I had the same disappointment thinking the VS and VZ would take the same upgrades on the same screw points. The only consolation is I like the GR Yaris
1 it's illegal in b-max, tuned, box stock and pro stock, 2thr motor and gear catch support interferes withe the rear set up and the car shell, 3the motor won't move after you insert the batteries.
Thanks for sharing, Roy. I'm so suprised that Tamiya released a new chassis with those problems in year 2020. By the way, can the matel motor cooler for super 2 to be used on VZ in order to fix the position of the motor? Thanks.
Hard to say if its really a problem or not unless you showed a video where the alleged problem occurs while running right? but if the car runs smoothly then there's no problem in the first place.
Those aren't issues, but features! The focus of VZ is flexibility and you have just removed a lot of it.
the number 1 problem of VZ is the fragility of the sidestay
Put the batteries and its solved. Used to race using this chasiss and got no issue 😉
Batteries solve the problem
Thank you so Much, very helpful video, btw for the rear motor support is it strong enought just to put the standard FRP, not the carbon one.
Thanks for solution
the screw hole of gear cover is easy to loose
I had the same disappointment thinking the VS and VZ would take the same upgrades on the same screw points. The only consolation is I like the GR Yaris
1 it's illegal in b-max, tuned, box stock and pro stock, 2thr motor and gear catch support interferes withe the rear set up and the car shell, 3the motor won't move after you insert the batteries.
Awesome idea. Have to find a way for tuned class since no cutting allowed of carbon in tuned
Sam Nacino I will try to think about any way can make it works on tune class
Without those supports you added, is it noisy when you turn it on?
Thanks for sharing, Roy. I'm so suprised that Tamiya released a new chassis with those problems in year 2020. By the way, can the matel motor cooler for super 2 to be used on VZ in order to fix the position of the motor? Thanks.
Big J Mini 4wd I don’t think it’s gonna fit
I wish i can do that, and not be disqualified..
Hi Roy. Have you tried to use the regular motor cover if it will lock in the motor from moving?
I have try that in the video
Plis make super fm
Hard to say if its really a problem or not unless you showed a video where the alleged problem occurs while running right? but if the car runs smoothly then there's no problem in the first place.
The multi roller stay trick does not apply for basic tuned. Any ideas for that class? Ty
Then just use the that plastic motor support come with the kit. That works fine
@@arenamini4wdclub968 OK thanks
I really hope they do a reinforced version of this to take care of these issues
Dillon Buttner ya. Ya hope they will know it
@@arenamini4wdclub968 just reinforced parts A pack might be enough 😉
Still same problems from Vs chassis
It is better if you use regular frp and cut it
As long as it works. That’s most important
Will the aluminum motor support work for the rear motor and gear cover?
www.tamiya.com/english/products/15149/index.htm
No plus motor support..please solution.
Check video 6:45
My problem: no replacements
😨⁉️❓
@@arenamini4wdclub968 in my country there is no replacements only ma and mz,ths only solution is to buy a new car not a new chassis
To much problm,my solution is tamiya should replaced their R&D division and hired the better one.
I will never understand why Tamiya make same errors on all new chassis..
Cause they like to leave some errors for us to get it correct by ourselves, I think 🤔！！！ 🤣👍
@@arenamini4wdclub968 got it 🤣,
I guess with out issues new Chassis runs too fast.
Will the aluminum motor support work for the rear motor and gear cover?
www.tamiya.com/english/products/15149/index.htm