📷 Give this a shot, tag me on facebook and instagram with your results! 🔨 If you need a recommendation on a heat gun, here's a good one: amzn.to/30tZ5gO
I would suggest leaving an inch or two of the pool noodle beyond the end of the PVC pipe for the fist to minimize any weird accidents from the end of the pipe (I've seen hands get cut from the inside edges!) Another Idea, which I used to do on dummies I made long ago, was to figure a way to mount tennis balls for hands for specific targeting of those. I used thin fiberglass rods to mount those. I suppose if the noodle were cut shorter than the PVC, a tennis ball could be drilled out to fit on that pipe directly.
Just tried making this. I ended up heating up sand and put it into the tubing. Capped each end off with Gorilla duct tape. The pipe will become limp and you can work with it. Be very careful though, the pipe will be VERY hot , so make sure to wear gloves. Also, I found it very beneficial to have someone helping me with some ice cold water to cool down the parts Im wanting to bend, so it stays in the shape. I also had to use some bungee cords to help keep everything into position while it cools long term. I ended up using cold water from the water hose to finalize it quicker. No easy way to do it, but this is such a great , cheap idea! Thanks for this video!
Great idea and thanks for being so considerate in thoroughly breaking down all the steps involved. I’ve viewed other impressive DIY videos for putting arms on a BOB but this is the best yet. Thanks again. Much appreciated! 😎
You Sir are a genius. I have been considering different ways to make a wooden dummy. After class tonight, I considered going with a Bob Versys as we covered some unique inside leg kicks. But then I read the reviews for it on RUclips. That would have been a huge and expensive mistake. I practically gave my original Bob years ago, but may just pick up another. In the mean time, I can absolutely do this on my existing heavy bag. Thanks again. BTW. Nice throat punch and closing kick!
Nice design and thanks for sharing. 5 years ago I did something similar but I was able to expose the carotid artery to practice striking that area. I think you should modify the fitting it to expose that artery.
had all the right material and tried doing this today and boy, did it go wrong. I accidentally scorched the fabric on a chair that was on the other side of the heat gun. Once i got the pvc pretzel'ed around BOB's neck i continued to heat sections and quit while i was ahead. I felt like i was going to damage the BOB. i pulled it off and tried to heat and put it back on and contour but it was getting off course. I first put sand throughout the pipe, thinking that would help maintain some shape and it wouldn't crease so drastically. With sand it was taking so long to heat up. I emptied it and it went faster. Wish i could finish it safely but at the rate i was headed i was going to damage something else. The pipe discolored in one area i held the gun too long. I have a feeling, after a short while it would start cracking. I'm looking at some other options that assemble sectional pieces so i can ditch the heat-gun approach. Wished i could have finessed it better.
Cool DIY video to add arms which is more effective to train with. Still debating IF I should purchase Versys vs Bob or Bob XL because the former is more EXPENSIVE but has extra features than the latter which is already expensive. Notice Bob XL is more DURABLE to absorb the blows/hits from weapons, punches n kicks. Kudos for ur video.
The only problém with this aren't the arms ...the base is the important thing on the versys Bob... not just the arms ... I find arms being just a side benefit ... but the base for low kicks,stability and portability is the key on the versys .
Very cool. I want my BOB to have arms too. I like what you’ve done, but any thoughts on a design that doesn’t have the PVC across the front of the neck?
Not so far. I needed a way to be able to provide downward leverage on the arms so I needed a support from above the shoulders. I’ll keep thinking though. If you try this, let me know how it goes!
Thanks for clarification on this. I was initially thinking that you were going to somehow put the PVC pipe actually through the body of the BOB dummy, having it exit out where the arms would be. What you are doing does indeed save the dummy from any permanent damage. However, how would you practice hitting or target the throat or neck on the dummy with that PVC frame blocking those target, and not damage or injure your hands?
@kenfuTV great video, I’ve been wanting to do this for a long time, but I’m wanting arms that have realistic, articulating joints. Any ideas? What size PVC pipe did you use?
A bit of an update on this. I used a 1" schedule 40 PVC for this. It did eventually crack under regular use. Having something to absorb the flexing of the arms would probably help. When you say articulating, are you looking for something that bends at the joints when you work with it, so something posable?
@@kenfutv Yes, so an individual could practice wrist locks on a standing dummy. It wouldn't necessarily have to be posable (i.e. retain whatever position you put it in), but that would be ideal. It would just have to have realistic arm joints with full range of motion.
Throatpunch Thursday sounds legit! I seen a few diy arms for century bobs and this is by far one of my most favorite! If I recreate this ill tag ur info in the video. I have done a few century bob videos on my channel too
Note, there is no such thing as a "gi". For instance, it is -"ki" as a suffix and if a prefix is added, as is required, it becomes '-gi". The correct terms are kimono (with -ki as a prefix), dogi, kawrawtehgi, jujutsugi, aikidogi, etc. All -ki means is clothing so there is no such thing as "a gi/ki".
📷 Give this a shot, tag me on facebook and instagram with your results!
🔨 If you need a recommendation on a heat gun, here's a good one: amzn.to/30tZ5gO
Hot water pipe insulation for throat section.
I would suggest leaving an inch or two of the pool noodle beyond the end of the PVC pipe for the fist to minimize any weird accidents from the end of the pipe (I've seen hands get cut from the inside edges!) Another Idea, which I used to do on dummies I made long ago, was to figure a way to mount tennis balls for hands for specific targeting of those. I used thin fiberglass rods to mount those. I suppose if the noodle were cut shorter than the PVC, a tennis ball could be drilled out to fit on that pipe directly.
Just tried making this. I ended up heating up sand and put it into the tubing. Capped each end off with Gorilla duct tape. The pipe will become limp and you can work with it. Be very careful though, the pipe will be VERY hot , so make sure to wear gloves. Also, I found it very beneficial to have someone helping me with some ice cold water to cool down the parts Im wanting to bend, so it stays in the shape. I also had to use some bungee cords to help keep everything into position while it cools long term. I ended up using cold water from the water hose to finalize it quicker. No easy way to do it, but this is such a great , cheap idea! Thanks for this video!
Awesome! Thanks man. I will be doing this, this weekend.
Great idea and thanks for being so considerate in thoroughly breaking down all the steps involved. I’ve viewed other impressive DIY videos for putting arms on a BOB but this is the best yet. Thanks again. Much appreciated! 😎
Great idea. Wonder if we could set up a pair of legs for Bob?
Why have i only just come across. Amazing and so simple
Great idea I’m definitely going to give this a go. Thank you.
You Sir are a genius. I have been considering different ways to make a wooden dummy. After class tonight, I considered going with a Bob Versys as we covered some unique inside leg kicks. But then I read the reviews for it on RUclips. That would have been a huge and expensive mistake. I practically gave my original Bob years ago, but may just pick up another. In the mean time, I can absolutely do this on my existing heavy bag. Thanks again. BTW. Nice throat punch and closing kick!
You are awesome....loved this video....you did an amazing job explaining and making it look really simple....
YES thank you!! Needed that vid! gonna get a bob century soon and wanted to make it as optimal as possible!
Greetings from the UK.
Exactly what I need. Thank you Sir 👍👍
Nice design and thanks for sharing. 5 years ago I did something similar but I was able to expose the carotid artery to practice striking that area. I think you should modify the fitting it to expose that artery.
Brilliant. Kudos!
Wow!
Solid video . Nice job Bro! Thank you.
had all the right material and tried doing this today and boy, did it go wrong. I accidentally scorched the fabric on a chair that was on the other side of the heat gun. Once i got the pvc pretzel'ed around BOB's neck i continued to heat sections and quit while i was ahead. I felt like i was going to damage the BOB. i pulled it off and tried to heat and put it back on and contour but it was getting off course. I first put sand throughout the pipe, thinking that would help maintain some shape and it wouldn't crease so drastically. With sand it was taking so long to heat up. I emptied it and it went faster. Wish i could finish it safely but at the rate i was headed i was going to damage something else. The pipe discolored in one area i held the gun too long. I have a feeling, after a short while it would start cracking. I'm looking at some other options that assemble sectional pieces so i can ditch the heat-gun approach. Wished i could have finessed it better.
Thanks for this!!
You bet!
great idea
good video, greetings from Mexico
Thank you!🙏🏼
I love this idea but don't like the pvc around the neck. You think a person could take it around the back and use a rachet strap or 2?
Hmm, interesting. This gives me a few ideas.
@@kenfutv let me know how it works if you start messing with it
Great job, thanks for sharing
Thank you! Cheers!
Great 👍 job thank you
Awesome!
Cool DIY video to add arms which is more effective to train with. Still debating IF I should purchase Versys vs Bob or Bob XL because the former is more EXPENSIVE but has extra features than the latter which is already expensive.
Notice Bob XL is more DURABLE to absorb the blows/hits from weapons, punches n kicks. Kudos for ur video.
The only problém with this aren't the arms ...the base is the important thing on the versys Bob... not just the arms ... I find arms being just a side benefit ... but the base for low kicks,stability and portability is the key on the versys .
Thank you bro
Very cool. I want my BOB to have arms too. I like what you’ve done, but any thoughts on a design that doesn’t have the PVC across the front of the neck?
Not so far. I needed a way to be able to provide downward leverage on the arms so I needed a support from above the shoulders. I’ll keep thinking though. If you try this, let me know how it goes!
Thanks for clarification on this. I was initially thinking that you were going to somehow put the PVC pipe actually through the body of the BOB dummy, having it exit out where the arms would be. What you are doing does indeed save the dummy from any permanent damage. However, how would you practice hitting or target the throat or neck on the dummy with that PVC frame blocking those target, and not damage or injure your hands?
How many feet total is the PVC pipe? Sorry if I missed it on the video
The starting length was about 9 feet
@kenfuTV great video, I’ve been wanting to do this for a long time, but I’m wanting arms that have realistic, articulating joints. Any ideas? What size PVC pipe did you use?
A bit of an update on this. I used a 1" schedule 40 PVC for this. It did eventually crack under regular use. Having something to absorb the flexing of the arms would probably help. When you say articulating, are you looking for something that bends at the joints when you work with it, so something posable?
@@kenfutv Yes, so an individual could practice wrist locks on a standing dummy. It wouldn't necessarily have to be posable (i.e. retain whatever position you put it in), but that would be ideal. It would just have to have realistic arm joints with full range of motion.
Perfect. Just perfect. You've saved me $$$$$$$&&&&&
Throatpunch Thursday sounds legit! I seen a few diy arms for century bobs and this is by far one of my most favorite! If I recreate this ill tag ur info in the video. I have done a few century bob videos on my channel too
#throatpunchthursday
Was Thursday a few hours ago actually
Awesome instructional, hoping to execute a similar arming of my Bob.
Perhaps a spray bottle of water would help cool the plastic quicker?
Lol You transformed mister Bob into ninja Bob Haha
That is very cool Ken. Love it 👍 #throatpunchthursday
Will heating the pipe while wrapped around Bob effect the coating or material Bob is made off
Depends on how hot you get it. If you go slow and don’t stat in one place too long you should be okay. Just keep an eye on the surrounding area.
That there is Bob lesnar brother
He looks more like the Ring General WALTER!
Ah very resourceful 👍
#throatpunchthursdays
How about putting boxing gloves on his arms to make it more realistic?
You could do that!
#throwpunchthursdays😁👍
Note, there is no such thing as a "gi". For instance, it is -"ki" as a suffix and if a prefix is added, as is required, it becomes '-gi". The correct terms are kimono (with -ki as a prefix), dogi, kawrawtehgi, jujutsugi, aikidogi, etc. All -ki means is clothing so there is no such thing as "a gi/ki".
It's a dummy with some bits of old pipe sticking out of it . It's a git 😀
#throatpunchthursdays