JC Aixun iHeater Sandwich Splitter Review - What Temperature To Use For iphone X, 12PM, 13PM
HTML-код
- Опубликовано: 2 окт 2024
- JC Aixun iHeater Reseller - China Phonefix Team - A professional phone repair tools and accessories supplier: www.diyfixtool...
JC Aixun iHeater Link : www.diyfixtool...
In this video, I test this iHeater against 3 sandwich boards:
⭐iPhone XS
⭐iPhone 12 Pro Max
⭐iPhone 13 Pro Max
For the iPhone XS, I found that 180C was way too hot. Basically, it destroyed the board. Probably should be around 120C on this unit.
For 12 Pro Max, 180C was still too hot. It created a lot of solder balls & was able to split at around 160C.
And for 13 Pro Max, it seems like 150C was the sweet spot.
So if you're going to be using this tool, make sure to test it first before trying it customer's boards, otherwise, you'll end up floating the whole board & find solder balls everywhere.
Also, I found the 12 and 13 series heat plates do not support the 5G antenna we have here in the USA, so this won't be practical to use for me.
I do hope China starts considering USA boards, with the 5G antenna, with their future tool designs.
Let me know if you have any questions about this Aixun iHeater down below in the comments!
🚨 Support the channel by checking out these links🚨
🏆Become a member of my new Private Community of VIP Techs: vccboardrepair...
👨🎓 Want to join our 90-Day Microsoldering Mentorship Program? Click here: vccboardrepair...
🔥 Full list of tools I recommend: www.vccboardre...
🚨 Do you need your iPhone or iPad repaired? Send me a message for a quote: www.vccboardre...
►Check out my new T-Shirts, Hoodies & more: merch.vccboard...
►Amazon Storefront: www.amazon.com...
►Join the new Facebook Group for Repair Techs vccboardrepair...
🛒Buy The Seek Stand by VCC Board Repairs here: vccboardrepair...
🕶 Buy Macro Lens here: www.vccboardre...
📸Buy The Seek Compact Pro here: amzn.to/34I4whX
🚀Today's shirt can be purchased here: merch.vccboard...
► Like us on Facebook: / vccboardrepairs
► Follow us on Instagram: / vcc_board_repairs
⚠ B2B & Wholesale pricing for mail in repairs is available for repair shops in the USA. Contact us for more information: www.vccboardre...
Please note: This page contains affiliate links. If you choose to make a purchase after clicking a link, I may receive a commission at no additional cost to you. Thank you for your support!
JC Aixun iHeater Reseller - China Phonefix Team - A professional phone repair tools and accessories supplier: www.vipfixphone.com/
JC Aixun iHeater Link : bit.ly/3QBcwDu - use Coupon Code "VCCBR" for a discount.
is it calibrated out of the box?
@@fastfixiphonerepairla Nope. What you saw in my video, is how it performed out of the box.
Hi, what you could have done is to use thermal camera to see reall temperature. This device can cause some damage if you trust the temperature you set on it.
that would have been a good idea
Hi, which temp is best for 11pro? Thanks)
yOU GUY ARE EXCELLENT DOING THIS JOB ASLO SHARE THIER KNOWLEDGE . I AM NOT A KIND OF PROFESSIONAL BUT STILL I LOVE REPAIRING AND WATCHING THESE KIND OF VEDIOS , "VCC Board Repairs - Jesse Cruz" & , "NorthridgeFix" ONE OF MY THE MOST PROFESSIONAL PERSONS AT ENTIRE RUclips . LOVE FROM PAKISTAN STAY BLESSED
Appreciate your support!
What do you suggest for Samsung sandwich boards?
Not sure. There's no heater for samsung boards unfortunately. I usually just use hot air or the "flat" plate on other heaters.
I assume this heater has not calibrated temperature sensor, so it overheats boards. I doubt 180C can destroy X board, more likely the temperature was higher. Anyway, I would avoid using such heater. Thanks for the video though!
Yeah it definitely wasn't calibrated. Not sure how to calibrate it either.
Thanks again brotha for keeping us up to date on tooling, I replaced my old hakko with the tb3 because of the suggestions you made and am very happy with it ! I work on everything but you have been my Iphone go to mentor for a while now and im very greatfull, Thank you :)
Right on! love it!
what digital heater do you recommend for USA market? Also thanks for sharing these videos.
I use the X360 V2: www.injuredgadgets.com/xinzhizao-x360-intelligent-temperature-control-preheating-platform-positioning-separation-for-iphone-x-to-13-pro-max/?acc=3d2d53e5abcd70e24cc444935b88e6ac21
Yes sir that’s one of the best tools I had ever bought from sunshine tools ! Less then 20sec and the boards are spilt quick ??
That's great!
120 V or 220 V model, if you have the wrong device then that could be a problem
That's not it. The box says 110V and the unit itself says it supports 110v/220v
JC AIXUN iHeater motherboard preheating separation desoldering tool. Intelligent temperature control. Protect the motherboard.
May be you get a heater has something wrong, because i use it at 170 and 180 and there is no solder balls, no issues.
I can say that for the specific heater you get because it's package has a sticker printed on it (110V), BTW I'm from a country which uses (220V).
yeah i think the temperature is off a bit
@@VCCBoardRepairs Can it be calibrated ?
Jesse using to high temperature bend the board, iPhone X till 11 pro use 148 grades on the mid layers, for the ic and interposer down use 225 ( sac-305), for iPhone 12 up the solder is 210 and the hold board except for the interposer down that use 225(sac-305), in my case I put like 158 and then use the heating gun I use that technique in 12 models up. My prefer one is the mechanic ix10. I’m thinking buy the new mechanic model for 13
yeah but even at 150C, that was hot enough to melt the 12 and 13 models, it seems like.
@@VCCBoardRepairs no because use 210 in mid layer, I use preheater at ~150 celcius and use the heat gun with 375-50 with the quick 861.
great video . will see if we can modify the plate for the 5g antenna , thank you as always
I hope they release new plates that support 5G antennas. Then I will definitely use it.
Do you already try the D-heater pro from
DUY?
No, never tried it. but i just googled it & found a video. I don't like that you have to screw in the plates. that's really inconvenient
Been thinking of getting this for a while now, thanks for doing a video on this. Great watch jesse
Just be careful with the temps! lol
Thanks bro. Very helpful video. I had an offer to buy this heater.
You are amazing bro nice suggestions for beginners love from india
Ah man. After I bought one already.
Never mind, looks like the one I got is better still : )
Haha. I am still going to use my X360 V2 for now.
For 13 i use 230c but can’t splits it.
maybe it's defective
Those all in one heaters suck. Stick with Mechanic for each model.
i love my mechanic heaters!
What’s the exact mechanic model do you like?
Hi Mr Jess thanks from Nigeria, how can apply for online course to gain more knowledge about iPhone mother board repair...
great to hear that!
Hi jc I would love you to review the irepair ms1 board separating too temperature on iPhone 12pro max to 13 or 14
I don't like it. It's too tall for me
Sir please reply. WL and AIXUN best leyer remove ?
i2c t20 heater
@@VCCBoardRepairsdo you prefer the i2c over the X360 v2?
I do vccbr.com/heater
As always, enjoying watchin your pure videos 👍. Bro i have question, after separating iPhone sandwich boards, the AP board get bended a litlle bit, i use 170c and separate gentle WO force, any idea why its happening ?
Not sure why it would warp. Maybe your heater is running hotter than it supposed to?
@@VCCBoardRepairs So you think its due temp? Ok, will do with lower temp and see what will happen...
I think I'm going to Dremel a slot for the antenna...
Let me know how that goes!
@@VCCBoardRepairs I tried that and it doesn't turn on that well. Just remove the antenna.
how you deal with bent upper board after separating
that usually means you used too much heat. but look up the iAtlas from Qianli. It can maybe help.
@@VCCBoardRepairs i order that :)
so what kind of iheater better white that one?
Is the mechanix board really the best?
Not anymore
@@VCCBoardRepairswhich one in your opinion is the best, now?
180 is the good for x xs 11
Not in my case lol
Perfect and very good video
Thank you so much 😀
weldone jesse,nice video.
Glad you enjoyed it
Good job boss very helpful
Glad to hear that
Has anyone tried the I2C T20 AI Desoldering Station?
I use it everyday
Video coming Thursday 🙌
@@VCCBoardRepairs great, thanks.
thanks again sir need more
Need more what?
@@VCCBoardRepairs we need more review it help me alot...and tnx again🙏