Lenovo G580 Disassembly / FAN Cleaning
HTML-код
- Опубликовано: 30 сен 2024
- Lenovo G580 Disassembly / FAN Cleaning
Discord - invite.itjungle.eu
If you have any questions, regarding Laptop repair and etc. you can join and ask for help.
Like and subscribe if you like the video.
More videos: / @laptopdisassembly
![Tee Grizzley - Blow for Blow (feat. J. Cole) [Official Video]](http://i.ytimg.com/vi/wNLN5xsx5dc/mqdefault.jpg)
Discord - invite.itjungle.eu
If you have any questions, regarding Laptop repair and etc. you can join and ask for help.
Thank you for the video. I cleaned the fan, changed thermal paste, and replaced the hard drive with a SSD.
This video should be called: How I did survive a heart attack? Thank you, it was very thrilling!
Thank you for this video, i took mine apart, cleaned up fan put new thermal paste. Once i put it back together it no longer turns on, the LED still lights up when plugged in. I think the ribbon cable near the fan, upper left at 4:25 is not fully in, tried but can't seem to get it fully inserted, any tips?
It is the power button cable. Check is there any bend pins on it. If yes, you can cut it a little. Otherwise just push it Inside all the way. You can test without the cable by shorting first two pins with tweezers.
where is the battery bios? i cant find it !!!
Replaced top and bottom plastics on my Girlfriend's laptop using parts from a dead G580. This video was very helpful and now I am a hero! Thanks :-)
Glad thw video was helpful for you.
What thermal paste would you recommend?
I use Arctic MX-2 or MX-4
Thank you. I have the Lenovo B580, which is very similar to the G model. Your video helped me very much. Disassembled it, cleaned it, replaced the thermal paste, put it back together. Works like a charm. The differences are with the connectors and the fan. My fan only has a heatsink for the CPU. Even after 9 years of use, the computer is still going strong and there even wasn’t a lot of dust on the fan grills…seems that the computer is designed quite well, especially regarding the air filters on the case.
I have Lenovo G 580 . Some time fan making huge noise and struck and laptop heating more . What I have to do?
Probably there is a lot of dust in it.. Did you disassemble it and clean it.. If not you have to do it.
lenovo G580 start problem, no power led, clicking noise with battery, no sound with power cable and no battery, power jack cable is ok. What might be the possible cause
Can be from a lot of things. No power led can be a bad bios or a faulty super IO. The clicking sound can be from a short on the battery section. Try reseting the bios first.
I made everything same but I have trouble with wifi I checked but it doesn't work now
Do you see the wifi card in the device manager. Also do you see any networks or none. Check the enable key Fn+ to enable the wifi.
Question is there actually 2 ram slots? cause mine says 1 out of 4 but when i opened it i only saw 1 ram slot
Edit: I have a lenovo g580 20157
All depend of the revision of the board and the region where it spouse to be sold...
Thank you very much
I got a problem while connecting cable the blue colour came in hand now it is lose how could I paste the blue colour tag with the cable and connect it pl explain
You can use double sided type to keep it in placr and put back in the connector
Am about to do same on my laptop i have questions
After cleaning the fan or replace it should i clean cpu thermal paste and put new one ?
After assembling parts back should i run computer normal or must do something in bios !? Pls help because am about to actually replace fan and upgrade cpu from i5 to i7
Yes you have to replace the thermal paste when you ckean the laptop. The thermal paste have about 2 years of working live, after that it hardens and it is not working ok. Just replace the paste and use normally, no need to do something in bios.
I have one like it, the fan is spinning, the screen is black. I added the ram and fun and it did not work. The black screen problem remained
You have problem either with bios, or bad VGA card.
@@LaptopDisassembly Can I fix it on my own or take it for maintenance?Because it contains my peculiarities and I fear
@@admiralreg
1. If it is BIOS problem, you need a programmer to flash the bios. Which means maintenance.
2. If is a VGA problem there is 2 options. A temporary fix that you can do by your self. Use a heat gun of a hair dryer and heat the vga chip ( it is next to the cpu. The cooler is sitting on it) for lets say 30sec. After that reassemble and test. If you want a permanent fix the chip have to be replaced and this also called for maintenance. You can try the temp way just to be sure where is the problem. I can bet the problem is the VGA chip. But if you will disassembly it, replace the thermal paste before reassembly.
@@LaptopDisassembly Thank you very much, I wish you success 🌹🥰
I pulled mine apart to clean the fan and then put it back together.
It now boots but there is no power to the screen and it's blank. I don't recall touching anything to do with the screen. Any idea as to why it is not working? Any help is greatly appreciated.
Do you have picture on external monitor. Also try to re plug the memory and lcd cable.
@@LaptopDisassembly Yes external is fine. I will open again tomorrow try LCD cable. This cable near fan?
Yes the flat one... Plug it good
While disambling I pulled a ribbon conector now connector broken. Mother board not getting power supply. How I can repair ribbon conector?
Send a photo of the broken place.. How can i help when i dont know what exactly is broken.
@@LaptopDisassembly do you have instagram to send photos
No yankogoshev@gmail.com
@@LaptopDisassembly I already sent pictures
Email-id not found
dose the lenovo g580 have a bios battery??? am haveing a problem finding it ...... please respond
Tell me the board model. The battery can be soldered to the board. Usually it is in a blue type...
@@LaptopDisassembly
I just read in the back side .. model name : ( some chinees word ) 20150
S/N : Cb20013451
MO : cb02112722 factory ID prc4
I hope thats all info you need to know the battery tabe
@@LaptopDisassembly
I'll wait for your respond
I will check and write back after an hour. I'm not in the office now
@@ibroo_4761 Look in the video in 8:10. On the right side of the HDD place. it is in a blue ring and it is soldered to the board.
Hello, thank you very much for your tutorial. I have done all the steps and finally clean the fan and changed thermal paste. But now I have a problem, the caps lock led light does not turn on. What did I do wrong? Can you help me? thank you very much!
What do you mean by that. The laptop is working fine and the keyboard is working, only the caps lock is not working properly. Or the hole keyboard is not working.
@@LaptopDisassembly the keyboard is working ok. I cant see the led indicator on the front .
The caps lock or the power led indicators... Im a bit concerned. Can you show me a photo of it.
@@LaptopDisassemblyWhen I pressed the Caps Lock key, a white LED light came on in front of the laptop but now i cannot see the light
Ok but douse the caps lock works properly. If the problem is the light itself can be damaged during the disassembly or if it is with flex connection, can be bad or not connect cable.
Where are u from?
Не си ли личи по "перфектният" английски. :)
@@LaptopDisassembly всичко е точно!