I have a the same one and after about 10 minutes of running wide open while I’m blowing off equipment it all of the sudden just stops running I changed the thermostat and still does it there’s gotta be a safety overheat turn off on it somewhere or something else is going on can’t figure it out any ideas ?
Have you checked the oil, hydraulic oil levels. I had something similar but it was the battery. Cleaned the connections and after charging the battery it did it again and again. Replaced the battery and it’s never done it since. But again check items, on my video. Sometimes it’s just something so simple.👍🏽 Let me know what you find.🤔
Yes it works perfectly. Had no problems at all. I have even topped it up earlier this year. Oil is oil but different brand names. On the hydraulic tank it give 4 different makes they like you to use. 👍🏽
sir I have model airmen pds265s problems water temperatures on light to monitor, on key light water temperatures on readay engine run still have...so I tes open cek water pum conditions ok,and I cheng new tomostart only..and 1pcs sensor area tomostart cheng new still have problems...can give idea want problems 😀
Hi guys great video just what i was after, I know it’s a few years old but does anyone have any details of where I can can parts in the uk or France. Thanks
I’m sorry but I don’t. Even the company I mentioned on this video has gone out of business..😬 Try searching for compressor sales, and ask them. If they don’t have anything, do they know of another company..? Hope that helps. Let me know if you get someone.👍🏽 Best of British mate
Nice detailed video. Thank you. I have a question about a part that I am hoping you know the name of. It's a fuel actuator or something like that but I can't find it. At about the 34:12 you turn the camera. To the left of that bar about 1/4 way up from the bottom there's a green dot. It's the mechanism right above the green dot. Mine stopped working and I'm trying to find the part and was hoping you can help.
I know the company I had mentioned in the video is no longer. But if you try compressed system in Tampa Fl. 8006268177 they may have the part. Just to confirm is it the part with the cable? If so I believe that to be the stop system-emergency. Will send you a diagram 👍🏽
merci pour ton chaleureux commentaire. je ne sais pas si ma traduction est correcte? demandez-vous pourquoi j'utilise le compresseur? si tel est le cas, il est utilisé pour le sablage des pierres tombales. Merci beaucoup.
I have this same model compressor. The problem I am having is that when I put it to start position and start its fine then if I switch to run with the valves off and let pressure build it will blow pressure relief valve and spew oil and air all inside the compressor. My compressor was used for heavy construction had the balls ran off it and has 6000 hours and I come to find out the air/ oil separator has never been changed! I took it off and as soon as the last bolt was out it came loose and about half a gallon of oil came out of the housing it was beyond soaked! So I soaked the filter in a solvent bath for a couple hours now its drying going to re use filter until I can get a new one hopefully that was the problem. Cant see it being the pressure relief valve theres nothing to the thing.
@@wolfeman1966 I probably have one Id have to look in our office in its file. We bought this compressor new more than a decade ago and its been ran very hard. This morning I re installed the cleaned filter and still had the same issue. I noticed oil was backing up in the line that comes out of the bottom of the filter housing and returns any excess oil back into the oil reservoir. Inside that line the strainer had fallen out and was just inside the brass fitting not doing anything. I cleaned it and put it back in correct spot. I used our shop compressor to blow that line out and hook it back up and now she is running good and not blowing the pressure relief anymore. Hopefully that was the problem.
Rumah kubur Mari masuk Diesel SAE10W 30 engine oil -4*F-----86*f 1.3 Gallons 4.9 L Fill using dipstick “L” and “H” level Hydraulic oil.... Maker. HULS Mobil Texaco Brand Anderol 3032 Rarus sch 1024 Sun-StarDe32 3.7Gallons 14L
Sir I want model air men pds185s problem is I starting run engine after 5minit engine off and monitor see error cod engine oil pressure.. sir want problems sir..tq
Sorry i didn't read ur message correctly it wasn't a question it was a statement..😬 My bad. I wasn't trying to scrimp (save money) on this job I was just trying to do what I thought was the correct thing. I have noted this now and hope people will read these comments and learn.👍🏽
I am not implying you were being cheap on the oil. I take it you didn't know there is a difference, but the difference is huge. There is a reason they recommend the expensive stuff. Your compressor will thank you later when it doesn't wear out prematurely.
Yes it can ... but I put mine through a air pot which leads to my air hood. If you want it directly to the air hose then you will need the right connections.👍🏽
Not got there number tbh...are they still in business can’t get onto there web site .......had quote for one offf another company but they want about $550 for one
snoopdogg0007 looks like they have closed shop..😱 Had the sale reps number but it’s some one else’s phone number now..😞 Send me the number of the company u were buying it from and I’ll see if it cheaper buying it from the states.!!
Thanks for the offer ...I’ve managed to get hold of one from a gent in Cornwall ..dear but I could have in 4 days .......do appreciate the help with and the video which with out it I would of been up shit creak .... Cheers Keith
Great job on the vid and info. But to let you know, the AW46 you put in is the WRONG oil for that compressor. As you can see, the Texaco is DE32 32 is the weight, and 46 is too thick. And more importantly, plain AW hydraulic oil will not work properly in that screw compressor. You need to use one of the 3 recommended oils listed on the tag. None are cheap........the Mobil Rarus SHC 1024 is over $250 for 5 gallons. But using AW46 Hydraulic oil can cost you very expensive problems later on. The people you bought it from don't care........they will sell you another one when this one fails due to the wrong oil.
Great question. What I did notice was when I topped it up to the position required...I found that there must have been some still left in the system as once I started it up it would foam up inside the viewing tube. And a day of running it some of the oil found a way out the the little white filter about an 2" long. I spoke with the manufacturer of the oil and they said the oil is good for that unit and not to worry about the foaming as it was mixing with air and would sort it self out. One week later it was clear again. Still running good and no problems. Are u thinking me being in sunny Florida... it should have been thinner oil..? Not thicker..? Thank u for the question and hope that helped.
I have this same model compressor. The problem I am having is that when I put it to start position and start its fine then if I switch to run with the valves off and let pressure build it will blow pressure relief valve and spew oil and air all inside the compressor. My compressor was used for heavy construction had the balls ran off it and has 6000 hours and I come to find out the air/ oil separator has never been changed! I took it off and as soon as the last bolt was out it came loose and about half a gallon of oil came out of the housing it was beyond soaked! So I soaked the filter in a solvent bath for a couple hours now its drying going to re use filter until I can get a new one hopefully that was the problem. Cant see it being the pressure relief valve theres nothing to the thing.
7 years later and I'm very grateful for your tutorial. Thanks man 👍🏾
Thank you from across the pond!! Very helpful!
Glad to be of assistance 🇬🇧👍🏽
Okay , boujour mon collègue si ravie de l émission .Quand ce système a été mis en circulation et où on l utilisé.
hey man i just bought 3 of these lol. two need some work. have you ever had no start issues?? or running for like 1 minute then dying?
How much air compressor oil does the unit take?
I have a the same one and after about 10 minutes of running wide open while I’m blowing off equipment it all of the sudden just stops running I changed the thermostat and still does it there’s gotta be a safety overheat turn off on it somewhere or something else is going on can’t figure it out any ideas ?
Have you checked the oil, hydraulic oil levels.
I had something similar but it was the battery.
Cleaned the connections and after charging the battery it did it again and again.
Replaced the battery and it’s never done it since.
But again check items, on my video.
Sometimes it’s just something so simple.👍🏽
Let me know what you find.🤔
I have the 185 compressor and the safety switch popping off and hydraulic coming out any idea.?
How has it run since? You used hydrualic oil aw46 in place of air compressor oil- even though it's not the same, did it work?
Yes it works perfectly.
Had no problems at all.
I have even topped it up earlier this year.
Oil is oil but different brand names.
On the hydraulic tank it give 4 different makes they like you to use.
👍🏽
I know ,I'm fine I'm pleased u gave me ur thoughts to share.
I'm always learning😊👍🏽
J quwo,a see dad t Arsr,
I guess I'm quite off topic but does anyone know a good site to stream new tv shows online?
@Bishop Garrett i use Flixzone. You can find it by googling =)
@Bishop Garrett Try flixzone. You can find it by googling :)
@Bishop Garrett lately I have been using FlixZone. Just search on google for it =)
Great video......very helpfully , just bought the same model and having a few issue with it at mo ....
snoopdogg0007 glad it could help 👍🏽
sir I have model airmen pds265s
problems
water temperatures on light to monitor,
on key light water temperatures on readay engine run still have...so I tes open cek water pum conditions ok,and I cheng new tomostart only..and 1pcs sensor area tomostart cheng new still have problems...can give idea want problems 😀
Hi guys great video just what i was after, I know it’s a few years old but does anyone have any details of where I can can parts in the uk or France. Thanks
I’m sorry but I don’t.
Even the company I mentioned on this video has gone out of business..😬
Try searching for compressor sales, and ask them.
If they don’t have anything, do they know of another company..?
Hope that helps.
Let me know if you get someone.👍🏽
Best of British mate
Nice detailed video. Thank you. I have a question about a part that I am hoping you know the name of. It's a fuel actuator or something like that but I can't find it. At about the 34:12 you turn the camera. To the left of that bar about 1/4 way up from the bottom there's a green dot. It's the mechanism right above the green dot. Mine stopped working and I'm trying to find the part and was hoping you can help.
I know the company I had mentioned in the video is no longer.
But if you try compressed system in Tampa Fl. 8006268177 they may have the part.
Just to confirm is it the part with the cable?
If so I believe that to be the stop system-emergency.
Will send you a diagram 👍🏽
Can you send me your email?
@@wolfeman1966Thank you. jplduff@gmail.com
Great job! Your explanations are good and usefull.
Thank you 👍🏽
I try my best 😊
Bonjour mon collègue et ravie de votre émission.
Je voudrais savoir quand ce système est mis en circulation et où cela peut il servire
?
merci pour ton chaleureux commentaire.
je ne sais pas si ma traduction est correcte?
demandez-vous pourquoi j'utilise le compresseur?
si tel est le cas, il est utilisé pour le sablage des pierres tombales.
Merci beaucoup.
I have this same model compressor. The problem I am having is that when I put it to start position and start its fine then if I switch to run with the valves off and let pressure build it will blow pressure relief valve and spew oil and air all inside the compressor. My compressor was used for heavy construction had the balls ran off it and has 6000 hours and I come to find out the air/ oil separator has never been changed! I took it off and as soon as the last bolt was out it came loose and about half a gallon of oil came out of the housing it was beyond soaked! So I soaked the filter in a solvent bath for a couple hours now its drying going to re use filter until I can get a new one hopefully that was the problem. Cant see it being the pressure relief valve theres nothing to the thing.
TheCrustyFry I will look at that tomorrow and get back with you.
Do u have a manual with yours..?
@@wolfeman1966 I probably have one Id have to look in our office in its file. We bought this compressor new more than a decade ago and its been ran very hard. This morning I re installed the cleaned filter and still had the same issue. I noticed oil was backing up in the line that comes out of the bottom of the filter housing and returns any excess oil back into the oil reservoir. Inside that line the strainer had fallen out and was just inside the brass fitting not doing anything. I cleaned it and put it back in correct spot. I used our shop compressor to blow that line out and hook it back up and now she is running good and not blowing the pressure relief anymore. Hopefully that was the problem.
That’s fantastic... glad it worked 👍🏽
E.5 errors single. What is Problems.
What kind of motor do they have
Armando Moreno it’s a Nissan diesel engine
Hi comproser pds 390s for oil gear
How to cheng and what brand oil to put new ..
Rumah kubur Mari masuk
Engine oil or hydraulic oil?
@@wolfeman1966 for rotary gear oil..
And how liter want put..
Rumah kubur Mari masuk
Diesel SAE10W 30 engine oil
-4*F-----86*f
1.3 Gallons
4.9 L
Fill using dipstick “L” and “H” level
Hydraulic oil....
Maker.
HULS
Mobil
Texaco
Brand
Anderol 3032
Rarus sch 1024
Sun-StarDe32
3.7Gallons
14L
haidrulick 👍
I don’t know if it help but I get a lot of the filters from Napa for my PDS 135s!
Neil Nash that’s great to know... thanks for sharing 👍🏽
Hi Neil where about are Napa ? am in the uk and am after the oil separator filter
Sir I want model air men pds185s
problem is
I starting run engine after 5minit engine off and monitor see error cod engine oil pressure..
sir want problems sir..tq
engine oil have..
desil oil have
comproser oil have..
can have problems sir
Sorry i didn't read ur message correctly it wasn't a question it was a statement..😬
My bad.
I wasn't trying to scrimp (save money) on this job I was just trying to do what I thought was the correct thing.
I have noted this now and hope people will read these comments and learn.👍🏽
I am not implying you were being cheap on the oil. I take it you didn't know
there is a difference, but the difference is huge.
There is a reason they recommend the expensive stuff.
Your compressor will thank you later when it doesn't wear out prematurely.
Hi is the company that you got the filters from still trading ...I've sent them emails but not got a reply as of yet ...
Cheers Keith
snoopdogg0007 try contacting their field rep...
Bret +1 (818) 370-0015
Hope this helps
Jitendra rajbhar
All type compressor sells & service provides
Call 9561220176,7709134775
Can a air hose be connected to it so I can air up Tractor tires?
Yes it can ... but I put mine through a air pot which leads to my air hood.
If you want it directly to the air hose then you will need the right connections.👍🏽
Prese
thanks for yr lesson sir
Twazagye James your welcome.
I sometimes forget what I have to do so always go back to this video.👍🏽
pds185s problem
water temperatures have light
discharge temperature have light
After run engine 15-20minit
Am having a nightmare trying to get a new oil air seperator in the uk 😤
snoopdogg0007 have u contacted the company direct..?
If so what did they say...
Or have u not got their US number?
Not got there number tbh...are they still in business can’t get onto there web site .......had quote for one offf another company but they want about $550 for one
snoopdogg0007 😱 no.
Let me check with there field rep and get back to you👍🏽
snoopdogg0007 looks like they have closed shop..😱
Had the sale reps number but it’s some one else’s phone number now..😞
Send me the number of the company u were buying it from and I’ll see if it cheaper buying it from the states.!!
Thanks for the offer ...I’ve managed to get hold of one from a gent in Cornwall ..dear but I could have in 4 days .......do appreciate the help with and the video which with out it I would of been up shit creak ....
Cheers Keith
please give me AIRMAN PDS265S
Great job on the vid and info.
But to let you know, the AW46 you put in is the WRONG oil for that compressor.
As you can see, the Texaco is DE32 32 is the weight, and 46 is too thick.
And more importantly, plain AW hydraulic oil will not work properly in that screw compressor. You need to use one of the 3 recommended oils listed on the tag.
None are cheap........the Mobil Rarus SHC 1024 is over $250 for 5 gallons.
But using AW46 Hydraulic oil can cost you very expensive problems later on.
The people you bought it from don't care........they will sell you another one when
this one fails due to the wrong oil.
Great question.
What I did notice was when I topped it up to the position required...I found that there must have been some still left in the system as once I started it up it would foam up inside the viewing tube.
And a day of running it some of the oil found a way out the the little white filter about an 2" long.
I spoke with the manufacturer of the oil and they said the oil is good for that unit and not to worry about the foaming as it was mixing with air and would sort it self out.
One week later it was clear again.
Still running good and no problems.
Are u thinking me being in sunny Florida... it should have been thinner oil..?
Not thicker..?
Thank u for the question and hope that helped.
I have this same model compressor. The problem I am having is that when I put it to start position and start its fine then if I switch to run with the valves off and let pressure build it will blow pressure relief valve and spew oil and air all inside the compressor. My compressor was used for heavy construction had the balls ran off it and has 6000 hours and I come to find out the air/ oil separator has never been changed! I took it off and as soon as the last bolt was out it came loose and about half a gallon of oil came out of the housing it was beyond soaked! So I soaked the filter in a solvent bath for a couple hours now its drying going to re use filter until I can get a new one hopefully that was the problem. Cant see it being the pressure relief valve theres nothing to the thing.