This is the video that made me contact you in the first place, sir. I never thought you would agree to make my two sabers for the amount of money you were given. So glad you did. Two years later and I still love what you have made for me. Beautiful work. Amazing personality and drive. I still can’t believe you are not famous for this kind of thing. As always, MTFBWY!
JH Statts Hey Master Statts!! So good to read from you and also read that the Force is still very strong in your Sabers after two years!! Glad you are well and safe my Friend
This is The Best Crystal Chamber Review I’ve Seen There Fantastic Man I Really Dig your Spinning Chamber Build your Working On Defanatly would like to Have one My Friend ✨💯✨
Many Thanks Again Space!! Hit me up on ETSY and we can construct a Starkiller to your liking whenever you're ready>> Would be great to have a chat about some CFLS details
Stunning work....I love my saber collection but always envy people who can DIY...I'm starting to dabble...then I see this & realise how little artistic talent I have...haha Good thing I have ur Etsy shop bookmarked...lol
The first one is actually parts from inside a hard drive the ones that are internal it’s the part that spins the discs I found in my research people often use them to make crystals chambers
You and I are in the same track I was thinking same on the glow in the dark cooling after glow and yes blue but you will like idea on crystal n sound font
Awesome video! I was wondering if you cut down your crystals or machine them after you get them. I'm looking to start my own crystal chamber and I've got a few ideas kicking around.
Shawn O'Hara most of the time I just use the correct length of hardware to fit a Crystal but you can shave them down with a pair of wire cutters and a hand sander for smoothing the rough end>> Good Luck and MTFBWY>>
Amazing work, just one question the swich and LED can you point me in the direction so I can get some it is not for a lightsaber, thank you, keep up the awesome work
Is there a chance you'll give us a list of your most commonly-reused components for these things? Like, the various screws, bolts, nuts, gears, spacers, etc?
Rather than have the Crystal LEDs being powered by separate watch batteries why not have them being driven by the same circuitry that drives the blade LEDs? That way you can more easily simulate the power running from the power cell into the blade...
You should try shooting a laser pen in a piece of hazy quartz crystal and see how crazy that looks..red or green laser. If you could find a compact laser to use in lieu of lights..the display would look even more dazzling, especially if a spinning crystal...
I go by Tom Solo if you ever care to tip your hat to me in a future build video. Glad you understood the idea, the guys at korbanth told me they’d need to see me pull it off to understand it. They will get it when they see you build it:)
Thomas Miller you got it Tom Solo>> Will give you credit for sure>> I was thinking about your idea and I wonder if you shot two different color lasers (red & green) into each side of the rotating crystal would the colors mix in the middle and cause it to shoot out two different yellowish colors due to the different facets of the Crystal itself~~~ Might be a pretty amazing effect as well!! Thanks again Master Tom!!
I ordered the graflex 3.0 reveal..if you have success in making this work, I’d like to commission you to fit mine with one if it is doable and you are game.
Thomas Miller Congratulations, that is one beautiful Lightsaber...I’m booked solid through 2018 but when you get it in your hands let me know if there’s any room for any additions since the way I understand the 3.0 is it’s already full of nice Crystal Chamber stuff?
Zeaiclies...If the Prizm 5.1 has 6 dedicated soldering pads for powering the original type of 6 segmented scrolling led string blades like the extremely rare Crystal Focus LS then this is very new news to me? Please send a link of this documentation with the page number so I can read through it... I have an uninstalled Prizm 5.1 here and have read the updates section but have not found anything yet. Thank You>> And MTFBWY>>
can this work on crimson dawn replica sabers?? i just ordered a graflex from them always wanting a chamber but there 900-2000 for a saber with a crystal chamber.
I don’t fully understand. Say I create a saber from UltraSabers. Could you build a crystal chamber in order to fit somehow? Or do have to literally make everything from scratch?
Basically if your Saber has a Chassis system that uses threaded rods similar to the MHS system developed by TCSS then these types of Crystal Chambers can be adapted to fit in any hilt.
The LEDs are a combination of very small .5mm RGBW diodes mixed with found parts for the housings and have to be assembled under jewelers goggles Surely my eyes and hands will suffer the abuse over time......
Additionally, a lot of museums and planetariums will have things where you can fill a small bag with similar looking stones for two or three dollars, I picked up about 20 crystals that look just like that one from my local planetarium for two dollars.
Have you thought about selling kits with the materials people can use to make their own crystal chambers? I know a lot of people have a hard time finding the components and I think it would be a great way for more people to customize their sabers.
Katie Keagy I have however back when I was building allot of Crystal Chambers I could barely keep up with the demand and I’ve discovered I really enjoy completing fully custom Saber builds the most.
I haven't constructed a cross guard Saber that is for sale yet however, my personal Kylo is my test prototype for Bluetooth transmitting sound>> Videos coming soon>
I'm in Atlanta and have been searching for a hardware store that has weird parts but no luck yet. Love San Diego! Used to live out in OB. I've been experimenting with making radiator fins from washers, but I really just want cool little brass spacers...
Most US have to be completely emptied and then reworked with a new Chassis to accommodate a Crystal Chamber so it can be done depending on the remaining space left inside the hilt after the internal redesign.
Bear Brown We have a Facebook page where you can view all of our work and request a custom order based on our many photo examples>> m.facebook.com/MasterMaltais/
Can you make me a lightsaber? Maybe interchangeable green and purple light. Something not too big in the handle and a decent length blade that is removable? That is durable for light combat and has sound? I have cash and can pay thru pp.
Hello, Andy my Name. Can you build me a illuminated crystal chamber for my OWK4 AnH from The Pach Store ? I will pay you a lot of money. I don't get a chamber anywhere.
When he said "hello there" in the beginning of the video I was replying very loud with "General Kenobi ! "
This is the video that made me contact you in the first place, sir. I never thought you would agree to make my two sabers for the amount of money you were given. So glad you did. Two years later and I still love what you have made for me. Beautiful work. Amazing personality and drive. I still can’t believe you are not famous for this kind of thing. As always, MTFBWY!
JH Statts
Hey Master Statts!! So good to read from you and also read that the Force is still very strong in your Sabers after two years!!
Glad you are well and safe my Friend
This is the video that made me want to contact you in the first place. I saw these and was blown away by the detail. Still am!
Million Thanks Master Statts!! I glad you did contact me since both of your Sabers are my new favorites on my list of accomplishments
I'm not trying to sound corny man but dude you guys are literally bringing dreams to life.
Thank you for your service mate. Marine here.
Yes indeed thank you 🙏 wholeheartedly 4your service
Great video. Beautiful work very creative and well executed. Thanks for posting. May the force be with you always.
that last one is amazing. i just got a metal lathe and will definitely be trying some stuff like this. just gorgeous bud, very very well done.
That marble style crystal set up is beautiful
0:02
Jediarms dealer: hello there
Me: general kenobi
So Rad! Helluva job I love it
GENERAL KENOBI YOU ARE A BOLD ONE
I make Lightsabers and im only 16 im working on getting better at making them. And I think this is absolutly awsome.
This is The Best Crystal Chamber Review I’ve Seen There Fantastic Man I Really Dig your Spinning Chamber Build your Working On Defanatly would like to Have one My Friend ✨💯✨
Very creative. Great work!
Great craftsmanship!
Awsome craftsmanship.
Love the custom blade plug!
Amazing work 👍
Nice builds
Wonderful video. Amazing progress on these. The Starkiller's CC: me want!!!
Many Thanks Again Space!! Hit me up on ETSY and we can construct a Starkiller to your liking whenever you're ready>> Would be great to have a chat about some CFLS details
Hey man would you be willing to sell one of the crystal blade plugs??
Sure no problem...I'll upload it to ETSY today>
Groovy stuff. Good work.
These look amazing.
Absolute work of art so want one
Stunning work....I love my saber collection but always envy people who can DIY...I'm starting to dabble...then I see this & realise how little artistic talent I have...haha
Good thing I have ur Etsy shop bookmarked...lol
beautiful just... beautiful
wow that looks amazin sause!!!
I love all of those
My only recommendation for learning Lightsaber building skills is to keep watching LOTS of Saber build videos>>>
Many Thanks for the Compliments!!
Holy shit those are amazing.
I need to get me one of these
The first one is actually parts from inside a hard drive the ones that are internal it’s the part that spins the discs I found in my research people often use them to make crystals chambers
hello there. 😂 I am now subcribing just because of that love it and the video
Talent
I just ran into this clip. MAN THAT IS AWESOME!!!! Do you sell these lightsabers? Where can I buy them? I want one!!!!! Great work!!! Amazing!
You and I are in the same track I was thinking same on the glow in the dark cooling after glow and yes blue but you will like idea on crystal n sound font
Do you still sell the blade plug chambers on eBay? I just bought 2 but they don’t look as intricate as these. I would like to upgrade at some point.
Awesome video! I was wondering if you cut down your crystals or machine them after you get them. I'm looking to start my own crystal chamber and I've got a few ideas kicking around.
Shawn O'Hara most of the time I just use the correct length of hardware to fit a Crystal but you can shave them down with a pair of wire cutters and a hand sander for smoothing the rough end>> Good Luck and MTFBWY>>
Amazing work, just one question the swich and LED can you point me in the direction so I can get some it is not for a lightsaber, thank you, keep up the awesome work
Is there a chance you'll give us a list of your most commonly-reused components for these things? Like, the various screws, bolts, nuts, gears, spacers, etc?
Will you do videos on how to make the parts you build and supplies
That's so awesome!!!!! I never got to see the inside of a lightsaber (not like this)
Where can I get a small single LED like you have on the first crystal chamber you showed?
Rather than have the Crystal LEDs being powered by separate watch batteries why not have them being driven by the same circuitry that drives the blade LEDs? That way you can more easily simulate the power running from the power cell into the blade...
Watch the other videos...
Which ones?
Here I am again Dave. Lol
Haha!! So happy you are continuing to enjoy one of my favorites as well buddy!! See you Munday>>
You should try shooting a laser pen in a piece of hazy quartz crystal and see how crazy that looks..red or green laser. If you could find a compact laser to use in lieu of lights..the display would look even more dazzling, especially if a spinning crystal...
That’s actually a really great idea and yes I will try that on a future build for sure!! Thank You and MTFBWY>>Always...
I go by Tom Solo if you ever care to tip your hat to me in a future build video.
Glad you understood the idea, the guys at korbanth told me they’d need to see me pull it off to understand it. They will get it when they see you build it:)
Thomas Miller you got it Tom Solo>> Will give you credit for sure>> I was thinking about your idea and I wonder if you shot two different color lasers (red & green) into each side of the rotating crystal would the colors mix in the middle and cause it to shoot out two different yellowish colors due to the different facets of the Crystal itself~~~ Might be a pretty amazing effect as well!! Thanks again Master Tom!!
I ordered the graflex 3.0 reveal..if you have success in making this work, I’d like to commission you to fit mine with one if it is doable and you are game.
Thomas Miller Congratulations, that is one beautiful Lightsaber...I’m booked solid through 2018 but when you get it in your hands let me know if there’s any room for any additions since the way I understand the 3.0 is it’s already full of nice Crystal Chamber stuff?
How did you make/where did you buy those small self contained LEDs you showed at 9:36? There are so many uses for those that I can think of.
I used to get them from an LED company in China but sadly I can’t find them anymore :((
JediArmsDealer
Dang, do you know what I would look up to find something similar? I looked a bit on Amazon but I couldn’t find anything.
Where did you get the twist LED from? This is is amazing!!
I used to get them from China but can’t find them anymore :((
Do any of these fit inside/work with Custom Saber Shop’s modular hilt system parts?
The Plecter Labs Prizim 5.1 supports all three LED blade set up.
Zeaiclies...If the Prizm 5.1 has 6 dedicated soldering pads for powering the original type of 6 segmented scrolling led string blades like the extremely rare Crystal Focus LS then this is very new news to me? Please send a link of this documentation with the page number so I can read through it...
I have an uninstalled Prizm 5.1 here and have read the updates section but have not found anything yet.
Thank You>> And MTFBWY>>
굿!
What do you use for spacers in between the radiator fins?
Some are hand cut hollow tubes and some are machined threaded spacers made in copper, brass and aluminum.
can this work on crimson dawn replica sabers?? i just ordered a graflex from them always wanting a chamber but there 900-2000 for a saber with a crystal chamber.
I don’t fully understand. Say I create a saber from UltraSabers. Could you build a crystal chamber in order to fit somehow? Or do have to literally make everything from scratch?
Basically if your Saber has a Chassis system that uses threaded rods similar to the MHS system developed by TCSS then these types of Crystal Chambers can be adapted to fit in any hilt.
are the crystals screwed in the chamber or how did they stay in place?
This is stuff that custom prop shops can't make this is stuff that Lucas film could not do this is stuff that Disney absolutely won't do
where do you get all these metal parts? rods and plates and threaded pieces??!?!?!?! please
I take LOTS of electronic things apart and put the parts in stacks of bins at my Outpost
What LEDS do you use? Love your work!
The LEDs are a combination of very small .5mm RGBW diodes mixed with found parts for the housings and have to be assembled under jewelers goggles Surely my eyes and hands will suffer the abuse over time......
JediArmsDealer Ah thank you, but what about the turning wheels to turn on the LEDs? :)
Just curious, why was the led for the deep purple one so much brighter than the other LEDS?
Because white LEDs are always the brightest in the color spectrum and tend to wash out the camera much more than colored LEDs.
JediArmsDealer thanks
Where do you get those crystals, im doing a short film and I need one as a prop.
Ebay sells a ton of Quartz Crystals in all types and sizes
Additionally, a lot of museums and planetariums will have things where you can fill a small bag with similar looking stones for two or three dollars, I picked up about 20 crystals that look just like that one from my local planetarium for two dollars.
President wants one I told him about ya.
Where do you buy the LEDs to light up the Crystals?
Can’t find them any more :((
So what do I do for my project?!?! 😢
Do you happen to still have a link to those leds?
Have you thought about selling kits with the materials people can use to make their own crystal chambers? I know a lot of people have a hard time finding the components and I think it would be a great way for more people to customize their sabers.
Katie Keagy I have however back when I was building allot of Crystal Chambers I could barely keep up with the demand and I’ve discovered I really enjoy completing fully custom Saber builds the most.
@@jediarmsdealer5994 that's fair. So I ordered another saber from saber forge and placed all my orders for the electronics with some extras.
Katie Keagy Which sound card did you go with?
@@jediarmsdealer5994 for one I'm going with a NBv4 and the other a crystal focus v9
Katie Keagy That should cover it Well Done!!
So what are the things you turn that house the LED and batteries called?
Custom LEDs that I can’t find anymore :((
Where do you get tubes and rods that skinny?
Hobby stores and make the parts on a mini lathe
Do you also do cross guard saber chambers? If you do, could I possibly buy one?
I haven't constructed a cross guard Saber that is for sale yet however, my personal Kylo is my test prototype for Bluetooth transmitting sound>>
Videos coming soon>
JediArmsDealer Oh ok
If you send the exact dimensions on ETSY and the look you would like, anything is possible
JediArmsDealer Alright, I'll be sure to check it out.
Is it possible to install one of those crystal Chambers into my ultrasabers prophecy v3?
Darth Saber Possibly depending on how the Chassis is made inside your Saber and how much room you have left for a Crystal Chamber
I own a ultrasabers prophecy v3 so idk
I want you to build my junkyard saber
How much do you charge for custom builds?
You can PM our Outpost on the JediArmsDealer Facebook page for a quote>> Thank You!! And MTFBWY>> Always...
The 5 people who thumbed down this plz explain why?
How would I go about ordering a crystal chamber from you?
You can place a custom order on ETSY.com
www.etsy.com/shop/JediArmsDealer
JediArmsDealer c
.
Where are you sourcing all your parts?
We have a local shop here in San Diego called Marshall’s Hardware and I make allot of them from scratch.
I'm in Atlanta and have been searching for a hardware store that has weird parts but no luck yet. Love San Diego! Used to live out in OB.
I've been experimenting with making radiator fins from washers, but I really just want cool little brass spacers...
Do You Do Ultrasaber?
Most US have to be completely emptied and then reworked with a new Chassis to accommodate a Crystal Chamber so it can be done depending on the remaining space left inside the hilt after the internal redesign.
do u sell any of these products?
Do you still make these
And I’m thinking you could use thin fiber optic sand outside and run some pieces too
09:56 where i can buy it?
Do you have a website?
Bear Brown We have a Facebook page where you can view all of our work and request a custom order based on our many photo examples>>
m.facebook.com/MasterMaltais/
Do you sell them?
Where do they sell these answer answer!!!!
it says in the title dumb fuck
Can you make me a lightsaber? Maybe interchangeable green and purple light. Something not too big in the handle and a decent length blade that is removable? That is durable for light combat and has sound? I have cash and can pay thru pp.
sol-der-ing
Cool video. I might have some spare "greeblies" you could mess around with, if you're interested. Message me, if you're interested.
Oh schmeckt lecker!
Thank's for that heart
@@JamesG.Griffin Do you have a website where you sell your crystal chambers???
Hello?Can you answer my question please?
Darth Saber All questions answered
Hello, Andy my Name. Can you build me a illuminated crystal chamber for my OWK4 AnH from The Pach Store ? I will pay you a lot of money. I don't get a chamber anywhere.