Pinterest inspired Diy industrial pipe curtain rods || Diy curtain rod || TwisaB

Hi guys in this video i am sharing with you pinterest inspired industrial pipe curtain rods. I wanted to do this project for so long and finally got time to do it.
Supplies list :
✅1/2” * 12” black steel pipe *2 www.homedepot....
✅1/2” black elbow * 2 www.homedepot....
✅1/2” * 2” steel pipe nipple * 2 www.homedepot....
✅1/2” black floor flange * 2 www.homedepot....
✅1/2” black cap * 2 www.homedepot....
✅8 screws
✅Black spray paint
Please follow me on instagram 👉 ...
Please follow me on Facebook 👉 / twisab11-104034474540320
Please support me by subscribing to my channel!!
Thank you!
#diycurtainrod

[@BigBill317]

Looks terrible

[@andrewchapman5659]

lmao yeah you got to go all the way across and put in the supports along the way.

[@JugglerLou]

I would attach all the pieces together to check on how much threading is used and how much is exposed. I would mark it in black or whichever color you are using, then take apart the pieces and put painters tape on the threads that go into the hardware. This way the threads aren’t tacky when you need them to go in smoothly.

[@twisab7179]

Good idea... Thank you 😊

[@daniellee4075]

Thank you for sharing this video and for including the list of items purchased! If you can post links that would be really helpful for others. Thanks!

[@twisab7179]

Thank you!! i will post links soon 😊

[@twisab7179]

Hi i did post links. Thank you so much for suggestion!! 😊

[@briandecasa5444]

What do you think is the weight capacity? I'm concerned more about the left facing pipe since if it's heavy enough it might loosen the elbow

[@twisab7179]

I hanged light weight curtain and it’s fine didn’t not loosen the elbows.

[@johnathanbennett6260]

What size screws did you use to fasten the flanges to the wall? Just did the same set up with inch and a half screws in all 8 screw holes but unsure it will hold.

[@johnathanbennett6260]

I did the same set up with 1 and a half inch screws in the fringes but unsure if they will hold up.

[@kendalgee5808]

i used a copper pipe because it's a lot lighter. If you're going to be using heavy pipes for a drapery rod, I would suggest in my non-professional opinion
Using wall anchors. If people hang TVs with multiple wall anchors, you should be OK and just check the weight rating for the wall anchors

[@dennissmeltzer4394]

Words are good things.

[@twisab7179]

Thank you 😊

[@johnathanbennett6260]

What screws did you use in the flanges?

[@whodat3444]

VERY creative👍🏽

[@twisab7179]

Thank you 😊