Thank you so much for this video! The only thing that I wish you would have covered is how you glued the lenses back in place. Since they are lenses, I assume that if you put glue in the wrong place, you will affect the light dispersion. Any tips would be appreciated.
Your assumption is spot on. Imprecise gluing does affect light dispersion. Please watch the companion video titled "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" at: ruclips.net/video/xaaGEDHwwAg/видео.html for examples of what can happen and additional gluing tips. Thank you for commenting!
Both plasma and OLED screens are self illuminating. Unlike LCD screens they do NOT require backlights, so if you have a true OLED TV, then you should NOT have this problem. You may experience similar symptoms, but loose diffuser lenses will not be the cause of it. Good luck! Thanks for commenting.
I've started to notice the same on my TCL QLED. It's a very faint spot in the lower left section of the screen but barely noticeable unless you focus on that area for a while. Should I just leave it be? Is it going to get worse? It's barely noticeable unless I stop to look at it for a few seconds. What happens if you don't glue back the reflector lens?
Thanks! This was brilliant. My son-in-law was going to throw away his 50" Samsung for two bright spots. He got a new TV under a 5 year warrantee plan. I fixed his old one for $8.00 in epoxy glue, and now I have a beautiful TV!
Thank you for this video! I managed to fix the bright spots in the living room TV with my dad with the guide you made. Everything worked out splendidly and we saved some money too
Thank you Lawrence! These instructions along with your companion video were easy to follow and did the trick! Saved me a few hundred dollars for sure! Just like you said, not only did I have a diffuser loose but several others were about to go and I was able to fix them all at once. Thanks again!
Before you do, please watch ruclips.net/video/xaaGEDHwwAg/видео.html LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen for additional gluing tips. Good luck! Thanks for commenting. Please repost when you're finished. Let everyone know how you made out.
Thank-you. This was very helpful. I had one white spot, found the initial loose lens, then found 4 more that wiggled loose. All glued up with and will be putting screen back together today as I let the glue completely dry overnight. Take your time when you do this. I snapped the outer most trim piece taking it off, but it was an easy fix gluing it together. Saved me a couple thousand dollars as I was contemplating getting a new 75" tv!
great video!!i am glad my problem is fixable.i am afraid of doing it by myself,but i will find someone that can help me.i have only one white spot.thank you so much!!!
Thanks for sharing this! Our tv had several light spots and we were able to fix it after watching your video. I used gorilla glue to glue the lenses back in place.
@5:14, what's the name of the tinted panel/film that you are removing here? The reason why I ask is on my Samsung TV I have a 2x5mm hole/chip in the film so that area is constant bright white. Though small its quite noticeable - Is there a way to improve the display. Ie, buy a small sheet of this film materials and 'patch' the area? Or do i need to replace the entire component?
The sheet I'm lifting at 5:14 is the LCD (liquid crystal display). Be very careful trying to patch it. LCDs are very fragile, easily cracked, and while they can be replaced, they're just not available. Try not to press very hard. If you crack the LCD, the screen will fill with colored lines ruclips.net/video/cOU5RVsFt70/видео.html and the TV will be scrap. I'm not sure how someone would fix the problem you describe. Even if you filled the hole with a tiny bit of dark caulking, wouldn't it then show up as a dark spot on a light background? Please repost after the repair to let others know what you used and how it worked out. I know I'm curious... Good luck! Thanks for commenting.
Thank you for this video. Following your instructions I have managed to cure the white spots on my screen. Sadly (not due to your instructions) I seem to have caused another problem despite being as careful as I can. Time for a new TV but I think I'll be looking for one with a different method of manufacture than the flimsy LED lenses.
Hi Lawrence i enjoyed your video and i have a couple of questions. First off i have a 5 yr old Samsung un50js7000 50" Flat screen and for about 2months I've had 2 white blotches at about 10 o'clock and 2nd at 2o'clock positions. Yesterday a 3rd blotch showed up at around the 12 o'clock position and i called Samsung and they went thru the settings remotely and they reset the tv to its original position when i bought it but the blotches were still showing up. I can't afford a new tv right at this moment so i'm inclined to take it apart and hope the diffusers have dropped out of position so my question for you is what type of glue did you use to put your diffusers back into place? Thank you for your time, Harry
How absurd of Samsung to do that. They know what's going on! Typical of how things are today. Deny, deny, deny, repeat anything but the truth. Countless Samsung TVs have this problem. Just read the comments! I've personally fixed dozens of Samsung TVs with this problem! The 5-Minute epoxy I use is sold at Harbor Freight. Before you take apart your TV, please watch ruclips.net/video/xaaGEDHwwAg/видео.html "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" for additional info and some very important gluing tips. Many people have been kind enough to come back and comment that they successfully repaired their TVs (or TVs that were given to them) after watching these two episodes, so chances are very high that you will be successful as well. Good luck. Thanks for commenting. Please like and subscribe as it really helps the channel.
@@LawrencePina Hi Lawrence thanks for the info on where you purchased the Epoxy Glue/Harbor Freight is a great place to get items that you won't find anywhere else. Also i did Subscribe to your great channel!!
@@LawrencePina Hi again i have been shopping around for the LG Nano75 series with AI. Also my sister has had an LG for over 10 yrs. and she couldn't believe my Samsung which cost me $700.00 just 5 yrs. ago is pretty much junk now. My question to you is "What do you think about the LG Nano75 series 50" tv? I like the fact that it has AI and a "Magic" remote that is like a mouse, and has more than 750 channels built in unlike Cable channels? Thank you, Lawrence, i appreciate Ya and i will watch the other video you have before i take apart my Samsung. Hopefully with your instruction i can fix it and use it in my bedroom. Thank again my friend!!!
@@techFPV5964 I've no experience with LG Nano75 series but for what it's worth, older LG and Samsung TVs often used similarly manufactured display panel assemblies which failed exactly the same way. Are things any different, now? I doubt it. Regarding the 750 built-in channels those are mostly Pluto.TV channels (which you can view for free, right now, on your phone or computer) and possibly some IP TV channels. You can add them to any TV (even old, so-called dumb TVs) with an Android TV box, an Amazon FireTV stick, a Roku stick, etc. In my opinion, that's a much better ay to add them. Hope this helps. Thanks again for commenting.
This was great! Couldn’t get the glue recommended and bought Locktight, this didn’t work, cleaned the lens’s and applied Gorilla Glue and this worked better. It’s just took a really long time for the glue to set.
Thank you very much! The repair has completely eliminated the white spots. Unfortunately, the right corner of the screen is slightly broken, but that hardly bothers me during use.
Just a thought - if you're using a TV box, try pulling in the horizontal and vertical display settings. If the defect at the right corner is tiny, that will put it in a black border, where it will be unlit and less noticeable. Changing resolutions on the TV might hide it too. Hope this helps. Thanks for commenting.
Generally, the smooth side of the thickest, lowest layer, faces the layer above it and the grainy or rough side faces the LEDs. The other layers generally go together like this: Vizio Model M422i-B1 display panel disassembly notes (4 layers under the LCD): 0) LCD (the top layer) 1) Thin, frosted diffuser. Frosted side facing viewer. Shiny side facing LEDs. 2) Thin, silver-color reflector. Grainy side facing viewer. Smooth side facing LEDs. 3) Clearer, thin, silver-color reflector. Grainy side facing viewer. Smooth side facing LEDs. 4) Thick, white-color, hard plastic sheet. Smooth side facing viewer. Grainy side facing LEDs. Note that this is the reverse of how the other layers are oriented. Hope this helps. Thanks for asking! Please like and subscribe as it really helps the channel.
Will this work on Samsung in my case a un65h6350afxza I only have 2 diffuser sheets the thick one smooth on one side and a thin sheet with a mirror like finish on one side
Hi. I can't remember which way the thick diffuser goes. Shiny side down to LEDs or shiny up? I'm talking about the panel that sits above the lenses. Not the flimsy foil looking ones. Thanks
Generally, the smooth side of the thickest, lowest layer, faces the layer above it and the grainy or rough side faces the LEDs. The other layers generally go together like this: Vizio Model M422i-B1 display panel disassembly notes (4 layers under the LCD): 0) LCD (the top layer) 1) Thin, frosted diffuser. Frosted side facing viewer. Shiny side facing LEDs. 2) Thin, silver-color reflector. Grainy side facing viewer. Smooth side facing LEDs. 3) Clearer, thin, silver-color reflector. Grainy side facing viewer. Smooth side facing LEDs. 4) Thick, white-color, hard plastic sheet. Smooth side facing viewer. Grainy side facing LEDs. Note that this is the reverse of how the other layers are oriented. Hope this helps. Thanks for asking! Please like and subscribe as it really helps the channel.
www.harborfreight.com/super-strong-quick-drying-epoxy-92665.html Thanks for asking! Also recommend watching "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" at ruclips.net/video/xaaGEDHwwAg/видео.html for more info and carefully reading through other people's comments (especially those pertaining to alternate glues) on both videos. Good luck! Please like and subscribe as it really helps the channel.
Just finished doing our smart TV. You done a great job doing it. Thank you for sharing your experience doing it. Took us quite a while, but was worth it. Better than to pay over £250 to get this sorted. We had 2 lenses fall of and another 2 were lose. We had no problems after we finished, like nothing has happened. So thank you 😊 great video. Oh and the dark spots you got after are just dirt and dust particles, I had those on my laptop after I fixed my Ram. So I ask what it was at a repair centre and been told that this often happens when you repair a TV or computer, because it takes easy dust particles on the screen, so best deal it to wipe it with antistatic cloth before putting together, it should be fine after. 👍
Thanks for this feed. I had to fix 4 reflectors and put the whole thing back together. The white circles were gone, great thanks to your help in this video. After a week or 2, on the right side corner a pink spot appeared with an triangle shape of 3 cm horizontal lenght, 3 cm vertical; in addition The entire screen got a bit more pink-ish. Question is where this comes from; any relation with the repair of the reflectors, or the effect of opening the flat screen and removing the panels? What to do?
I don't see how regluing diffuser caps could have caused these symptoms, especially weeks after the fact. It's more likely that the LEDs have started to change color and that the one in the corner is the most affected. For an idea of what might be going on, please watch ruclips.net/video/8g3uQaNK0Jo/видео.html "LCD/LED TV Repair Secrets - Dark Blue Picture." What to do? You may be able to restore neutral tint by adjusting picture settings. Otherwise, if the symptoms continue to worsen, consider replacing the LED strips. Lots of good info in the blue-tint video. Hope it helps. Good luck and thanks for commenting!
@@LawrencePina thanks for the swift reaction, I am going to watch the video and try to adjust the screen settings. Is this the correct order for the 3 diffuser panels: Lowest is the stiff one with the rough side facing the reflectors, then above the stiff panel, the flexible panel with the shiny side facing the stiff panel.
@@LawrencePina after I fixed the reflectors and put the thing back together, the TV screen when bright white and so, I see the position in circles of the reflectors sitting, not the white spots. As per beloofd question what is the correct position of the stiff white reflectorpanel (rough side below); or could it be that due to handling the TV set the thin carton sheet around the LEDs is not in the correct position, having shifted a bit? Thans for the reply :)
In my experience, every display panel assembly is different. I've seen as few as two and as many as four layers. In all cases the thick, white plastic sheet is on the bottom. Having made the mistake of NOT paying attention to the order of assembly the first time I fixed a TV with this problem, I'm now very careful to keep the sheets in exact order as I remove them. For what it's worth, here are some (top to bottom) assembly notes I made on a (3-layer) Vizio Model D40-D1 TV: TOP 0) LCD (3 layers under the LCD) 1) Thin, frosted diffuser. Frosted side facing viewer. Smooth side facing LEDs. 2) Thin, silver-color reflector. Rough side facing viewer. Smooth side facing LEDs. 3) Thick, white-color plastic sheet. Smooth side facing viewer. Rough side facing LEDs. Note that this is the reverse of how the other two layers are oriented. BOTTOM And here are some (top to bottom) assembly notes I made on a (4-layer) Vizio Model M422i-B1 TV. 0) LCD (4 layers under the LCD) 1) Thin, frosted diffuser. Frosted side facing viewer. Shiny side facing LEDs. 2) Thin, silver-color reflector. Grainy side facing viewer. Smooth side facing LEDs. 3) Clearer, thin, silver-color reflector. Grainy side facing viewer. Smooth side facing LEDs. 4) Thick, white-color, hard plastic sheet. Smooth side facing viewer. Grainy side facing LEDs. Note that this is the reverse of how the other three layers are oriented. Remember every TV is different. My initial mistake was on an Insignia 42" model. When the sheets were reassembled in the incorrect order the result was a very strange looking picture, one that was difficult to watch unless the viewer was directly in front of the TV. Good luck and thanks for commenting!
Regarding the halos you're observing around the affected LEDs, best seen on a bright white screen, that's a gluing problem. Light is escaping from under the caps. Please watch Part 2, "Evenly Spaced Spots on the Screen" ruclips.net/video/xaaGEDHwwAg/видео.html for important gluing tips. I deliberately made several mistakes there to illustrate such problems. They're easily corrected, but you will have to take the TV apart again...
hello. nice video. i wanted to ask if there is any way of reducing flashlight effect (backlight bleeding from al of the corners on samsung tv) that i can try out? i've read that loosing a few screws a bit could help, but not sure if there are any on my ru8000 (model which has a screwless back cover).
Light escaping from the edges and/or corners of the display is generally caused by misalignment of the diffusing and polarizing sheets located directly below the LCD. The display panel may have been taken apart and reassembled incorrectly (plastic retaining frames not snapped all the way in) or one or more of the flexible sheets may have shrunk and warped due to overheating. If that's the case, then without replacement sheets, there's really no fix for it. For additional info, please watch "LCD/LED TV Repair Secrets - Half of the Display is Barely Visible" at ruclips.net/video/raicZqT-qVo/видео.html That Samsung TV also has a screwless back cover and what happened to it may reveal what's going on with yours. Good luck. Thanks for asking!
Awesome video that helped me take apart and replace over 50 diffusers that fell off or would have fallen off using 5 minute epoxy. To my dismay, my rework was approximately 90% effective. Once I reassembled and tested the 50 inch Samsung, there were 5 bright spots in various positions on the screen. I tested the LEDs before reassembly, but did not notice the 5 diffusers that were not sitting flush with the LED circuit board. Can you recommend a test? Turn off the lights in the room after powering up the TV to view the brightness of the LEDs? Again, thanks for the video and I will be taking my Samsung apart again to rework the 5 diffusers.😃😃😃😃
For info on how to check for mistakes before reassembly, please watch ruclips.net/video/xaaGEDHwwAg/видео.html "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" starting from 18 minutes, 44 seconds. Lot's of gluing tips in that video as well. Hope this helps. Thanks for commenting!
@@LawrencePina I found it helpful to test after putting the plastic screens back and applying power to the LEDs, but before the LCD screen. I found one diffuser that still required rework. 50 inch Samsung now working great!
hello and thanks for the video. I have 5 year old 50inch Samsung LED tv. About a month ago I started to see pinkish blurry spot in one area of the screen. Googled it only to find out that I have to bin my telly and get a new one. in a meantime, the pink is gone and in the very same area, a white spot just like on the video appeared instead of it. I would be extremely happy if I have the very same issue you're dealing with in the video. is there any other way (besides shaking the TV and wait for rattle sound) to find out if I have the loose diffuser lens issue? I would like to know your opinion before I open the TV. many thanks for your help. pictures below if that helps.EDIT/UPDATE: I shifted the tv from side to side and the lens does slide on the bottom....so yeah, it is this issue!
Each lens cap is held in place by three little posts and as the first one detaches from its post hole, colored light escapes causing the symptoms you describe. Once the cap detaches completely, you get a bright spot. And, once it starts, it just gets worse, meaning that upon disassembly, you're likely to find a surprising number of loose lens caps. Please watch the companion video titled " LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" ruclips.net/video/xaaGEDHwwAg/видео.html for confirmation. Good luck and thanks for commenting!
@@LawrencePina I've done it! obviously together with a friend of mine...I was not able to manipulate with such a big TV by myself. but wow, if it was not because of you, I would most likely buy a new tv. MASSIVE THANKS!
So what glue did you use how much and does where you put the glue matter? Quite a bit of detail left out and mentioned late. Still fantastic but skipping the glue process all together is a bad idea
To prevent this in future. Shut off your TV/Screen when not in use or when you can. Heat from the LED is what causes the Lens to separate from the LED in time.
There aren't any consumer electronics repair shops where I live, so I can't really say. I'm sure it's different in Asia, India, and other parts of the world, but here in the US, when something breaks, it's pretty much repair-it-yourself or throw it away and buy another one. Me? I think it's broken anyway, and it's going to get worse, so why not give it a try? Good luck! Thanks for commenting.
Because at the time, I wanted to show what was causing the problem and I didn't think people would need gluing instructions. Obviously, I was wrong, so I linked a second video titled "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" and you can watch it here: ruclips.net/video/xaaGEDHwwAg/видео.html Good luck! Thanks for commenting. Please like and subscribe as it really helps the channel.
Hi i have similar problem with samsung qled q70r which is ou of warranty. But i wonder how to open this "bezel-less" front display/glass ? do you have any idea ? Thanks.
I've had very good luck with Harbor Freight 5-Minute Epoxy (product shown about 8 minutes and 30 seconds into the video). It's strong enough to keep the caps from falling off again but weak enough so that you can easily twist them off in case you need to. If you're going to attempt this procedure, please watch the companion video "LCD/LED TV Repair Secrets - Evenly Spaced spots on the Screen" for important gluing tips. Good luck and thanks for commenting!
Got brand new 85 inch sony bravia from best buy , Guess what ,got same bright spots on bottom , got it replaced with another brand new one same bright spots., replaced with another one same problem , replaced another one same bright spots , now m tired of replacing TV,s . But can't get rid of these bright spots.Could you imagine quality control of Sony , How can they pass all TVs with same problem. I can't even think of opening and repair it , coz it's brand new TV.Was thinking if there is any setting or software update etc could fix this problem.
It's best to have the unit powered on, so you can look directly down at the light to make sure the lens is perfectly centered. You want to block as much forward light as possible while looking straight on, like an eclipse. I used a clear 2 part resin that had a cure time of 5 minutes. I made multiple small batches, applied with a tooth pick. This held very well. Watch the screen ribbon cables, I started to assemble the front bezel upside down and ruined the screen.
We just repaired like 20 reflectors. Couldn''t believe how many were loose. It is so much better but still see some faint white circles. We might have put too much glue on them. So I'd say don't over do it on the glue application. But definitely worth the attempt.
Also I probably didn't place them all with the post holes perfectly lined up so light escapes from under them! Place them perfectly in place is important.
Would super glue work to glue these back on? It isn't as viscous as 5 min epoxy and the post holes would be easier to apply a drop and align the lens properly. Thanks.
Superglues haven't worked very well for me, at least not for this purpose, nevertheless many people choose to use them. Please read through the comments both here, and under companion video ruclips.net/video/xaaGEDHwwAg/видео.html titled "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" to see how that worked out for them. Good luck! Thanks for commenting.
I use this Harbor Freight glue: www.harborfreight.com/super-strong-quick-drying-epoxy-92665.html It's strong enough to keep the lenses from falling off again, but not so strong that you can't twist them off in case you ever need to replace an LED. Before you start the repair, please watch "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" ruclips.net/video/xaaGEDHwwAg/видео.html for additional instructions and very important gluing tips. Good luck. Thanks for asking!
www.harborfreight.com/super-strong-quick-drying-epoxy-92665.html and please watch Part 2, "Evenly Spaced Spots on the Screen" ruclips.net/video/xaaGEDHwwAg/видео.html for important gluing tips. Thanks for asking!
We really cant catch a break with these LED TVs, I've got this issue on a small 32" 2018 screen, but I had to do a much more difficult repair on a 60" that had the bad filter coating on the LEDs themselves, causing them to put out a very harsh purple light. Had to replace the entire grid, but thankfully the replacement was not that expensive.
Agreed. Dark blue/dark purple display caused by LEDs losing their filter coating is the latest (pre-planned?) failure: ruclips.net/video/8g3uQaNK0Jo/видео.html Congrats on fixing your 60". Welcome to the club and thanks for commenting!
This is a very common LG problem, most likely caused by shorted LEDs in the display panel assembly. Watch these two videos in the order given for detailed repair info: LG 42LN5700 - 47LN5400 LED TV Screen Repair Secrets ruclips.net/video/mW0OAYIRdqc/видео.html LG 50UH5500 UHD Smart TV Repair Secrets ruclips.net/video/I4m8IuQqN28/видео.html Good luck. Thanks for asking!
Unfortunately, I do not. Having made that mistake once, I'm very careful now to keep the sheets together. All I know is that the thick, white plastic sheet always goes on the bottom. The thinner sheets lay on top of that. Then comes the LCD support/frame followed by the LCD, followed by a metal frame (if present) followed by the front cover/bezel. Sorry for the delay in getting back to you. This question must have been sent to Giorgi Otiashvili who is at the top of this thread. It not forwarded to my email and I just saw it!
Did this! Found one off and 6 that were loose. Glued, cured and reassembled. Now have a dark blue screen with white blotches on the screen with streaks and a little color showing through. Reopened the back to make sure all connections were correct, reassembled and no change. Don’t know what to do now and any suggestions would be greatly appreciated. Samsung 2015 UHD Smart TV model JU6700F - 65” Curved TV.
Sorry to be the bearer of bad news, but those symptoms indicate a cracked LCD. If it's any consolation, no doctor can cure every patient. No matter how much experience you have, no matter how careful you are, you can't win them all. But, we can learn from our failures. I learned that the largest LCD size that I can handle comfortably, all by myself, is 50". With any size larger than that, I'll ask someone to help me and use a stretcher made from two lengths of 1" x 2" lumber (1/2" to 3/4" pipe also works) covered with foam pipe insulation. Even then, handling 65" size is scary. Please don't let this failure discourage you. I give you great credit just for trying. The local transfer station will be loaded with similar size TVs, which locals can generally take for free (provided you ask nicely), and if defeat doesn't set well with you, you can try again. Sooner or later, you'll have successfully repaired so many TVs you won't know what to do with them.
Please watch the companion video titled "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" at: ruclips.net/video/xaaGEDHwwAg/видео.html for additional gluing tips. Thank you for commenting!
i have also a problem of lighting on a 22" computer monitor also samsung , i did not try to shake it yet , but i have white clouds on the upper part may be its the same problem...thanks for this nice video.
I have a Vizio TV doing the same thing. It’s about 7 years old and has two bright spots. I may just follow these instructions instead of buying a new TV.
Great video and spot on with all the info. I would add just to be EXTREMELY careful when removing the glass screen. My curved Samsung cracked almost immediately upon lifting it off of the unit.
If it's any consolation, I've also been there, done that. You DO have to be extremely careful. The TV in the video was only 40" diagonal. That size is relatively easy for one person to handle. But, as you caution, when lifting anything much over 50", it's best to use two people and a makeshift stretcher. Two strips of 1" x 2" furring covered with foam pipe insulation work well. Two lengths of foam-covered PVC pipe can also be used. When all is said and done, though, no doctor can cure every patient. At least you tried, and it will go better next time. Good luck and thanks for commenting!
I have my TV apart now. 65” Samsung. 112 total diffusers and 9 that are loose. I need some help. Thought I could just use like super glue to reattach these, but that’s not working. What bonding agent should be used? 🤨
I use Harbor Freight "Super strong quick setting epoxy" aka 5 minute epoxy. It's strong enough to hold the caps down, but not so strong that you can't twist them off again should you ever need to replace the LED. For additional, very important gluing tips, please watch ruclips.net/video/xaaGEDHwwAg/видео.html the companion video "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen." Good luck. Thanks for commenting!
@@LawrencePina - Awesome! Thanks for the tip. We did windup trying my daughter's (2nd grade project - LOL) hot glue gun. Which seems to have worked for the purpose at hand. Still haven't put it all back together and tested it yet, so fingers crossed. :D
This just happened on my Samsung 6 series UN55KU6290F TV in the upper left corner,mfg,July,2016. How difficult a fix is it on this model and could something like Gorilla super glue be used?
All of the 2016 era 55" Samsung TVs that have come my way (including the 2016 Samsung UN55JS7000 we fixed 3-4 years ago, kept, and watch almost every night) have had heat related problems in the top four rows of LEDS. Typically: "The TV turns on but the top of display is noticeably dark, as if the upper row(s) of LEDs is/are not lit. After a while, the LEDs may turn on all by themselves and the display will be evenly lit, except for the extreme upper left corner, which always remains dark." I suspect your TV is starting to have similar problems. The only way to know for sure is to take it apart to examine the LED strips. In addition to the unlit section in the upper left corner, you're likely to find other LEDs in the top four rows that are dim or unlit, as well as noticeably burned areas on either the left or right halves of upper strips. In that case, you might be able to make one good strip from two bad ones, by swapping halves. What about the damaged strips? In most cases, brand new, aftermarket, replacement LED strips are available on aliexpress.com, at very reasonable prices. Carefully note the part numbers stamped on the strips that have failed. Order replacement strips from vendors listing brand new, aftermarket stock. Stay away from remanufactured OEM strips. Try NOT to order new OEM strips. Also, if you want to receive aftermarket replacements in this lifetime, stay away from Caniao shipping service. Pay a few dollars extra for something faster. How hard is it to effect this repair? Removing and replacing entire LED strips is easy. Getting a 55" TV apart without mishandling/cracking the LCD is not. Spread out some blankets. Make a stretcher from two lengths of PVC pipe, 1x2 lumber covered with pipe insulation or something like that, and get a friend to help you lift the LCD off the light box (without flexing it). Sound scary? Maybe, but if you read through the comments, lots of people having no prior experience, have successfully fixed their TVs after watching this video. First time is always the hardest... I've no experience with the glue you suggest. I know the HF epoxy I use works fine. Good luck! Thanks for commenting.
@@LawrencePina The display in the upper left corner is evenly lit all the time. The white spot is only visible when the picture is bright and disappears when the picture is darker. I noticed tonight as the room got darker the picture got darker and turning on the light would brighten the picture. That has never happened before. I turned off the ECO sensor and the picture is bright all the time even in the dark,so I think the ECO sensor is also acting up. The glue I mentioned is something similar to Crazy Glue.(clear liquid and super strong bond) Thanks for replying.
This guy is very very good and descriptions so I give this guy a cookie no I'm seriously those are the diffusers inside that fallen off because it's curved and because of the heat you need to keep those pieces because you need to go back on so you're probably going to show us how to do that but I was just saying
The glue you use and how carefully you replace the caps is very important. Please watch additional gluing tips here: ruclips.net/video/xaaGEDHwwAg/видео.html LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen. Good luck! Thanks for commenting. Please like and subscribe as it really helps the channel.
Did everything right all turns on but no data on screen , just a black screen slightly purple but no options on screen . Any ides please would be great 👍
The slightly purple glow (backlights ON) you see is normal. No problem there. No data on the screen means either: 1) The screen is damaged or 2) The flat pack cables between the source driver boards and the main digital board are not inserted properly. Try reseating those cables. If that doesn't help, try disconnecting them one at a time. If the opposite half of the LCD suddenly comes to life, then ruclips.net/video/CFqSv3Rnk84/видео.html "LCD/LED TV Repair Secrets - Backlights and Sound, but No Video" may help you to restore the full display. Good luck! Thanks for commenting.
Hi there, after I fixed 4 reflectors and closing the TV, a week or 2 the screen got more pink-ish. I think I did the 2 reflector sheets in the correct order: Lowest is the stiff one with the rough side facing the reflectors, then above the stiff panel, the flexible panel with the shiny side facing the stiff panel. Is this correct?
I have a 40” 3D Samsung TV which is around 4 years old, it now has a white ring on left side and gets screen burn if on one screen too long, my friend who can fix anything apparently says it can’t be fixed, would this work on my TV?
No, your friend is right. There's no evidence, not a shred of evidence that this problem can be fixed. Ask yourself, where are the videos? There aren't any. If there were any, there would be eye witness testimony (comments) from people who'd studied them and managed to fix their TVs. But there aren't any comments because there are no videos. Best to throw the TV away and buy another one. In fact, it's madness to even think the TV can be fixed. Just talking about it could get us censored here on YT.
I thought I did! I used Harbor Freight 5-minute epoxy, which cost $1/pkg. You mix the two tubes together and apply tiny drops to the LED strip (not to the lens cap) with a toothpick. Press the cap down and don't touch it again for at least 5 minutes. One thing I might not have shown (in this video) - you have to make sure that all of the old glue has been scraped away or melted off of the LED strip. Lens caps have to sit flush. If they're replaced on an angle, undiffused light will escape from the opening and you'll see halos, especially on light color backgrounds.
Hi! mine shows light circles, opened and all the lenses are in place any ideas what could be the problem in my case? started with one and now is literally every single one.
Lenses have loosened. Light is escaping from underneath. Watch the companion video which shows symptoms closer to your problem. Good luck. Thanks for commenting.
@@LawrencePina well in my case it is perfect circles in all spots, checked again and just two lenses were loose but all the others are firm in place. :(
Thanks for the video. My 65” had 35 lens that came off. Can’t say much for Samsung’s workmanship. The pieces of the tv were very brittle and fragile. Be extremely careful when removing the frame. You would think that there would be a class action suit against Samsung for poor workmanship.
One or two open LEDs (random black spots on the display) are very hard to see in normal use (when the TV is ON) with the LCD is in place. You really have to take the TV apart, remove the LCD (exposing the light box), then power ON to spot them. So, if you're noticing black spots on the display in normal use (when the TV is ON), it means you're looking at a lot of open LEDs (not just one or two). Entire strips of LEDs may be out. The good news is that it's relatively easy to install a new set of LED strips. No soldering is required. No special tools are required. Just take the display panel assembly apart. Remove the LCD and light up the box to confirm how many LEDs are out. Note the exact part numbers on the unlit strips, then see if you can find new replacements online. It's best to order new LED strips, not used or remanufactured. If you can find them for a reasonable price, it's generally well worth doing. Good luck and thanks for asking...
It's not just a Samsung problem. The companion video titled "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" shows what happens when you ignore this issue on an LG TV. The display panel assembly was very different on that LG, so unless Samsung also owns all the display panel manufacturing companies, I'd say it's an industry wide practice, designed to make you "throw it away and buy another one." That's how the woke generation will save the earth. Thanks for commenting!
Modern products are deliberately (key word: deliberately) designed to fail shortly after the warranty period expires. When that happens, consumers are told they should "throw it away and buy another one. Recycling is so green! That's how we save the planet!" People do what they're told, no matter what the cost. That's why it happens.
Thanks for all the great info! Great Video. Question ? My 65" Samsung has a off center a little to the right side lower half of screen crooked brite white line ? Same problem or different ? Can you help ? Thanks in advance for your time and any sugestions you may offer.
Your 65" TV may be edge lit. The line you describe might be the beginning of the problem shown here: ruclips.net/video/raicZqT-qVo/видео.html Without a picture of the line and without taking the TV apart, it's hard to say...
Your wish has been granted. Please watch" LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" ruclips.net/video/xaaGEDHwwAg/видео.html for important gluing instructions. Thanks for asking!
My Samsung curved 55UHD has the same issue. Also, I now know why it had a bit of uneven bright place since I bought it. It just had one of these lenses not attached proper. Well, after 6 years it fell off. Still in doubt to buy a new one, as opening it up is not without risk either.
We also own a (flat) Samsung UN55JS7000F UHD TV (manufactured 2016). The uneven bright place that you mention was in the upper left corner of the display. Within 18 months, a number of LED strips at the very top of the display became intermittent. Sometimes they would light. Sometimes they wouldn't. Sometimes they would come on after a while. Until then, the top of the screen was dark. Aftermarket LED strips were cheap enough on Aliexpress, so after taking the TV apart to confirm the part numbers, I ordered a set, installed them, and the TV has been fine ever since. If you decide to fix yours, be advised that you have to very careful handling LCDs over 50". If not supported carefully, they are easily cracked. To minimize that possibility, I made two stretchers from 1" x 2" wood strips, covered them with split foam pipe insulation, and got a second person to help me. While I lifted one side of the LCD (hands at 1/3 and 2/3 length for even support), my helper slipped a stretcher under that side. Repeat for the other side. Easy enough now for two people to safely transport the LCD to a second work table. I hope this extra info helps. If all you're dealing with is loose diffuser caps, be sure to use the recommended glue, and consider watching LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen ruclips.net/video/xaaGEDHwwAg/видео.html for additional tips. Good luck! Thanks for commenting.
@@LawrencePina Thanks to your guides, I have fixed it today. Used two window -carrying-things with two rubbers each to pull off the glass. Glued the one lens with three small drops of epoxy applied with a bamboo pick. Used a couple of rolled up towels to make sure that pressure was distributed. Before I started, I cleaned the whole room, and send the kids out to avoid any dust between the white sheet and the black panel. The thing is brand new now. Good thing that you can still screw these open. The next models probably will be glued like phones, or snapped together.
Yes, you can continue using the TV and yes, the condition does get worse over time. Check out ruclips.net/video/xaaGEDHwwAg/видео.html LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen. Good luck! Thanks for commenting.
Where exactly did you GLUE the Diffuser Lenses to get them back in place without interfering with the LED in the middle of each one? I would have appreciated that small detail...Otherwise great video. Thanks for doing this Lawrence. JP
For additional gluing tips, please watch the companion video titled "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" at ruclips.net/video/xaaGEDHwwAg/видео.html Your question(s) are answered there. Thanks for asking!
I don't think accidentally touching an LED would cause a problem. You have to touch failed LEDs to remove and replace them, something I've done many times, without ill effect. But, disrupting the phosphorus (yellow) film (not always present) might cause them to change color. That area of the display might turn blue as shown here: ruclips.net/video/8g3uQaNK0Jo/видео.html Thanks for asking! Sorry for the delayed answer. Your question did NOT appear in my YT notifications (censorship is terrible) and I just today, happened upon it. For what it's worth, seems like two reasonable questions to me!
I use 5-minute epoxy. Please watch "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" and learn from my mistakes. It is very important to glue the caps square to the LED strips. I show what happens when you don't glue properly in this second, companion video. Good luck and thanks for commenting!
There are literally dozens of glue products to choose from at the hardware store. I haven't tried all of them (so I don't know if there's something better than HF 5-minute epoxy), but I have tried two different Krazy Glue products, HF Super Glue, Duco Medium Strength Polyurethane Plastic Model Cement and had no luck with any of them when used for this purpose. Please watch "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" and learn from my mistakes. It is very important to glue the caps square to the LED strips. I show what happens when you don't in this second, companion video. Good luck and thanks for commenting!
Best to ask Samsung whether they fixed (or even recognize) the issue. From comments left by others, it seems they haven't. Much newer OLED and curved-screen models suffer from the same problem. And, it's not just Samsung brand. It's an industry wide problem designed to make you "throw it away and buy another one."
@@LawrencePina wery well said about how industry works these days, I fixed 65inch (curved) Panasonic tv two years ago with the same problem, bloody 130 lens I had to glue back on, all were falling from the touch of finger 🥵
My guess would be intermittently open LEDs in the corners. The corners start out dark but after a few minutes the intermittent LEDs may (or may not) switch ON restoring normal brightness. Samsung display panels are prone to that (especially at the top of the screen). My Samsung 55" had that problem. A friend's Samsung 65" also had that problem. I've seen it many times and it's only going to get worse. So, if you're so inclined, consider taking the TV apart and replacing just the affected LED strips at the top and bottom of the display. Good luck. Thanks for asking.
You can. I wouldn't. Check the comments. People who have (used hot glue) say that it didn't work out very well. For additional gluing tips please watch ruclips.net/video/xaaGEDHwwAg/видео.html LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen. Good luck! Thanks for commenting.
Not really. Obviously the OEM glue doesn't last. Super glues don't work at all. Best to use Harbor Freight "Super strong quick setting epoxy" aka 5 minute epoxy. It's strong enough to hold the caps down, but not so strong that you can't twist them off again should you ever need to replace the LED. For additional, very important gluing tips, please watch ruclips.net/video/xaaGEDHwwAg/видео.html the companion video "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen." Good luck. Thanks for commenting!
For additional take apart info and other helpful tips, please watch "LG 42LN5700 - 47 LN5400 LED TV Screen Repair Secrets" at ruclips.net/video/mW0OAYIRdqc/видео.html Good luck, and thanks for commenting!
Same as the Tv shown in ruclips.net/video/8g3uQaNK0Jo/видео.html titled Dark Blue Picture? If so, please leave another comment under that video indicating whether you got your 65" fixed under warranty, whether you fixed it yourself, where you got the new LED strips, etc. Thanks for commenting. That's how we help each other!
I have similar problem but mine led lights didnt fall off and they are on top of each other when im warching the tv. If someone have an answer what is causing that I would appreciate thanks.
Even if the caps are still attached, they might not be square to the LED strips. Please watch LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen, ruclips.net/video/xaaGEDHwwAg/видео.html, for examples of this problem. If the diffuser caps have lifted even slightly, then you'll get bright cresents, halos and other scaring on the screen.
In the meantime, consider watching ruclips.net/video/xaaGEDHwwAg/видео.html LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen. It shows what happens when you ignore the problem and also offers additional gluing tips. Good luck! Thanks for commenting.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Thank you so much for this video! The only thing that I wish you would have covered is how you glued the lenses back in place. Since they are lenses, I assume that if you put glue in the wrong place, you will affect the light dispersion. Any tips would be appreciated.
Your assumption is spot on. Imprecise gluing does affect light dispersion. Please watch the companion video titled "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" at: ruclips.net/video/xaaGEDHwwAg/видео.html for examples of what can happen and additional gluing tips. Thank you for commenting!
@@LawrencePina I have this with a Samsung 55" curved screen. Does this happen with Oled (phone type ) or just LED?
Both plasma and OLED screens are self illuminating. Unlike LCD screens they do NOT require backlights, so if you have a true OLED TV, then you should NOT have this problem. You may experience similar symptoms, but loose diffuser lenses will not be the cause of it. Good luck! Thanks for commenting.
My question as well. Good to know he answered your question.
I've started to notice the same on my TCL QLED. It's a very faint spot in the lower left section of the screen but barely noticeable unless you focus on that area for a while.
Should I just leave it be? Is it going to get worse? It's barely noticeable unless I stop to look at it for a few seconds.
What happens if you don't glue back the reflector lens?
Thanks! This was brilliant. My son-in-law was going to throw away his 50" Samsung for two bright spots. He got a new TV under a 5 year warrantee plan. I fixed his old one for $8.00 in epoxy glue, and now I have a beautiful TV!
Was given a 55in TV for free because of this problem. I was able to fix it because of your video. Thank you very much.
Thank you for this video! I managed to fix the bright spots in the living room TV with my dad with the guide you made. Everything worked out splendidly and we saved some money too
Thank you Lawrence! These instructions along with your companion video were easy to follow and did the trick! Saved me a few hundred dollars for sure! Just like you said, not only did I have a diffuser loose but several others were about to go and I was able to fix them all at once. Thanks again!
Very informative video sir. Now I understand why my TV has a bright spot and how to fix it... thank you!
Thanks so much. Great video. Saved me from buying a new TV! Had 3 diffusers that fell off and fixed them with this tutorial.
This Video is exactly what i was looking for, Im going to try this before admitting defeat and binning my TV. Thank you.
Before you do, please watch ruclips.net/video/xaaGEDHwwAg/видео.html LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen for additional gluing tips. Good luck! Thanks for commenting. Please repost when you're finished. Let everyone know how you made out.
thanks for this video man... i'll try to fix mine on free time...
Exactly the problem. Thanks for such a great explanation
Thank-you. This was very helpful. I had one white spot, found the initial loose lens, then found 4 more that wiggled loose. All glued up with and will be putting screen back together today as I let the glue completely dry overnight. Take your time when you do this. I snapped the outer most trim piece taking it off, but it was an easy fix gluing it together. Saved me a couple thousand dollars as I was contemplating getting a new 75" tv!
great video!!i am glad my problem is fixable.i am afraid of doing it by myself,but i will find someone that can help me.i have only one white spot.thank you so much!!!
Thanks for sharing this! Our tv had several light spots and we were able to fix it after watching your video. I used gorilla glue to glue the lenses back in place.
Did you glue directly to the LED or around it?
@5:14, what's the name of the tinted panel/film that you are removing here?
The reason why I ask is on my Samsung TV I have a 2x5mm hole/chip in the film so that area is constant bright white. Though small its quite noticeable - Is there a way to improve the display. Ie, buy a small sheet of this film materials and 'patch' the area? Or do i need to replace the entire component?
The sheet I'm lifting at 5:14 is the LCD (liquid crystal display). Be very careful trying to patch it. LCDs are very fragile, easily cracked, and while they can be replaced, they're just not available. Try not to press very hard. If you crack the LCD, the screen will fill with colored lines ruclips.net/video/cOU5RVsFt70/видео.html and the TV will be scrap. I'm not sure how someone would fix the problem you describe. Even if you filled the hole with a tiny bit of dark caulking, wouldn't it then show up as a dark spot on a light background? Please repost after the repair to let others know what you used and how it worked out. I know I'm curious... Good luck! Thanks for commenting.
Followed the instructions and successfully completed simillar repair. Thanks
Thank you for this video. Following your instructions I have managed to cure the white spots on my screen. Sadly (not due to your instructions) I seem to have caused another problem despite being as careful as I can. Time for a new TV but I think I'll be looking for one with a different method of manufacture than the flimsy LED lenses.
Hi Lawrence i enjoyed your video and i have a couple of questions. First off i have a 5 yr old Samsung un50js7000 50" Flat screen and for about 2months I've had 2 white blotches at about 10 o'clock and 2nd at 2o'clock positions. Yesterday a 3rd blotch showed up at around the 12 o'clock position and i called Samsung and they went thru the settings remotely and they reset the tv to its original position when i bought it but the blotches were still showing up. I can't afford a new tv right at this moment so i'm inclined to take it apart and hope the diffusers have dropped out of position so my question for you is what type of glue did you use to put your diffusers back into place? Thank you for your time, Harry
How absurd of Samsung to do that. They know what's going on! Typical of how things are today. Deny, deny, deny, repeat anything but the truth. Countless Samsung TVs have this problem. Just read the comments! I've personally fixed dozens of Samsung TVs with this problem! The 5-Minute epoxy I use is sold at Harbor Freight. Before you take apart your TV, please watch ruclips.net/video/xaaGEDHwwAg/видео.html "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" for additional info and some very important gluing tips. Many people have been kind enough to come back and comment that they successfully repaired their TVs (or TVs that were given to them) after watching these two episodes, so chances are very high that you will be successful as well. Good luck. Thanks for commenting. Please like and subscribe as it really helps the channel.
@@LawrencePina Hi Lawrence thanks for the info on where you purchased the Epoxy Glue/Harbor Freight is a great place to get items that you won't find anywhere else. Also i did Subscribe to your great channel!!
@@LawrencePina Hi again i have been shopping around for the LG Nano75 series with AI. Also my sister has had an LG for over 10 yrs. and she couldn't believe my Samsung which cost me $700.00 just 5 yrs. ago is pretty much junk now. My question to you is "What do you think about the LG Nano75 series 50" tv? I like the fact that it has AI and a "Magic" remote that is like a mouse, and has more than 750 channels built in unlike Cable channels? Thank you, Lawrence, i appreciate Ya and i will watch the other video you have before i take apart my Samsung. Hopefully with your instruction i can fix it and use it in my bedroom. Thank again my friend!!!
@@techFPV5964 I've no experience with LG Nano75 series but for what it's worth, older LG and Samsung TVs often used similarly manufactured display panel assemblies which failed exactly the same way. Are things any different, now? I doubt it. Regarding the 750 built-in channels those are mostly Pluto.TV channels (which you can view for free, right now, on your phone or computer) and possibly some IP TV channels. You can add them to any TV (even old, so-called dumb TVs) with an Android TV box, an Amazon FireTV stick, a Roku stick, etc. In my opinion, that's a much better ay to add them. Hope this helps. Thanks again for commenting.
Very simple... Thank you for your Video....
This was great! Couldn’t get the glue recommended and bought Locktight, this didn’t work, cleaned the lens’s and applied Gorilla Glue and this worked better. It’s just took a really long time for the glue to set.
Well done! Excellent video and I like the way you explained everything so well.
What an awesome video Lawrence. Very few are as detailed as you.
I have this problem on a 32" Samsung monitor, and now I know what to do.
Thank you very much! The repair has completely eliminated the white spots.
Unfortunately, the right corner of the screen is slightly broken, but that hardly bothers me during use.
Just a thought - if you're using a TV box, try pulling in the horizontal and vertical display settings. If the defect at the right corner is tiny, that will put it in a black border, where it will be unlit and less noticeable. Changing resolutions on the TV might hide it too. Hope this helps. Thanks for commenting.
Great video does it matter what side the thick diffuser sheet lays toward led strips -one side is smooth and other rough.
Generally, the smooth side of the thickest, lowest layer, faces the layer above it and the grainy or rough side faces the LEDs. The other layers generally go together like this:
Vizio Model M422i-B1 display panel disassembly notes (4 layers under the LCD):
0) LCD (the top layer)
1) Thin, frosted diffuser. Frosted side facing viewer. Shiny side facing LEDs.
2) Thin, silver-color reflector. Grainy side facing viewer. Smooth side facing LEDs.
3) Clearer, thin, silver-color reflector. Grainy side facing viewer. Smooth side facing LEDs.
4) Thick, white-color, hard plastic sheet. Smooth side facing viewer. Grainy side facing LEDs. Note that this is the reverse of how the other layers are oriented.
Hope this helps. Thanks for asking! Please like and subscribe as it really helps the channel.
Will this work on Samsung in my case a un65h6350afxza I only have 2 diffuser sheets the thick one smooth on one side and a thin sheet with a mirror like finish on one side
Hi. I can't remember which way the thick diffuser goes. Shiny side down to LEDs or shiny up? I'm talking about the panel that sits above the lenses. Not the flimsy foil looking ones. Thanks
Generally, the smooth side of the thickest, lowest layer, faces the layer above it and the grainy or rough side faces the LEDs. The other layers generally go together like this:
Vizio Model M422i-B1 display panel disassembly notes (4 layers under the LCD):
0) LCD (the top layer)
1) Thin, frosted diffuser. Frosted side facing viewer. Shiny side facing LEDs.
2) Thin, silver-color reflector. Grainy side facing viewer. Smooth side facing LEDs.
3) Clearer, thin, silver-color reflector. Grainy side facing viewer. Smooth side facing LEDs.
4) Thick, white-color, hard plastic sheet. Smooth side facing viewer. Grainy side facing LEDs. Note that this is the reverse of how the other layers are oriented.
Hope this helps. Thanks for asking! Please like and subscribe as it really helps the channel.
I watched this 3hrs ago since I've stripped and repaired a Samsung 55inch curved tv glad I watched saved buying a new tv ,thanks very much cheers
Hi I noticed also a white spot on our Samsung Curved Smart TV... how you fixed that
hi, which glue would you recommend for the job ?
www.harborfreight.com/super-strong-quick-drying-epoxy-92665.html Thanks for asking! Also recommend watching "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" at ruclips.net/video/xaaGEDHwwAg/видео.html for more info and carefully reading through other people's comments (especially those pertaining to alternate glues) on both videos. Good luck! Please like and subscribe as it really helps the channel.
Wish I would have read this before I used superglue lol
Just finished doing our smart TV. You done a great job doing it. Thank you for sharing your experience doing it.
Took us quite a while, but was worth it. Better than to pay over £250 to get this sorted. We had 2 lenses fall of and another 2 were lose. We had no problems after we finished, like nothing has happened. So thank you 😊 great video.
Oh and the dark spots you got after are just dirt and dust particles, I had those on my laptop after I fixed my Ram. So I ask what it was at a repair centre and been told that this often happens when you repair a TV or computer, because it takes easy dust particles on the screen, so best deal it to wipe it with antistatic cloth before putting together, it should be fine after. 👍
Thanks for this feed. I had to fix 4 reflectors and put the whole thing back together. The white circles were gone, great thanks to your help in this video.
After a week or 2, on the right side corner a pink spot appeared with an triangle shape of 3 cm horizontal lenght, 3 cm vertical; in addition The entire screen got a bit more pink-ish. Question is where this comes from; any relation with the repair of the reflectors, or the effect of opening the flat screen and removing the panels? What to do?
I don't see how regluing diffuser caps could have caused these symptoms, especially weeks after the fact. It's more likely that the LEDs have started to change color and that the one in the corner is the most affected. For an idea of what might be going on, please watch ruclips.net/video/8g3uQaNK0Jo/видео.html "LCD/LED TV Repair Secrets - Dark Blue Picture." What to do? You may be able to restore neutral tint by adjusting picture settings. Otherwise, if the symptoms continue to worsen, consider replacing the LED strips. Lots of good info in the blue-tint video. Hope it helps. Good luck and thanks for commenting!
@@LawrencePina thanks for the swift reaction, I am going to watch the video and try to adjust the screen settings.
Is this the correct order for the 3 diffuser panels: Lowest is the stiff one with the rough side facing the reflectors, then above the stiff panel, the flexible panel with the shiny side facing the stiff panel.
@@LawrencePina after I fixed the reflectors and put the thing back together, the TV screen when bright white and so, I see the position in circles of the reflectors sitting, not the white spots. As per beloofd question what is the correct position of the stiff white reflectorpanel (rough side below); or could it be that due to handling the TV set the thin carton sheet around the LEDs is not in the correct position, having shifted a bit? Thans for the reply :)
In my experience, every display panel assembly is different. I've seen as few as two and as many as four layers. In all cases the thick, white plastic sheet is on the bottom. Having made the mistake of NOT paying attention to the order of assembly the first time I fixed a TV with this problem, I'm now very careful to keep the sheets in exact order as I remove them. For what it's worth, here are some (top to bottom) assembly notes I made on a (3-layer) Vizio Model D40-D1 TV:
TOP
0) LCD (3 layers under the LCD)
1) Thin, frosted diffuser. Frosted side facing viewer. Smooth side facing LEDs.
2) Thin, silver-color reflector. Rough side facing viewer. Smooth side facing LEDs.
3) Thick, white-color plastic sheet. Smooth side facing viewer. Rough side facing LEDs. Note that this is the reverse of how the other two layers are oriented.
BOTTOM
And here are some (top to bottom) assembly notes I made on a (4-layer) Vizio Model M422i-B1 TV.
0) LCD (4 layers under the LCD)
1) Thin, frosted diffuser. Frosted side facing viewer. Shiny side facing LEDs.
2) Thin, silver-color reflector. Grainy side facing viewer. Smooth side facing LEDs.
3) Clearer, thin, silver-color reflector. Grainy side facing viewer. Smooth side facing LEDs.
4) Thick, white-color, hard plastic sheet. Smooth side facing viewer. Grainy side facing LEDs. Note that this is the reverse of how the other three layers are oriented.
Remember every TV is different. My initial mistake was on an Insignia 42" model. When the sheets were reassembled in the incorrect order the result was a very strange looking picture, one that was difficult to watch unless the viewer was directly in front of the TV. Good luck and thanks for commenting!
Regarding the halos you're observing around the affected LEDs, best seen on a bright white screen, that's a gluing problem. Light is escaping from under the caps. Please watch Part 2, "Evenly Spaced Spots on the Screen" ruclips.net/video/xaaGEDHwwAg/видео.html for important gluing tips. I deliberately made several mistakes there to illustrate such problems. They're easily corrected, but you will have to take the TV apart again...
hello. nice video. i wanted to ask if there is any way of reducing flashlight effect (backlight bleeding from al of the corners on samsung tv) that i can try out? i've read that loosing a few screws a bit could help, but not sure if there are any on my ru8000 (model which has a screwless back cover).
Light escaping from the edges and/or corners of the display is generally caused by misalignment of the diffusing and polarizing sheets located directly below the LCD. The display panel may have been taken apart and reassembled incorrectly (plastic retaining frames not snapped all the way in) or one or more of the flexible sheets may have shrunk and warped due to overheating. If that's the case, then without replacement sheets, there's really no fix for it. For additional info, please watch "LCD/LED TV Repair Secrets - Half of the Display is Barely Visible" at ruclips.net/video/raicZqT-qVo/видео.html That Samsung TV also has a screwless back cover and what happened to it may reveal what's going on with yours. Good luck. Thanks for asking!
Awesome video that helped me take apart and replace over 50 diffusers that fell off or would have fallen off using 5 minute epoxy. To my dismay, my rework was approximately 90% effective. Once I reassembled and tested the 50 inch Samsung, there were 5 bright spots in various positions on the screen. I tested the LEDs before reassembly, but did not notice the 5 diffusers that were not sitting flush with the LED circuit board. Can you recommend a test? Turn off the lights in the room after powering up the TV to view the brightness of the LEDs?
Again, thanks for the video and I will be taking my Samsung apart again to rework the 5 diffusers.😃😃😃😃
For info on how to check for mistakes before reassembly, please watch ruclips.net/video/xaaGEDHwwAg/видео.html "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" starting from 18 minutes, 44 seconds. Lot's of gluing tips in that video as well. Hope this helps. Thanks for commenting!
@@LawrencePina Thank you for the informative video on the signs of defective diffuser rework. I will try again using your tips.
@@LawrencePina I found it helpful to test after putting the plastic screens back and applying power to the LEDs, but before the LCD screen. I found one diffuser that still required rework. 50 inch Samsung now working great!
Thank you very much. All sorted.
Great instructional video! Cheers mate
Awesome and didactic video!!! Thanks a lot, muchas gracias!!
hello and thanks for the video. I have 5 year old 50inch Samsung LED tv. About a month ago I started to see pinkish blurry spot in one area of the screen. Googled it only to find out that I have to bin my telly and get a new one. in a meantime, the pink is gone and in the very same area, a white spot just like on the video appeared instead of it. I would be extremely happy if I have the very same issue you're dealing with in the video. is there any other way (besides shaking the TV and wait for rattle sound) to find out if I have the loose diffuser lens issue? I would like to know your opinion before I open the TV. many thanks for your help. pictures below if that helps.EDIT/UPDATE: I shifted the tv from side to side and the lens does slide on the bottom....so yeah, it is this issue!
Each lens cap is held in place by three little posts and as the first one detaches from its post hole, colored light escapes causing the symptoms you describe. Once the cap detaches completely, you get a bright spot. And, once it starts, it just gets worse, meaning that upon disassembly, you're likely to find a surprising number of loose lens caps. Please watch the companion video titled " LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" ruclips.net/video/xaaGEDHwwAg/видео.html for confirmation. Good luck and thanks for commenting!
@@LawrencePina I've done it! obviously together with a friend of mine...I was not able to manipulate with such a big TV by myself. but wow, if it was not because of you, I would most likely buy a new tv. MASSIVE THANKS!
Great video and very helpful 👍👍👍👍👍👍👍👍
So what glue did you use how much and does where you put the glue matter? Quite a bit of detail left out and mentioned late. Still fantastic but skipping the glue process all together is a bad idea
ruclips.net/video/xaaGEDHwwAg/видео.html
Thanks for the video! I was just wondering why does my tv have a few bright spots on them & thought I have to buy a new one soon.
Thank you for the nice tip,got the same problem on my led tv.❤
To prevent this in future. Shut off your TV/Screen when not in use or when you can. Heat from the LED is what causes the Lens to separate from the LED in time.
So Lawrence how much would this repair cost if i took it to a shop?
There aren't any consumer electronics repair shops where I live, so I can't really say. I'm sure it's different in Asia, India, and other parts of the world, but here in the US, when something breaks, it's pretty much repair-it-yourself or throw it away and buy another one. Me? I think it's broken anyway, and it's going to get worse, so why not give it a try? Good luck! Thanks for commenting.
Why did you not video the lens gluing process?????
Because at the time, I wanted to show what was causing the problem and I didn't think people would need gluing instructions. Obviously, I was wrong, so I linked a second video titled "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" and you can watch it here: ruclips.net/video/xaaGEDHwwAg/видео.html Good luck! Thanks for commenting. Please like and subscribe as it really helps the channel.
What glue did you use?
www.harborfreight.com/super-strong-quick-drying-epoxy-92665.html
Hi i have similar problem with samsung qled q70r which is ou of warranty. But i wonder how to open this "bezel-less" front display/glass ? do you have any idea ? Thanks.
Newer Samsung TVs tend to be press fit/snapped together. Lots of videos on YT showing how to pry those apart. Good luck! Thanks for asking.
Hi enjoyed your video, I just have a question, what type of plastic glue is suitable to use.
I've had very good luck with Harbor Freight 5-Minute Epoxy (product shown about 8 minutes and 30 seconds into the video). It's strong enough to keep the caps from falling off again but weak enough so that you can easily twist them off in case you need to. If you're going to attempt this procedure, please watch the companion video "LCD/LED TV Repair Secrets - Evenly Spaced spots on the Screen" for important gluing tips. Good luck and thanks for commenting!
Got brand new 85 inch sony bravia from best buy , Guess what ,got same bright spots on bottom , got it replaced with another brand new one same bright spots., replaced with another one same problem , replaced another one same bright spots , now m tired of replacing TV,s .
But can't get rid of these bright spots.Could you imagine quality control of Sony , How can they pass all TVs with same problem.
I can't even think of opening and repair it , coz it's brand new TV.Was thinking if there is any setting or software update etc could fix this problem.
It's best to have the unit powered on, so you can look directly down at the light to make sure the lens is perfectly centered. You want to block as much forward light as possible while looking straight on, like an eclipse.
I used a clear 2 part resin that had a cure time of 5 minutes. I made multiple small batches, applied with a tooth pick. This held very well.
Watch the screen ribbon cables, I started to assemble the front bezel upside down and ruined the screen.
We just repaired like 20 reflectors. Couldn''t believe how many were loose. It is so much better but still see some faint white circles. We might have put too much glue on them. So I'd say don't over do it on the glue application. But definitely worth the attempt.
Also I probably didn't place them all with the post holes perfectly lined up so light escapes from under them! Place them perfectly in place is important.
Thanks for the tip! Nice to know it isn't something really serious that's gone wrong.
Would super glue work to glue these back on? It isn't as viscous as 5 min epoxy and the post holes would be easier to apply a drop and align the lens properly. Thanks.
Superglues haven't worked very well for me, at least not for this purpose, nevertheless many people choose to use them. Please read through the comments both here, and under companion video ruclips.net/video/xaaGEDHwwAg/видео.html titled "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" to see how that worked out for them. Good luck! Thanks for commenting.
thanks for the helpful video sir
thank you for the great video, Sir! I bought a 50" Philips TV and I have bright spots since the very beginning. I'll give it a try!
What glue did you use thanks
I use this Harbor Freight glue: www.harborfreight.com/super-strong-quick-drying-epoxy-92665.html It's strong enough to keep the lenses from falling off again, but not so strong that you can't twist them off in case you ever need to replace an LED. Before you start the repair, please watch "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" ruclips.net/video/xaaGEDHwwAg/видео.html for additional instructions and very important gluing tips. Good luck. Thanks for asking!
What type of epoxy glue did you buy?
www.harborfreight.com/super-strong-quick-drying-epoxy-92665.html and please watch Part 2, "Evenly Spaced Spots on the Screen" ruclips.net/video/xaaGEDHwwAg/видео.html for important gluing tips. Thanks for asking!
We really cant catch a break with these LED TVs, I've got this issue on a small 32" 2018 screen, but I had to do a much more difficult repair on a 60" that had the bad filter coating on the LEDs themselves, causing them to put out a very harsh purple light. Had to replace the entire grid, but thankfully the replacement was not that expensive.
Agreed. Dark blue/dark purple display caused by LEDs losing their filter coating is the latest (pre-planned?) failure: ruclips.net/video/8g3uQaNK0Jo/видео.html Congrats on fixing your 60". Welcome to the club and thanks for commenting!
What glue was used?
ruclips.net/video/xaaGEDHwwAg/видео.html
Lg keeps turning off, any suggestions. Thanks for sharing
This is a very common LG problem, most likely caused by shorted LEDs in the display panel assembly. Watch these two videos in the order given for detailed repair info:
LG 42LN5700 - 47LN5400 LED TV Screen Repair Secrets
ruclips.net/video/mW0OAYIRdqc/видео.html
LG 50UH5500 UHD Smart TV Repair Secrets
ruclips.net/video/I4m8IuQqN28/видео.html
Good luck. Thanks for asking!
Hello, can you tell me which glue you used?
Harbor Freight 5-Min Epoxy: www.harborfreight.com/super-strong-quick-drying-epoxy-92665.html
Unfortunately, I do not. Having made that mistake once, I'm very careful now to keep the sheets together. All I know is that the thick, white plastic sheet always goes on the bottom. The thinner sheets lay on top of that. Then comes the LCD support/frame followed by the LCD, followed by a metal frame (if present) followed by the front cover/bezel. Sorry for the delay in getting back to you. This question must have been sent to Giorgi Otiashvili who is at the top of this thread. It not forwarded to my email and I just saw it!
Can you use superglue?
Did this! Found one off and 6 that were loose. Glued, cured and reassembled. Now have a dark blue screen with white blotches on the screen with streaks and a little color showing through. Reopened the back to make sure all connections were correct, reassembled and no change. Don’t know what to do now and any suggestions would be greatly appreciated. Samsung 2015 UHD Smart TV model JU6700F - 65” Curved TV.
Sorry to be the bearer of bad news, but those symptoms indicate a cracked LCD. If it's any consolation, no doctor can cure every patient. No matter how much experience you have, no matter how careful you are, you can't win them all. But, we can learn from our failures. I learned that the largest LCD size that I can handle comfortably, all by myself, is 50". With any size larger than that, I'll ask someone to help me and use a stretcher made from two lengths of 1" x 2" lumber (1/2" to 3/4" pipe also works) covered with foam pipe insulation. Even then, handling 65" size is scary. Please don't let this failure discourage you. I give you great credit just for trying. The local transfer station will be loaded with similar size TVs, which locals can generally take for free (provided you ask nicely), and if defeat doesn't set well with you, you can try again. Sooner or later, you'll have successfully repaired so many TVs you won't know what to do with them.
I wish you would have covered is how you glued the lenses back in place
Please watch the companion video titled "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" at: ruclips.net/video/xaaGEDHwwAg/видео.html for additional gluing tips. Thank you for commenting!
@@LawrencePina Thank you. Much better explanation on how to glue them back on. You should add that link to this video. Your time is appreciated.
i have also a problem of lighting on a 22" computer monitor also samsung , i did not try to shake it yet , but i have white clouds on the upper part may be its the same problem...thanks for this nice video.
I have a Vizio TV doing the same thing. It’s about 7 years old and has two bright spots. I may just follow these instructions instead of buying a new TV.
Great job buddy, keep up the good work.
Great video and spot on with all the info. I would add just to be EXTREMELY careful when removing the glass screen. My curved Samsung cracked almost immediately upon lifting it off of the unit.
If it's any consolation, I've also been there, done that. You DO have to be extremely careful. The TV in the video was only 40" diagonal. That size is relatively easy for one person to handle. But, as you caution, when lifting anything much over 50", it's best to use two people and a makeshift stretcher. Two strips of 1" x 2" furring covered with foam pipe insulation work well. Two lengths of foam-covered PVC pipe can also be used. When all is said and done, though, no doctor can cure every patient. At least you tried, and it will go better next time. Good luck and thanks for commenting!
Outstanding video. Thank you so much for your work and sharing this.
I have my TV apart now. 65” Samsung. 112 total diffusers and 9 that are loose. I need some help. Thought I could just use like super glue to reattach these, but that’s not working. What bonding agent should be used? 🤨
I use Harbor Freight "Super strong quick setting epoxy" aka 5 minute epoxy. It's strong enough to hold the caps down, but not so strong that you can't twist them off again should you ever need to replace the LED. For additional, very important gluing tips, please watch ruclips.net/video/xaaGEDHwwAg/видео.html the companion video "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen." Good luck. Thanks for commenting!
@@LawrencePina - Awesome! Thanks for the tip. We did windup trying my daughter's (2nd grade project - LOL) hot glue gun. Which seems to have worked for the purpose at hand. Still haven't put it all back together and tested it yet, so fingers crossed. :D
This just happened on my Samsung 6 series UN55KU6290F TV in the upper left corner,mfg,July,2016.
How difficult a fix is it on this model and could something like Gorilla super glue be used?
All of the 2016 era 55" Samsung TVs that have come my way (including the 2016 Samsung UN55JS7000 we fixed 3-4 years ago, kept, and watch almost every night) have had heat related problems in the top four rows of LEDS. Typically: "The TV turns on but the top of display is noticeably dark, as if the upper row(s) of LEDs is/are not lit. After a while, the LEDs may turn on all by themselves and the display will be evenly lit, except for the extreme upper left corner, which always remains dark." I suspect your TV is starting to have similar problems. The only way to know for sure is to take it apart to examine the LED strips. In addition to the unlit section in the upper left corner, you're likely to find other LEDs in the top four rows that are dim or unlit, as well as noticeably burned areas on either the left or right halves of upper strips. In that case, you might be able to make one good strip from two bad ones, by swapping halves. What about the damaged strips? In most cases, brand new, aftermarket, replacement LED strips are available on aliexpress.com, at very reasonable prices. Carefully note the part numbers stamped on the strips that have failed. Order replacement strips from vendors listing brand new, aftermarket stock. Stay away from remanufactured OEM strips. Try NOT to order new OEM strips. Also, if you want to receive aftermarket replacements in this lifetime, stay away from Caniao shipping service. Pay a few dollars extra for something faster. How hard is it to effect this repair? Removing and replacing entire LED strips is easy. Getting a 55" TV apart without mishandling/cracking the LCD is not. Spread out some blankets. Make a stretcher from two lengths of PVC pipe, 1x2 lumber covered with pipe insulation or something like that, and get a friend to help you lift the LCD off the light box (without flexing it). Sound scary? Maybe, but if you read through the comments, lots of people having no prior experience, have successfully fixed their TVs after watching this video. First time is always the hardest... I've no experience with the glue you suggest. I know the HF epoxy I use works fine. Good luck! Thanks for commenting.
@@LawrencePina The display in the upper left corner is evenly lit all the time.
The white spot is only visible when the picture is bright and disappears when the picture is darker.
I noticed tonight as the room got darker the picture got darker and turning on the light would brighten the picture.
That has never happened before.
I turned off the ECO sensor and the picture is bright all the time even in the dark,so I think the ECO sensor is also acting up.
The glue I mentioned is something similar to Crazy Glue.(clear liquid and super strong bond)
Thanks for replying.
This guy is very very good and descriptions so I give this guy a cookie no I'm seriously those are the diffusers inside that fallen off because it's curved and because of the heat you need to keep those pieces because you need to go back on so you're probably going to show us how to do that but I was just saying
The glue you use and how carefully you replace the caps is very important. Please watch additional gluing tips here: ruclips.net/video/xaaGEDHwwAg/видео.html LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen. Good luck! Thanks for commenting. Please like and subscribe as it really helps the channel.
Did everything right all turns on but no data on screen , just a black screen slightly purple but no options on screen . Any ides please would be great 👍
The slightly purple glow (backlights ON) you see is normal. No problem there. No data on the screen means either: 1) The screen is damaged or 2) The flat pack cables between the source driver boards and the main digital board are not inserted properly. Try reseating those cables. If that doesn't help, try disconnecting them one at a time. If the opposite half of the LCD suddenly comes to life, then ruclips.net/video/CFqSv3Rnk84/видео.html "LCD/LED TV Repair Secrets - Backlights and Sound, but No Video" may help you to restore the full display. Good luck! Thanks for commenting.
@@LawrencePina thank you for taking the time to reply will try and do that thanks
I'm now having a problem with 2 bright spots on my Samsung 50 inch series 6 HD 6500 tv I got 5 yrs ago. Thanks for this video!
DITTO!!!
Thanks for explaining the order of the diffuser filter sheets.
Hi there, after I fixed 4 reflectors and closing the TV, a week or 2 the screen got more pink-ish. I think I did the 2 reflector sheets in the correct order: Lowest is the stiff one with the rough side facing the reflectors, then above the stiff panel, the flexible panel with the shiny side facing the stiff panel. Is this correct?
I have a 40” 3D Samsung TV which is around 4 years old, it now has a white ring on left side and gets screen burn if on one screen too long, my friend who can fix anything apparently says it can’t be fixed, would this work on my TV?
No, your friend is right. There's no evidence, not a shred of evidence that this problem can be fixed. Ask yourself, where are the videos? There aren't any. If there were any, there would be eye witness testimony (comments) from people who'd studied them and managed to fix their TVs. But there aren't any comments because there are no videos. Best to throw the TV away and buy another one. In fact, it's madness to even think the TV can be fixed. Just talking about it could get us censored here on YT.
Good video, only thing is you should have shown how you glued them back.
I thought I did! I used Harbor Freight 5-minute epoxy, which cost $1/pkg. You mix the two tubes together and apply tiny drops to the LED strip (not to the lens cap) with a toothpick. Press the cap down and don't touch it again for at least 5 minutes. One thing I might not have shown (in this video) - you have to make sure that all of the old glue has been scraped away or melted off of the LED strip. Lens caps have to sit flush. If they're replaced on an angle, undiffused light will escape from the opening and you'll see halos, especially on light color backgrounds.
I think it’s awesome that you are still replying to people 4 months after posting the video! Thank you so much!
@@LawrencePina thanks my question also. I was guessing you had done on the cap. Glad I saw this question
@@LawrencePina hi I need your help
Hi! mine shows light circles, opened and all the lenses are in place any ideas what could be the problem in my case? started with one and now is literally every single one.
Lenses have loosened. Light is escaping from underneath. Watch the companion video which shows symptoms closer to your problem. Good luck. Thanks for commenting.
@@LawrencePina well in my case it is perfect circles in all spots, checked again and just two lenses were loose but all the others are firm in place. :(
Replace the LED strips with brand new (NOT remanufactured) parts. Problem solved.
@@LawrencePina Thanks will do that, just ordered lets see how it goes once they arrive in a month or so.
Thanks for the video. My 65” had 35 lens that came off. Can’t say much for Samsung’s workmanship. The pieces of the tv were very brittle and fragile. Be extremely careful when removing the frame. You would think that there would be a class action suit against Samsung for poor workmanship.
Yeah you would think, but people would be in court constantly if we sued for every badly put together product out there.
So we have to change fuse led mini lights for solving black spots
One or two open LEDs (random black spots on the display) are very hard to see in normal use (when the TV is ON) with the LCD is in place. You really have to take the TV apart, remove the LCD (exposing the light box), then power ON to spot them. So, if you're noticing black spots on the display in normal use (when the TV is ON), it means you're looking at a lot of open LEDs (not just one or two). Entire strips of LEDs may be out. The good news is that it's relatively easy to install a new set of LED strips. No soldering is required. No special tools are required. Just take the display panel assembly apart. Remove the LCD and light up the box to confirm how many LEDs are out. Note the exact part numbers on the unlit strips, then see if you can find new replacements online. It's best to order new LED strips, not used or remanufactured. If you can find them for a reasonable price, it's generally well worth doing. Good luck and thanks for asking...
Great video thanks! Samsung should have been forced to issue a recall on this particular "time-release" defect.
It's not just a Samsung problem. The companion video titled "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" shows what happens when you ignore this issue on an LG TV. The display panel assembly was very different on that LG, so unless Samsung also owns all the display panel manufacturing companies, I'd say it's an industry wide practice, designed to make you "throw it away and buy another one." That's how the woke generation will save the earth. Thanks for commenting!
The t-con boards go bad and cause verticle lines on the tv often as well..its a $26 part and easy fix,,but most get new tvs
Hope do notice me anyway' what is the cause why it happened on a tv, rather than being too old?
Modern products are deliberately (key word: deliberately) designed to fail shortly after the warranty period expires. When that happens, consumers are told they should "throw it away and buy another one. Recycling is so green! That's how we save the planet!" People do what they're told, no matter what the cost. That's why it happens.
Great video thank you. Learn something new everyday
Thanks for all the great info! Great Video. Question ? My 65" Samsung has a off center a little to the right side lower half of screen crooked brite white line ?
Same problem or different ? Can you help ? Thanks in advance for your time and any sugestions you may offer.
Your 65" TV may be edge lit. The line you describe might be the beginning of the problem shown here: ruclips.net/video/raicZqT-qVo/видео.html Without a picture of the line and without taking the TV apart, it's hard to say...
This was super cool!
I wish u showed us where u put the glue at.. like the safe spots
Your wish has been granted. Please watch" LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" ruclips.net/video/xaaGEDHwwAg/видео.html for important gluing instructions. Thanks for asking!
My Samsung curved 55UHD has the same issue. Also, I now know why it had a bit of uneven bright place since I bought it. It just had one of these lenses not attached proper. Well, after 6 years it fell off. Still in doubt to buy a new one, as opening it up is not without risk either.
We also own a (flat) Samsung UN55JS7000F UHD TV (manufactured 2016). The uneven bright place that you mention was in the upper left corner of the display. Within 18 months, a number of LED strips at the very top of the display became intermittent. Sometimes they would light. Sometimes they wouldn't. Sometimes they would come on after a while. Until then, the top of the screen was dark. Aftermarket LED strips were cheap enough on Aliexpress, so after taking the TV apart to confirm the part numbers, I ordered a set, installed them, and the TV has been fine ever since. If you decide to fix yours, be advised that you have to very careful handling LCDs over 50". If not supported carefully, they are easily cracked. To minimize that possibility, I made two stretchers from 1" x 2" wood strips, covered them with split foam pipe insulation, and got a second person to help me. While I lifted one side of the LCD (hands at 1/3 and 2/3 length for even support), my helper slipped a stretcher under that side. Repeat for the other side. Easy enough now for two people to safely transport the LCD to a second work table. I hope this extra info helps. If all you're dealing with is loose diffuser caps, be sure to use the recommended glue, and consider watching LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen ruclips.net/video/xaaGEDHwwAg/видео.html for additional tips. Good luck! Thanks for commenting.
@@LawrencePina Thanks to your guides, I have fixed it today. Used two window -carrying-things with two rubbers each to pull off the glass. Glued the one lens with three small drops of epoxy applied with a bamboo pick. Used a couple of rolled up towels to make sure that pressure was distributed. Before I started, I cleaned the whole room, and send the kids out to avoid any dust between the white sheet and the black panel. The thing is brand new now. Good thing that you can still screw these open. The next models probably will be glued like phones, or snapped together.
Fixed my Samsung 55 inch 4k with this! Had white edges and white spots. Used epoxy as well but it was a little messy
But even tho there are white spots, cant the product still be used? Does it get worse over time?
Yes, you can continue using the TV and yes, the condition does get worse over time. Check out ruclips.net/video/xaaGEDHwwAg/видео.html LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen. Good luck! Thanks for commenting.
Where exactly did you GLUE the Diffuser Lenses to get them back in place without interfering with the LED in the middle of each one? I would have appreciated that small detail...Otherwise great video. Thanks for doing this Lawrence. JP
For additional gluing tips, please watch the companion video titled "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" at ruclips.net/video/xaaGEDHwwAg/видео.html Your question(s) are answered there. Thanks for asking!
What would happen if we accidentally touched the LED chip under the lens? Or potentially disrupted the phosphorus (yellow) film on them?
I don't think accidentally touching an LED would cause a problem. You have to touch failed LEDs to remove and replace them, something I've done many times, without ill effect. But, disrupting the phosphorus (yellow) film (not always present) might cause them to change color. That area of the display might turn blue as shown here: ruclips.net/video/8g3uQaNK0Jo/видео.html Thanks for asking! Sorry for the delayed answer. Your question did NOT appear in my YT notifications (censorship is terrible) and I just today, happened upon it. For what it's worth, seems like two reasonable questions to me!
What kind of glue to try the repair?
I use 5-minute epoxy. Please watch "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" and learn from my mistakes. It is very important to glue the caps square to the LED strips. I show what happens when you don't glue properly in this second, companion video. Good luck and thanks for commenting!
my samsung 42 curve has 2 bright spot looks like i must do this fix as well
Hello. I have the same problem with the Samsung UN48H6400 smart tv. Now I could have an idea about this problem. Thanks for your help.
Can crazy glue be used?
There are literally dozens of glue products to choose from at the hardware store. I haven't tried all of them (so I don't know if there's something better than HF 5-minute epoxy), but I have tried two different Krazy Glue products, HF Super Glue, Duco Medium Strength Polyurethane Plastic Model Cement and had no luck with any of them when used for this purpose. Please watch "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen" and learn from my mistakes. It is very important to glue the caps square to the LED strips. I show what happens when you don't in this second, companion video. Good luck and thanks for commenting!
Very useful thanks for your great support
did samsung fix this issue? If so, what model year/series? thanks
Best to ask Samsung whether they fixed (or even recognize) the issue. From comments left by others, it seems they haven't. Much newer OLED and curved-screen models suffer from the same problem. And, it's not just Samsung brand. It's an industry wide problem designed to make you "throw it away and buy another one."
@@LawrencePina wery well said about how industry works these days, I fixed 65inch (curved) Panasonic tv two years ago with the same problem, bloody 130 lens I had to glue back on, all were falling from the touch of finger 🥵
Brilliant😃😃😃😃😃
my Samsung is darker in the corners . can you give a hint what is wrong
My guess would be intermittently open LEDs in the corners. The corners start out dark but after a few minutes the intermittent LEDs may (or may not) switch ON restoring normal brightness. Samsung display panels are prone to that (especially at the top of the screen). My Samsung 55" had that problem. A friend's Samsung 65" also had that problem. I've seen it many times and it's only going to get worse. So, if you're so inclined, consider taking the TV apart and replacing just the affected LED strips at the top and bottom of the display. Good luck. Thanks for asking.
Can you use hot glue ?
You can. I wouldn't. Check the comments. People who have (used hot glue) say that it didn't work out very well. For additional gluing tips please watch ruclips.net/video/xaaGEDHwwAg/видео.html LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen. Good luck! Thanks for commenting.
Will any glue work?
Not really. Obviously the OEM glue doesn't last. Super glues don't work at all. Best to use Harbor Freight "Super strong quick setting epoxy" aka 5 minute epoxy. It's strong enough to hold the caps down, but not so strong that you can't twist them off again should you ever need to replace the LED. For additional, very important gluing tips, please watch ruclips.net/video/xaaGEDHwwAg/видео.html the companion video "LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen." Good luck. Thanks for commenting!
Thank you for the video. In wish I would not be fast forwarded through the reassembly though.
For additional take apart info and other helpful tips, please watch "LG 42LN5700 - 47 LN5400 LED TV Screen Repair Secrets" at ruclips.net/video/mW0OAYIRdqc/видео.html Good luck, and thanks for commenting!
I had purple spots on my 65 "panasonic it was the backlight strips
Same as the Tv shown in ruclips.net/video/8g3uQaNK0Jo/видео.html titled Dark Blue Picture? If so, please leave another comment under that video indicating whether you got your 65" fixed under warranty, whether you fixed it yourself, where you got the new LED strips, etc. Thanks for commenting. That's how we help each other!
@@LawrencePina No i Havnt had it fixed as the spots really only
Show when its z very light background,,,,,, plus the warranty has run out typical 😂👍🏼
I have similar problem but mine led lights didnt fall off and they are on top of each other when im warching the tv. If someone have an answer what is causing that I would appreciate thanks.
Even if the caps are still attached, they might not be square to the LED strips. Please watch LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen, ruclips.net/video/xaaGEDHwwAg/видео.html, for examples of this problem. If the diffuser caps have lifted even slightly, then you'll get bright cresents, halos and other scaring on the screen.
@@LawrencePina I will check it out thanks for your response and have a Nice day.
I had a hard time finding a glue that would work. Had to use a uv activated glue.
Going to wait for my taxes to hit and try this, just in case I break my current one 😂😂😂 I have two spots on mine that are driving me absolutely crazy.
In the meantime, consider watching ruclips.net/video/xaaGEDHwwAg/видео.html LCD/LED TV Repair Secrets - Evenly Spaced Spots on the Screen. It shows what happens when you ignore the problem and also offers additional gluing tips. Good luck! Thanks for commenting.
Good work