Few pointers to anyone doing this on a slightly different corolla (eg ZRE182) - assembly looks very similar but there are some differences to be careful with: There are far more internal clips on the mirror cover piece on those cars - going slow with a plastic tool is going to give you a much cleaner finish than going fast with a metal screwdriver! You'd be well advised to unscrew the mirror motor to get access to the clips of the indicator assembly (behind the mirror) rather than attempting to just lever it out with the key. It will not "pop out" as easily as the one shown in this video, and you're likely to break plastic if you force it. 3 Phillips Head screws, and then something to lever the plastic retaining clips on the assembly (the PH screwdriver will work at a pinch, something smaller would be better). There's also a retaining clip on the power input connection to the light which it's worth being careful with. YMMV/hope it helps.
I just changed my 2016 Toyota Avalon signal lamp following this instruction. So easy to do it. Just be gentle when removing it. Plastic tabs can break easily.
I want to see if I can remove the one on my (US) '17 Corolla XSE... there are other videos that said you can't remove the bulb and its the bulb housing you need to replace completely. Thanks for the video!
Thank you very much for the information! Really appreciate it. I'm planning to install LED bulbs on the side mirror of my Toyota Yaris. I just don't know if I'm going to need a load resistor to prevent hyperflashing. Do you have any idea?
Not for side bulbs as the wattage will be the same and the brightness higher. It will look kind of odd combined with the rest of the stock indicators as they will light up slightly quicker. You can fit LED indicators to the back or the front without load resistors too but not both sadly.
On my 2016 Corolla sport (Us version), once I get the casing off the inside of the mirror looks diffrent and I can’t seem to figure out how to remove the light casing, and ideas?
M_k any way you can provide me with a part number to those ? ( the small housing that Holds the bulb in) or what year and model is this car ? Thanks in advance 🙂
+mohammed mohsin If you need to remove complete mirror - ruclips.net/video/96VlhKIqqi0/видео.html Or only glass part - ruclips.net/video/oqweL8C0kqU/видео.html
LoL why the hell you doing it on bare foot? Second thing, your key is way different. My Auris same model has only form keychain and in The Netherlands they only sell keyless versions inside interrior. Also mirror i wanted change those on LED, but there is already LED, i dont have only front lights as LED :O
Few pointers to anyone doing this on a slightly different corolla (eg ZRE182) - assembly looks very similar but there are some differences to be careful with:
There are far more internal clips on the mirror cover piece on those cars - going slow with a plastic tool is going to give you a much cleaner finish than going fast with a metal screwdriver!
You'd be well advised to unscrew the mirror motor to get access to the clips of the indicator assembly (behind the mirror) rather than attempting to just lever it out with the key. It will not "pop out" as easily as the one shown in this video, and you're likely to break plastic if you force it. 3 Phillips Head screws, and then something to lever the plastic retaining clips on the assembly (the PH screwdriver will work at a pinch, something smaller would be better).
There's also a retaining clip on the power input connection to the light which it's worth being careful with.
YMMV/hope it helps.
Hi mate, I have never done one on a ZRE182 but Normally I would pop the mirror out then try to pushing the clip out from inside.
Fastest, no nonsense, to the point tutorial I have ever seen. Thanks man.
WTF.....I was thinking to call a nuclear engineer to change the light....well done mate. Keep up the good work. Cheers from Australia.
Well presented. I can watch it without the sound ( in bed at 3 am), if I am deaf, or if I don't speak the same language.
Awesome.
I just changed my 2016 Toyota Avalon signal lamp following this instruction. So easy to do it. Just be gentle when removing it. Plastic tabs can break easily.
Thank you I can understand what to do .so have saved it to watch over again .an old Mum at 85 will try
No problem and Happy new year :D
Has to be one of the best instruction videos ever non bullshit just 2.5 minutes of exactly what the title says.
Excelente trabajo! Gracias por compartir! Ahora lo hago en mi Corolla del 2018. Saludos desde Argentina!
It perfectly worked in less than 5 minutes, many thanks !
Worked on a 2016 Toyota Auris Hybrid - UK Reg
I send thanks from Poland 🇵🇱
No to daleko lecieć nie musiały ;)
Thank you soooooo much.... It's the same type but different car model. Luckily I found your vid!.
Great tutorial.. loved the point of view❤😊
I want to see if I can remove the one on my (US) '17 Corolla XSE... there are other videos that said you can't remove the bulb and its the bulb housing you need to replace completely. Thanks for the video!
Dzięki za instrukcję naprawiłem sam!
Cieszę się :)
Saved me a chunk of cash. Thank you :)
Thank you very much putting this on; simple and easy to understand.
Dominic Fong I'm happy to hear that :)
Thank you very much for the information! Really appreciate it.
I'm planning to install LED bulbs on the side mirror of my Toyota Yaris.
I just don't know if I'm going to need a load resistor to prevent hyperflashing. Do you have any idea?
Probably not
Not for side bulbs as the wattage will be the same and the brightness higher. It will look kind of odd combined with the rest of the stock indicators as they will light up slightly quicker. You can fit LED indicators to the back or the front without load resistors too but not both sadly.
Thank you very much for these instructions. 3 minute job done.
Thank you man! Dont have money to pay so have to do it by myself! Heavily breathing lol 😂
My 2017 Corolla does not have a removable bulb in the mirror lamp
Excellent , no BS tutorial!
Thanks. Really helpful. Because of this video, my day is a little better.
I wanna upgrade to LED a pry tool would work, better for removing the side mirror covers.
Thankyou, easy when you know how.
Not all heroes where capes. Thanks.
Thank you, much needed video at jan 2021
He is a magician😂
Very useful. However, I need to change the left mirror indicator lamp on my 2010 Toyota Prius. I am wondering, if this method would work the same way?
I am just an Auris user. You need to check at yours own...
Hello
I would love for you to direct me to the link where you can purchase the complete flashlight as in the video
Osram 5W5. Google it
Thanks Man,I was wondering how to get at the bulb,This helps a lot,Fair play to you.
11/10 video
thanks po I'm very satisfied 🙂
Thank you so much Very fast and handy 👍👍
On my 2016 Corolla sport (Us version), once I get the casing off the inside of the mirror looks diffrent and I can’t seem to figure out how to remove the light casing, and ideas?
I know your comment is old, but did you figure it out? I literally have the same car with the same problem and where did you buy the replacement part?
What's the bulb type for that wing mirror repeater?
It is W5W bulb
@@MultiMustek thanks very much.
hey does it work for a toyota vitz 2016 plz tell me its urgent
Thanks for this but really safety first and you have no shoes on. LOL.
Shoes are limit me ;) Chill there was something about 36 Celsius degree
@@MultiMustek No excuse... Very bad example.
Thank you so much 🙏
Thanks a million buddy
This video was incredibly helpful. Thank you!
Very simple vedio i like it bro
Your the best
What's the lamp type? I can't find the right measure to swap it
It is W5W bulb
@@MultiMustek thanks a lot 😃
I have spider shape vitz all thing same but at the end bulb is not comingout from cover any solution?
Nope, I'm Auris owner, not a toyota mechanic :)
Muito obrigado! Aprendi com você e retirei uns estalos que tinha ao abrir e fechar o retrovisor. 🌎 Do Brasil (São Paulo)
Alessandro & Gislene não tem problema
Obrigado foi muito útil seu vídeo, consegui trocar do carro do meu sogro , parabéns.
I was wondering if this has the same format as a vios g(third gen) side mirror indicators. They kinda look the same and i broke mine.
My way doesn't damage mirror, so you can try using it and tell does it work with Vios. We dont have Vios in Poland, so I cant try do it in person.
What about toyota auris 2015 hybrid its same or different?
Same
excellent video. thank you
Does this work on a 2014 Toyota Corolla S?
Thanks man, really helpful
Thanks a lot
Would that side mirror signal housing fit 2016 Toyota Corolla (USA version)?
I don't have USA version. But you could check it ;)
M_k any way you can provide me with a part number to those ? ( the small housing that Holds the bulb in) or what year and model is this car ? Thanks in advance 🙂
@@compacheo603 it is Auris 2016 EU version. I am not sure which code is "this good one", mayby 02-257?
Thanks for the video, just wondering if anyone knows 2016 Camry has the same or similar design? Thanks!
Life AND Money Saviour...... Just Need to buy BULB for 70 p amd Will Save 10 pounds for Changing .
Thank you
Many thanks from RO :D
Guys does anybody know how to do IT on a Audi A5 cant find any tutorials on it
where did you buy the indicator?
Very useful thanks alot
Does this have to be done bare footed?
Yes. And yours foot must be above EU45 size ;)
That's help a lot thanks man
Does this work on a 2014 Avalon?
Hey hi =) Ur video is great help !
I need to change only the blinker glass for my toyota vitz 2013! U knw where i can find them ? Thanks !
Search ebay for toyota yaris mk3 mirror indicator
Does one have to breathe so heavily!
Thank you!
I try to use your information
Thanks..
Thank you you show me how to do this
The Toyota Corolla's mirror is also heated
Thank you! 👍
Where are you from? We have similar lamps in NA but work differently. I will try to get one like yours
+Kelvin Cao Hi, I am from PL, can you send me a pic of your mirror?
@@MultiMustek Pozdrawiam krajana :) Też mam w swoim Aurisie W5W w kierunkowskazach lusterek, wymieniłem na LED-y Osrama
2827DYP :)
Thanks for the knowledge. :D
Thanks!
kapareho din ng corolla altis 2017 kaso sobrang higpit kaya dadalhin nalang sa casa para maipalagay ang nasirang signal light
Thanks a lot man
great
Thanks man
*thanks appreciate that*
Way harder than it looks. Everything is way tighter than the video shows.
What bulb goes in there?
Wy5w
is it the same for toyota chr 2017?
Check and tell me :)
Hello M_k, i just replaced the lamp with an led on Toyota CHR. Thanks to your video
На тойотамкамри такого нет😮 видимо модель для рынка сша ,более продумано,и проще
THANKS
Polecam się ;)
Thanks a lot!!!!!
Is Rav4 just like him?
How do you replace the mirror as mine is cracked
+mohammed mohsin You got same mirror like me? What's your car?
+mohammed mohsin If you need to remove complete mirror - ruclips.net/video/96VlhKIqqi0/видео.html
Or only glass part - ruclips.net/video/oqweL8C0kqU/видео.html
Thanks Mustek
mohammed mohsin No problem. Good luck
Toyota vios same ??
Previn Velan if your mirror looks same - yes. If differently you can always try ;)
Ok
Nice
Thankssss
Toyota was going to charge me £88 for the part, and £50 to fit. I just bought the part for £13 off ebay...
Labai ačiū. :)
Didn't bothered to put slippers on 😁
The charms of working at your own garden :)
Dzięki za ten filmik wlasnie lekko stluklem kierunkowskaz jak wyjeżdżałem z garażu i musze zmienic bo mnie ojciec zabije
Powodzenia, za kierunkowskaz nie zabije ;)
Safety first Where your shoes please
It wasn't about my safety :D
LoL why the hell you doing it on bare foot? Second thing, your key is way different. My Auris same model has only form keychain and in The Netherlands they only sell keyless versions inside interrior. Also mirror i wanted change those on LED, but there is already LED, i dont have only front lights as LED :O
I was filming it on summer, at 30°C :D
@@MultiMustek hahah i got it :D
Load of crap the cover comes off that easy.
Dave McLennan it does
Thank you