Hi Gerald, I really like what you do, you are really helping people like me to continue asking questions and start digging for answers , the world needs this and I am pretty sure it’s going to shift the paradigm, I support you and your Ideas all the way……
The reason why a typical generator is slightly more efficient when it's standing up right is because it can rotate around it's centre of gravity, instead of the rotor being pulled down and adding friction along the point of rotation. It's the same principle of the rotating stone door at the coral castle. Even though the stone is extremely heavy, you can easily push it because it's balanced on it's centre of gravity around a pivot.
Dearest Mr Gerard oh, I just found your stuff today. I am so overwhelmed by what I have watched so far. I too left school for the same reason you did. I didn't have the sense to track Tesla research like you have. I do love knowing. Belief is the enemy of knowing. Too many people want to just trust and believe rather than learn it drives me crazy when people just ride in a car and they don't notice the sounds or anyting. So I am like you I enjoy observing and experiencing. That is what makes life rich. I pray you are alive and well since this video is 2 years old. I would love to have a cup of coffee with you someday
Where has Gerard been for the last two years. I would like to see what your up to with your research. I’ve watched every video of yours many times over. I have a background in automated technology and electrical wiring so I understand what your doing and would like to finish this project and get off the grid for good. If there is anything to share I would appreciate it. Thank you and I hope your well. 4:20 my friend.
Much love sir be safe in your journey really enjoy your chat and all your knowledge my upmost respect for your perspective on life be safe think safe your safety is at the utmost importance
Yes, yes, yes. You are exactly correct about resonance! Every single thing on the planet and everything not on the planet has a vibration frequency, and it can be detected. Thanks so very much for all your hard work and explanations. You don't need a $50 word or a doctorate to understand what is going on with this. Just like you have said, people learn things incorrectly and have difficulty disposing the teachings and re-education themselves. Hallelujah someone else finally understands simple frequency resonance (vibration).
@@smileysmiff Why sure...we sent him the early version of the controllers Gerard was using, along with cash, only to be completely ignored by Brendan Brown of green n.r.g. without explanation...to me that is a thief!
I noticed how he didn't reply to you, well what he did is a pretty low act. do you know where he is in Australia. why did you send him anything especially cash !
I thank you for the work. ..all of us went to the same school. .nobody showed you what you know now " You survived all your challenges, grew in the way you needed to. ..so that you'd figure all this out for our tale chasing brother's and sister's. ..I'm just a saying what you are doing is helping me learn. ..and I've known that RF is everything for over 10 years...I'm working on some awesome things concepts....motors. ..filters. ..coils...so I get the sourness. ...it's tough...be safe. .take nothing for granted ...thanks again! :)
All its doing is letting you know it ready. That's what the musical tones are about. I feel so sorry for people these days the world's to complicated for them.
Thank you. Hopefully some will understand. All the pieces keep coming out in more explaining that you do. I sent it on to a really smart guy in michigan hopefully he can use it, to better us all.
Mr. Gerard Morin there is a gentleman Mr. Mantim Lee said he has a controller and shows the parts and diagrams for putting it together as I'm not sharp enough to put it too together or the tools but maybe if you look at it and see if it will work. Please let me know if it will work. Thank you
Gerard, please don't go!! We will miss you too much and never see you again. They are very evil and tricky!!!! Reconsider and get a body guard here too! you are explaining so much. Thanks for your videos.
I know what you are talking about regarding transmission lines. We were snowmachining under some transmission lines and it started snowing pretty good, more like an ice fog. You could hear and feel the power. I said that we needed to get away from those transmission lines. Since I have seen you, I have been following you. Great work.
yep glad to see you back gerard:):) any vids u make are good ones to see thank your for all your efforts you sure have given me a means to amaze others ... greatful :)0; god bless you man never give up never surrender ):
I wish you could figure out that speed controller, as I have a 48ft. liveaboard boat with a busted engine. I would love to put 2 or 3 of those washing machine motors inline and run them from a gas or diesel generator considering how much torque and rpm they put out. Just think my boat did 7 knots at 1350 rpm. what kind of speed I could get from those motors !?!!
good to see you back gerard thank you for the clear explenation it helps me to go on with the ( voodoo machine ) making more findings and understand more
adjusting frequencies with adjustable capacitor bank array ore some arrangements (I am not an expert with high voltages) and I did not understand all of your stuff so?
2 things, thing the first. The HV side of your controller there is the same as the primary circuit on an electric fence charger. Also, I think I have the basis for a digital to analog controller mostly worked out. Thanks for the update.
You're very inspiring I'm trying to get off the stupid list and you are helping me do that thank you do you know Ken wheeler he's riding the book on magnetism what's your thoughts God bless you I know it's an uphill battle and stupid rules the hill good luck
If I ever win the Lottery like the man who won 71 million in the U.K. & spending it on God knows what i would fund this man at least 5 mill Because he is trying to improve life for all living creatures on this planet not for greed but for Us.
Hello Gerard, i have a 3 phase AC motor i take it out from an ice maker what converter and controller i can use to run it throw a buttery 48v, i'll use it to power a small boat..
The"heatless"soldiering gun that your talking about Gerard,is kinda boarding on cold fusion.I have heard of welding steel in this SAME manner..(cold fusion)
4:19 I thought those type of heat-less guns operated on resistance. The resistance of the solder, that is. Not on any type of induction. I may have been wrong all along. I see they called them "cold heat soldering guns".
Sir Gerard Morin, the day I follow your demonstration with the washingmachine pump my mind opens. For years I got a problem with the explenation of the professor electricity and electronics. I have always the impression of a ly. You have cleared evrything. It is resonance. I have build your setup. and it is true. One day the VDAB (governement who controls the unemloyed people and tries them with force into work) approaches me. I am forced to react on a job in a gas company. I have given a demostration with your setup. I am immediately denaied forthe job. So, I am on the handout of the social security of the government. Now, I do not nead the government charity. I am an self-empoyed entrepreneur and I am teaching and implementing your setup in a rural place far from western civilised countries. That is my revange.
Merci Gerard, I agree with everything you said even on your Political views. Being mechanically Incline is very important. I own two cars and do have mileage on them but I know everypart Of my cars and they run well and they still run well, even all the appliances in my house. Including my gas furnace with I repaired last week, it took a week but I was proud of myself. Keep up the good work your an inspiration for people like myself.
I enjoyed the update Gerard,just be very careful in 🇨🇳 China,as you know,they have"funny"laws there.Anyway,I always learn something new from your videos. I already know about resonance,because without resonance,I wouldn't be able be able to build antennas for my ham/CB 📻 radio hobby. I have directional antennas that multiply power up to 10-times the input power.(yagi's and Quad's)
Funny laws in China? Just create a free energy device in the US and the FBI will find a pipe bomb factory in your basement. You will be taken without trial or even telling your relatives, because the Patriot Act allows it. Do not give away your rights, because you are scared of the news!
@@velipekkajutila9451 In China you just dissappear and are classified as a spy,many Americans and others from around the world have never been seen again once they go to China.NOT America..
I am for sure looking forward to your return. Your timing is excellent :) I'm building on a generator/motor using a not that common practice. We can't all do the same as everyone else. It will also be an tribute to a RUclipsr not longer with us. I'm not sure my generator/motor will be finished upon your release of the controller (I call it controller, call it XYZ if you want to :) ). But it feels like all parts are coming together nicely. Keep at it!
I am presently building my own controller. It is a hybrid of the best ideas presented here and by others. Funds of course are very limited. Having said that, this winter I will be implementing my first prototype. It is designed with components capable of 600v per leg of the BLDC.
You have the resonance but how to control it? It almost needs to be mechanical before you can build it in the digital. Just like the "slasher" you talk about. Since you're running 3 legs = more complicated... This is not as easy as it sounds. The problem with hv resonance is it will run across almost anything so how do you contain it? The controller has to be able to set the timing & burst the resonance in a 3 phase system all without it feeding back into the electronics. I hope you can have some success and find something suitable in this Gerard.
Heads Up Guys... where is he? Newest video doesn't allow comments.... man up... what is going on? Get even one of you get any of these devices to produce overunity? How much money did all of you give this guy? It's been how many years since you heard from him? Did he ever prove that anything he did work? Did he ever give you plans to build anything? When is the last time that patreon money cleared your bank and prove that he received it? Is anyone of you his friend and will step forward and say something?
I would like to say thank you, for inspiring me to get off my ass and physically put my hands on so many ideas to try to understand and learn about energy, have been excited to play with the idea of the spark gap in your very early videos but having fun with (msd)"amplified" to make plasma ignition with little resistance, the rf coming off it,and possibly playing with the idea of applying it towards water injection, cause that shit is literally burnig the hydrogen off of it,, im not smart but i love to build things, bjt the fact that im running gapless plugs,horsepower,mpg,throttle response massively inproved and wide open running 60degrees cooler,just blows me away!?!? Cant hardly use your cell phone the rf distorts it when you walk up to it wile running,, not that any of this pertains to your experiment but that fact that you inspired me to try to do something different to try to understand, you got to start somewhere right,, oh yea that bolt of lightning producing ozone in my garage will shock the shit out of you!!! Holey hell, when you get your school going my ignorant ass would like to attend, i would like to apply that knowledge to many ideas,, thank you for your time and sharing, maybe not have changed the world yet but definitely changed my life, keep given them hell, !
Mr. Morin: It annoyed me to learn that you can't have what you want! Your progress should not be hindered by pettiness. Here's an idea: Take the data in the whatever format (from that manufacturer/ programmer) that he gives you and then get a college student/ computer geek to change the data format to suit your specifications. Thank you for sharing your talents online. Blessings
Do you think a programmer could write this? It appears to be a timing algorithm. It needs to be timed and an amount, Volume of or pressure to be sent in pulses to three sets of coils.
Its so interesting.. Is there correlation to iron and resonance similar to how a supernova is triggered at the exact moment that iron is formed in the core of the dying star? You mention the space based weapon using this resonance energy as a "ray gun" (excuse if that analogy is insufficient or inaccurate? It seem's interesting that, its at least possible, thermitic materials were planted on the site as a "Inception" (a diversion, within a diversion, within a diversion) to cover for this resonance weapon that was undetected .... So essentially the iron in the structures was super heated all at once to cause an absolute "demolition" in which the building free falls into its own foot print??? The collapse must start on the lower floors first to keep mass falling directly into the foot print and work there way up?? Maybe the it seems it might have been a hybrid to keep the free fall within the footprint ? thanks!
Oh, I forgot something.....thank you, thank you, thank you....you have helped me solidify my understanding of our Binary Universe....when you dropped the fact regarding cell division, always 2...2-D, not 3-D. Keep Rockin!
I'm building one myself please help me out I need a wiring diagram and any information I need on how to build I already got the motor I already got the other motor and I need to attach to two shafts
Gerard, have a safe successful trip. On a side note, did you ever talk to or communicate with John Hutchison, who also resides in B.C..?? I find it hard to believe you 2 haven't met....
poynt100 I think mr hutchinson or Karla conniption have a few issues they are trying to work out before Gerrard comes into the picture. RUclips Karla conniption j Hutchinson you'll see...,............... .......................
poynt100 I don't discredit his genius. I am lead to believe his abnormal behaviour is being up played to keep alphabet agencies at bay from his research. This world makes everyone a tad mad.
Yes .. watch out for the lightening! :-D lol Great Video .. another dish of desert. Always look forward to hear what you got to say .. and I download your videos so they can be looked at again anytime later. Enjoy listening to you teach .. a new way of thinking / understanding! I have stood under those high power lines with a six foot long florescent bulb .. and like you say .. they do light up. If you are wearing rubber boots .. it won't work so well .. barefoot gives a better ground .. and depending upon where you hold the bulb with your hand .. the bulb will light up to that point. Always interesting! On another note .. what you are doing is promoting the "socialization" of energy .. (for the world) .. instead of promoting the "capitalization" of energy .. which has sent everyone into the poor house .. except those who are invested in the continued ignor-ance!
I could use a short video just to know you are still alive! 3 months is a long time to wait when you have all this excitement and anticipation to contain! Help!!!
Mr Morin, hello, how are you? So, I think I found the answer to your problem concerning the issue with the controller!?!(I sure hope this helps!!) His name is Peter Sripol. I know he can build you what you need! I have sent him a message explaining your situation and asked him to contact you directly. THANK YOU for your dedication and enlightenment!! I pray that our government collapses(this is the only way they will allow free energy) so all men and women that are created equal can build your machine and live easier. It is going to take ALL OF US AS ONE to make your dream, reality! Not impossible by any means. Big brother LOVES their money and control tho!! THANK YOU AGAIN FOR ALL YOU DO!!
are you saying the earth is not flat? level at the shore? but its not level across with the string test? maybe you could demonstrate the string test? 'water is level around the world!.. Gerald Morin
Actually at the Equator .. the water is higher than other places .. bc of rotational pull .. the moon pulls on the water also. What Gerard was saying .. if you want to prove the earth is round .. then take a laser shine it across a distance .. measure the distance from the laser to the ground at both ends and then at various places in the middle .. and you will see that there is a difference in the middle between those ends.
@@MerwinARTist I heard what he said. why then is it level at the shore. please demonstrate the laser theory . also why does the moon not pull on lakes and ponds. the moon has nothing to do with it. why did he say water is level everywhere? he started squirming when he said it. he is a fraud.
@@toma-iu9zj now that he said things like that... i dont know what to think about him on that subject. Its It's clearly not sperical as distant land proves it
@@toma-iu9zj .. The moon does pull on lakes and ponds .. and streams as well. I have personally observed it .. I used to live on St. Thomas, USVI for 4 years .. and went into the sea often. Maybe you have a different comprehension of tides .. but I doubt you'd be in agreement with those who move ships around.
@@cruzemissile5409, I agree, While I love my Gerard to bits, saying the earth is round in more or less terms is the defintion of indoctrinated, Where is the f#@king 24hours from the moon TV channel, the greedy muppets would love to offer that, oh thats right they dont, cant , will not, and will ever because they are useless liars. If the world is spinning and the air isnt (because one is ground and one is air) then when a plane takes off it just needs to hover and try to land later on doesnt it, not actually travel a distance, then it can blow to pieces when it tries to land on the spinning ball. LOL, the best part of waking up is the flat-earth movement, all these scientific equation types come out the wood works when the senses actually DONT LIE.
I use simple vacuum tubes in my 3 Stubblefield coils the resistance takes certain amount of teslas in that time one of the 3 phase makes a emf to back power the air emf to move the others and magnetic action prepells it to next. Thus creating an moving emf to react with the other waves from Stubblefield coils and on to the next to help push the next two. The power capacity is limited by the speed of controller. Looking for the right material to make organic switch for greater power. Waiting on super capacitors. Extra power for faster switching.
Hi Gerald, I really like what you do, you are really helping people like me to continue asking questions and start digging for answers , the world needs this and I am pretty sure it’s going to shift the paradigm, I support you and your Ideas all the way……
By chance is those crazy craft that we be seeing now days binging powed by this technology?
Look up John Searl Documentary. Yes. This technology is from the 40's. This guy is just figuring out how John Searl did it.
The reason why a typical generator is slightly more efficient when it's standing up right is because it can rotate around it's centre of gravity, instead of the rotor being pulled down and adding friction along the point of rotation. It's the same principle of the rotating stone door at the coral castle. Even though the stone is extremely heavy, you can easily push it because it's balanced on it's centre of gravity around a pivot.
Did you just reword my comment and post it as yours? I hate youtube
Dearest Mr Gerard oh, I just found your stuff today. I am so overwhelmed by what I have watched so far. I too left school for the same reason you did. I didn't have the sense to track Tesla research like you have. I do love knowing. Belief is the enemy of knowing. Too many people want to just trust and believe rather than learn it drives me crazy when people just ride in a car and they don't notice the sounds or anyting. So I am like you I enjoy observing and experiencing. That is what makes life rich. I pray you are alive and well since this video is 2 years old. I would love to have a cup of coffee with you someday
Gerard, bless you sweet blessed man. You are thinking so clearly.
You are very fun to listen to. Thank you. God bless you.
Where are you Sir ?
Where has Gerard been for the last two years. I would like to see what your up to with your research. I’ve watched every video of yours many times over. I have a background in automated technology and electrical wiring so I understand what your doing and would like to finish this project and get off the grid for good. If there is anything to share I would appreciate it. Thank you and I hope your well. 4:20 my friend.
Do you have the controller to drive the LG?
Your amazing Whats going on any updates I can't find videos more recent than two years?
Much love sir be safe in your journey really enjoy your chat and all your knowledge my upmost respect for your perspective on life be safe think safe your safety is at the utmost importance
Hi gerard thanks for all your hard work,are you still around I haven't seen any videos ,any updates just want to no your still alive
A real Life Genious the level of Teslar... Much Respect.
thanks for keeping us up to date Gerard.
Yes, yes, yes. You are exactly correct about resonance! Every single thing on the planet and everything not on the planet has a vibration frequency, and it can be detected. Thanks so very much for all your hard work and explanations. You don't need a $50 word or a doctorate to understand what is going on with this. Just like you have said, people learn things incorrectly and have difficulty disposing the teachings and re-education themselves. Hallelujah someone else finally understands simple frequency resonance (vibration).
Take your sweet time sir ! Time is of the essence! Patience add virtue ! Keep doing what you do.
Greetings Gerard hope all goes well in China.thank you for the update
Hey there thief, you still plugging away down under? Karma baby, karma.
Yeah Brendan Brown of green nrg I'm talking to you thief
Hi Arnold, can you let us know what happened !
@@smileysmiff Why sure...we sent him the early version of the controllers Gerard was using, along with cash, only to be completely ignored by Brendan Brown of green n.r.g. without explanation...to me that is a thief!
I noticed how he didn't reply to you, well what he did is a pretty low act. do you know where he is in Australia.
why did you send him anything especially cash !
Your commentary about the present is pretty scary. But the future looks pretty good with BRILLIANT people like you Love you sir, Keep on .
I thank you for the work. ..all of us went to the same school. .nobody showed you what you know now " You survived all your challenges, grew in the way you needed to. ..so that you'd figure all this out for our tale chasing brother's and sister's. ..I'm just a saying what you are doing is helping me learn. ..and I've known that RF is everything for over 10 years...I'm working on some awesome things concepts....motors. ..filters. ..coils...so I get the sourness. ...it's tough...be safe. .take nothing for granted ...thanks again! :)
All its doing is letting you know it ready.
That's what the musical tones are about.
I feel so sorry for people these days the world's to complicated for them.
Thank you. Hopefully some will understand. All the pieces keep coming out in more explaining that you do. I sent it on to a really smart guy in michigan hopefully he can use it, to better us all.
Mr. Gerard Morin there is a gentleman Mr. Mantim Lee said he has a controller and shows the parts and diagrams for putting it together as I'm not sharp enough to put it too together or the tools but maybe if you look at it and see if it will work. Please let me know if it will work. Thank you
first time av seen this. brilliant, luv it.
Don't let any take you down spiritually. Keep up your spirits
Gerard, please don't go!! We will miss you too much and never see you again. They are very evil and tricky!!!! Reconsider and get a body guard here too! you are explaining so much. Thanks for your videos.
Thank you Gerard, for sharing this information. This will help me do some of my own experiments
Why Gerard is not releasing new videos?
People that want to make energy free usually end up dead or missing
Gerard Morin Good to hear from you and have a good time on your trip.
Thanks for a great video.
From where I can buy this controller. may you suggest please.
I know what you are talking about regarding transmission lines. We were snowmachining under some transmission lines and it started snowing pretty good, more like an ice fog. You could hear and feel the power. I said that we needed to get away from those transmission lines. Since I have seen you, I have been following you. Great work.
I know this is a old video but I just want to say that all you see with borders is all planed and also lots more.
yep glad to see you back gerard:):) any vids u make are good ones to see thank your for all your efforts you sure have given me a means to amaze others ... greatful :)0; god bless you man never give up never surrender ):
You brought hope into my life by your projects, screw your enemies
I wish you could figure out that speed controller, as I have a 48ft. liveaboard boat with a busted engine. I would love to put 2 or 3 of those washing machine motors inline and run them from a gas or diesel generator considering how much torque and rpm they put out. Just think my boat did 7 knots at 1350 rpm. what kind of speed I could get from those motors !?!!
Then you would be looking into a variable speed propeller due to cavitation.🤠
have u tested the laser across water urself? seems from the tests people have done across water there appears to be no curve.
Zero measurable curvature over flat level water
Good to see you Gerard. Glad your doing well.
Gerard, Can you please explain more on resonance? Is there a specific frequency that water resonates?
It is nice to see a right thinking person. Thank you
Good to see you are back.
Nice to see you , good trip. Thanks again.
Awesome..have a great trip
You trip me out you are so straightforward it is amazing it is quite comical to listen to you describe people or things
He is so fun.
good to see you back gerard thank you for the clear explenation it helps me to go on with the ( voodoo machine ) making more findings and understand more
2022 and this discussion rings so true it hurts. It's time to release the Tesla technology.
What Happened to Gerard? H just disappeared.
adjusting frequencies with adjustable capacitor bank array ore some arrangements (I am not an expert with high voltages) and I did not understand all of your stuff so?
2 things, thing the first. The HV side of your controller there is the same as the primary circuit on an electric fence charger. Also, I think I have the basis for a digital to analog controller mostly worked out. Thanks for the update.
Mr Morin I was wondering if you have seen the work of Joseph Newman and his big eurika machine. His work looks a lot like yours
You're very inspiring I'm trying to get off the stupid list and you are helping me do that thank you do you know Ken wheeler he's riding the book on magnetism what's your thoughts God bless you I know it's an uphill battle and stupid rules the hill good luck
Another great video. I love to hear how you break things down. Thanks for doing what you do.
If I ever win the Lottery like the man who won 71 million in the U.K. & spending it on God knows what i would fund this man at least 5 mill Because he is trying to improve life for all living creatures on this planet not for greed but for Us.
Good luck in China, looking forward to your next update.Dont get frustrated I know you will get good results eventually.
Safe travels. And glad to hear from you.Take care. 😉
Gerard i have a question for you!! What do you think about kapanadze ...and don L smith ... both they were dealing with resonance....????
Hello Gerard, i have a 3 phase AC motor i take it out from an ice maker what converter and controller i can use to run it throw a buttery 48v, i'll use it to power a small boat..
Was thinking and wondering about you just yesterday so I guess you picked that up haha. Gonna enjoy your vid now and thank you beaucoup mon pote.
The"heatless"soldiering gun that your talking about Gerard,is kinda boarding on cold fusion.I have heard of welding steel in this SAME manner..(cold fusion)
resonance
@@hdj81Vlimited Cold fusion...
4:19 I thought those type of heat-less guns operated on resistance. The resistance of the solder, that is. Not on any type of induction. I may have been wrong all along. I see they called them "cold heat soldering guns".
Take care Gerard. Wish you all the best over there. I no you will get this problem sorted. all the best Richard
Sir Gerard Morin, the day I follow your demonstration with the washingmachine pump my mind opens. For years I got a problem with the explenation of the professor electricity and electronics. I have always the impression of a ly. You have cleared evrything. It is resonance. I have build your setup. and it is true. One day the VDAB (governement who controls the unemloyed people and tries them with force into work) approaches me. I am forced to react on a job in a gas company. I have given a demostration with your setup. I am immediately denaied forthe job. So, I am on the handout of the social security of the government. Now, I do not nead the government charity. I am an self-empoyed entrepreneur and I am teaching and implementing your setup in a rural place far from western civilised countries. That is my revange.
why not a analog controller?
Thanks for the update .... safe journeys ♾
Merci Gerard, I agree with everything you said even on your Political views. Being mechanically
Incline is very important. I own two cars and do have mileage on them but I know everypart
Of my cars and they run well and they still run well, even all the appliances in my house.
Including my gas furnace with I repaired last week, it took a week but I was proud of myself.
Keep up the good work your an inspiration for people like myself.
Have you seen the Electric Universe series of videos?
I enjoyed the update Gerard,just be very careful in 🇨🇳 China,as you know,they have"funny"laws there.Anyway,I always learn something new from your videos.
I already know about resonance,because without resonance,I wouldn't be able be able to build antennas for my ham/CB 📻 radio hobby.
I have directional antennas that multiply power up to 10-times the input power.(yagi's and Quad's)
Funny laws in China? Just create a free energy device in the US and the FBI will find a pipe bomb factory in your basement. You will be taken without trial or even telling your relatives, because the Patriot Act allows it. Do not give away your rights, because you are scared of the news!
@@velipekkajutila9451 In China you just dissappear and are classified as a spy,many Americans and others from around the world have never been seen again once they go to China.NOT America..
4 gauge if you don't think it happens here in the U.S. your a fool. peace all
@@sanguineshade9545 YOUR the FOOL,it's the chicoms that are doing this,again,NOT AMERICANS.
Hi Mr. Gerard there is the yasa 400 electric motors how about reverse engenering of the controller if some one could do this
Great video, I love to hear you have a good rant, all true, keep up the good work. All the best
I am for sure looking forward to your return. Your timing is excellent :) I'm building on a generator/motor using a not that common practice. We can't all do the same as everyone else. It will also be an tribute to a RUclipsr not longer with us. I'm not sure my generator/motor will be finished upon your release of the controller (I call it controller, call it XYZ if you want to :) ). But it feels like all parts are coming together nicely. Keep at it!
I am presently building my own controller. It is a hybrid of the best ideas presented here and by others. Funds of course are very limited. Having said that, this winter I will be implementing my first prototype. It is designed with components capable of 600v per leg of the BLDC.
You have the resonance but how to control it? It almost needs to be mechanical before you can build it in the digital. Just like the "slasher" you talk about. Since you're running 3 legs = more complicated... This is not as easy as it sounds. The problem with hv resonance is it will run across almost anything so how do you contain it? The controller has to be able to set the timing & burst the resonance in a 3 phase system all without it feeding back into the electronics. I hope you can have some success and find something suitable in this Gerard.
Thank you for the knowledge & inspiration!
Anybody watching in 2020? And what happened to this guy. I'm interested in this guy. He so interesting.
be careful on your trip. Id really love to see u succeed!
Keep up the great work brother! I'm rooting for ya!
Heads Up Guys... where is he? Newest video doesn't allow comments.... man up... what is going on? Get even one of you get any of these devices to produce overunity? How much money did all of you give this guy? It's been how many years since you heard from him? Did he ever prove that anything he did work? Did he ever give you plans to build anything? When is the last time that patreon money cleared your bank and prove that he received it? Is anyone of you his friend and will step forward and say something?
I would like to say thank you, for inspiring me to get off my ass and physically put my hands on so many ideas to try to understand and learn about energy, have been excited to play with the idea of the spark gap in your very early videos but having fun with (msd)"amplified" to make plasma ignition with little resistance, the rf coming off it,and possibly playing with the idea of applying it towards water injection, cause that shit is literally burnig the hydrogen off of it,, im not smart but i love to build things, bjt the fact that im running gapless plugs,horsepower,mpg,throttle response massively inproved and wide open running 60degrees cooler,just blows me away!?!? Cant hardly use your cell phone the rf distorts it when you walk up to it wile running,, not that any of this pertains to your experiment but that fact that you inspired me to try to do something different to try to understand, you got to start somewhere right,, oh yea that bolt of lightning producing ozone in my garage will shock the shit out of you!!! Holey hell, when you get your school going my ignorant ass would like to attend, i would like to apply that knowledge to many ideas,, thank you for your time and sharing, maybe not have changed the world yet but definitely changed my life, keep given them hell, !
Still in the Fight.....Great check-in....God speed!
Anyone heard from Gerard? I am truly worried that he may have been compromised in some way. I hope we hear from him soon.
good luck and I hope that you will come back to us all and healthy and you will have a working controller. see you later
Love your way of thinking
Looks like an AC to DC back to AC controller usually used on inverter AC systems.
Safe travels ! Thanks again !
Mr. Morin: It annoyed me to learn that you can't have what you want! Your progress should not be hindered by pettiness.
Here's an idea: Take the data in the whatever format (from that manufacturer/ programmer) that he gives you and then get a college student/ computer geek to change the data format to suit your specifications.
Thank you for sharing your talents online. Blessings
Do you think a programmer could write this? It appears to be a timing algorithm. It needs to be timed and an amount, Volume of or pressure to be sent in pulses to three sets of coils.
26:35 "It is scary when we live in a world of stupid like this" ..... hit the nail in the head.
Its so interesting.. Is there correlation to iron and resonance similar to how a supernova is triggered at the exact moment that iron is formed in the core of the dying star? You mention the space based weapon using this resonance energy as a "ray gun" (excuse if that analogy is insufficient or inaccurate? It seem's interesting that, its at least possible, thermitic materials were planted on the site as a "Inception" (a diversion, within a diversion, within a diversion) to cover for this resonance weapon that was undetected .... So essentially the iron in the structures was super heated all at once to cause an absolute "demolition" in which the building free falls into its own foot print??? The collapse must start on the lower floors first to keep mass falling directly into the foot print and work there way up?? Maybe the it seems it might have been a hybrid to keep the free fall within the footprint ? thanks!
Great to see you back
Oh, I forgot something.....thank you, thank you, thank you....you have helped me solidify my understanding of our Binary Universe....when you dropped the fact regarding cell division, always 2...2-D, not 3-D. Keep Rockin!
Just found your Video sent the Last 24 + hour's learning
He averiguado por gerard morin , no se sabe nada de el desde hace tiempo.
Alguien tiene información???
GLAD TO SEE YOU 😎SIR EXCELLENT INFO.
Powerfully Energetic video. Thank You Friend.
I'm building one myself please help me out I need a wiring diagram and any information I need on how to build I already got the motor I already got the other motor and I need to attach to two shafts
Get a machinist
Gerard, have a safe successful trip. On a side note, did you ever talk to or communicate with John Hutchison, who also resides in B.C..?? I find it hard to believe you 2 haven't met....
poynt100 I think mr hutchinson or Karla conniption have a few issues they are trying to work out before Gerrard comes into the picture.
RUclips Karla conniption j Hutchinson you'll see...,...............
.......................
Oh Yeah, I know about these issues and it's a shame.
Thank you for response.
poynt100 I don't discredit his genius.
I am lead to believe his abnormal behaviour is being up played to keep alphabet agencies at bay from his research.
This world makes everyone a tad mad.
Bonjour Gérard, Comment vas=tu? What happen to you now? Long time no news. Please give us news from you. What are you doing ?
He's gone he took the money and ran you fool it was all bullshit.
I didn't get a email notification of this new video by the way! Pushed the bell, subscribed no notification. Lets call youtube THERETUBE.
Yes .. watch out for the lightening! :-D lol Great Video .. another dish of desert. Always look forward to hear what you got to say .. and I download your videos so they can be looked at again anytime later. Enjoy listening to you teach .. a new way of thinking / understanding! I have stood under those high power lines with a six foot long florescent bulb .. and like you say .. they do light up. If you are wearing rubber boots .. it won't work so well .. barefoot gives a better ground .. and depending upon where you hold the bulb with your hand .. the bulb will light up to that point. Always interesting! On another note .. what you are doing is promoting the "socialization" of energy .. (for the world) .. instead of promoting the "capitalization" of energy .. which has sent everyone into the poor house .. except those who are invested in the continued ignor-ance!
Thanks for the update, Enjoy China
I could use a short video just to know you are still alive! 3 months is a long time to wait when you have all this excitement and anticipation to contain! Help!!!
Just watch your clip yesterday, but make me walk-up. wait to see your product. coz I'm looking for low cost energy / free energy.
Mr Morin, hello, how are you? So, I think I found the answer to your problem concerning the issue with the controller!?!(I sure hope this helps!!) His name is Peter Sripol. I know he can build you what you need! I have sent him a message explaining your situation and asked him to contact you directly. THANK YOU for your dedication and enlightenment!! I pray that our government collapses(this is the only way they will allow free energy) so all men and women that are created equal can build your machine and live easier. It is going to take ALL OF US AS ONE to make your dream, reality! Not impossible by any means. Big brother LOVES their money and control tho!! THANK YOU AGAIN FOR ALL YOU DO!!
are you saying the earth is not flat? level at the shore? but its not level across with the string test? maybe you could demonstrate the string test? 'water is level around the world!.. Gerald Morin
Actually at the Equator .. the water is higher than other places .. bc of rotational pull .. the moon pulls on the water also. What Gerard was saying .. if you want to prove the earth is round .. then take a laser shine it across a distance .. measure the distance from the laser to the ground at both ends and then at various places in the middle .. and you will see that there is a difference in the middle between those ends.
@@MerwinARTist I heard what he said. why then is it level at the shore. please demonstrate the laser theory . also why does the moon not pull on lakes and ponds. the moon has nothing to do with it. why did he say water is level everywhere? he started squirming when he said it. he is a fraud.
@@toma-iu9zj now that he said things like that... i dont know what to think about him on that subject. Its It's clearly not sperical as distant land proves it
@@toma-iu9zj .. The moon does pull on lakes and ponds .. and streams as well. I have personally observed it .. I used to live on St. Thomas, USVI for 4 years .. and went into the sea often. Maybe you have a different comprehension of tides .. but I doubt you'd be in agreement with those who move ships around.
@@cruzemissile5409, I agree, While I love my Gerard to bits, saying the earth is round in more or less terms is the defintion of indoctrinated, Where is the f#@king 24hours from the moon TV channel, the greedy muppets would love to offer that, oh thats right they dont, cant , will not, and will ever because they are useless liars. If the world is spinning and the air isnt (because one is ground and one is air) then when a plane takes off it just needs to hover and try to land later on doesnt it, not actually travel a distance, then it can blow to pieces when it tries to land on the spinning ball. LOL, the best part of waking up is the flat-earth movement, all these scientific equation types come out the wood works when the senses actually DONT LIE.
I use simple vacuum tubes in my 3 Stubblefield coils the resistance takes certain amount of teslas in that time one of the 3 phase makes a emf to back power the air emf to move the others and magnetic action prepells it to next. Thus creating an moving emf to react with the other waves from Stubblefield coils and on to the next to help push the next two. The power capacity is limited by the speed of controller. Looking for the right material to make organic switch for greater power. Waiting on super capacitors. Extra power for faster switching.