Ways to fix the BONNET LOCK - Peugeot 307
HTML-код
- Опубликовано: 11 июл 2024
- Video showing how the bonnet lock works and few ways to fix it - example made for Peugeot 307 SW (2005).
LINK: (Removing & Reinstalling Front Bumper - Peugeot 307)
• Removing & Reinstallin...
Hope it helps. Авто/Мото
The video is old and continues to help! I already knew how the mechanism worked, but when I saw what I could see from the outside of the engine's front grille, it was easier to imagine pulling it out with a hook. And it worked, congratulations on the video and thank you!
You are worth your weight in Gold , just bought a 206cc and the bonnet would lock properly , I dropped the bonnet as state and locked instantly thanks a million for this video .
Thanks so much for this. Got close to breaking a window in desperation when the battery went flat and was central locked. I managed to get into the car bonnet first time thanks to your tutorial.
very informative 👍
Love your videos, they are so good! Thank you! /Ove, Stockholm
Thanks Ove!
I appreciate the feedback a lot!!!! :)
Cheers
hi thank you so much for the vedu
Hi Zead,
You are very welcome! :)
Hi, I have 407coupe and 2 times The workshop broke the bonnet release. They said the bonnet is heavey and bonnet release is from weak plastic. Do you have another solution ? Or there is a strong one.
I cant lock my c2 bonnet can the big spring at the end be cut?
and what if line is snapped and i have no way to get under the hood?
hi have you ever ran cabels through the firewall of the car I would love a video showing how to do that.
Hi Martin,
I have not done that yet but I will add your request to the list :) There needs to be the first time for everything ;)
Cheers!
My car will not close, only grab the safety lock.
Could I adjust the lock up to get it to grab the bonnet bracket?
Hi thank you for this video but can toi show us how to remplace the câble of the bonnet lock please
Hi Ryadh,
The cable is connected to the bonet lock and the lever you use to open the bonnet. All that remains is to find the clips holding the cable to the car along the cable lenght.
I will add your request to the video list for future ;)
Cheers
Hi, Thank so much i bought a full set of the câble and lever i'll install it later best regards
Is it possible to remove/install bonnet lock without taking the bumper off?
Hi Vykintas,
I believe so. Nonetheless, it takes some agility and hand bending. You can remove 4 pins and two side screws with star interface. I do it at the beginning of this video: ruclips.net/video/nrG68DjnZ9w/видео.html&lc=UgzoJLVOhivfv6cnGcN4AaABAg
Then you should be able to bend the bumper a bit. Just be careful not to pull to strong. This is plastic in the end :)
Cheers and good luck!
Thank you a lot! Will try this :)
How can i open my bonnet from outside, battery is outside and key is not opening.pls little help
Could you open the bonnet? I am exactly in the same situation! Thx
Réparation capot moteur
Чё он решит