Everyone must be looking for PVC pipe after seeing this creative idea! DIY Vinilon PVC Pipe

Поделиться
HTML-код
  • Опубликовано: 22 дек 2024

Комментарии • 643

  • @cwitham69
    @cwitham69 Год назад +50

    I learned a lot, especially liked the pinpoint tapered drill bit that you use; how far you drill through is how large the hole you want. It's a very well-done project, thank you! I put it in my library to share. The funny thing is, years ago as an electrician for Ford Motor I had to build a tool tote exactly like that except it was made out of EMT thin wall conduit & end cap fittings. These were actually very practical when you need to work in a confined space after crawling/climbing to get there. The two things to add would be a shoulder strap & a lanyard safety catch. I really like this PVC type. I actually made a handle exactly like you did but out of 3/4" EMT pipe squeezed and bent in a vice. Great job!

    • @GaleriSaturasi
      @GaleriSaturasi  Год назад +1

      your comment is very genius with the description, it's true that many things can be done with these tools, I also still want to complete other sharp drill bits for PVC crafts, greetings to you

    • @zapeirsky
      @zapeirsky Год назад

      NICE BUILD.......I M WANTING TO SEE SOMEONE BUILD THE SAME OUT OF POLYETHYLENE............MUCH MORE DURABLE ......I HAVE DIFFERENT SIZES AND THICKNESSES........THE NEW WATER PIPE THAT KEEPS SHOWING UP IN LARGE RESIDENTIAL IS THIS BLUE polyethylene........

    • @ПетрБогданович-ц1б
      @ПетрБогданович-ц1б Год назад

      Можно не заморачиваться скидать инструмент в мешок каждый ключ придётся искать вся мелочь внизу пока крупное не выложить мелочь не найти

    • @ArtsandCraftsCreator
      @ArtsandCraftsCreator 11 месяцев назад

      Thank you for talking about how to use patented drilling from PVC plastic. If you are a technical enthusiast, don't miss my channel. It won't disappoint you. Once again, don't miss them.

    • @CreatorTips.007
      @CreatorTips.007 2 месяца назад +1

      Pretty cool idea, well done man.

  • @sethc6663
    @sethc6663 Год назад +15

    Cool idea, I'm going to make one with a smaller diameter pipe and use it for my pencil/pen case to put in my school bag. Thanks for showing this 👍

    • @GaleriSaturasi
      @GaleriSaturasi  Год назад +1

      great idea, definitely smaller is cooler, thanks for coming

  • @bobdunstan5457
    @bobdunstan5457 Год назад +14

    Interesting build. One suggestion that will make installation of hinges and latches it to drill them in before cutting out the lid. That way they will already be perfectily aligned.

    • @GaleriSaturasi
      @GaleriSaturasi  Год назад +2

      great idea, thanks for the advice

    • @stevenjolls8968
      @stevenjolls8968 Год назад +2

      They make end caps for all size piping as well. Saves a lot of work. And thank you for your idea on the hinges and such. GREAT suggestion.😁

    • @stevenjolls8968
      @stevenjolls8968 Год назад +1

      Those pointed screw ends are going to play havoc on the backs of hands coming and going from that box!😬

  • @dethcreeper69
    @dethcreeper69 Год назад +2

    That is a grand idea.
    Only thing I'd alter is to get all the drilling done before you paint saves the white showing through on the handle.
    The way you made the handle I'd never have thought of it.
    Thank you for a very good video

    • @GaleriSaturasi
      @GaleriSaturasi  Год назад +1

      thanks for the inputs sir

    • @dethcreeper69
      @dethcreeper69 Год назад

      @@GaleriSaturasi it's just a suggestion and in no way a slight on your fabulous work. This is something plenty of folk would love to own.
      Again thank you for your video. Have a peaceful day 😊

  • @PajenDIY
    @PajenDIY 9 месяцев назад

    Very creative idea

  • @OscarDelgadoMalafacha
    @OscarDelgadoMalafacha 2 месяца назад

    Buenísima idea. Has hecho un arte del plástico. Saludos y gracias.

  • @АндрейОлегович-е9ш

    Ура! Сначала результат, потом изготовление! 👍

    • @milanotsetus
      @milanotsetus Год назад

      Да, вот этим удивил он, канешна. Тут ему респект

  • @ВадимКузнецов-з2й
    @ВадимКузнецов-з2й Год назад +1

    Молодец веймастер!- я то-же буду делать себе такой-же кофр!- только другого цвета - оранжевого!!!

    • @GaleriSaturasi
      @GaleriSaturasi  Год назад

      конечно, результаты, которые вы делаете, очень крутые, счастливая работа

  • @mencariteman9432
    @mencariteman9432 Год назад

    keterampilan tangan yang luar biasa, dari bahan yang biasa saja bisa menjadi barang yang sangat luar biasa, mantap

  • @creatividartesanal
    @creatividartesanal Год назад +4

    Felicitaciones, no solamente es práctico y útil, sino también, bonito.

  • @ChandraMCraft
    @ChandraMCraft Год назад +2

    Luar biasa keren.....top markotop suhu 👍👍❤

  • @luiszta840
    @luiszta840 Год назад +11

    Fiz um negocio parecido para guardar os espetos de churrasco. Mesmo estilo, inclusive usei o mesmo tipo de fecho, só que fiz com tubo de 150mm e instalei na vertical. Fica bem bacana, nem parece feito em casa com tubo de pvc.

    • @GaleriSaturasi
      @GaleriSaturasi  Год назад +2

      seu trabalho com pvc de 150 mm é muito legal, parabéns

    • @AriDoVale
      @AriDoVale 9 месяцев назад

      Será que dá pra vender, fazendo uns três desses por dia?
      Venderia por quanto?
      Tem pessoas que adoram novidades, principalmente aqui onde eu moro.

  • @porfirioabad9541
    @porfirioabad9541 9 месяцев назад

    Excelente trabajo creativo. Felicitaciones y muchas bendiciones.

  • @vadimprodan6806
    @vadimprodan6806 Год назад +8

    риспект за старание, но результат не стоит затраченной энергии))

  • @jesuscastillo5804
    @jesuscastillo5804 2 месяца назад

    Excelente 👌.... saludos desde Venezuela

    • @GaleriSaturasi
      @GaleriSaturasi  Месяц назад

      Gracias amigo de Venezuela, tu apoyo es extraordinario.

  • @sunilkumarmpande4774
    @sunilkumarmpande4774 9 месяцев назад

    Very nice!!! To be Perform every task likewise..... Aesthetically..... !!! It's very small thing but looking nice... .. If we do each work in this fashion...!!! 🎉🎉

    • @GaleriSaturasi
      @GaleriSaturasi  9 месяцев назад

      thank you, I really like the details of the smallest things

  • @golezadesignerslimited1288
    @golezadesignerslimited1288 5 месяцев назад

    What a nice idea! You're really very creative. I am going to try it out. Thanks for sharing.

    • @GaleriSaturasi
      @GaleriSaturasi  5 месяцев назад

      Good luck, and I would be happy if you share the results here

  • @jesusisgod6474
    @jesusisgod6474 6 месяцев назад

    Thank you for the video. It gives me the idea to make it with different pipe sizes.

    • @GaleriSaturasi
      @GaleriSaturasi  6 месяцев назад

      good luck, hopefully it will inspire you, you can be creative according to your brilliant ideas

  • @akubisasendiri
    @akubisasendiri 11 месяцев назад

    Tak terpikirkan paralon bisa jd toolbox, good idea

    • @GaleriSaturasi
      @GaleriSaturasi  11 месяцев назад +1

      Terimakasih bang

    • @akubisasendiri
      @akubisasendiri 11 месяцев назад

      @@GaleriSaturasi moga ketularan berkahnya bg

    • @Aidilaja0909
      @Aidilaja0909 2 дня назад

      Kebanting apa ngga pecah atau retak gtu? ​@@GaleriSaturasi

  • @knivesgunfights526
    @knivesgunfights526 Год назад +1

    Wow! Someone has way too much time on their hands. And all I can say is that's Awesome. This is amazing and actually is something that I can probably do...even at my age (75 yoa). You have a new subscriber here. Thank you.

    • @GaleriSaturasi
      @GaleriSaturasi  Год назад +1

      I just want to be creative with my ideas, you can also explore your ideas even at the age of 75, you can

  • @aboob-k1z
    @aboob-k1z Год назад

    Good 👍👍👍

  • @nievesmartinsantamaria5337
    @nievesmartinsantamaria5337 Год назад

    muy chulo y super creativo... me encanta. gracias por compartir

  • @HiFiFilos
    @HiFiFilos Год назад +1

    Agradecería mucho un boombox, gracias, saludos desde tierra azteca.

  • @62gordis
    @62gordis Год назад

    Felicitaciones, excelente idea. Se podría hacer de 6 pulgadas? Gracias

  • @marcelospuntone5178
    @marcelospuntone5178 8 месяцев назад

    Hola excelente trabajo !!!! Te escribo desde Uruguay
    Te quería consultar que pegamento usas?

    • @GaleriSaturasi
      @GaleriSaturasi  6 месяцев назад

      hola a los de URUGUAY ¿cómo están? El pegamento utilizado es superglue o powerglue.

  • @pattopatricio
    @pattopatricio Год назад

    Qué lindo, ingenioso y entretenido trabajo, Bravo y muchas gracias 😍👋👋👋👋👋

    • @GaleriSaturasi
      @GaleriSaturasi  Год назад

      gracias, espero que este video sea de utilidad

  • @licustoms
    @licustoms Год назад +28

    Another trick you could have used when sanding the feet/legs is to use the main body of the PVC tube as your base and contour (lay down) a sheet of sandpaper on the body and then sand your feet against it until they matched. That way they would already match the contour of the piece you were going to be attaching them to.

    • @GaleriSaturasi
      @GaleriSaturasi  Год назад +2

      thanks for the advice, great idea

    • @leonardobernardoalves
      @leonardobernardoalves Год назад +2

      it's a 100 mm pipe a cover is sold for it that already solved half of the video, also there's no reason to use screws on the cover superglue would solve it!!

  • @mariadelosangelesbuenocald800
    @mariadelosangelesbuenocald800 Год назад +2

    Muy linda y práctica la caja de herramienta.

  • @luispasteneslamas6944
    @luispasteneslamas6944 Год назад

    Excelente amigo se agradece saludos desde Chile 👍😎

  • @baltazarcastro7487
    @baltazarcastro7487 11 месяцев назад +1

    Hola me pareció un trabajo excelente, me puedes apoyar diciéndome dónde puedo conseguir ese tipo de broches , soy de Cuernavaca Morelos, México

  • @pikifrino
    @pikifrino Год назад

    Congratulations!..very good job!.. Thank you

  • @JoseAruquipa-b3f
    @JoseAruquipa-b3f 3 месяца назад

    Saludos.
    Una consulta hasta que punto es resistente lo colado o pegado si sufre una caída de una mesa se desarma.gracias

    • @GaleriSaturasi
      @GaleriSaturasi  3 месяца назад

      Este objeto es lo suficientemente fuerte como para sostener llaves o herramientas de taller en casa, y no pegué todas las conexiones, atornillé algunas para que todo esté calculado.

  • @TheCulichy
    @TheCulichy Год назад

    Yo hice un mas grande para dos cañas de pescar, así no se maltratan, tu estuche pequeño quedó bien padre, saludos.

  • @manimirajlangadi550
    @manimirajlangadi550 10 месяцев назад +1

    Nice video😊😊

  • @AlexandraVielma-b1e
    @AlexandraVielma-b1e Год назад

    Geniaaall !! Yo lo usaría más largo, para guardar y llevar mis dibujos de diseño a la facultad, bello, eres un genio !!

  • @Elc0chin0
    @Elc0chin0 Год назад

    Best video yet!
    Now where do I get PVC that thin?

    • @GaleriSaturasi
      @GaleriSaturasi  Год назад

      You can find it in building stores around your house

  • @juanquijano9612
    @juanquijano9612 10 месяцев назад

    GRAN IDEA....MUY BIEN GRACIAS POR VIDEO

  • @FluffyD88
    @FluffyD88 6 месяцев назад

    you should post this on instructables...them diy kids would go crazy for this

  • @ademaranselmo9791
    @ademaranselmo9791 11 месяцев назад +1

    Esse cano de pvc de qtas polegadas é

    • @GaleriSaturasi
      @GaleriSaturasi  11 месяцев назад

      4 polegadas ou 110 mm de diâmetro

  • @cesarcobo4791
    @cesarcobo4791 Год назад

    Muy lindo trabajo felicitaciones 👏 🙌 🎉desde Colombia

  • @williansbaille2919
    @williansbaille2919 Год назад

    Desde venezuela te felicito 🙋‍♂️.
    Que gran idea,ya tienes un nuevo seguidor,voy a hacer una para mis herramiemtas👍.GRACIAS

    • @GaleriSaturasi
      @GaleriSaturasi  Год назад

      gracias a ustedes en venezuela por apoyarme, y feliz trabajo

  • @jayedwin98020
    @jayedwin98020 Год назад +2

    Is here any way the hinge could have been mounted on the inside?
    Also, could pop rivets have been used inplace of screws?

    • @GaleriSaturasi
      @GaleriSaturasi  Год назад +1

      it could be that the hinges are installed inside, only later the remaining screws will stick out, and the use of rivets is good too it seems

  • @MostefaMatallah-bd3bh
    @MostefaMatallah-bd3bh 2 месяца назад

    Bravo et merci de l'Algérie.

  • @imamsyibli212
    @imamsyibli212 14 дней назад

    Wih mantep bang terimkasih ilmunya

  • @henryecheverria239
    @henryecheverria239 Год назад +1

    Gracias felicitaciones y siempre adelante buen trabajo ❤❤❤❤❤

  • @IdeasLokasdeNegocios
    @IdeasLokasdeNegocios Месяц назад

    Es un hermoso trabajado recomendable para emprender, muy bueno💰💴💵

  • @leonardonaranjo3169
    @leonardonaranjo3169 3 месяца назад

    Ecxelente idea muchas gracias

  • @noemilazcano4169
    @noemilazcano4169 Год назад +1

    Muy lindo y prolijo, gracias por la idea!

  • @Cleaningthehouse23
    @Cleaningthehouse23 Год назад +1

    Great working idea! thank you for sharing

  • @Ronald-qj5nx
    @Ronald-qj5nx 7 месяцев назад +1

    Use PVC pipe end caps to seal the ends of the pipe, much stronger than the infill method used here.

    • @GaleriSaturasi
      @GaleriSaturasi  6 месяцев назад

      that's better, create according to your ideas, good job

  • @XayrulloTojiboyev-cm9xw
    @XayrulloTojiboyev-cm9xw Год назад

    Гап йу́к uzbekistan

  • @MasterK9Trainer
    @MasterK9Trainer Год назад +14

    That's amazing because I was thinking of making the same thing except I wanted it to serve as a shoulder bag since I saw something like this on Star Trek: Next Generation.

  • @mkhanmaqsood
    @mkhanmaqsood 4 месяца назад +1

    Excellent work,i learned a lot,thanks

  • @LC-tb3mf
    @LC-tb3mf Год назад +1

    Excelente idea amigo👌👍💪

  • @mostefamaatallah7564
    @mostefamaatallah7564 9 месяцев назад

    Bravo et merci.

  • @Гена-ю9д
    @Гена-ю9д Год назад

    Not bad idea💡👍

  • @ReneSchonwald
    @ReneSchonwald 9 месяцев назад

    Bello! me encanto gracias por compartir.

  • @ВикторияПоплевина-р8у
    @ВикторияПоплевина-р8у 4 месяца назад +1

    От женщины, просто красавчик, супер ❤

  • @daveallen2455
    @daveallen2455 Год назад

    Bravo !!!!

  • @julioroblero859
    @julioroblero859 9 месяцев назад

    Bery Good Job my friend ..

  • @conteni2lauv604
    @conteni2lauv604 Год назад

    Excelente obra.
    Eso no es un trabajo sino una obra de arte.
    Lo felicito.

  • @manuelguindo6620
    @manuelguindo6620 Год назад +1

    ¡¡ Impresionante ¡¡ Crack

  • @gilsonfrancisco6925
    @gilsonfrancisco6925 Год назад

    magnifico👏👏👏👏

  • @АлександрСкуратов-о3г

    Можно использовать как чехол для ношения и хранения чертежей на стройке

  • @kelanaground
    @kelanaground 11 месяцев назад

    Ide kreatif yg bisa ditiru.. Terima kasih.. 10:11

  • @NeilBates-k3t
    @NeilBates-k3t 6 месяцев назад

    The principal that’s been established shows we can use any diameter of pipe or any length for different applications, a well thought out idea, PS I don’t know why people who pour cold water on good ideas even bother to watch the video in the first place

    • @GaleriSaturasi
      @GaleriSaturasi  6 месяцев назад

      That's right, here I'm just sharing the concept idea, I'll leave the implementation to the audience whether they want to make it with another diameter or just watching is enough.

  • @general5104
    @general5104 Год назад +1

    This would be a great LUNCHBOX.
    Thanks for posting.
    Bill, from Tn. 🇺🇸

  • @valmirjose7562
    @valmirjose7562 Год назад +1

    Ideia maravilhosa, vou fazer meu porta ferramentas desse

  • @jross008470
    @jross008470 Год назад +1

    I've been needing a lock box, but I did not want what everyone else had! So thank u sm for sharing! It gave me so many ideas! I'm on my way to Home Depot 😂 new subscriber!!!

    • @GaleriSaturasi
      @GaleriSaturasi  Год назад +1

      thank you madam, turn your idea into a masterpiece

  • @paulfernandez2695
    @paulfernandez2695 Год назад

    Xcelent creativity and execution. Congratulations

  • @MannyVel
    @MannyVel Год назад +3

    Excellent work ! ....not precision 'machinist' work, but damn.... I'd buy it 🙂

  • @cristovaoferreira3552
    @cristovaoferreira3552 Год назад +1

    Very nice !

  • @ОлегДудин-у4б
    @ОлегДудин-у4б Год назад

    Крышку лучше заклепать через шайбу внутри,идея ништяк 👍👍👍

  • @YOUTFiNiTY
    @YOUTFiNiTY Год назад +2

    😃🌍❤️ WoW Very good.

  • @angelrichardmosqueramatos2456
    @angelrichardmosqueramatos2456 Год назад

    Hola! Me haré una así! Saludos desde Venezuela!

    • @GaleriSaturasi
      @GaleriSaturasi  Год назад

      Estoy esperando tu trabajo, debe ser genial... saludos desde Indonesia

  • @VWonder737
    @VWonder737 4 месяца назад

    Very cool.

  • @DIYCREATIVE8511
    @DIYCREATIVE8511 Месяц назад

    Very interesting and detailed video, friend...

  • @АлексейКозлов-ъ3ч
    @АлексейКозлов-ъ3ч Год назад +5

    До чего же пес полезная вещь.

  • @Mr79xlh
    @Mr79xlh Год назад

    love it that was simply amazing

  • @putras354
    @putras354 Год назад

    Langsung saya suscribe ide nya josss mantap salam dari sul sel

  • @luistejada165
    @luistejada165 Год назад

    La humanidad cambiará de rumbo con esa idea.

  • @luisalbertokumis3987
    @luisalbertokumis3987 Год назад

    Buena idea, pero muy pequeño para las herramientas y muy grande la agarradera.😊

  • @freepatriot6313
    @freepatriot6313 Год назад

    Simple things...fascinate simple minds

  • @Tatal.b
    @Tatal.b Год назад +8

    Brulhante idéia 👍

  • @creativetdt23
    @creativetdt23 Месяц назад +1

    I like these Videos!

  • @alexey8615
    @alexey8615 Год назад +3

    Хорошая идея .

  • @fernandomartinez9790
    @fernandomartinez9790 Год назад

    Excelente video, ya me suscribí, saludos desde el estado de Coahuila, México ...!!!

    • @GaleriSaturasi
      @GaleriSaturasi  Год назад

      gracias, saludos a los hermanos de Coahuila, Mexico

  • @carlosfalla8749
    @carlosfalla8749 7 месяцев назад

    Excelente !!!! Gracias

  • @Igor-ce7ii
    @Igor-ce7ii Год назад +1

    Интересная идея.Так можно ,правда немножко по другому изготовить тубус для чертежей и чехол для переноски удочек!

  • @odairsilva6182
    @odairsilva6182 Год назад

    Very good 👏👏👏

  • @joaoalvesdesouza2812
    @joaoalvesdesouza2812 Год назад

    Parabéns muoto bem elaborado este resproveito..muito bom mesmo

  • @donaldjohnson3265
    @donaldjohnson3265 Год назад

    Great Idea. Thanks

  • @vitalisev9779
    @vitalisev9779 Год назад

    Удет браво мастеру !!!
    Только один вопрос что за партизанский клей???

  • @cristiano9318
    @cristiano9318 8 месяцев назад

    Exelente trabajo 🤞✌️👍👍

  • @sirunawan75
    @sirunawan75 Год назад

    That's amazing because I was thinking of making the same thing except I wanted it to serve as a shoulder bag since I saw something like this on Star Trek: Next Generation.
    amaazingg

  • @MarceloPacheco-d6d
    @MarceloPacheco-d6d Год назад

    Me gustó. Muy bueno. Felicitaciones

  • @OscarGonzalez-kh7kr
    @OscarGonzalez-kh7kr 7 месяцев назад

    Espectacularrr

  • @sergiofelix46
    @sergiofelix46 Год назад

    Perfect for my fishing hooks and jigs... new follower thanks for sharing

  • @lsolis293
    @lsolis293 Год назад +4

    Muy util y con un bajo precio, me encanto😮

  • @mandeep4782
    @mandeep4782 Год назад +1

    Very nice