hello Xim I play on Xbox series x tv 60 Hz (what Hz cup do I have to put in the Xim app and what Hz trace on my bloody A4 tech mouse that has memory ?? and the synchronization help me please
@@ximmatrixproplayers For the best polling rate (Hz) follow my "Best XIM Polling Rate" video. It heavily depends on your mouse and not the XIM. The video will show you how to measure the best polling rate for your setup. The synchronization is then up to you and it mainly depends on if you want more aim assist or a closer PC experience.
@@XIMCentral if I saw the complete video now I understand more the synchronization but my mouse and. The Xim app does not know what Hz to place, my mouse uses 3200 dpi and allows a Hz of 1000, 500 250 etc. I do not know if to place it at the same time hz you help me I do not know what it responds to use and if to put it it responds to the mouse rate and. xim
@@ximmatrixproplayers Hey, for that do a polling rate benchmark with your mouse to find out which polling rate is the best for your mouse and the XIM :).
So from what I understand on rainbow six siege it’s running on 60 fps so I would want to run synchronization on common but what would I set my polling rate to?
Hello od1n Which synchronisation mode offers the best accuracy with a mouse??? Does polling rate effect my mouse accuracy?? And what factors|settings can offer me the best mouse accuracy?? Ps5 120hz destiny 2
Hey, the best overall accuracy is probably provided by sync default. Yes the polling rate can affect your accuracy, in a negative way. If your mouse cannot consistently poll at the rate your XIM is set to then this can cause mouse stutter, which reduces your acciracy. The best mouse accuracy can be achieved by using the correct sensitivity, thats the most important aspect. A large share of players use sensitivities that dont match their dexterity level. Thats the main difference between PC Pros and normal gamers, the pros are using sensitivities that perfectly match their dexterity. My "ultimate mouse sensitivity" video shows a method on how to find your own most optimal sensitivity if you are interested in that.
I love these quick informative videos, thank you! So if I understand correctly, I would get the best aim assist quality/response by setting the xim polling rate to 125hz, and off sync for my hip/ads if I'm playing a game (cod/bf) that runs at 120fps? I've since switched to 250hz and off sync based on the info in the last video and it feels great, so if I understood right I'm excited to give this setup a try!
So am I correct in understanding….if I’m using an XBoxOne for R6, I should be using “common” sync instead of “default?” I believe the frame rate is 60fps for this game. I currently have my Corsair (3200dpi) mouse and Apex device set to 500Hz polling. I created a new config today after doing a full Apex games download. I’m using a standard 780p 60 Hz TV as my monitor. The setting feels fairly smooth. I’m pretty sure I got all these settings from a recent video of yours. After following the instructions in the mouse sensitivity video, I landed on a HIP sensitivity of 34. That seems about right.
I think the concept here is….Siege on XBoxOne will run at 60fps, one way or another. At some point in the chain, the data input will need to be whittled down to this. It sounds like if I leave the XIM on default, I’m leaving this scaling down to the XBox. If I set the XIM to common, the XIM is doing it. Kind of like audio. You can record and process audio at 24bit/96k all you want, but eventually it will need to be output at 16bit/44.1 for CD.
Hey, if you wish to sync your inputs to the framerate of your monitor then yes, you can use sync common. Most Ximmers use sync default though as this gets them closer to the amount of packets that the console expects to receive. To perfectly match what the console is asking for you can go sync off and 250hz on the XIM. Then your XIM runs on the same polling rate and inputs per second as the console controller.
I've been using my Apex on PC and it's worked rather well so far even though it's only made for console. Would you recommend I use Sync OFF and 1000Hz for PC considering PC can utilise the full 1000Hz?
If the PC game was made for inputs being accepted at such a high rate then yes, you can absolutly go for it. If your mouse movements turn out to be stuttery or skip then reduce the polling rate or add some smoothing.
Lovely video, I’m on 250Hz Sync OFF using the MJFAME config, i was struggling a bit in the beginning bcs I switched from 1000Hz too 250Hz and I lowered my sensitivity for more aim assist and this works perfect for me i feel that the aim assist is more stronger.
Hello, I am on the lookout for your videos, I have my Halo 5 with 250Hz and synchronization off to what you said in your previous video, do you think that configuration is fine or should I modify the polling cup, I await your answer friend.
@@XIMCentral Thanks for answering, if it feels good friend, I'll stick with that configuration. excellent videos thanks to your previous video improve the shots a lot
There honestly is no right or wrong as there are so many things to consider, delay, aim assist, mouse movement quality, ... there isnt one best settings but your settings sound really really good ;).
I would suggest to use a higher polling rate with sync default, common or slow as a minor desync can then otherwise result in your packets being send on the next cycle. When playing sync default 125hz that would mean your packages can get delayed by 8 milliseconds while with 1000hz it would only be 1 millisecond.
I use xim on PC playing fortnite at 240fps - what sync and mouse polling rate do you recommend? If I understand you properly I should be using off sync and 250hz polling ? What mouse dpi?
Yes thats what i would recommend. DPI is independent from this and will more or less influence how much aim assist you will have. Higher values result in less aim assist and lower values in more aim assist. You shouldnt go lower than around 1600 dpi though.
so the sweet spot is 250Hz for consoles, but what about PC? i use xim apex on PC as controller input. lets say i play call of duty, does PC version also made as console version of the game so best result is with 250Hz? or PC version will be best with 1000Hz. i have 70-90 fps in the game on 144hz monitor
Hey, thats something im actually not sure about. I would say try 125hz, 250hz and 500hz to see which one gives the best result on PC. It might even differ from game to game.
Hey man great video,I'm playing destiny 2 on series at 120 Hz what polling rate and settings would you recommend for more responsiveness and aim assist,thanks
@@XIMCentral thanks man,I've tried out the AJ frame confiq with the 250 Hz trick it's very good but I would like it a bit quicker does the dpi have to be 800 for it to be the most effective are could I put it up abit
Hey, i recently made a new PUBG video and i would recommend the synchronization used in that tutorial. I dont memorize the value anymore though, but after lots of testings that one worked out the best. Its explained in the video.
Thanks for the video. But can you still clear up which is the better and more preferable Sync choice for Rainbow Six PS4. Since we get just 60 FPS and what will be the better option for PS5 Siege as it gets around 120 FPS?
Finally this is explained. Now can work on settings with more understanding of what you are actually doing, instead of trial and error method. So are you saying that if we set Sync Default (Example) - no point to have XIM refresh rate in global settings above 125Hz?
I would still recommend to stay with 500/1000hz for sync default, common or slow. Imagine a very short desync between the console and XIM, this would cause your input package to not be accepted by the console at the current but at the next possible time which with 125hz is 8 milliseconds later. With higher polling rates this wont matter since the next package is accepted much sooner.
Hey, that depends on if you want more aim assist or a closer PC mouse experience. Based on that pick a sync that suits this the most. The majority of Ximmers will prefer something in between which can be achieved by 1000hz/500hz and sync default for example.
@@XIMCentral i'm from PS4 pro, and i prefer a closer PC mouse experience and minimum input lag possible, now i use a MJFame config with 250hz It Is not bad
@@SuperError18 Hey, in that case i would recommend you to not use MJFame as that an aim assist booster config which trades mouse accuracy in favour of more aim assist (so less PC like). For a close PC experience i would recommend my Warzone config video with its settings plus the best parachute trick video to handle the parachute gliding.
What response rate with OFF sync would be best for Xbox one S for apex legends? I thought it ran at 60fps; and in your recent video you use 250hz. Sorry I’m confused 😕
hello im back again :) for ps5 overwatch at 60 fps on off sync, 250 hz is better if I understand right? or 125 hz? also should I match polling rates on both devices? (g pro wireless)
Hey, as long as the mouse polls the same or faster than the XIM you are fine. As for the other question, you have to test those settings for a few games to find out which one is the best. They will primarily influence the aim assist and thats a personal preference thing, so its therefore not really possible to say which one (objectively) is the best.
Hello! I have a question about sync off, for having sync off do I need to put 250hz on just xim app or my mouse also? For example if I put 250hz with sync off on the app can I have my mouse on 1000hz or does it need to be 250hz as well?
@@soloitaliano1247 It will make no difference, your XIM will just accumulate the packets of a higher polling rate and bundle them to the one the XIM uses.
My experience is the next, i was playing 250hz off sync on warzone with 60 fps and works very very good, but when i changed to 120 fps, cause last week with the warzone update they add the option to 120 fps so i change id, so i played with 250hz sync off on 120 fps but i feel like doesnt work right, like before so i changed back to 60 fps… but few days ago i tried again 120 fps but i changed 250hz to 1000hz sync always off, and yes works miles better than 250 hz… lot better but repeat when you play on 120 fps! I will be waitting for your recommendations on your test it on your new 120 fps monitor, but until that i will still playing on 1000hz and 120 fps.
Hey, this sounds like you prefer very responsive mouse movements. Going sync off 250hz on 60fps games is somewhat similar to sync off 1000hz for 120fps games. In both cases you use a sync/refresh rate higher than the framerate of the game which usually result in very responsive and PC like mouse movements. One of my next projects will be a "best xim settings for 120fps games" video, I already got the monitor but i need to do some testings to find out what works best first! :)
@@XIMCentral yes, i am a wrist player, maybe for this reason, i dont know. But really idk, the best time playing with the xim apex was on the same settings and in 1000hz and off sync on 60fps, but idk what happened since few months ago cause doesnt work so well anymore And something change, dont know why but before the apex works literally strong very good response, aim, shoot, like aimbot 😂😂 …. Ok i will be waiting for your next video!! Keep doing, great job! You are top!
@@nanexxvii It could have been that the game received an aiming mechanic update. In that regard go into the global settings of your XIM Manager and press force library download. After that create a brand new config with the very same settings and check if that plays as well as previously :).
@@XIMCentral maybe you are right, because i force downloading but, but, i dont create a new setting i mean i create a new one but i paste the code settings of the before config, and maybe is that, maybe if i create a new config manually without the copy and paste it will work great… tomorrow i will delete all and reset to factory and make a new config manually maybe is that! Thks for the idea man youre awesome. And a last questio , idk why every time than they updste the game i have to change the xim sensibility i have to reduce it because he move so fast, i notice that from 4,5 months ago and idk why, like i said any update the sensibility is higher and i dont touch anithyng … idk it is weird, what could be the reason? Maybe the same, maybe is my config that need to do as you said. And sorry for my bad english..😓 thanks for all
@@nanexxvii Hey, the sensitivity changes are due to the game developers changing the ingame aim mechanic. The XIM has no influence over such a change and can only follow those changes by updating the ST/config translator via an ingame donwload (and then new config creation).
Hey, i should have covered that in my "Competitive Apex Legends Config" video. I dont recall the answer right now so id say look it up in that video if necessary! :)
Danke erstmal fur dein geiles Video u d die Erklärung. Ich spiele zurzeit auf der Series X auf einem 2K Monitor 27Zoll auf nativ 120FPS. Ich habe dein letztes Setup ausprobiert und das geht sogar besser als das MJ Konfig fur aim assist! Das Ding ist das du natürlich nicht alle setups darstellen und ausprobieren kannst für uns, leider. Aber wenn man dein Kanal studiert hat dann kann man schon sehr viel einstellen auf der XIM Apex. Danke dir nochmal fur deine tolle Arbeit ! Ach ja DPI spielt auch ne große Rolle beim AA und natürlich die anderen Einstellungen wie Boost usw.
Hallo, sollte ich doch lieber auf Standard stellen wenn ich auf 120 FPS Monitor spiele und dann die Maus auf 125hz? Oder soll ich bei OFF lassen und 250Hz stellen!? Das wäre jetzt schön zu wissen mein Freund 😊
Hey, wenn du Default benutzt dann am besten mit 500/1000hz da es bei einem desync sonst zu zusätzlichen 8 Millisekunden Verzögerung kommt wenn du 125hz benutzt.
What if i used sync .. slow u said its good for 30fps games.. If i used it with 1000 response .. on 120fps game (im on pc 120fps avg).. In short what is the best settings for game runs at 120 fps ? Sync ? Response ? About mouse speed no worry's will fix that
Yes its ideal for 30fps games and will also basically boost the aim assist in games with more fps. The best settings highly depend on what you want to achieve, more aim assist, better mouse movements, ... A good middle ground setting which is decent in all of these areas is sync default 500/1000hz or sync off 250hz.
@@joshuagarcia2642 I heard the aim mechanic has changed in OW with the addition of the Crossplay feature, do you notice any differences in regard to your aim?
@@joshuagarcia2642 All right then please request a retrain of the OW ST Config here, the responsible person will then check if the aiming mechanic has changed. This is currently the only way to track this community.xim.tech/index.php?board=80.0 In my opinion sync off feels better in OW but if there really is a change in the aiming mechanic then you will have to wait for the new ST to solve this.
I’m only just realizing Titan 2 has polling rates you can change. Should that be changed to match the polling rate I’m using on the xim? Currently really liking the sync off with 250hz
Yes absolutly, your Titan should match your XIM polling rate. Otherwise the Titan will force the console into 1000hz mode while the XIM wants to communicate with 250hz.
u previous video u did say we can get more aim assist at 250 polling hate and syn off. but if i play at 60fps, i should put syn common? and 120 i should put in default?
If you want to sync your inputs to the framerate then use sync common for 60fps. If you want more aim assist use the 250hz sync off trick. Both are different approaches and it depends on what your intention is or how you want your mouse movements to feel. Pick the one that feels the best to you! :)
Finde deine normale Stimme angenehmer 😎 Wobei, wenn du die bearbeitete Stimme beibehälst, würd ich die 5 - 10 % langsamer machen. Klingt, als ob du das schnell runterleiern willst. Vllt liegt's auch nur am Englischen 😅😂 Bekommst du eig. regelmäßig auch Nachrichten, weil du mnk benutzt oder hast du das ausgestellt?
Haha danke, ja ich glaub die hab ich echt zu schnell eingestellt. Nachrichten habe ich auf "nur Freunde" da das irgendwann einfach nur noch langweilt^^.
@@thekillprograme813 Haha viele sind schon unterhaltsam aber ab und zu gehts halt echt unter die Gürtellinie^^. Und da ich das Zeug ohnehin schon über RUclips Kommentare bekomme hab ichs zumindest auf der Konsole abgestellt xD.
@@thekillprograme813 Gelöscht werden nur Beleidigungen und die meistens von RUclips selbst, da muss ich selber i.d.R. nichts machen. Von dir habe ich jedenfalls keinen Kommentar gelöscht :(. Was war denn die Frage?
So if i play a game on the xbox series X at 60 Fps and i use the xim that is then plugged into another device capable of running at any polling rate the xim can run at and has the ability to select an input polling rate and output polling rate. What should these be set at to make them run effectively? Should my polling rates match on both devices?
@@XIMCentral would it make more sense to have mouse and Key/ xim to 1000hz then the input of the second device to 1000hz but output to 250hz? That way it is getting the information to the second device as fast as possible but only sending information to the xbox at its acceptable polling rate?
Hey, as long as the mouse polls at the same frequency or faster then the XIM you are fine. For BO4 i think default worked out the best, but for the actual values i would recommend to watch my dedicated BO4 config video.
Typically play seige. So no aim assist. So should my sync be on default because I'm running 120fps.for better reactivity? Have to up the sens. But I use common.
@@dzrekmode7980 I will probably make a video on that sometime next week. In general thats a good sign as the lower the XIM Sensitivity the better the mouse movements.
I have a problem bro plz help me when I crouch spam on rainbow six siege with space it crouches when I don’t shoot but when I try shooting and crouch spamming with space at the same time it doesn’t crouch for me what could be the issue? I tried other keys still same result
Hey, this sounds like a binding issue in the sub config that is active when you shoot. Check your sub configs, im sure theres something wrong with the button bindings :).
@@XIMCentral oh wow I just found out my space was a different key for the other sub configd Thanks so much bro ur the best that’s why I been losing so many gunfights lol thank u so much ur the best man
125hz will have more aim assist than 250hz so id say it depends on if that is your target or not. Both will play fine so you have to decide if you prefer slightly more responsive mouse movements or more aim assist :).
@@XIMCentral oh and another quick question... For example: with 250hz and sync off I have 100.00 sens on a random game, with 125hz and sync off should I lower this sensitivity to 50 for same sensitivity, right?
@@XIMCentral with what polling rate? Since i use a ps4 pad conneted the game should recieve 125 hz input?and what dpi for have good AA and nice precision
@@alkatraz9171 Lower polling rates will provide more AA whereas higher ones have less AA but more responsive mouse movements. There is not one best polling rate since everyone has a different preference for how responsive the aiming inputs should be or how much AA there should be.
@xim central I bought a Xim apex and I have been using the Xim 4 for a long time. I have curves I use on my XIM4 how would I change the coding of the curve to work for the Xim apex.
Moin, mal eine Frage, wenn man nicht die neueste Firmware auf dem xim apex installiert hat dann funktioniert das in game auch nicht, richtig? Also bräuchte ich für die normale ps4 die 2020er firmware korrekt?
I dont speak english but if i play rainbow six siege at 120 FPS i need 1000hz poling rate or 125hz ? The game have no aim assit so which one i need to choose ?
Hallo hab jetzt eine ps5 und ich weiß ich bräuchte ein speziellen Controller für mnk und ich wollte fragen ob es sich lohnt noch so ein zukaufen oder schon eine Lösung habt und sie bald rausbringt das ich mit den ps5 Controller das auch machen kann
Hey, bevor die ersten offiziellen lizensierten PS5 third party Controller auf den Markt kommen wird es wohl keine DualSense Lösung geben. Und da bisher kein einziger Hersteller so einen Controller angekündigt hat wird es wohl noch mehrere Monate dauern. Zudem wird die Speciality Controller Lösung ja auch weiterhin möglich sein selbst wenn der DualSense Controller irgendwann kompatibel ist.
Hey, that depends on how much aim assist you want. If you want an aim assist oriented setup then go with the sync from my most recent OW config video, if you want a PC feeling then with the sync from the OW config video before that.
@@XIMCentral cause i watch the secret video u said the game with less 62hz need to play with common so i thought i should switch and u said that 1000hz its not usefull but in ow guid you recommend 1000hz so am confused can u explain
@@smurfonly5225 Hey, i did two OW config videos (my two most recent ones). Both configs are still valid. One aims towards the closest PC feeling, the other to maximixe aim assist while maintaining muscle memory. Neither of the two has the aim to only boost aim assist. This is not desireable in OW as you can fine tune the aim assist via the ingame settings anyway. So these secret aim assist settings are more valiable in games with (close to) no ingame aim assist customization. Since OW offers you to completely adjust the aim assist though the main aim assist boost comes from the ingame settings itself.
Hey, both the new and old Xbox runs on 250hz natively so default should perform best on both consoles unless you go snyc off 250hz. That is of course if you want to match your inputs to the processing loop of the game.
Both settings have advantages and disadvantages in terms of aim assist and mouse movements, i would recommend you to try both and then stick to the one that feels best.
If you go from Common to OFF (250 Hz) then multiply Sensitivity by 4. The other video called *XIM Apex - Secret Aim Assist Settings From Alpha Testers* mentions this conversion at offset 2 minutes, 53 seconds.
The Cronus Zen has a 10 millisecond cycle at max from what i know so you should set your XIM to 125hz. For a perfect sync i would recommend to use a Titan Two.
@@XIMCentral hey my controller will not show up on the app even tho it’s connected the mouse and keyboard do but the controller does not ? Do you have a fix ?
@@cpratt2544 Hey, it might be a slim/one x controller or one of the new series x/s controllers. Either way update your XIM Firmware to the latest beta firmware, if that doesnt solve it then it could be the cable between the XIM and the controller.
What’s tie best sync in ur opinion for apex legends Apex legends is #1 battle royale game can u do some toturials and tips plz Member since 2017 ❤️❤️❤️
@@RandyMoss84vikes Yes exactly, and when you go from 1000hz to 250hz your sensitivity will be 4 times faster hence just set the XIM sensitivity for MJFame from 500 to 125hz :).
Hey, that depends on the mouse and game. Usually its best to try common, default and off in your favourite game and stick to the one that feels the most comfortable and accurate.
Tbh it all comes down to what you prefer. Some people prefer the smoother mouse movements with common, other like it more stuttery with default or even off. Most Ximmers will prefer either common or default, but id highly recommend you to try 250hz and sync off as well as thats a setting most people never tried but has great potential.
I think the game normally runs at 80fps on the console but with the recent release got capped to 59. At least thats what i heard, im not sure if its true.
Can you PLEASE talk about the proper polling rate and synchronization for rainbow six siege for ps4. They recently changed the frames and locked ps4 players back on 60 frames. I have been playing on default and 1000hz on ps4. My aim has felt off since this new season. Because of this change on ps4, should i be using 500 hz?
Hey, the responsible person at XIM is already creating a new ST for RB6 that takes these changes into account. Once its out you can use the same config values again that you have used in the previous season.
I'm running into this issue with xim when I try to update it on pc. Says "Unable to find xim apex" "Please be sure your xim apex is connected to your pc without any devices attached to it and it is displaying a solid blue light" Which, it is displaying a solid blue light but still unable to connect?
Never mind, I got it working. Never the less if anyone else is having this issue. Try to restart your pc after downloading the update software. It worked for me, & hopefully it works for you too
Thanks, I have a question about ads sensitivity on my xim apex. I was having a lot of disconnect and I had a message about an out of date st recreation. I forced game download and deleted the st that was giving me trouble. The new st I created has a 1:1 ads sensitivity and does not respond to any number I put. Can you help?
@@CaptObv1 Hey, im not exactly sure what you mean but when an ST is outdated (triangle error symbol in the bottom left) then you have to do a force library download via the global settings and create a new game config for that game. Let me know if that solved the issue.
@@XIMCentral thanks for the reply. Yes I’ve done all that you mentioned. The ads is not slower like I have always set it. It’s fast like my hip sens. I can’t get it to function like it used to
I have a question when I do a mathematical process with cheating I get a result of more than 600 ADS i use poling rat 1000 hz , my ADS(85.5×8=684) my sync in default plz need help
Hey, in that case you cannot achieve the sensitivity because it only goes until 500. Instead double your mouse DPI so you can set your ADS to 342 instead to have the same turnspeed.
If you do that anti recoil thing to us That will be super cool.. If u can make it without any mouse shifting.. What if i used xim and cronus zen will i get that no recoil ? Also is cronus zen shifts down when using no recoil ,? Sorry for those questions but im really Trying to get answers thanks
Hey, Cronus + XIM has a bad compatibility, get a Titan Two instead. Yes recoil scripts also have downsides similar to the trick that i showed in my automated recoil video.
@@XIMCentral @Xim central And please is there any way to increase sub config , i’m play apex and already have grenade , healing , inventory , recoil , and i need one more to loot the boxes with my mouse
@@darknessknight0 Hey, if you would like to see more sub configs then please share your request on the following board as new feature requests are gathered over there :) community.xim.tech/index.php?board=6.0
Does mouse polling matter much when testing this? I understand it should be equal to or higher than the XIM, but would leaving it on 1000 be a problem?
Do you have a Xim aux that a could possibly control the new ash recoil 🤣🤣? Because every time I do the auto recoil aux where everytime you shoot it’s supposed to pull down it doesn’t work for me idk why I was wondering if you could just copy and paste maybe a default one and I could adjust the % so it works please ?
@@XIMCentral I was wondering could you paste a Xim auxiliaries setting so I could try higher values because it doesn’t work for me at all when I set auxiliaries it doesn’t kick down automatically it only does it when I move my mouse it’s weird so I was wondering if you have just one you’ve used so I can just use and set my settings onit and use a higher value please?
@@Vu1gr Hey, this just means your currentl value isnt high enough yet. Some games require higher values before you even see some movement. The clips from this video have been done with the old aiming mechanic, Ubisoft changed it a while ago so the values from this video will have to be higher for RB6 now.
Hey, im not entirely sure what you mean with at the same time. When you are in the HIP mode you should be able to sprint/knife, while in the ADS mode you can lean left and right. You cannot lean in the HIP mode in console RB6, that is only possible in the PC version. Is that what you meant?
@@XIMCentral i was thinking about the warzone competitive settings :) Edit: nvm saw the comment on other video ;),btw looking into the new xim device ;)
Hey, you have to change the percentage until it matches your weapon recoil. You can further tweak it by using different barrel attachments or weapon grips.
I am forced to play at 250hz on beloader, before I was playing at 1000 and in (default). i having on hip (110) ads (110) what calculation should i do to get back to 1000hz?
Hey, unless you are not using sync off then your sensitivity will be the same when you switch your polling rate. You can also stay on 1000hz though and ignore the purple lights. The Beloader will then accumulate your packets and send them as a 250hz signal to the console.
@@XIMCentral I started playing again recently but I remember that when I had the xim without beloader the sensitivity seemed to me faster at 1000 hz .. I can't understand .. so you are telling me that if I play with a 1000hz polling rate on beloader it is like if i was playing with 250hz on the xim anyway? so i just have to get used to this situation and get used to 250hz? .. because some say that beloader based on how it is configured also allows you to play at 1000hz .. enlighten me please
@@claudiovolaj4640 If you dont use sync off then your sensitivity is the same. Maybe the game has released an aim mechanic change and thus the sensitivity feels different. Beloader is locked at 250hz at the moment. With a PS4 v2 controller you can usually keep your XIM at 1000hz though without getting purple lights. But that wont change the Beloader and its 250hz.
@@XIMCentral I'll ask you two more questions then I'll stop. Why when I put 250hz and then I put 1000hz even if the beloader doesn't send more than 250hz the sensation of aiming is more fluid? Then since I haven't played for 6 months and am due from beloader, from your personal view how much does it change from 250hz to 1000hz as mouse sensation ?, not so give me the answer why not a chance to test it. thank you very much for your availability
@@claudiovolaj4640 Hey, it could come to a desync and as a result the delay could be doubled. So you get effectively downgraded to 125hz. Thats just a theory though for why you might experience that. Personally i keep my XIM at 1000hz when playing with the Beloader. I use a PS4 v2 controller and dont get any purple lights with it.
When I use 250hz on the XIM & synchronization off, I get way too much aim Assist and is hard to land my shots onto the opponent. Is there a way for me to try to break the AA? I also tried 250hz on mouse and 1k hz as well. I don’t what hz to run neither for a g502 hero
@@andrewtorres7604 Mouse polling doesn't matter much as long as it's equal to or higher than your XIM polling. So if you're using 250hz on the XIM then anywhere between 250-1000hz on your mouse will produce the same result since the input is capped at whatever the XIM is set to. My HIP and ADS values are basically irrelevant as the values and ratios will change from game to game as the translators are different. For Black Ops 4 as an example though as that's currently my main game, I use 4.5 on HIP and 2.8 on ADS. Plain curve on HIP and RML anti aim assist curve #6 on ADS.
Is there a way to make a sub config reactive right away after deactivation without another button press? I’m trying to make something easier and I can’t figure it out
@@XIMCentral Since you're far more experienced with xim could you help me make crouch strafing effective and easy in apex legends? I've spent a lot of time and everything I can do is clunky or messes other things up
@@XIMCentral While strafing left and right you hold crouch long enough that it lowers your model and you repeat it over and over while strafing. When you do it right your character looks like they bob up and down while moving making it harder to be hit
Hey, i think the Azeron has to be put into a specifc mode to work with the XIM, the Azeron homepage should have instructions on what to do when using it with a XIM.
Hey, for that check out my dedicated WW2 config video. Im no longer sure what the best one for that game is but it should be explained in the video :).
hey! Today we got a new download option in global settings for rainbow Six Siege, it's called rainbow Six Siege UPDATED, there is no longer an option to recreate Classic configurations, my sensitivity therefore feels completely different, any help?
@@XIMCentral its telling us to use a standard 100 100 10 10, but with the standard 75 ads, but the hip and ads sensitivity itself feels sooo much faster
@@serenitymint ST = Smart Translator, the tech iniside your XIM config that realizes the mouse movement. When a new aim mechanic update is added by the game developer a new ST is required that is optimized for that mechanic (to realize the best mouse movements).
Link Channel Membership Subscription:
ruclips.net/channel/UCJQZlZVwbWQNvgCXK3gCPrAjoin
Link Secret Aim Assist Video:
ruclips.net/video/DPrZOMwoOwo/видео.html
hello Xim I play on Xbox series x tv 60 Hz (what Hz cup do I have to put in the Xim app and what Hz trace on my bloody A4 tech mouse that has memory ?? and the synchronization help me please
@@ximmatrixproplayers For the best polling rate (Hz) follow my "Best XIM Polling Rate" video. It heavily depends on your mouse and not the XIM. The video will show you how to measure the best polling rate for your setup. The synchronization is then up to you and it mainly depends on if you want more aim assist or a closer PC experience.
@@XIMCentral if I saw the complete video now I understand more the synchronization but my mouse and. The Xim app does not know what Hz to place, my mouse uses 3200 dpi and allows a Hz of 1000, 500 250 etc. I do not know if to place it at the same time hz you help me I do not know what it responds to use and if to put it it responds to the mouse rate and. xim
@@ximmatrixproplayers Hey, for that do a polling rate benchmark with your mouse to find out which polling rate is the best for your mouse and the XIM :).
So from what I understand on rainbow six siege it’s running on 60 fps so I would want to run synchronization on common but what would I set my polling rate to?
The artificial voice is 100% good 👍🏻
بسام اذا فهمت عليه ارسلي رقمك واتس اب بضيفك تفهمني
Hello od1n
Which synchronisation mode offers the best accuracy with a mouse???
Does polling rate effect my mouse accuracy??
And what factors|settings can offer me the best mouse accuracy??
Ps5 120hz destiny 2
Hey, the best overall accuracy is probably provided by sync default. Yes the polling rate can affect your accuracy, in a negative way. If your mouse cannot consistently poll at the rate your XIM is set to then this can cause mouse stutter, which reduces your acciracy. The best mouse accuracy can be achieved by using the correct sensitivity, thats the most important aspect. A large share of players use sensitivities that dont match their dexterity level. Thats the main difference between PC Pros and normal gamers, the pros are using sensitivities that perfectly match their dexterity. My "ultimate mouse sensitivity" video shows a method on how to find your own most optimal sensitivity if you are interested in that.
Super Video 👌✌️…das Beispiel zum Video finde ich super gewählt…
I love these quick informative videos, thank you!
So if I understand correctly, I would get the best aim assist quality/response by setting the xim polling rate to 125hz, and off sync for my hip/ads if I'm playing a game (cod/bf) that runs at 120fps? I've since switched to 250hz and off sync based on the info in the last video and it feels great, so if I understood right I'm excited to give this setup a try!
I did the same and it works perfect with 120FPS on the ps5 in warzone.
@@mathialba sweet thanks for the input, can't wait to try it out!
Yes exactly! If it feels too sluggish though then try 250hz instead as it makes the mouse movements noticeably more responsive :).
@@XIMCentral awesome, thanks for the response! It's always fun learning something new with the xim.
@@conner490 you gonna try sync off at 125?
So am I correct in understanding….if I’m using an XBoxOne for R6, I should be using “common” sync instead of “default?” I believe the frame rate is 60fps for this game.
I currently have my Corsair (3200dpi) mouse and Apex device set to 500Hz polling. I created a new config today after doing a full Apex games download. I’m using a standard 780p 60 Hz TV as my monitor. The setting feels fairly smooth. I’m pretty sure I got all these settings from a recent video of yours. After following the instructions in the mouse sensitivity video, I landed on a HIP sensitivity of 34. That seems about right.
I think the concept here is….Siege on XBoxOne will run at 60fps, one way or another. At some point in the chain, the data input will need to be whittled down to this. It sounds like if I leave the XIM on default, I’m leaving this scaling down to the XBox. If I set the XIM to common, the XIM is doing it.
Kind of like audio. You can record and process audio at 24bit/96k all you want, but eventually it will need to be output at 16bit/44.1 for CD.
Hey, if you wish to sync your inputs to the framerate of your monitor then yes, you can use sync common. Most Ximmers use sync default though as this gets them closer to the amount of packets that the console expects to receive. To perfectly match what the console is asking for you can go sync off and 250hz on the XIM. Then your XIM runs on the same polling rate and inputs per second as the console controller.
@@XIMCentral would I then drop my mouse to 250Hz as well?
@@ericruddphotography You can do that but its not necessary. As long as your mouse polls on the same frequency or a higher one you are fine.
@@XIMCentral thank you.
I've been using my Apex on PC and it's worked rather well so far even though it's only made for console. Would you recommend I use Sync OFF and 1000Hz for PC considering PC can utilise the full 1000Hz?
If the PC game was made for inputs being accepted at such a high rate then yes, you can absolutly go for it. If your mouse movements turn out to be stuttery or skip then reduce the polling rate or add some smoothing.
Lovely video, I’m on 250Hz Sync OFF using the MJFAME config, i was struggling a bit in the beginning bcs I switched from 1000Hz too 250Hz and I lowered my sensitivity for more aim assist and this works perfect for me i feel that the aim assist is more stronger.
What game you playing
Warzone
You kept your mouse at 1000 hz or you also lower it to 250?
@@rafalonso13 yes i keep it at 1000hz, you don’t have to lower it.
Hello, I am on the lookout for your videos, I have my Halo 5 with 250Hz and synchronization off to what you said in your previous video, do you think that configuration is fine or should I modify the polling cup, I await your answer friend.
Hey, those settings are a great pick for Halo 5, no need to change anything if you enjoy the gaming experience with those! :)
@@XIMCentral Thanks for answering, if it feels good friend, I'll stick with that configuration. excellent videos thanks to your previous video improve the shots a lot
Nice vidéo as always my guy 👍, i play bf4/PS4 most of the time. Sync default, 500hz. What do you say, wrong or right ?
There honestly is no right or wrong as there are so many things to consider, delay, aim assist, mouse movement quality, ... there isnt one best settings but your settings sound really really good ;).
@@XIMCentral allright nice to hear. Keep the good work and wish you all the best guys.
Does the polling rate have any affect on default sync? For example, would 1000hz + default and 125hz + default have the same feeling ?
I would suggest to use a higher polling rate with sync default, common or slow as a minor desync can then otherwise result in your packets being send on the next cycle. When playing sync default 125hz that would mean your packages can get delayed by 8 milliseconds while with 1000hz it would only be 1 millisecond.
@@XIMCentral Thanks for the advice and the reply! :)
I use xim on PC playing fortnite at 240fps - what sync and mouse polling rate do you recommend? If I understand you properly I should be using off sync and 250hz polling ? What mouse dpi?
Yes thats what i would recommend. DPI is independent from this and will more or less influence how much aim assist you will have. Higher values result in less aim assist and lower values in more aim assist. You shouldnt go lower than around 1600 dpi though.
so the sweet spot is 250Hz for consoles, but what about PC? i use xim apex on PC as controller input. lets say i play call of duty, does PC version also made as console version of the game so best result is with 250Hz? or PC version will be best with 1000Hz. i have 70-90 fps in the game on 144hz monitor
Hey, thats something im actually not sure about. I would say try 125hz, 250hz and 500hz to see which one gives the best result on PC. It might even differ from game to game.
@True what settings or curve you running?
Hey man great video,I'm playing destiny 2 on series at 120 Hz what polling rate and settings would you recommend for more responsiveness and aim assist,thanks
Id say try 250hz or 500hz off first, and then 500/1000hz default. One of the two should play best :).
@@XIMCentral thanks man,I've tried out the AJ frame confiq with the 250 Hz trick it's very good but I would like it a bit quicker does the dpi have to be 800 for it to be the most effective are could I put it up abit
@@jamesohagan2529 You can also increase the DPI value, thats fine! :)
Great video as always.Which synchronisation method would you recommend for PUBG on PS4?
Hey, i recently made a new PUBG video and i would recommend the synchronization used in that tutorial. I dont memorize the value anymore though, but after lots of testings that one worked out the best. Its explained in the video.
@@XIMCentral link to video please as I do not see PUBG in Playlist
@@Mr-Not-Applicable ruclips.net/video/jh2vd8Bd-3U/видео.html
Thanks for the video. But can you still clear up which is the better and more preferable Sync choice for Rainbow Six PS4. Since we get just 60 FPS and what will be the better option for PS5 Siege as it gets around 120 FPS?
Hey, the current ST for RB6 is outdated and a new one is currently being made, until then its quite difficult to say which sync performs the best.
Finally this is explained. Now can work on settings with more understanding of what you are actually doing, instead of trial and error method. So are you saying that if we set Sync Default (Example) - no point to have XIM refresh rate in global settings above 125Hz?
I would still recommend to stay with 500/1000hz for sync default, common or slow. Imagine a very short desync between the console and XIM, this would cause your input package to not be accepted by the console at the current but at the next possible time which with 125hz is 8 milliseconds later. With higher polling rates this wont matter since the next package is accepted much sooner.
Great video man! The best sync and hz for Warzone for you?
Hey, that depends on if you want more aim assist or a closer PC mouse experience. Based on that pick a sync that suits this the most. The majority of Ximmers will prefer something in between which can be achieved by 1000hz/500hz and sync default for example.
@@XIMCentral i'm from PS4 pro, and i prefer a closer PC mouse experience and minimum input lag possible, now i use a MJFame config with 250hz It Is not bad
@@SuperError18 Hey, in that case i would recommend you to not use MJFame as that an aim assist booster config which trades mouse accuracy in favour of more aim assist (so less PC like). For a close PC experience i would recommend my Warzone config video with its settings plus the best parachute trick video to handle the parachute gliding.
love the new voice! really clean
What response rate with OFF sync would be best for Xbox one S for apex legends? I thought it ran at 60fps; and in your recent video you use 250hz. Sorry I’m confused 😕
Yes that would be a very good choice for both, maintaining responsive mouse movements while also keeping a lot of aim assist!
hello im back again :) for ps5 overwatch at 60 fps on off sync, 250 hz is better if I understand right? or 125 hz? also should I match polling rates on both devices? (g pro wireless)
Hey, as long as the mouse polls the same or faster than the XIM you are fine. As for the other question, you have to test those settings for a few games to find out which one is the best. They will primarily influence the aim assist and thats a personal preference thing, so its therefore not really possible to say which one (objectively) is the best.
Great guide bro 🙌🏽 do you know whether or not a chivalry 2 config is in the works?
Yes its on the to-do list :) community.xim.tech/index.php?topic=30363.0
Bro was würdest du sagen ist am besten für rainbow 6 siege von den Profilen ?
Gruss aus Köln
Sync Default und Gängig spielen sich imo am besten :).
Hello! I have a question about sync off, for having sync off do I need to put 250hz on just xim app or my mouse also? For example if I put 250hz with sync off on the app can I have my mouse on 1000hz or does it need to be 250hz as well?
Hey, its sufficient to only change your XIM polling rate for as long as your mouse runs on the same, or a higher polling rate.
@@XIMCentral thanks for responding! Would it even make a difference with a higher polling rate on mouse with sync off and 250hz on xim app?
@@soloitaliano1247 It will make no difference, your XIM will just accumulate the packets of a higher polling rate and bundle them to the one the XIM uses.
@@XIMCentral great thank you🤙🏼
My experience is the next, i was playing 250hz off sync on warzone with 60 fps and works very very good, but when i changed to 120 fps, cause last week with the warzone update they add the option to 120 fps so i change id, so i played with 250hz sync off on 120 fps but i feel like doesnt work right, like before so i changed back to 60 fps… but few days ago i tried again 120 fps but i changed 250hz to 1000hz sync always off, and yes works miles better than 250 hz… lot better but repeat when you play on 120 fps!
I will be waitting for your recommendations on your test it on your new 120 fps monitor, but until that i will still playing on 1000hz and 120 fps.
Hey, this sounds like you prefer very responsive mouse movements. Going sync off 250hz on 60fps games is somewhat similar to sync off 1000hz for 120fps games. In both cases you use a sync/refresh rate higher than the framerate of the game which usually result in very responsive and PC like mouse movements. One of my next projects will be a "best xim settings for 120fps games" video, I already got the monitor but i need to do some testings to find out what works best first! :)
@@XIMCentral yes, i am a wrist player, maybe for this reason, i dont know. But really idk, the best time playing with the xim apex was on the same settings and in 1000hz and off sync on 60fps, but idk what happened since few months ago cause doesnt work so well anymore And something change, dont know why but before the apex works literally strong very good response, aim, shoot, like aimbot 😂😂 …. Ok i will be waiting for your next video!! Keep doing, great job! You are top!
@@nanexxvii It could have been that the game received an aiming mechanic update. In that regard go into the global settings of your XIM Manager and press force library download. After that create a brand new config with the very same settings and check if that plays as well as previously :).
@@XIMCentral maybe you are right, because i force downloading but, but, i dont create a new setting i mean i create a new one but i paste the code settings of the before config, and maybe is that, maybe if i create a new config manually without the copy and paste it will work great… tomorrow i will delete all and reset to factory and make a new config manually maybe is that! Thks for the idea man youre awesome. And a last questio , idk why every time than they updste the game i have to change the xim sensibility i have to reduce it because he move so fast, i notice that from 4,5 months ago and idk why, like i said any update the sensibility is higher and i dont touch anithyng … idk it is weird, what could be the reason? Maybe the same, maybe is my config that need to do as you said. And sorry for my bad english..😓 thanks for all
@@nanexxvii Hey, the sensitivity changes are due to the game developers changing the ingame aim mechanic. The XIM has no influence over such a change and can only follow those changes by updating the ST/config translator via an ingame donwload (and then new config creation).
Nice Video🔥 Thank You XIM❤️
What sync and xim hz is better for ps4 apex legends ?
Hey, i should have covered that in my "Competitive Apex Legends Config" video. I dont recall the answer right now so id say look it up in that video if necessary! :)
Danke erstmal fur dein geiles Video u d die Erklärung. Ich spiele zurzeit auf der Series X auf einem 2K Monitor 27Zoll auf nativ 120FPS. Ich habe dein letztes Setup ausprobiert und das geht sogar besser als das MJ Konfig fur aim assist! Das Ding ist das du natürlich nicht alle setups darstellen und ausprobieren kannst für uns, leider. Aber wenn man dein Kanal studiert hat dann kann man schon sehr viel einstellen auf der XIM Apex. Danke dir nochmal fur deine tolle Arbeit ! Ach ja DPI spielt auch ne große Rolle beim AA und natürlich die anderen Einstellungen wie Boost usw.
thank you!
Hallo, sollte ich doch lieber auf Standard stellen wenn ich auf 120 FPS Monitor spiele und dann die Maus auf 125hz? Oder soll ich bei OFF lassen und 250Hz stellen!? Das wäre jetzt schön zu wissen mein Freund 😊
Hey, wenn du Default benutzt dann am besten mit 500/1000hz da es bei einem desync sonst zu zusätzlichen 8 Millisekunden Verzögerung kommt wenn du 125hz benutzt.
Any recommendation for Destiny 2 on PS5? I am using 250HZ with SYNC OFF at the moment
and 25K DPI on my mouse :-)
Those are really good settings for D2 tbh! :)
just curious what are beam1mpact's rainbow 6 xim app settings and in-game settings?
Hey, he is using 1:1 the ones from the "Competitive RB6 Config" video that i uploaded not so long ago :).
What if i used sync .. slow u said its good for 30fps games..
If i used it with 1000 response .. on 120fps game (im on pc 120fps avg)..
In short what is the best settings for game runs at 120 fps ?
Sync ?
Response ?
About mouse speed no worry's will fix that
Yes its ideal for 30fps games and will also basically boost the aim assist in games with more fps. The best settings highly depend on what you want to achieve, more aim assist, better mouse movements, ... A good middle ground setting which is decent in all of these areas is sync default 500/1000hz or sync off 250hz.
@@XIMCentral thanks man ❤️
Whats better, Off sync or Default sync for new xbox aim changes with the new cross play update?
Which crossplay game are you refering to?
Sorry for Overwatch
@@joshuagarcia2642 I heard the aim mechanic has changed in OW with the addition of the Crossplay feature, do you notice any differences in regard to your aim?
@@XIMCentral my aim was worse in general, and I still havent pinpointed what it is.
@@joshuagarcia2642 All right then please request a retrain of the OW ST Config here, the responsible person will then check if the aiming mechanic has changed. This is currently the only way to track this community.xim.tech/index.php?board=80.0
In my opinion sync off feels better in OW but if there really is a change in the aiming mechanic then you will have to wait for the new ST to solve this.
I’m only just realizing Titan 2 has polling rates you can change. Should that be changed to match the polling rate I’m using on the xim? Currently really liking the sync off with 250hz
Yes absolutly, your Titan should match your XIM polling rate. Otherwise the Titan will force the console into 1000hz mode while the XIM wants to communicate with 250hz.
u previous video u did say we can get more aim assist at 250 polling hate and syn off.
but if i play at 60fps, i should put syn common? and 120 i should put in default?
If you want to sync your inputs to the framerate then use sync common for 60fps. If you want more aim assist use the 250hz sync off trick. Both are different approaches and it depends on what your intention is or how you want your mouse movements to feel. Pick the one that feels the best to you! :)
thankss
Finde deine normale Stimme angenehmer 😎
Wobei, wenn du die bearbeitete Stimme beibehälst, würd ich die 5 - 10 % langsamer machen. Klingt, als ob du das schnell runterleiern willst. Vllt liegt's auch nur am Englischen 😅😂
Bekommst du eig. regelmäßig auch Nachrichten, weil du mnk benutzt oder hast du das ausgestellt?
Haha danke, ja ich glaub die hab ich echt zu schnell eingestellt. Nachrichten habe ich auf "nur Freunde" da das irgendwann einfach nur noch langweilt^^.
@@XIMCentral alles klar 😎👍
Ach, okay. Ja, irgendwann ist's wohl auch nicht mehr lustig. Naja 😅😂
@@thekillprograme813 Haha viele sind schon unterhaltsam aber ab und zu gehts halt echt unter die Gürtellinie^^. Und da ich das Zeug ohnehin schon über RUclips Kommentare bekomme hab ichs zumindest auf der Konsole abgestellt xD.
Löscht du zufällig auch Kommentare? 😄
Hier gestern noch was gefragt und Kommi ist weg 🤔
Oder ich hatte den nicht abgesendet 🤣
@@thekillprograme813 Gelöscht werden nur Beleidigungen und die meistens von RUclips selbst, da muss ich selber i.d.R. nichts machen. Von dir habe ich jedenfalls keinen Kommentar gelöscht :(. Was war denn die Frage?
So if i got this video right, i should use 125Hz synchronization Default, for 120hz games? (PS5)
Yes if you want to sync your mouse movements to the framerate of the game. Alternatively you can also go Sync off and 125hz.
@@XIMCentral will give it both a try, currently using 250Hz and synchronization off, feels good to
Finally someone confirms that 125hz and off is xim 4 settings.
Antithesis kept telling me it's 250hz and default.
And to me he said its 500hz and slow! ;) ;) :P
@@XIMCentral i guess he is trolling every one xD
when the artificial voice sounds more real than the real voice
So if i play a game on the xbox series X at 60 Fps and i use the xim that is then plugged into another device capable of running at any polling rate the xim can run at and has the ability to select an input polling rate and output polling rate. What should these be set at to make them run effectively? Should my polling rates match on both devices?
Yes i would say have both of them running on the same polling rate.
@@XIMCentral would it make more sense to have mouse and Key/ xim to 1000hz then the input of the second device to 1000hz but output to 250hz? That way it is getting the information to the second device as fast as possible but only sending information to the xbox at its acceptable polling rate?
What setting should I use in BO4 , and should I match the same pulling rate on mouse to xim?
Hey, as long as the mouse polls at the same frequency or faster then the XIM you are fine. For BO4 i think default worked out the best, but for the actual values i would recommend to watch my dedicated BO4 config video.
What about dpi?
@@TheRealCarWashGuy I used 3200 dpi :).
Typically play seige. So no aim assist. So should my sync be on default because I'm running 120fps.for better reactivity? Have to up the sens. But I use common.
So I'm curious.
Hey, imo sync default plays best in Siege, which includes the 120fps mode! :)
Do you happen to know anything about the recent seige update? Sensitivity is extremely fast now in the app I went from 59 hip yo now like 22
@@dzrekmode7980 I will probably make a video on that sometime next week. In general thats a good sign as the lower the XIM Sensitivity the better the mouse movements.
I have a problem bro plz help me when I crouch spam on rainbow six siege with space it crouches when I don’t shoot but when I try shooting and crouch spamming with space at the same time it doesn’t crouch for me what could be the issue? I tried other keys still same result
Hey, this sounds like a binding issue in the sub config that is active when you shoot. Check your sub configs, im sure theres something wrong with the button bindings :).
@@XIMCentral oh wow I just found out my space was a different key for the other sub configd Thanks so much bro ur the best that’s why I been losing so many gunfights lol thank u so much ur the best man
Hi guys!! Just a quick question...
Do you recommend 125hz + sync off for aim assist? Or should stick to 250hz + sync off?
Great video btw!!!
125hz will have more aim assist than 250hz so id say it depends on if that is your target or not. Both will play fine so you have to decide if you prefer slightly more responsive mouse movements or more aim assist :).
@@XIMCentral thanks!!
@@XIMCentral oh and another quick question...
For example: with 250hz and sync off I have 100.00 sens on a random game, with 125hz and sync off should I lower this sensitivity to 50 for same sensitivity, right?
@@iceagex Yes thats correct!
So are you saying 1000hz default and 500hz default have different speeds? I only noticed the difference when I have the sync on "off".
They are the same, the polling rate will only affect your mouse movements when you use sync off :).
and if i use it on pc with a games that run at like 160-180 fps what sync will be better?and what polling rate? thanks
In that case you can either go default or off.
@@XIMCentral with what polling rate? Since i use a ps4 pad conneted the game should recieve 125 hz input?and what dpi for have good AA and nice precision
@@alkatraz9171 Lower polling rates will provide more AA whereas higher ones have less AA but more responsive mouse movements. There is not one best polling rate since everyone has a different preference for how responsive the aiming inputs should be or how much AA there should be.
@@XIMCentral ok thanks and the sync will affect that too?rn i am using common sync but wanted to with on default maybe
@@alkatraz9171 Yes that is correct. The faster the sync (off or default) the less AA you have but the more responsive the mouse movements will be.
I dont understand… one question:
I have a G502 4000 dpi 1000hz , i set xim at 250hz for this trick, right ?
Yes and sync off in your XIM HIP and ADS config :).
@xim central I bought a Xim apex and I have been using the Xim 4 for a long time. I have curves I use on my XIM4 how would I change the coding of the curve to work for the Xim apex.
Hey, the only way is to manually redo them, theres no way to transfer a curve between the two XIM models.
Moin, mal eine Frage,
wenn man nicht die neueste Firmware auf dem xim apex installiert hat dann funktioniert das in game auch nicht, richtig?
Also bräuchte ich für die normale ps4 die 2020er firmware korrekt?
Alle Firmware Versionen sind Rückwärtskompatibel ohne Einschränkungen oder Nachteile, du kannst also ohne Probleme die 2021er Firmware benutzen.
I dont speak english but if i play rainbow six siege at 120 FPS i need 1000hz poling rate or 125hz ? The game have no aim assit so which one i need to choose ?
Hey, good settings for RB6 are XIM 250Hz Sync Off or XIM 500Hz/1000Hz Sync Default.
Hallo hab jetzt eine ps5 und ich weiß ich bräuchte ein speziellen Controller für mnk und ich wollte fragen ob es sich lohnt noch so ein zukaufen oder schon eine Lösung habt und sie bald rausbringt das ich mit den ps5 Controller das auch machen kann
Hey, bevor die ersten offiziellen lizensierten PS5 third party Controller auf den Markt kommen wird es wohl keine DualSense Lösung geben. Und da bisher kein einziger Hersteller so einen Controller angekündigt hat wird es wohl noch mehrere Monate dauern. Zudem wird die Speciality Controller Lösung ja auch weiterhin möglich sein selbst wenn der DualSense Controller irgendwann kompatibel ist.
@@XIMCentral ok, vielen dank dann weiß ich Bescheid,dir noch ein schönen Tag ,und mach weiter so.
What should i use for overwatch and what synchroize
+what hz should i use for mouse
Hey, that depends on how much aim assist you want. If you want an aim assist oriented setup then go with the sync from my most recent OW config video, if you want a PC feeling then with the sync from the OW config video before that.
@@XIMCentral cause i watch the secret video u said the game with less 62hz need to play with common so i thought i should switch and u said that 1000hz its not usefull but in ow guid you recommend 1000hz so am confused can u explain
@@smurfonly5225 Hey, i did two OW config videos (my two most recent ones). Both configs are still valid. One aims towards the closest PC feeling, the other to maximixe aim assist while maintaining muscle memory. Neither of the two has the aim to only boost aim assist. This is not desireable in OW as you can fine tune the aim assist via the ingame settings anyway. So these secret aim assist settings are more valiable in games with (close to) no ingame aim assist customization. Since OW offers you to completely adjust the aim assist though the main aim assist boost comes from the ingame settings itself.
Does this mean if you are series s you should use defualt and if you are old gen you should use common? This is for r6
Hey, both the new and old Xbox runs on 250hz natively so default should perform best on both consoles unless you go snyc off 250hz. That is of course if you want to match your inputs to the processing loop of the game.
@@XIMCentral ty for the response, i play 1000hz. I find common best for me idk default doesnt feel smooth/consistent at all for me
Do you mean that sync off with 250hz is equal to sync default with 1000hz ? Both take 4ms to send input ?
What do you recommend for cold war
Sync off 250hz or sync default 1000hz
Btw i play on pc fps 200
Both settings have advantages and disadvantages in terms of aim assist and mouse movements, i would recommend you to try both and then stick to the one that feels best.
So I’m on common so do I divide it or multiply sorry I’m confused for 250hz
If you go from Common to OFF (250 Hz) then multiply Sensitivity by 4. The other video called *XIM Apex - Secret Aim Assist Settings From Alpha Testers* mentions this conversion at offset 2 minutes, 53 seconds.
Can I ask what polling rate works best with the cronus zen thanks
The Cronus Zen has a 10 millisecond cycle at max from what i know so you should set your XIM to 125hz. For a perfect sync i would recommend to use a Titan Two.
OK thank you
Thank you and any recent update on the new xim device
No update yet other than July unveil (probably).
@@XIMCentral hey my controller will not show up on the app even tho it’s connected the mouse and keyboard do but the controller does not ? Do you have a fix ?
@@XIMCentral I’m useing an Xbox one x not the series x the one x and it’s a controller that did not come with the Xbox on I bought separately
@@cpratt2544 Hey, it might be a slim/one x controller or one of the new series x/s controllers. Either way update your XIM Firmware to the latest beta firmware, if that doesnt solve it then it could be the cable between the XIM and the controller.
What is the best setting for Destiny 2 on PS4 Pro? Thanks
The PS4 version plays best with sync default or common imo, but i never tried 250hz sync off in it which could also work very well.
@@XIMCentral Thanks, I use 250hz sync off, no curve now, works well. Have used default with curve before. But the difference is minimal
What’s tie best sync in ur opinion for apex legends
Apex legends is #1 battle royale game can u do some toturials and tips plz
Member since 2017 ❤️❤️❤️
I am currently working on a new Apex Legends tutorial which will include that :).
So the mjfameconfig is too fast at 250hz on off, even with the curve maxed out. Would you try going to 500hz or should i lower the dpi?
Hey, adjust your XIM Sensitivity from 500 to 125 to keep the same speed as before with the MJFame config.
@@XIMCentral wouldn't that make it even faster? I thought mjfame was 1000hz on off? So 1000hz would be the slowest?
@@RandyMoss84vikes Yes exactly, and when you go from 1000hz to 250hz your sensitivity will be 4 times faster hence just set the XIM sensitivity for MJFame from 500 to 125hz :).
@@XIMCentral 250hz is too fast, so 125hz would be even faster
What is the best sync profil for Xbox Série ?
Hey, that depends on the mouse and game. Usually its best to try common, default and off in your favourite game and stick to the one that feels the most comfortable and accurate.
So what would I use for siege on xbox one or ps4? Since it has no aim assist and is 60 fps
I use common it’s definitely the best for ps4 siege
@@ConwayFPS same just wanted to make sure I play at like 75 sens wbu
@@ConwayFPS But siege doesn't run at 80 fps?
Tbh it all comes down to what you prefer. Some people prefer the smoother mouse movements with common, other like it more stuttery with default or even off. Most Ximmers will prefer either common or default, but id highly recommend you to try 250hz and sync off as well as thats a setting most people never tried but has great potential.
I think the game normally runs at 80fps on the console but with the recent release got capped to 59. At least thats what i heard, im not sure if its true.
Merci !
Can you PLEASE talk about the proper polling rate and synchronization for rainbow six siege for ps4.
They recently changed the frames and locked ps4 players back on 60 frames. I have been playing on default and 1000hz on ps4. My aim has felt off since this new season. Because of this change on ps4, should i be using 500 hz?
Hey, the responsible person at XIM is already creating a new ST for RB6 that takes these changes into account. Once its out you can use the same config values again that you have used in the previous season.
@@XIMCentral what is ST?
@@XIMCentral ok. So essentially there will be a new update for the xim configuration. Which we do not have to do anything for
@@XIMCentral ok. So essentially there will be a new update for the xim configuration. Which we do not have to do anything for
@@johnsnow2144 Yes, once its out you have to download it through the XIM Manager and then create a new game config. Your old one will not be patched.
I'm running into this issue with xim when I try to update it on pc. Says "Unable to find xim apex" "Please be sure your xim apex is connected to your pc without any devices attached to it and it is displaying a solid blue light" Which, it is displaying a solid blue light but still unable to connect?
Never mind, I got it working. Never the less if anyone else is having this issue. Try to restart your pc after downloading the update software. It worked for me, & hopefully it works for you too
Hi is it possible to set up silent shoot ? Thank you :))?
Hey, what is a silent shoot?
When will Xim apex support ps5 games?
What about polling for pc input?
Hey, see my "PS5 Compatibility Update" video on how you can already play PS5 games with your XIM :).
Thanks, I have a question about ads sensitivity on my xim apex. I was having a lot of disconnect and I had a message about an out of date st recreation. I forced game download and deleted the st that was giving me trouble. The new st I created has a 1:1 ads sensitivity and does not respond to any number I put. Can you help?
@@CaptObv1 Hey, im not exactly sure what you mean but when an ST is outdated (triangle error symbol in the bottom left) then you have to do a force library download via the global settings and create a new game config for that game. Let me know if that solved the issue.
@@XIMCentral thanks for the reply. Yes I’ve done all that you mentioned. The ads is not slower like I have always set it. It’s fast like my hip sens. I can’t get it to function like it used to
I have a question when I do a mathematical process with cheating I get a result of more than 600 ADS i use poling rat 1000 hz , my ADS(85.5×8=684) my sync in default plz need help
Hey, in that case you cannot achieve the sensitivity because it only goes until 500. Instead double your mouse DPI so you can set your ADS to 342 instead to have the same turnspeed.
If you do that anti recoil thing to us
That will be super cool..
If u can make it without any mouse shifting..
What if i used xim and cronus zen will i get that no recoil ?
Also is cronus zen shifts down when using no recoil ,?
Sorry for those questions but im really
Trying to get answers thanks
Hey, Cronus + XIM has a bad compatibility, get a Titan Two instead. Yes recoil scripts also have downsides similar to the trick that i showed in my automated recoil video.
I love so much xim apex 😍
How will sync slow work do I divide by 2? Or 2x?
Hey, here you have the conversion sheet: community.xim.tech/index.php?topic=100839.0
What sync best for apex legends & poling rate ?
Hey, i wanted to test that in the next few days as i plan to make a new Apex Legends tutorial video! :)
@@XIMCentral pls make a destiny 2 video also
@@XIMCentral waiting for Aoex Legends.
Off sync 100%
Hz not as sure but try 250 or 500
@@XIMCentral 😻🙏🙏
What is the best settings for apex legends ? And also can you guys increase the number of sub config ?
Today my new Apex Legends tutorial will go into early access, should be out for everyone soon! :)
@@XIMCentral thanks alot as always 🌹
@@XIMCentral @Xim central And please is there any way to increase sub config , i’m play apex and already have grenade , healing , inventory , recoil , and i need one more to loot the boxes with my mouse
@@darknessknight0 Hey, if you would like to see more sub configs then please share your request on the following board as new feature requests are gathered over there :) community.xim.tech/index.php?board=6.0
@@XIMCentral is there any release date 😊?
Does mouse polling matter much when testing this? I understand it should be equal to or higher than the XIM, but would leaving it on 1000 be a problem?
Thats perfectly fine if you leave it at 1000 :).
is there a way to create something which repeats a certain action? like infinitely crouching so i don’t get kicked for inactivity
The XIM doesnt support anything like that but if your mouse or keyboard does then you can use that instead.
Do you have a Xim aux that a could possibly control the new ash recoil 🤣🤣? Because every time I do the auto recoil aux where everytime you shoot it’s supposed to pull down it doesn’t work for me idk why I was wondering if you could just copy and paste maybe a default one and I could adjust the % so it works please ?
Hey, try higher values for Ash as with the most recent nerf her weapon has a ton of recoil. Also use the flash hider to reduce the vertical kick :).
@@XIMCentral I was wondering could you paste a Xim auxiliaries setting so I could try higher values because it doesn’t work for me at all when I set auxiliaries it doesn’t kick down automatically it only does it when I move my mouse it’s weird so I was wondering if you have just one you’ve used so I can just use and set my settings onit and use a higher value please?
@@Vu1gr Hey, this just means your currentl value isnt high enough yet. Some games require higher values before you even see some movement. The clips from this video have been done with the old aiming mechanic, Ubisoft changed it a while ago so the values from this video will have to be higher for RB6 now.
For PS4 what would be the way you can use these to get the best aim assist on the keyboard and mouse?
Hey, for that see my previous upload video :).
why did you remove the classic and updated config for rainbow six seige
The new config is Classic as it provides better mouse movements with the new aiming mechanic.
@@XIMCentral i compared the new one to the old classic version and the new one is diffrent so im just going to stick to the old classic config
@@XIMCentral also is there a discord for the xim apex?
@@c4lw896 Theres an inofficial community discord.
hello, if we but sync default at 1000hz the rate of the xim is at 125hz or 1000hz, seeing that the default changes between at 125hz, thank you
Hey, what do you mean exactly?
1000hz défaut sync same 125hz sync off ?
@@gugus42 Yes they are basically the same.
hey in r6 i only can peek right and left and meele and sprint at the same time because its the same button on ps4, so how can i fix it?
Hey, im not entirely sure what you mean with at the same time. When you are in the HIP mode you should be able to sprint/knife, while in the ADS mode you can lean left and right. You cannot lean in the HIP mode in console RB6, that is only possible in the PC version. Is that what you meant?
what't the best sync and polling for RB6 this season??, cuse it feels weird this season on aiming.... my mouse support 1000hz tho
I got my mouse on 1000hz my app 250hz and synchronization off
There will soon be a new ST for RB6! Then you should be able to have the same mouse experience as in the previous season again :).
@@XIMCentral thank God, i really appreciate all the work for the community... We really need that video ASAP, thank you.
@@JADC93 thanks for the answer... How much dpi are u using?
@@KurtJoga Im usually using 3200 dpi :).
nice jab at Tesla 😁
can u do competitive settings for warzone
Ill do Apex Legends next, after that i could check out Warzone again!
@@XIMCentral any update on this? :)
@@dariogalac8462 The Apex Legends video came out 2 weeks ago i think.
@@XIMCentral i was thinking about the warzone competitive settings :)
Edit: nvm saw the comment on other video ;),btw looking into the new xim device ;)
what’s your xim settings in rainbow six siege r6
Hey, for that see my "Competitive RB6 Config" video that i uploaded not too long ago :).
Hi, i have a problem. When i activate the automatizated anti recoil trick in rb6 when i shoot my aim go down with a small % like 20% for twich gun
Hey, you have to change the percentage until it matches your weapon recoil. You can further tweak it by using different barrel attachments or weapon grips.
@@XIMCentral ok now it works
So default and 1000hz is way to go with siege?
In my opinion yes, it feels the best.
When will the xim apex work with ps5 is there a date or time that’ll it’ll finally work ?
It does work, there are tutorials on the XIM Central channel showing you how to get it working.
Hey, its working for several months already, see my "PS5 Compatibility Update" video for the best solution :).
I am forced to play at 250hz on beloader, before I was playing at 1000 and in (default). i having on hip (110) ads (110) what calculation should i do to get back to 1000hz?
Hey, unless you are not using sync off then your sensitivity will be the same when you switch your polling rate. You can also stay on 1000hz though and ignore the purple lights. The Beloader will then accumulate your packets and send them as a 250hz signal to the console.
@@XIMCentral I started playing again recently but I remember that when I had the xim without beloader the sensitivity seemed to me faster at 1000 hz .. I can't understand .. so you are telling me that if I play with a 1000hz polling rate on beloader it is like if i was playing with 250hz on the xim anyway? so i just have to get used to this situation and get used to 250hz? .. because some say that beloader based on how it is configured also allows you to play at 1000hz .. enlighten me please
@@claudiovolaj4640 If you dont use sync off then your sensitivity is the same. Maybe the game has released an aim mechanic change and thus the sensitivity feels different. Beloader is locked at 250hz at the moment. With a PS4 v2 controller you can usually keep your XIM at 1000hz though without getting purple lights. But that wont change the Beloader and its 250hz.
@@XIMCentral I'll ask you two more questions then I'll stop. Why when I put 250hz and then I put 1000hz even if the beloader doesn't send more than 250hz the sensation of aiming is more fluid? Then since I haven't played for 6 months and am due from beloader, from your personal view how much does it change from 250hz to 1000hz as mouse sensation ?, not so give me the answer why not a chance to test it. thank you very much for your availability
@@claudiovolaj4640 Hey, it could come to a desync and as a result the delay could be doubled. So you get effectively downgraded to 125hz. Thats just a theory though for why you might experience that. Personally i keep my XIM at 1000hz when playing with the Beloader. I use a PS4 v2 controller and dont get any purple lights with it.
So you are using 125hz or 250hz？
That depends on what you want to achieve, aim assist, quality of mouse movements, repsonsiveness, ... I usually use 1000hz and sync default.
Default with 1000 polling rate
Take 8ms delay ?
Because when I tried 125hz sync off and default 1000hz
The default more responsive
Yes.
Yes it takes 8ms ?
When I use 250hz on the XIM & synchronization off, I get way too much aim Assist and is hard to land my shots onto the opponent. Is there a way for me to try to break the AA? I also tried 250hz on mouse and 1k hz as well. I don’t what hz to run neither for a g502 hero
Super high dpi man
Max DPI, 125hz and Default sync are the best settings I've ever used, nothing else comes close.
I been running 25600 dpi with synchronization off and still get way too much I don’t know why neither what what HZ to run for the mouse
@@Zombies8MyPizza how does that feel what hip and Ads do you use? Any curves with your configs?
@@andrewtorres7604 Mouse polling doesn't matter much as long as it's equal to or higher than your XIM polling. So if you're using 250hz on the XIM then anywhere between 250-1000hz on your mouse will produce the same result since the input is capped at whatever the XIM is set to.
My HIP and ADS values are basically irrelevant as the values and ratios will change from game to game as the translators are different. For Black Ops 4 as an example though as that's currently my main game, I use 4.5 on HIP and 2.8 on ADS. Plain curve on HIP and RML anti aim assist curve #6 on ADS.
Are you planning on making a Rust Console Edition config tutorial?
I can add it to the list!
@@XIMCentralplease fast haha
Is there a way to make a sub config reactive right away after deactivation without another button press? I’m trying to make something easier and I can’t figure it out
Hey, there is no deactivation trigger for sub configs so no, you cannot have a sub config activate by no longer pressing a key/button.
@@XIMCentral Since you're far more experienced with xim could you help me make crouch strafing effective and easy in apex legends? I've spent a lot of time and everything I can do is clunky or messes other things up
@@CevsyOld How does crouch strafing work? What kind of button sequence do you have to press?
@@XIMCentral While strafing left and right you hold crouch long enough that it lowers your model and you repeat it over and over while strafing. When you do it right your character looks like they bob up and down while moving making it harder to be hit
so would i need to run common sync for siege?
Id say wait first until the new RB6 ST is out before settling on a sync! :)
does xim apex work on ps5 version of siege? if so, how to i configure it?
Yes it does, see my "PS5 Compatibility Video" on the actual setup details :).
Can you help me to fix the Azeron? I have a Xim4 but my Ps4 don't see the analog stick. Please help me! 😭😭
Hey, i think the Azeron has to be put into a specifc mode to work with the XIM, the Azeron homepage should have instructions on what to do when using it with a XIM.
Kam irgendein neues Firmware Update seit Dezember 2020? Habe länger pausiert.
Danke für eure Arbeit.
Ja das PS5 XIM Beta Update für die Spezialcontroller (siehe mein PS5 XIM Compatibility Video).
@@XIMCentral Ah für Ps5
Alles klar, danke 👍🏻
for ww2 ps4 what is the best ?
Hey, for that check out my dedicated WW2 config video. Im no longer sure what the best one for that game is but it should be explained in the video :).
hey! Today we got a new download option in global settings for rainbow Six Siege, it's called rainbow Six Siege UPDATED, there is no longer an option to recreate Classic configurations, my sensitivity therefore feels completely different, any help?
Hey, i might make a video on that soon, but the new config is a Classic config and you might have to use different ingame options now.
@@XIMCentral its telling us to use a standard 100 100 10 10, but with the standard 75 ads, but the hip and ads sensitivity itself feels sooo much faster
@@serenitymint What ST did you previously use? Sensitivities stayed the same for me between the version 8 and new version 9 ST.
@@XIMCentral what do you mean by ST sorry?
@@serenitymint ST = Smart Translator, the tech iniside your XIM config that realizes the mouse movement. When a new aim mechanic update is added by the game developer a new ST is required that is optimized for that mechanic (to realize the best mouse movements).