@@justinlee-lc6ypI saw this video from Ents channel, I think if we snap and solder the legs like its described here it can be possible. What do you think? ruclips.net/video/zc6VthQiELU/видео.html
Just for anyone looking for info, the side switches are right-angled Huano black shell white dots. They're plastic riveted onto the PCB, so you have to either cut or melt them off to remove them You can technically swap them by cutting the legs of the switch where they bend, and solder the new ones onto there, which is what I did. But I highly recommend NOT doing this mod as the Huano brown shell yellow dots I'm now using as side switches honestly feel like trash. I'd buy a new one if I had that kind of money to throw around but oh well
Good day, at the beginning of the video, do you hear a clicking sound when you check the spaces between the clicks with small touches? I can feel the gaps between the R1 mouse I just bought, there are small clicks. Is this mouse something special or is my product defective? like a squeaking noise
This kind of problem is a motherboard problem. It is recommended to contact the mouse after-sales service to solve this problem. Repairing it yourself is equivalent to giving up after-sales service.
@@Jasketch In China, the cost of repair is already greater than the value of the mouse. If you are abroad, the cost will be higher. It is recommended to give up and replace the mouse directly.
Good video, I think mine came with this long cable a little loose, because when I shake it it makes a noise like a loose cable, except it the mouse is perfect
Hello my friend, i bought one of these R1 SE and the right click is making a squeaking noise, it works but the noise is very irritating, you know how can i fix it? my mouse has less than a week of use and started making this noise
Thanks for your comment, the easiest way is to buy the same battery socket, measure the size, and then look for the same size socket. Of course, another method is to cut off the battery wires, then connect them with the same color and insulate them, and then plug them into the mouse motherboard using the original interface.
Greetings, sir. Can you please advise me? I ordered 2 pieces of VXE R1 SE. 1 of them does not work from battery. If you connect the mouse to the usb wire is constantly lit green LED, but should blink red (charging). Also, when disconnected from the wire, the mouse does not respond to switching modes 2.4/BT. I have a feeling that the battery was not connected at the factory, or everything is even worse. What recommendations can you give? Is it possible that they forgot to plug the battery into the connector? 😂 Or it's more likely that the problem is in the hardware? 😢
Hello, thank you for your message. I think it's the motherboard or battery. Batteries are usually new, so I'm more inclined to think it's a motherboard or receiver problem. I suggest you contact after-sales service to solve this problem. Don’t try to repair it yourself, because the new mouse has warranty
hello is there any way i can make the pcb hot swappable for other switches? i like the shape of the mouse i just want to experiment with other mouse switches
У Kailh Silent есть тактильные ощущения от нажатия, в отличие от этих Huano Silent, поэтому Kailh Silent будет хоть и немного, но слышно. Также Huano Silent нужно удерживать до упора при выделении текста, иначе кнопка не будет считывать нажатие.
@@justinlee-lc6yp «Kailh Silent» обладает тактильной отдачей, которая ощущается как удар в палец. Это создает характерный звук. «Huano Silent» не обладает тактильной отдачей. Для выделения текста «Huano Silent» необходимо удерживать клавишу практически до упора, иначе нажатие прекратится. Из-за этого «Huano Silent» я не рекомендую использовать для игр.
Sir, do you know what the problem is it, i got the vxe r1 se when i use it with dongle, sometimes it flashing green led and the sensor freeze, after the green led is off the sensor work again, and the error still happen when i use dongle connection after many minutes, do you know how to fix it?, thank you sir
Does this problem occur when you use the dongle and mouse receiver at the same time? If you unplug the dongle and only use the mouse receiver, will there be the problem you mentioned?
the only video on internet on r1 teardown 🙌 thank you
不客气
Does the VGN F1 board fit in this shell?
Great video. Any ideas on what the side switches are? I was wondering if I can replace them with Huano blue shell pink dot
Thanks for your message. The side switch cannot be replaced because they have curved legs.
@@justinlee-lc6ypI saw this video from Ents channel, I think if we snap and solder the legs like its described here it can be possible. What do you think?
ruclips.net/video/zc6VthQiELU/видео.html
thanks my goat 谢谢
不客气
Good video. Thanks for sharing.
Glad to help you
Is there a silent switch alternative for the scroller switch? I would prefer all silent clicks.
Kailh Silent.
Just for anyone looking for info, the side switches are right-angled Huano black shell white dots. They're plastic riveted onto the PCB, so you have to either cut or melt them off to remove them
You can technically swap them by cutting the legs of the switch where they bend, and solder the new ones onto there, which is what I did. But I highly recommend NOT doing this mod as the Huano brown shell yellow dots I'm now using as side switches honestly feel like trash. I'd buy a new one if I had that kind of money to throw around but oh well
Good day, at the beginning of the video, do you hear a clicking sound when you check the spaces between the clicks with small touches? I can feel the gaps between the R1 mouse I just bought, there are small clicks. Is this mouse something special or is my product defective? like a squeaking noise
你好，你所描述的这个问题，我这个鼠标也有，轻量化鼠标外壳太薄了，会有一些异响的情况，当然这跟它比较便宜，成本低有关系。可以通过垫特氟龙胶带来防止异响，但是这对于一些新手来说有一定的难度，建议如果接受不了异响就退掉这个鼠标，买罗技或者雷蛇鼠标。
just swapped my original white sword switches for huano pink dot ones, had issues with double click before
후아노 블루쉘 화이트닷이 기본 스위치군요. 영상 감사합니다.
what size jst connection does this have?
Very informative. Kudos
Glad to help you
is there any alternative switch for right and left switches? my preferences is silent clicks.
无声开关比较少，可以换一下华诺无声微动。
@justinlee-lc6yp other than huano, is there any alternative? it's okay if it's not silent switches
So good ❤
Amazing video brother, I wanted to know if the battery is replaceable. It is good to know it is not soldered on. Thank you!
Yes it's replaceable and upgradeable.
My VXE dragonfly R1 suddenly stops working with wired attached. it doesn't charge too. what should I fix with the motherboard?
This kind of problem is a motherboard problem. It is recommended to contact the mouse after-sales service to solve this problem. Repairing it yourself is equivalent to giving up after-sales service.
@@justinlee-lc6yp If ever there is no more warranty to the item. do you have a tutorial how to fix the motherboard? thank you so much for responding!
@@Jasketch In China, the cost of repair is already greater than the value of the mouse. If you are abroad, the cost will be higher. It is recommended to give up and replace the mouse directly.
Good video, I think mine came with this long cable a little loose, because when I shake it it makes a noise like a loose cable, except it the mouse is perfect
确实，可以用一块双面胶把松动的排线粘到外壳里面，就不响了
Hey, i bought one r1 se and it constantly disconnects while on 2.4 ghz mode, is there anything i can do to fix this?
I suggest you contact after-sales service
Does swapping switches void Warranty.. ?
是的，这种会直接失去保修
Hello my friend, i bought one of these R1 SE and the right click is making a squeaking noise, it works but the noise is very irritating, you know how can i fix it? my mouse has less than a week of use and started making this noise
Open the mouse to find the location of the abnormal sound. Use Teflon tape to tape abnormal sound enclosures
hello sir, i want to ask can you change the battery for a bigger mAH battery? if yes what lipo battery it uses and what connector is it
Thanks for your comment, the easiest way is to buy the same battery socket, measure the size, and then look for the same size socket. Of course, another method is to cut off the battery wires, then connect them with the same color and insulate them, and then plug them into the mouse motherboard using the original interface.
I am an r1 pro max user. Can you tell me which switch I should buy to replace the wheel?
Is the mouse failure caused by wheel rollback? ? Do you need to replace the roller encoder? Do I need to know the height of the roller encoder?
@justinlee-lc6yp probably need to replace the encoder. The wheel keeps going up and down.
Then replace the roller encoder@@feelohyeah_main
@@justinlee-lc6ypyes please
Do u know the size of the battery? Can u recommend me some sizes of 500mAh battery that i can switch to
只要外壳空间能放进去，就可以，如果接口不合适，直接用原厂的电线断开连上新的电池即可。
Hi, do you know if the type c port is replaceable?
可以换，但是由于需要多次插拔充电，改装的TYPE-C非常容易掉落。所以我还是不建议改装C口。
Greetings, sir. Can you please advise me?
I ordered 2 pieces of VXE R1 SE. 1 of them does not work from battery. If you connect the mouse to the usb wire is constantly lit green LED, but should blink red (charging). Also, when disconnected from the wire, the mouse does not respond to switching modes 2.4/BT.
I have a feeling that the battery was not connected at the factory, or everything is even worse.
What recommendations can you give?
Is it possible that they forgot to plug the battery into the connector? 😂
Or it's more likely that the problem is in the hardware? 😢
Hello, thank you for your message. I think it's the motherboard or battery. Batteries are usually new, so I'm more inclined to think it's a motherboard or receiver problem. I suggest you contact after-sales service to solve this problem. Don’t try to repair it yourself, because the new mouse has warranty
Hey, did you manage to solve it? I have the same issue
@@Szymeq7 Yes, I did. I opened it and the battery was not connected to motherboard lmao
@@entername6874 Thank you. I actually dropped mine but the symptoms are the same, so hopefully it's also a disconnected battery.
Hey man, how tall is the scroll wheel encoder? I have problem with my scroll wheel
It seems to be 9mm. Take it apart and take a look.
Do you know the PCB weight?
hello is there any way i can make the pcb hot swappable for other switches? i like the shape of the mouse i just want to experiment with other mouse switches
Thanks for your comment .This mouse can be modified to be hot-swappable, but this is not very simple.
@@justinlee-lc6yphow and where could I add the PCB, I see theres not enough space
can i use that switch for r1pro?
My R1 Pro has terrible left clicks but very good right clicks, Im so annoyed
There are indeed some problems with quality control.
what is the heigh of the encoder sir ?
9mm? or 11mm。 I am not sure right now。
Sir also I wanted to know what is the height of the encoder wheel can you provide accurate measurement sir ❤
@ i use 11 it works
@@nguyenluan3890 which one can you provide me a name of wheel decoder or link
@@nguyenluan3890 can you tell me name of the encoder which one you use that
У Kailh Silent есть тактильные ощущения от нажатия, в отличие от этих Huano Silent, поэтому Kailh Silent будет хоть и немного, но слышно. Также Huano Silent нужно удерживать до упора при выделении текста, иначе кнопка не будет считывать нажатие.
我没太看明白，你是说kailh silent 还是有声音，并不能完全静音？ 选择文本是拖动文本吗？要一直按住按键吗？
@@justinlee-lc6yp «Kailh Silent» обладает тактильной отдачей, которая ощущается как удар в палец. Это создает характерный звук.
«Huano Silent» не обладает тактильной отдачей. Для выделения текста «Huano Silent» необходимо удерживать клавишу практически до упора, иначе нажатие прекратится. Из-за этого «Huano Silent» я не рекомендую использовать для игр.
Sir, do you know what the problem is it, i got the vxe r1 se when i use it with dongle, sometimes it flashing green led and the sensor freeze, after the green led is off the sensor work again, and the error still happen when i use dongle connection after many minutes, do you know how to fix it?, thank you sir
Does this problem occur when you use the dongle and mouse receiver at the same time? If you unplug the dongle and only use the mouse receiver, will there be the problem you mentioned?
Sorry sir, maybe there is a misunderstanding, I mean the 2.4GHz dongle from the mouse, and not another dongle. Maybe it's a production factory defect?
@@stvandw4167 I understand what you mean now. I think it’s also a factory problem.
what is the name of those silent switches?
HUANO华诺黄点静音微动开关无声三脚鼠标左右键按键力度60-70克，约0.65n左右，寿命2000万以上，手感好，静音效果好.
thanks for this got double clicks after 4 months of use sucks haha
4个月确实少了点，找售后或者自己换微动
무음스위치도있나요???
没有静音开关的版本，需要自己去改装静音微动。
pls disassembly daxa air II pro wireless.