I put new gears and springs into mine, but it has been sitting in a drawer for a week. It is a very tough blaster to realign its nubs and parts! I need that video asap 😁
I am a new moder. My first blaster mod was a retaliator. Since the lock down I have had fun gazing and moding with good results. I also moded a rampage by putting two retaliator sprins combined together lubing the cylinder. Instead of getting 69 f/s it does an average of 140f/s that is amazing to me.
Really useful! The Retaliator / Recon / etc. is one of the blasters that I haven't ever owned or opened, but the principles for this and some other N-Strike blasters are the same. Excellent with the close-up photographs as well.
Tip: you can also use some tape to cover the screw holes, thus trapping them inside until you take the tape off, I like to use painters tape as it won't take off any paint
AWESOME VIDEO! Please continue this series! I'm bookmarking this for future reference, you description of the inner workings of the Retaliator are priceless and greatly appreciated.
Great teacher you are. Thrifted mine, thought it just needed the mag to un jam it, turns it there was a shaft of a small screwdriver , wedged between the slide and broad screw. I tried all the tricks until I saw it lol
great video Sir!!! I have a feeling that after a fair number of these videos are out that a lot of novice modders will get a wealth of knowledge from them. Bravo! Captain for adding another reason that You Sir....are awesome
I absolutely love this idea! I already use you K26 and other modifying videos to aid in the reconstruction of many a blaster I've opened and with too much haste disassembled so having a dedicated series would be amazing.
Something that just occurred to me- the handle dart storage could be used for de-priming a blaster with the locks still in. Once you take the magazine out, you could manually load that extra dart into the bolt and fire that dart after returning the slide.
OMG thank you so much, u legit saved my retaliator. I love it and when a little thing broke, i was in tears. I bought a new little thing and u saved my retaliator
Really really good in-depth video. You absolutely should this video series, because I would have loved to have this video when I was first exploring this blaster to get ready to mod it and as you mentioned the slingfire as well.
Digging this idea. Definitely hopes it continues. I would love to see one for Stryfe, as so many of the ones I've seen are so quick to gloss over things, esp. where/what locks to remove. Light modding, as opposed to changing motors and cages.
Thank you for this. My old blaster got jammed up horribly and had to take it apart just now. Couldnt get the two halfs apart till i saw this. Well done
I have a question, even though you said the plunger tube needs to move, I have taken out my bolt sled lock, and upgraded the spring. But now the tiny sticky out bits on the plunger tube have snapped, can I glue the plunger tube in place so that it doesn't move ALL the way forward next to the access door? If so, I'd glue it far back enough so the plunger head could catch. Thanks Captain.
Bought my son a bundle of used nerf guns for cheap and the reatliator was his favourite but after playing for 2 hours it Jammed. Thanks to your video I was able to completely disassemble lube and reassemble and now it works twice as well! Can't thank you enough , you made a little boy very happy
They expect us to have a sealed breach with expanded plunger tube kits. Huh. That explains a couple of things :D And I'm all for the series. 3rd edit: you have the centurion on the list! you are a brave man!
Well I couldn't watch the entire video since its midnight (disassembling it to clean in the midnight wasn't the brightest idea I had) and I had to reassemble as fast as I could but it was very helpful. Thanks for the video.
This is so handy, i took mine apart years ago dont know why and i could never get everything back together again working i will be able to do this now, thank you
Hi Cap! This is really a service to the community! This series I foresee becoming a reference material for modders everywhere. I have two Rampage blasters to put back together sitting in a bag for a long time. I have all the parts, but a tutorial on this one would be helpful.1 There is also another, a Vintage Blaster so it may not be popular enough for you to get to, but the Dart Tag speed load six. I am having a hard time figuring out the right steps to reassemble after removing an horrific jam. Thanks so much!
Beautifully done. Thank you Sir! I really like having this sort of detail when mucking with things, so I am able to put it back together more easily. I have a large panel magnet that I use when disassembling things, and I put screws onto that magnet in similar position to where it came out of the blaster, so I can put them all back where they came from more easily.
@@CaptainXavier Time lag while RUclips processes the video is a factor, too... Just because a video goes live for us to watch at 2 AM doesn't mean you didn't begin the whole process at 7 PM, right Captain?
When my friend got into modding nerf blasters I suggested he use the retaliator since in my opinion it's one of the better blasters for beginners to mod
Omg thanks 😂 I have modded before but usually flywheel. Also I usually do cosmetic kits. I never really practiced much with springers and I really want to so thanks for this video 🙏🙏🙏🥺😌. Have an amazing day
Looking forward to this series! This is an excellent service to the community and especially (but certainly not only for) noobs. And we all had been noobs at one time or the other!🤓☺
Amazingly helpful! bought a mod for a retaliator, but it did not come with instructions, this will give me a chance to understand where things go! thank you Captain Xavier!
I think this is an AWESOME idea for a series, Captain. You should definitely continue it. I'm terrified of opening up a blaster to try a mod for fear of not being able to reassemble the thing.
This may fall into the "I don't feel like doing it" category but I've never seen anyone do a proper centurion breakdown and reassembly. I opened one up once and there are so many things in there that I had no clue about their function. Possibly one of the most over engineered blasters of all time. Rob from SBNC (no longer in the nerf comunity) kind of did a mod guide but it was mainly based on a spring upgrade and barrel removal.
Another helpful tip I learned a while ago for keeping track of screws is to simply put a small piece of tape over each screw hole (after unscrewing them of course) to keep them in place if you need to flip over that side of the shell.
My favorite trick for keeping track of screws is to, before starting to remove screws, lay the blaster on a piece of cardboard and trace the outline. Then, as the screws come out, push them into your cardboard outline in approximately the location they came from. I've sort-of laminated my cardboard panels after using them by wrapping them in a full layer of Dollar Store packing tape, and the most-used ones (the Stryfe and Hammershot) have each held up to 10+ uses so far.
thanks this helped alot! im modding my retaliator rn and currently i have a 12kg worker spring, replace the o-ring, preparing it for the paint job and stuff and im planning on doing a brass breech and replacing the catch with a metal one because the spring is so strong that it just pushes the catch out of the way basically so yeah.
Gonna vote for the Rampage, because mine is not chambering darts correctly and is my understanding that this blaster is a little problematic, at least from what I read. I'm fairly new to modding, so I don't really know if that's true or not, but I was able to replace the stock spring to a stronger one. Anyway, I would like to see it taken apart.
I would love to see a rival Perses reassembly. Fully taking one apart to paint it is a plan that I have and an assembly video would be a valuable resource.
Slingfire; with Worker creating the metal bolt sled and plunger system and another creating the metal gear set it could be revisited about k26 possibilities at the highest conplicated modding level. Plus it's my first modded blaster lol
My Mercury's bolt got stuck halfway through priming, disengaging the lock via the button won't help. And the most confusing part is that it never jams when I use it, but when someone else uses the same blaster, it jams.
Love the series idea. I started modding after I took apart a speedloader 6 because of a jam and had to find a video of how to rebuild it. That lead me on to Dracs penny mods and then the whole world of modding. But those detailed internal builds dont seem to exist for modern blasters. Hopefully they will now.
Hey, great vid!! I have been taking Nerf Guns apart for some time now, but for this gun in particular, I can't seem to be able to put the two halves back together. Any fixes for this??
Yeah...figure out how to put the two halves back together. Not to be mean but it is clearly a user problem as many people are able to put it together with no problem. Something is probably misaligned or in wrong.
30 seconds in and i'm all for this idea having a series video to help reassemble would give new modders a huge hand in their projects
yes please do more!
غ٠طل٠كت
لكلمات
تانظةتثجههثخينيم
The Roughcut, so you can show the gear priming system, the two stage trigger, and the smart AR all at the same time.
I put new gears and springs into mine, but it has been sitting in a drawer for a week. It is a very tough blaster to realign its nubs and parts!
I need that video asap 😁
yes please, this would be exceptionally helpful
My rough cut doesn’t have a two stage trigger
Why didn't I think of that? 👀
I've bookmarked this so I can start hotlinking as required. Thank you for doing this :D
Yo horusrogue what up it's nerf boye
My Retaliator’s prime was stuck halfway for like 3 months before I fixed it. This would have come in handy
i broke my plunger and managed to replace it with a 3d printed one, i managed to bypass the back part taht keeps it in somehow
how did u fix it bc i watched this vid but it got stuck at the end
yeah same
I am a new moder. My first blaster mod was a retaliator. Since the lock down I have had fun gazing and moding with good results. I also moded a rampage by putting two retaliator sprins combined together lubing the cylinder. Instead of getting 69 f/s it does an average of 140f/s that is amazing to me.
Really useful! The Retaliator / Recon / etc. is one of the blasters that I haven't ever owned or opened, but the principles for this and some other N-Strike blasters are the same.
Excellent with the close-up photographs as well.
Tip: you can also use some tape to cover the screw holes, thus trapping them inside until you take the tape off, I like to use painters tape as it won't take off any paint
AWESOME VIDEO! Please continue this series! I'm bookmarking this for future reference, you description of the inner workings of the Retaliator are priceless and greatly appreciated.
Thanks so much! Really helped me when I modded it, even all these years later! Good job!
Thanks for doing this this series is going to be really helpful
Dude this helped so much! I wanted to open my retaliator and started panicking whilst putting it back together, and this really helped!
Thank you, very helpful and much appreciated.
Great teacher you are. Thrifted mine, thought it just needed the mag to un jam it, turns it there was a shaft of a small screwdriver , wedged between the slide and broad screw. I tried all the tricks until I saw it lol
great video Sir!!!
I have a feeling that after a fair number of these videos are out that a lot of novice modders will get a wealth of knowledge from them.
Bravo! Captain for adding another reason that You Sir....are awesome
Nothing like helpful nerf content. Bless you sir.
I absolutely love this idea! I already use you K26 and other modifying videos to aid in the reconstruction of many a blaster I've opened and with too much haste disassembled so having a dedicated series would be amazing.
Something that just occurred to me- the handle dart storage could be used for de-priming a blaster with the locks still in. Once you take the magazine out, you could manually load that extra dart into the bolt and fire that dart after returning the slide.
OMG thank you so much, u legit saved my retaliator. I love it and when a little thing broke, i was in tears. I bought a new little thing and u saved my retaliator
Thank you so much, I took apart my gun to custom paint it and I couldn’t figure out how to put it back together
I know im not gonna mod my brand new Sonic ICE Retaliator soon, but juuuuuust in case it breaks, a monday mod tip can save my blaster's life
Really really good in-depth video.
You absolutely should this video series, because I would have loved to have this video when I was first exploring this blaster to get ready to mod it and as you mentioned the slingfire as well.
Whenever I move the barrel back it snaps up toward where the other half would be how do I fix it
Once again, thanks for this, had a weird little issue, this helped. I’ll just be annoyingly saying thanks to these year old videos for years to come.
Thank you for your thorough instructional video saving me a whole lot of cursing and time!
Digging this idea.
Definitely hopes it continues.
I would love to see one for Stryfe, as so many of the ones I've seen are so quick to gloss over things, esp. where/what locks to remove. Light modding, as opposed to changing motors and cages.
Thank you for this. My old blaster got jammed up horribly and had to take it apart just now. Couldnt get the two halfs apart till i saw this. Well done
There's honestly so much engineering that goes into such simple functions.
Thanks this is going to be helpful
I have a question, even though you said the plunger tube needs to move, I have taken out my bolt sled lock, and upgraded the spring. But now the tiny sticky out bits on the plunger tube have snapped, can I glue the plunger tube in place so that it doesn't move ALL the way forward next to the access door? If so, I'd glue it far back enough so the plunger head could catch. Thanks Captain.
Hands down one of the best and most descriptive repair video ever thanks
Bought my son a bundle of used nerf guns for cheap and the reatliator was his favourite but after playing for 2 hours it Jammed. Thanks to your video I was able to completely disassemble lube and reassemble and now it works twice as well! Can't thank you enough , you made a little boy very happy
They expect us to have a sealed breach with expanded plunger tube kits. Huh. That explains a couple of things :D
And I'm all for the series.
3rd edit: you have the centurion on the list! you are a brave man!
Well I couldn't watch the entire video since its midnight (disassembling it to clean in the midnight wasn't the brightest idea I had) and I had to reassemble as fast as I could but it was very helpful. Thanks for the video.
Thank you brother I just reassembled by retaliator
thank you SOOOOO much, my Retaliator was jammed, and I have found the problem because you showed my how to reassemble it. THANIKS
Bruh this is epic but we need a jolt guide
Kronos reassemble can be a pain especially because things inside tend to sproing more than most springers, and the interior feeder is cool
This is so handy, i took mine apart years ago dont know why and i could never get everything back together again working i will be able to do this now, thank you
very helpful. I thought I'd never get that back together!
Thank u so much, i needed a guide to reassemble it!
Words can’t describe how much you’ve helped me
Thanks for the heart, big fan
Hi Cap! This is really a service to the community! This series I foresee becoming a reference material for modders everywhere. I have two Rampage blasters to put back together sitting in a bag for a long time. I have all the parts, but a tutorial on this one would be helpful.1 There is also another, a Vintage Blaster so it may not be popular enough for you to get to, but the Dart Tag speed load six. I am having a hard time figuring out the right steps to reassemble after removing an horrific jam. Thanks so much!
Thank you, this was really helpful. My son was able to reassemble his blaster!
Beautifully done. Thank you Sir! I really like having this sort of detail when mucking with things, so I am able to put it back together more easily. I have a large panel magnet that I use when disassembling things, and I put screws onto that magnet in similar position to where it came out of the blaster, so I can put them all back where they came from more easily.
Two words from someone with a broken old retaliator (my fav nerf gun): THANK YOU
thanks for helping i havent use my reteliator for 2 years cause an bullet stuck inside im so thankful i saw this vid:D
uploads a video at the middle of the night
Timezones are a thing you know...
@@CaptainXavier Time lag while RUclips processes the video is a factor, too... Just because a video goes live for us to watch at 2 AM doesn't mean you didn't begin the whole process at 7 PM, right Captain?
You saved my Retaliator, thank you, it's my only blaster
The video started, I could not hear any sound. Upped the volume, then the captain slammed the blaster on the bench and scared me sh*tless. 🤣
When my friend got into modding nerf blasters I suggested he use the retaliator since in my opinion it's one of the better blasters for beginners to mod
Thank you so much ! Managed to fix my son's blaster 😀
Omg thanks 😂 I have modded before but usually flywheel. Also I usually do cosmetic kits. I never really practiced much with springers and I really want to so thanks for this video 🙏🙏🙏🥺😌. Have an amazing day
Looking forward to this series! This is an excellent service to the community and especially (but certainly not only for) noobs. And we all had been noobs at one time or the other!🤓☺
Amazingly helpful! bought a mod for a retaliator, but it did not come with instructions, this will give me a chance to understand where things go! thank you Captain Xavier!
Thanks. I’ve just repaired one with your help. 👍
We definitely need more of these.
I think this is an AWESOME idea for a series, Captain. You should definitely continue it. I'm terrified of opening up a blaster to try a mod for fear of not being able to reassemble the thing.
Thank you for the help, I had no clue how to reassemble it without your help. Keep up the good work!
You helped me fixed my retaliator your a hero to me keep up the good work and thank uou
This may fall into the "I don't feel like doing it" category but I've never seen anyone do a proper centurion breakdown and reassembly. I opened one up once and there are so many things in there that I had no clue about their function. Possibly one of the most over engineered blasters of all time. Rob from SBNC (no longer in the nerf comunity) kind of did a mod guide but it was mainly based on a spring upgrade and barrel removal.
This vid is so helpful. I could not get my retaliatory to work until I watched this vid
Another helpful tip I learned a while ago for keeping track of screws is to simply put a small piece of tape over each screw hole (after unscrewing them of course) to keep them in place if you need to flip over that side of the shell.
My favorite trick for keeping track of screws is to, before starting to remove screws, lay the blaster on a piece of cardboard and trace the outline. Then, as the screws come out, push them into your cardboard outline in approximately the location they came from.
I've sort-of laminated my cardboard panels after using them by wrapping them in a full layer of Dollar Store packing tape, and the most-used ones (the Stryfe and Hammershot) have each held up to 10+ uses so far.
13:51 If when priming you hold down the trigger, prime it back *then* release the trigger it will not activate the slide lock until you finish priming
Rival Apollo! The only Nerf blaster that I can't get back together. It's like it's missing a gear, but photos look right.
Ah super helpful! Thank you so much for taking the time to make this video, a life saver'
thanks this helped alot! im modding my retaliator rn and currently i have a 12kg worker spring, replace the o-ring, preparing it for the paint job and stuff and im planning on doing a brass breech and replacing the catch with a metal one because the spring is so strong that it just pushes the catch out of the way basically so yeah.
thank you soooooo much captain, you saved my retaliator
Great instructional video!!! Thank you. This helped me with a couple of issues where I previously had trouble with my Retaliator. Well done, sir!
Thank you, this was soo useful that I even managed to even fix my nerf gun,
Thank you lad
This would have been supremely helpful when i started modding, its a fantastic series.
Thanks bro you saved me tons of time. Great video. Keep up the good content!!!!
Gonna vote for the Rampage, because mine is not chambering darts correctly and is my understanding that this blaster is a little problematic, at least from what I read. I'm fairly new to modding, so I don't really know if that's true or not, but I was able to replace the stock spring to a stronger one. Anyway, I would like to see it taken apart.
Great video. Helped me fixed my son's Xmas gift.
Glad I could help!
Thanks, just fixed and modded my retaliator because of this vid
Thank you so much i couldnt figure out what the fUCK that little black piece from the handle was forever
I think these are immensely useful videos for new modders and the right ones might actually get me to try. I vote slingfire if that helps.
Spring? What spring!
my retaliator broke n im12 so this happed me take it apart then put it back together and it worked thanks so much!!!
I would love to see a rival Perses reassembly.
Fully taking one apart to paint it is a plan that I have and an assembly video would be a valuable resource.
Excellent video, this helped me fix my son's gun.
Thank you soooooo much ypou saveed my life and my Retaliator for ine singular shot.
very helpful for my hydro dipped damascus camo type Retaliator
thank you dude, made my retaliator unprimable to detach mag!
Thanks! I have a modulus rekon mk3 and i had troubles putting it back together. Looks exactly the same internally.
Awesome video!
I’ve also liked the Retaliator but now, dang this is 🔥 😎👍
Slingfire; with Worker creating the metal bolt sled and plunger system and another creating the metal gear set it could be revisited about k26 possibilities at the highest conplicated modding level. Plus it's my first modded blaster lol
My Mercury's bolt got stuck halfway through priming, disengaging the lock via the button won't help. And the most confusing part is that it never jams when I use it, but when someone else uses the same blaster, it jams.
Thx this video helped me get out a big screw for door locks
So thx
Love the series idea.
I started modding after I took apart a speedloader 6 because of a jam and had to find a video of how to rebuild it. That lead me on to Dracs penny mods and then the whole world of modding.
But those detailed internal builds dont seem to exist for modern blasters. Hopefully they will now.
Thank you for this I’ve been having troubles with this gun I think this could be a helpful series
Thank you so much it helped me fix my blaster😅
I unseized my retaliator using this. Thanks
Removing the magazine lock is necessary for an angel breech.
Yo thank you so much for making this nice and helped me a ton when I started modding blasters
Thanks for this! Much needed
I would like to see a strong arm personally but with this kind a series ya never know when ya need to reassemble something
This was so useful my white retaliator was broken and I used my other broken blue retaliator and this worked
OMG thanks so much this helped so much !
Hey, great vid!! I have been taking Nerf Guns apart for some time now, but for this gun in particular, I can't seem to be able to put the two halves back together. Any fixes for this??
Yeah...figure out how to put the two halves back together. Not to be mean but it is clearly a user problem as many people are able to put it together with no problem. Something is probably misaligned or in wrong.
Thank you very much, this is very helpful 🔥
What size are the small main screws? I need some replacements.
i think this reassemble videos are very helpful. do a reassembly on the mediator and a longstrike
I am pretty sure those are both on the survey. Be sure to vote for them.