Please post an additional video on how to get smartport set up or update manual to include it as well as crossfire etc. It would be very beneficial to your customers.
Great tut! Actually it is all clear even with no subtitles. Thanks guys for clarifying this Mavlink thing. It was perhaps the most mysterious thing to set up on this AAT; some users said they did it, some tried all possible ways, and still failed. Hope, with this tutorial everyone can do it quick and easy.
This is great. I appreciate the video. Since the documentation is a bit "slim" this video truly provides a clear picture of the process. Do you have any additional tutorials on getting the TeleflyTiny OSD to communicate with the Crossbow mini? I've been having an extremely difficult time. Specifically, I am receiving Dlink and GPS signals perfectly with just the flight controller OSD showing (FPV camera not turned on). However, the moment I turn on my FPV camera (I've tried two different RunCams) I lose Dlink and GPS sats immediately. Is there something special with the FPV camera wiring I should be doing? Do you have a setup video for this I can see the wiring? Thanks in advance.
@@jimmytheriot8978 sounds like you got it separated for the initial startup. If the baudrate is correct and the SIYI is sending out Mavlink packets, it should work. If it's reading 100% I am thinking the baudrate is good. But double check what the baudrate SIYI communicates at.
@@rockfordmckay9365 baudrate are both 57600 ,I'm get gps info like lat and longitude but if I scroll down to home position on the tracker info there's nothing, should it be reading something for home position?
Please post an additional video on how to get smartport set up or update manual to include it as well as crossfire etc. It would be very beneficial to your customers.
please I want to know if the nice tracker is compatible with all Autopilots and how it receive the commands to follow the drone i.e. from ground control station I really want some body to help to understand principles of operation as I want to buy one...Regards
how many mah can the 5v output on the left port deliver? because i want to use a BT Module to share mavlink telemetry from my crossfire AND the external GPS for getting the Tracking Position but I actually need to power those 2. So I thought about powering BT Module and GPS from the same 5V Output in parralel
Bro..I try connect gps to the left port but never made it. Not working. On my tracker, on left port there is no option for protocol ext GPS. Only local GPS and Drone GPS. Which one do I must select?
Is there a way to feed CRSF data into it instead of MAVLink? Then I can use my existing ExpressLRS telemetry instead of having to put a second data link.
All i get is "Dlink:messages". Im using a wifi module with a jumper T16. Ive tried walking away with the armed plane lifting it up over my head as told to do but it stays on dlink:messages?. Please help been working on this for a week now. 😢😢😢
Thanks for the tutorial! I'm trying to get the mini AAT to communicate via MAVLink Wifi without a FC. I'm getting a "DLINKmsg?" Why? What am I missing?
I need a very long range rc transmitter. At least 100km with 18 channel. What do you recommend? Does this tracker will help me to use and control my plane by rc transmitter or it just work on autopilot
Although I have followed all the suggestions I am unable to connect my AAT with OpenHD via mavlink. Do you have any more suggestions besides those I found in the manual and in the video?
Hi, been loving your videos on Crossbow Mini, can I ask your advice please? I'm fitting a TBS Yagi FPV 2G4 and a TBS Crossfire 868Mhz Yagi, do I need to have a specific clearance distance between these two antennas on the mount or does it not matter? Thank You :-)
@@exoops Hi, I've done some basic communicating test which all worked OK. Not yet used it on a real long flight. weather in UK is pretty crap at the moment
@@stevietee10 Looks promising; I just finished the set up of the tracker and both yagi are waiting to be attached to. Will be trying this set up asap once yagi mount is printed out.
I just received mine and had it set up within the day. I tested it the following day and was running fine for and hour the next time I turned on after changing batteries the tracker went from its normal horizontal position and suddenly pointed to face straight up and track in the opposite direction. I have checked the manual but I could not find any answer. Do you have any ideas what could have happened. I have had my original AAT for 5 years and it never had a problem like it. Please help.
Is their anyway to test from Tracker whether your Local GPS connected Directly to it on Right port is working properly..? I have solid Blue Light on GPS and red flashing
How are you friend; I use a Taranis X9D Plus with L9R Receiver and Fy-41AP Lite controller, use 5.8 and also 1.2 ghz, what will I need to use this antenna on my FPV system? Is it ready to use?
Great to see the new boards that way it is easier to access all ports. Unfortunately I would prefer to use the vbi link as it should be much longer link than my telemetry and also work with the older mfd aat. It seems it is very sensitive to the wiring someone mentioned it's the connectors. I can have 100% vlink and move the wires around some and the link will drop to zero. I have started a flight with tracking and had it drop out during the flight. Some have reported that it doesn't work with certain cameras. Do you have any advice on that. The ultimate solution for vbi is if you would help Ardupilot and iNav embed the needed telemetry without the telefly tiny.
I've had the same issues on my end. I'm using the TeleFly Tiny OSD with the MiniCrossbow and all works fine. However, the moment I turn on my camera (runcam Swift 3 and runcam 2 mobius type) I lose Dlink and gps sats immediately. If I only have the osd from my flight controller it works fine. Have you seen any solutions to this yet?
I use a Fy-41-AP Lite and would like to buy such a tracker, but I have some doubts: 1 - What will I need to use this tracker with my Fy-41AP? 2 - Will I need to have another GPS connected to Telefly? 3 - Will I be able to use with 5.8 ghz and 1.2 ghz systems?
I am having trouble getting the mini aat working with my crossfire tango 2 and iNav sending mavlink over wifi to a esp15. I get DLink:MSG? on the aat. I read in the manual this means MAVLINK_MSG_ID_GPS_RAW_INT and MAVLINK_MSG_ID_GLOBAL_POSITION_INT are likely missing and to check if they are there. I have no idea how to check that they are there coming from iNav or what to do if they are missing. Some help would really be appreciated. Thanks.
Using a Telemetry RX/TX (433 MHz) on top of the Tracker, as it is usual for a ArduPilot System, we miss SlipRings to feed the AAT Signal down from the receiver unit turning on Top to the AAT Basic, e.g. the Connectors. Or using a SIYI MH30 which can transmit the Commands to the air unit, also. See here: ruclips.net/video/G2j1gCAj6lM/видео.html He must take the cables throu th air down. Will make a lot of troubles when rotating more than 360 degrees.
Please post an additional video on how to get smartport set up or update manual to include it as well as crossfire etc. It would be very beneficial to your customers.
Is there a way to send telemetry data ( smartport) from the transmitter to the tracker using bluetooth. I think that's the easiest solution .
Great tut!
Actually it is all clear even with no subtitles. Thanks guys for clarifying this Mavlink thing. It was perhaps the most mysterious thing to set up on this AAT; some users said they did it, some tried all possible ways, and still failed. Hope, with this tutorial everyone can do it quick and easy.
This is great. I appreciate the video. Since the documentation is a bit "slim" this video truly provides a clear picture of the process. Do you have any additional tutorials on getting the TeleflyTiny OSD to communicate with the Crossbow mini? I've been having an extremely difficult time. Specifically, I am receiving Dlink and GPS signals perfectly with just the flight controller OSD showing (FPV camera not turned on). However, the moment I turn on my FPV camera (I've tried two different RunCams) I lose Dlink and GPS sats immediately. Is there something special with the FPV camera wiring I should be doing? Do you have a setup video for this I can see the wiring? Thanks in advance.
Thanks for posting. I have Mavlink up and running now. I have also added a HC-05 module for Bluetooth. You have an amazing product here!
I have this to and I'm getting 100% dlink with mavlink with the siyi hm30 hd system but it will not track ,any idea what I'm doing wrong
@@jimmytheriot8978 Have you separated the plane and tracker 10M (100 feet) to initiate the startup? ( That got me at first)
@@rockfordmckay9365 I just set it up and flew the plane thinking it would track
@@jimmytheriot8978 sounds like you got it separated for the initial startup. If the baudrate is correct and the SIYI is sending out Mavlink packets, it should work. If it's reading 100% I am thinking the baudrate is good. But double check what the baudrate SIYI communicates at.
@@rockfordmckay9365 baudrate are both 57600 ,I'm get gps info like lat and longitude but if I scroll down to home position on the tracker info there's nothing, should it be reading something for home position?
Please make the video explaining the smart port set up!
Please post an additional video on how to get smartport set up or update manual to include it as well as crossfire etc. It would be very beneficial to your customers.
please I want to know if the nice tracker is compatible with all Autopilots and how it receive the commands to follow the drone i.e. from ground control station I really want some body to help to understand principles of operation as I want to buy one...Regards
how many mah can the 5v output on the left port deliver? because i want to use a BT Module to share mavlink telemetry from my crossfire AND the external GPS for getting the Tracking Position but I actually need to power those 2.
So I thought about powering BT Module and GPS from the same 5V Output in parralel
Good afternoon! Are you transmitting the mavlink from the flight controller ? but it must be in the sky... How do I transfer it from crossfire TX ?
This is what I wanna know
Full sized CRossfire module to Mini Crossbow by either having a HC-05 Blutooth module attached to Crossbow of MFD WiFi module attached to the Crossbow
Thanks guys for posting this video.
Bro..I try connect gps to the left port but never made it. Not working. On my tracker, on left port there is no option for protocol ext GPS. Only local GPS and Drone GPS. Which one do I must select?
Is there a way to feed CRSF data into it instead of MAVLink? Then I can use my existing ExpressLRS telemetry instead of having to put a second data link.
Is this project still being developed? it looks so cool
All i get is "Dlink:messages". Im using a wifi module with a jumper T16. Ive tried walking away with the armed plane lifting it up over my head as told to do but it stays on dlink:messages?.
Please help been working on this for a week now. 😢😢😢
nice clarification Charles. Much better idea to breakout the L & R ports to save on micro soldering :)
We understand that soldering those tiny pins is painful... This new ExtBoard will make things much easier.
MyFlyDream what type of sockets are used on the breakout board? I’d like to get some pigtails for Bluetooth & GPS.
Will this work with a pixhawk cube or matek 765 wing autopilot?
Thanks for the tutorial! I'm trying to get the mini AAT to communicate via MAVLink Wifi without a FC. I'm getting a "DLINKmsg?" Why? What am I missing?
thank for this vid !!!
I need a very long range rc transmitter. At least 100km with 18 channel. What do you recommend? Does this tracker will help me to use and control my plane by rc transmitter or it just work on autopilot
I have a question, does the crossbow need a gps fix position? or can I move it while my aircraft is still in the air? will it sustain the tracking?
Although I have followed all the suggestions I am unable to connect my AAT with OpenHD via mavlink. Do you have any more suggestions besides those I found in the manual and in the video?
Hi, been loving your videos on Crossbow Mini, can I ask your advice please? I'm fitting a TBS Yagi FPV 2G4 and a TBS Crossfire 868Mhz Yagi, do I need to have a specific clearance distance between these two antennas on the mount or does it not matter? Thank You :-)
hello, did you try it? does it work? I am looking for the same set up
@@exoops Hi, I've done some basic communicating test which all worked OK. Not yet used it on a real long flight. weather in UK is pretty crap at the moment
@@stevietee10 Looks promising; I just finished the set up of the tracker and both yagi are waiting to be attached to. Will be trying this set up asap once yagi mount is printed out.
I just received mine and had it set up within the day. I tested it the following day and was running fine for and hour the next time I turned on after changing batteries the tracker went from its normal horizontal position and suddenly pointed to face straight up and track in the opposite direction. I have checked the manual but I could not find any answer. Do you have any ideas what could have happened. I have had my original AAT for 5 years and it never had a problem like it. Please help.
Is their anyway to test from Tracker whether your Local GPS connected Directly to it on Right port is working properly..? I have solid Blue Light on GPS and red flashing
How are you friend;
I use a Taranis X9D Plus with L9R Receiver and Fy-41AP Lite controller, use 5.8 and also 1.2 ghz, what will I need to use this antenna on my FPV system?
Is it ready to use?
Hi I am having problems with a new crossbow i purchased, does Mfd have a support team that can help. Cheers
Great to see the new boards that way it is easier to access all ports. Unfortunately I would prefer to use the vbi link as it should be much longer link than my telemetry and also work with the older mfd aat. It seems it is very sensitive to the wiring someone mentioned it's the connectors. I can have 100% vlink and move the wires around some and the link will drop to zero. I have started a flight with tracking and had it drop out during the flight. Some have reported that it doesn't work with certain cameras. Do you have any advice on that.
The ultimate solution for vbi is if you would help Ardupilot and iNav embed the needed telemetry without the telefly tiny.
I've had the same issues on my end. I'm using the TeleFly Tiny OSD with the MiniCrossbow and all works fine. However, the moment I turn on my camera (runcam Swift 3 and runcam 2 mobius type) I lose Dlink and gps sats immediately. If I only have the osd from my flight controller it works fine. Have you seen any solutions to this yet?
What gps puck is that?
I use a Fy-41-AP Lite and would like to buy such a tracker, but I have some doubts:
1 - What will I need to use this tracker with my Fy-41AP?
2 - Will I need to have another GPS connected to Telefly?
3 - Will I be able to use with 5.8 ghz and 1.2 ghz systems?
You need to use the TinyTelefly module with and extra gps
Will it work with old mfd aat? I mean v5.
Can Mavlink work on MyFlyDream AAT Version 5 driver ???
Is this possible on the old 12 ch tracker?
Great !!!!
I like, i buy !!!
I am having trouble getting the mini aat working with my crossfire tango 2 and iNav sending mavlink over wifi to a esp15. I get DLink:MSG? on the aat. I read in the manual this means MAVLINK_MSG_ID_GPS_RAW_INT
and MAVLINK_MSG_ID_GLOBAL_POSITION_INT are likely missing and to check if they are there. I have no idea how to check that they are there coming from iNav or what to do if they are missing. Some help would really be appreciated. Thanks.
Did you ever get this working?
@@thomasgreenhill4901 yes, iNav 3.0.1 crossfire 6.13 and WiFi 2.04 works just fine
@@JoshFisk could you make a video on how to
You can build your own tracker for way less. Dont understand why they are charging $300 for these. Wow
When will the new firmware be available to download , thanks
V2.0 Firmware for mini Crossbow available now on www.MyFlyDream.com :)
Hello, I have a f35 furiuos fpv controller and I was thinking of buying a traquer antenna, how could I connect it to your traquer antenna?
Hi, The BLE port will give you the telemetry signals you need.
Look on thingyverse for 3d mounts for antennas
Unable to understand what its all about😅
Using a Telemetry RX/TX (433 MHz) on top of the Tracker, as it is usual for a ArduPilot System, we miss SlipRings to feed the AAT Signal down from the receiver unit turning on Top to the AAT Basic, e.g. the Connectors. Or using a SIYI MH30 which can transmit the Commands to the air unit, also. See here: ruclips.net/video/G2j1gCAj6lM/видео.html
He must take the cables throu th air down. Will make a lot of troubles when rotating more than 360 degrees.
Hi. super.
This doesn't work with TBS crossfire bluetooth or wifi telemetry on Crossfire full TX period. I've all but given up and sold my tracker. Useless
I definitely does
果子出了新飞控吗？
Yes.. MFD Crosshair AP