Your school is so informative I always love the way you explain all the razzle dazzle you can do to a v twin. Could you explain exhaust reversion and what is important to know and what you need to do to squeeze out that little bit more R D
Good Morning 😊 G Bryce from J'ville FL Maddogg,I use to be around Bold city racing back in the Day LoL U put J'ville FL on the Map in the early 80's & You still a BADD Mann LoL I'm 63yrs old now I still light up when yo Name call an I'm a middle aged BLK Man now Stay Blessed U still Down to Earth 🌎
This was great! Currently have the S&S 475 on my 22 RG ST 117 tuned and dyno’d w/ Thundermax. I’m seriously considering moving to your 30/30 for next season because of the rave reviews and the earlier torque pull in the rpm. Still deciding.
M8 114 with fab28 exhaust, does anyone have a 3030 cam with this setup? I seen somewhere that the 3030 cam works best with a longer exhaust to help balance out low end torque.
I owe a 2020 flhxs. I have the Khrome werks header/4.5 mufflers and Khrome Werk open air filter. Star 3030 seems to be set up for the D&D 2-1. Mine is 2-1-2 no cat headers. Is a3030 a good set up for Khrome Werks ?
Thank you for these awesome cams! I am putting the 3030 in my 114 Ultra this weekend! I have to put a new oil pump in because mine is a 2017 with the notso good oil pump, so I might as well cam her up as well!! Can't wait to feel her after the install. I do have a question, do you recommend replacing the stock cam plate, or is it a good one from HD? Thank you sir! New Subscriber here! God Bless you Mr. Bryce!! Love to listen to a man not afraid to talk about his Savior!!
will the f35a work on the harley stage four 117 kit? valves and springs have been redone. engine builder worried about the valves hitting the piston. pistons are 11 to 1.
Which one would you recommend for a 117 ci stage 3, 2into 1 Bassani road rage, big breather, 6.2 injectors ans HPi 62mm manifold and throttle body streetglide 2019? I wanna try that 30/30 , but I don't know which one pick I want power n torque but again I want longevity on my motor
sir I have a stock 2022 114ci fat boy with a s&s 465c cam and I want to put a new 55 throttle body so should I put bigger fuel injectors ? just heard u say your 68 , I am 71 so try to remember it's just a number.
George thinking about installing your spring kit in my 107 m8. If I install them is spring height critical. I'm using your 30-30 cam. But I want the stock springs out of there don't trust them.
Once that 117 warmed up it I fell in love!
I just found your channel.
I just got a 24 street bob with the 114.
Your school is so informative I always love the way you explain all the razzle dazzle you can do to a v twin. Could you explain exhaust reversion and what is important to know and what you need to do to squeeze out that little bit more R D
Thank you for your tech talk. Enjoy your videos
Good Morning 😊 G Bryce from J'ville FL Maddogg,I use to be around Bold city racing back in the Day LoL U put J'ville FL on the Map in the early 80's & You still a BADD Mann LoL I'm 63yrs old now I still light up when yo Name call an I'm a middle aged BLK Man now Stay Blessed U still Down to Earth 🌎
Great stuff as always George, the show and tell was kool.
Love your teachings. Blessings
Another great class, thank you for sharing.
I like the 30/30 in my 107 with 117 hp&119tq , waiting for warmer weather
Thanks for sharing--- Question what kind of numbers is the ST low rider with the 30-30 cam & D&D exhaust producing?
This was great! Currently have the S&S 475 on my 22 RG ST 117 tuned and dyno’d w/ Thundermax. I’m seriously considering moving to your 30/30 for next season because of the rave reviews and the earlier torque pull in the rpm. Still deciding.
Hello mr George, I have a question for you, How to select the right spring rate of the valve spring so I do not stress unnecessary the valve train?
Outstanding performance Bubba ❤
Please again I ask. Need some explanation on exhaust reversion. What is it exactly and is it a factor in pipe design and tuning. Please.
M8 114 with fab28 exhaust, does anyone have a 3030 cam with this setup? I seen somewhere that the 3030 cam works best with a longer exhaust to help balance out low end torque.
How are you keeping these air-cooled engine cooled
Thank you sir!
Someday I will get my schedule in order and make it on time!😂
Hi from Miami Florida I always enjoy your Tech talk just saying
Thanks George
Rewatched this I'm wondering if you ran the F35a in a 107 engine ? If so what kind of numbers did you reach ?
Coming in loud and clear😊
Do I need to replace the valve springs with the 30/30 cam swap on the 117ci motor
I owe a 2020 flhxs. I have the Khrome werks header/4.5 mufflers and Khrome Werk open air filter. Star 3030 seems to be set up for the D&D 2-1. Mine is 2-1-2 no cat headers. Is a3030 a good set up for Khrome Werks ?
Thank you for these awesome cams! I am putting the 3030 in my 114 Ultra this weekend! I have to put a new oil pump in because mine is a 2017 with the notso good oil pump, so I might as well cam her up as well!! Can't wait to feel her after the install. I do have a question, do you recommend replacing the stock cam plate, or is it a good one from HD? Thank you sir! New Subscriber here! God Bless you Mr. Bryce!! Love to listen to a man not afraid to talk about his Savior!!
Hows the f35a do with a little compression bump?
so much nicer with you tube hear and see you from Naples Fl
That sounds good.
What's the HP / Torq with that 30/30 cam
2nd gear leave is 2 stroke sand/dirt launch
will the f35a work on the harley stage four 117 kit? valves and springs have been redone. engine builder worried about the valves hitting the piston. pistons are 11 to 1.
Hey just subscribed... what the torque and horsepower on the el diablo ST? Thank you
Wow! You have some very nice rides!
Can you do the 30 30 cam in a 114 . Or do you need to upgrade the valve springs,rocker arms. And what kind of numbers could I expect.
No upgrades required! Bolt in. 120-125 HP
Which one would you recommend for a 117 ci stage 3, 2into 1 Bassani road rage, big breather, 6.2 injectors ans HPi 62mm manifold and throttle body streetglide 2019? I wanna try that 30/30 , but I don't know which one pick I want power n torque but again I want longevity on my motor
Do you have any sportster cams?
sir I have a stock 2022 114ci fat boy with a s&s 465c cam and I want to put a new 55 throttle body so should I put bigger fuel injectors ? just heard u say your 68 , I am 71 so try to remember it's just a number.
What cam is comparable to the
S&S 550 cam ? That you have
AWESOME ! im very impressed 👌
George thinking about installing your spring kit in my 107 m8. If I install them is spring height critical. I'm using your 30-30 cam. But I want the stock springs out of there don't trust them.
What year bike is Blue 5.0?
Hi George, where did the 30/30 name come from?
Old school 1970’s
I got you, Bryce!
can you drop the 572 with stock OEM oil pump / camplate or do you recommend upgradding, also does your cam come with the upgreaded cam bearing?
lets hear it sir
Who makes the 30/30 cam
Star Racing
I’m here and hear great
Hi George
Hell yeah
Good stuff
Yes
I hear you
Hello dennis loud clear
Yes😊
Hello we are out here
Super builder
👍
you are still on at 17:44
Too bad Mr. George does not answer any questions
Hello
you don't reply
Iol
Yes😊
Hello I’m really learning a lot from your videos