Why are you taking off the fan shroud, belt and top radiator hose? And definitely didn't have to move the A/C compressor. You did a good job but could have saved on labor time fir sure
Yeah, so we never got to hear it run....not even on the spray can. I was just wondering how.... if the coil was out on it, how did it even run on the spray can? Cranks with the starter good though.
I did this same job about a month ago. Horrible job because that injector pump gasket is terribly easy to tear and not so easy to replace and if it tears you will have a vacuum leak. Huge performance boost when it was all said and done.
@@THATNI99AJOHNmulti-port injection instead of central fuel injection. You get more power and efficiency because the engine can more accurately deliver the correct amount of fuel to the cylinders.
I’m doing this for my truck rn, When you were putting the intake back on was it a big struggle? I’m struggling to get the opening and mfi injector thing to seat i got some Vaseline as lubricant but any tips would be appreciated
I wouldn't say it was a struggle bit for sure the intake cover won't sit all the way but make sure nothing is blocking it. I had first started all the bolts loosely and went around and around tightening them down till it closed up. Shouldn't feel any binding. Turn them a little at a time don't want it to go on cockeyed
You need to have the intake tube hooked up or the MAF will not read the correct amount of air flowing into the engine
Why are you taking off the fan shroud, belt and top radiator hose? And definitely didn't have to move the A/C compressor. You did a good job but could have saved on labor time fir sure
Love those Classic 90’s Silverado Chevys! Get her purring! 😎🤙🏻 Flush and clean that engine good! So was in the coil all the long?
it was multiple things, starting with whole fuel system, burned wires and distributor, just posted on it.
Do you have a part number to the injector assembly?
It wasn't the security antitheft thing happening ?
Yeah, so we never got to hear it run....not even on the spray can.
I was just wondering how.... if the coil was out on it, how did it even run on the spray can?
Cranks with the starter good though.
I got updated vids on it, wires were broken/cut so sometimes would run, sometimes wouldn't
Good video man I’ll b doing mine in a couple weeks 👍 thanks for reference
I did this same job about a month ago. Horrible job because that injector pump gasket is terribly easy to tear and not so easy to replace and if it tears you will have a vacuum leak. Huge performance boost when it was all said and done.
lube it with oil on both the gasket and the plastic part of the plenum
the updated injectors are on rock auto
Updated injectors ?
@@THATNI99AJOHNmulti-port injection instead of central fuel injection. You get more power and efficiency because the engine can more accurately deliver the correct amount of fuel to the cylinders.
How much did you pay for the truck?
I’m doing this for my truck rn, When you were putting the intake back on was it a big struggle? I’m struggling to get the opening and mfi injector thing to seat i got some Vaseline as lubricant but any tips would be appreciated
I wouldn't say it was a struggle bit for sure the intake cover won't sit all the way but make sure nothing is blocking it. I had first started all the bolts loosely and went around and around tightening them down till it closed up. Shouldn't feel any binding. Turn them a little at a time don't want it to go on cockeyed
And, don't roll that O-ring either. Just remember, plastic makes a terrible sound when it cracks.😮
What brand you buy it !
You don't have the link to search for the injectors?
Do you need a cameraman? ❤❤❤
Is a tune required after installation???
Nope just plug and play
Did you find the problem
مشاكلها طرنبه البنزيم لقد عانيت كثيرا تباً لها 😂
Link to injectors