@PokerFaZe- I have this same case and I tried to mount 2 slim 120mm fans to the top lid and the 2nd fan had to be removed because of the plug that goes into the PSU. How did you get yours to fit?
@@PokerFaZe 😮 Thank you so much. Going to try that out today. Running a 7600X3D, RX6750XT, Aorus B550i Pro AX, Seasonic SGX 750w PSU, Noctua NH-L9x65 cooler, 64 GB Corsair Veneance LPX, (1) 80mm Noctua, (1) 92 mm Noctua (4) 120 mm Noctua. I was originally going to run 6 because Cougars website said you could install up to (2) 120 mm fans at the bottom of the case……but they didn’t let you know that it’s only possible with a single slot card. When installed there was literally no space between the GPU and the bottom case fans. It might not have hurt anything because the GPU fans and case fans all spun without interference and it was blowing more air directly on the GPU….but I didn’t want to risk messing anything up.
Back then I installed two slim 120mm at the bottom with an Asus Strix 1080 Ti card. You can check my older videos about this case on the channel. Of course if you use thicker card, a front 80mm can still help
Hi, may i ask why did you remove the fan filter below the case? Plus, is it possible to add 120mm fan with 15mm height at the bottom case as air intake?
I replaced the feet because they limits the air intake of the GPU. With the new feet we can't use the filter anymore. If you watch my older vid with this case, I could use those slim 120mm fan for the GTX 1080 Ti, but I could not this time.
Really impressed with this build! What CPU cooler is that? Does it perform better and/or more silently that the water cooler you had before? Also, did the new feet gave a measurable temp difference?
Ferocious. Every QBX user should be deeply pleased. I am for shure !
Thanks for the video! Just got assured that cutting off that left bottom corner is the right direction to place my card inside…
the soundtrack is on point
Nice build love the soundtrack ;-)
Looks good. Maybe needs right angle or "U" adapters for your GPU power?
Temperatures are probably pretty good. Tons of airflow potential in that case.
The 90 degree adapter is not needed and I can close the panel just fine :D
Your psu is facing the inside of the case. Wrong direction. flip it around
That was a very relaxing video!
Music so good...
so the case had alot more room to fit that cooler in. case specs says 105mm that cpu cooler is 110mm
@PokerFaZe- I have this same case and I tried to mount 2 slim 120mm fans to the top lid and the 2nd fan had to be removed because of the plug that goes into the PSU. How did you get yours to fit?
I mounted full size 120mm, you need to turn the plug around
@@PokerFaZe 😮 Thank you so much. Going to try that out today. Running a 7600X3D, RX6750XT, Aorus B550i Pro AX, Seasonic SGX 750w PSU, Noctua NH-L9x65 cooler, 64 GB Corsair Veneance LPX, (1) 80mm Noctua, (1) 92 mm Noctua (4) 120 mm Noctua. I was originally going to run 6 because Cougars website said you could install up to (2) 120 mm fans at the bottom of the case……but they didn’t let you know that it’s only possible with a single slot card. When installed there was literally no space between the GPU and the bottom case fans. It might not have hurt anything because the GPU fans and case fans all spun without interference and it was blowing more air directly on the GPU….but I didn’t want to risk messing anything up.
Back then I installed two slim 120mm at the bottom with an Asus Strix 1080 Ti card. You can check my older videos about this case on the channel. Of course if you use thicker card, a front 80mm can still help
How did you fit a 3090 in that case? The Cougar QBX only has two GPU slots, while the 3090 had 3…
EDIT: Nvm only the founders edition only has 3 slots
The EVGA XC3 can fit even better :)
Like watching a bomb device being build in the church hall..
how tall is the m.2 heat sink at the back of the motherboard?
The one in the vid was very thicc so I had replaced it as it bent the M.2. I think perfect the thickness should be 2mm for M.2 and 1mm for thermal pad
Hi, may i ask why did you remove the fan filter below the case?
Plus, is it possible to add 120mm fan with 15mm height at the bottom case as air intake?
I replaced the feet because they limits the air intake of the GPU. With the new feet we can't use the filter anymore.
If you watch my older vid with this case, I could use those slim 120mm fan for the GTX 1080 Ti, but I could not this time.
Very good.
What is the name of the song?
thks
They are in the timestamps :)
Really impressed with this build! What CPU cooler is that? Does it perform better and/or more silently that the water cooler you had before?
Also, did the new feet gave a measurable temp difference?
Hi where did you get the 3rd fan clip for the cpu cooler?
I emailed Noctua, they sent two for free.
Really fck NiCE! From Spain
Love the music
Psu corsair sf 750 is compatible with QBX case?
On official website qbx is not compatible format ac input sf750.
Yes
ko hiểu j hết nhưng cho 10 điểm đẹp :)))
🐶
May I ask if the CPU heatsink fans are 120mm?
Hi, they are 92mm.
@@PokerFaZe Thank you bro. You think the FUMA 2 from SCYTHE can fit in this case?
I don't know, but you can compare the cooler's height with the Cryorig H7, which can fit in this case.
@@PokerFaZe Oh nice! Do you have any pics of that cooler inside the case?
Sorry, I don't have it, but there are many people on SFFPC sub-reddit using the Cryorig H7 in this case and it fits.
a lot of rgb and his is thinks its god-mode )) i like QBX cuz it more classical without any modern rgb shit with glasses.
The religious bullshit music killed it for me, great build though.