
    @manojnauliya6621 5 лет назад

    Nice work sir g

  • @amritaarai1867
    @amritaarai1867 2 года назад

    Thank u

  • @kunadurgaprasad4046
    @kunadurgaprasad4046 2 года назад

    ❤️

  • @sayeeshbhalare3361
    @sayeeshbhalare3361 5 лет назад

    I think their is a mistake in the video , if minutes readings are same then they shouldn't be added . For example in first case 10°20'0"+20'0"=10°20'0".
    But whereas you have given 10°40'0". Pls do check it.

  • @allubang
    @allubang 5 лет назад

    Love you sir we always with you

  • @famidasyed806
    @famidasyed806 5 лет назад

    Good work helpful content

  • @jomargako5721
    @jomargako5721 3 года назад +2

    Language barrier tho, it's hard for me😭. This Online class is ********

  • @saadansari6026
    @saadansari6026 5 месяцев назад

    Thanks brah

  • @rutikbongale440
    @rutikbongale440 3 года назад

    Thank you 🙏

  • @cetarget3608
    @cetarget3608 Год назад

    Oh bhai division kaise pta chalta h

  • @ranjitsardar1986
    @ranjitsardar1986 5 лет назад

    Nice sir..

  • @civilengineering4863
    @civilengineering4863 6 лет назад

    thanku sir this was very importent

  • @faizanbinhassan8855
    @faizanbinhassan8855 6 лет назад

    awesome video sirji

  • @mohammadsiddiqamon2696
    @mohammadsiddiqamon2696 5 лет назад

    Thanks a lot.

  • @thesarcasticengineer7
    @thesarcasticengineer7 5 лет назад

    👍👍👍👍

  • @belodushanthakumari3030
    @belodushanthakumari3030 5 лет назад

    Thank you & super sir

  • @kailashsarnayak4566
    @kailashsarnayak4566 4 года назад

    Thank you so much

  • @ashutoshdubey62
    @ashutoshdubey62 6 лет назад

    Good sir keep it up 👍👍

  • @dhillonbaz5385
    @dhillonbaz5385 4 года назад

    Tu suryevor kyo nhi keha assi surveyor de student aa

  • @reshinayeem6025
    @reshinayeem6025 3 года назад

    Bhai kashur chukh shayad

  • @jeetram9086
    @jeetram9086 5 лет назад

    Bhai kha se ho

  • @choudharysatyanarayan9195
    @choudharysatyanarayan9195 4 года назад

    your accent is similar to j&K peoples

  • @dhensumili4756
    @dhensumili4756 5 лет назад

    Please provide english captions, asians and westeners cant understand what you are saying

  • @dreamerpokemonunite371
    @dreamerpokemonunite371 6 лет назад +1

    Sir aap Kashmiri ho?? Any way nice..thanks

  • @saumyadesignandconstructio2309
    @saumyadesignandconstructio2309 5 лет назад

    Thanku sr

  • @saqibsyed6398
    @saqibsyed6398 6 лет назад

    I can understand sir

  • @errathodjignesh8995
    @errathodjignesh8995 6 лет назад

    achaa hai sir...

  • @pankajwaje2860
    @pankajwaje2860 5 лет назад

    Thanks bro

  • @dilipkapadi2637
    @dilipkapadi2637 5 лет назад

    Thanks..sir...

  • @DilipGudiya-Shivansh
    @DilipGudiya-Shivansh 6 лет назад

    Sir apaka vedio achh lga

  • @badboy-zz9ug
    @badboy-zz9ug 6 лет назад

    Nice video

  • @olwethuowlor8705
    @olwethuowlor8705 6 лет назад

    how to calculateformuler chang in h by using this
    change in h=H+i-m

  • @aaaazzzzaaaadddd
    @aaaazzzzaaaadddd 6 лет назад

    I want a job for Land Surveyor.

  • @flashcahayag7060
    @flashcahayag7060 5 лет назад +3

    ITS USELESS AT THIS POINT SINCE I CANT UNDERSTAND WHAT YOUR SAYING "ENGINEER"