Thanks Brandon, I have a 2015 F6B Deluxe, same color as yours, and I have been considering a Klockwerks windshield. But, like you said, no one posts anything showing their windshield and telling you all the specifications! Thank you for doing just that! I am 6' and will be ordering the 16" today. Ride safe and ride often!!
Looks pretty good on the Bike. I had thought about this set up at one time but could not justify that after having my F4 Shield. Please put some time in on it and give us another review please. Thank You for sharing.
Hey Chris, I went on long rides with it and I still like it. I guess it depends on your riding style and what you like. I like getting just enough air in my face, and that is what the 14 inch does for me. Some people don't want any wind in their face. No regrets. Let me know if you have any specific questions. Also Im a big fan of your channel
Had one on my 09 and loved it.Then put the same on the 2018,sorry did not like it at all.Stock was better for me.Sold the 18 for a F3 Spyder and got an F4 windshield and love it.Now Brandon my wife rides the Spyder and I picked a 2013 F6B for me and my for with the Knock werks again.Is this fairing the same as a regular Goldwing?13 to 17.
Hey John, thanks, I like getting some wind, and at my height I get pretty good wind protection. But you're right; I have yet to hear anyone talk bad about the mad stad.
Thanks for the video. Very much needed!!! It looks great. Did you use the “straight line (with a buddy) measurement” level just above your upper lip they show in other videos to choose your size? And if so, measure vertical down to the bottom of shield where it meets rubber?
Hey Troy, I used the straight line technique. It was a little lower than they recommend but the step up I think would of been too high for me. I didn't want to be cut off from the wind completely. It fits me really good. The wind hits right at the crown of my helmet. But make a wise decision because once you put it on, you can't return it. Don't want to make an expensive mistake! Hope this helps
I bought a F6B few days back and its got the same windscreen (or may be shorter)... I get terrible wind noise after 65 mph. It may be the helmet or windscreen... Will try to get a new helmet first.
Yes it could be the helmet. The helmet i used on my crotch rocket sucked for my f6b. Also if the windscreen is too low then its blowing all the wind right in your face instead of over your head. I like my HJC RPHA 90 helmet.
Thx for the video. Thank you for putting the specifics out there. I am looking to purchase the screen for my 06 goldwing. Are you looking over the shield? Or barely looking through the shield.?
Looks nice, can you tell me where you ordered from? (Online website or a shop etc). Also do you look THROUGH or OVER the windshield on these? I just got a 2015 f6b yesterday and the wind shook my half helmet and shades all the way home for 3 hours 🤦🏾♂️ I just don't want to look like those bozos who have the extra large/extra funny looking windshields. Holla back...
sequerity This windshield is made to look over it. Not through it. I got mine from klockwerks. Just make sure u do all your research before purchasing because you cant return them after you put it on. And they are expensive bit i like it. It gives me just enough wind. Make sure you take your height into factor
Thx for the video. Thank you for putting the specifics out there. I am looking to purchase a klockwerks screen for my 06 goldwing. Are you looking over the shield? Or barely looking through the shield.?
Thanks Brandon, I have a 2015 F6B Deluxe, same color as yours, and I have been considering a Klockwerks windshield. But, like you said, no one posts anything showing their windshield and telling you all the specifications! Thank you for doing just that! I am 6' and will be ordering the 16" today. Ride safe and ride often!!
No problem C B, Let me know what your experience is with it!
@batten5150 have you put the 16" on yet? Have any pics or videos? 🤞🏽🤞🏽
How did that 16 work out for you?
@@ThreeWheeler54 It worked fine until I upgraded my seat (Russell Day Long) and then it became too short.
Love your videos Brandon. You actually show your bike and the product and don't just stand around listening to yourself talk.
James Young thanks James. That annoys me too when people do that
I installed the 14" Klock Werks WS on my 2015 GL1800 and I definitely dig the look. Thank you for sharing!
gave a like just for the underdog content imo :3 i dont have a goldwing n never had one sadly
Looks pretty good on the Bike. I had thought about this set up at one time but could not justify that after having my F4 Shield. Please put some time in on it and give us another review please. Thank You for sharing.
Hey Chris, I went on long rides with it and I still like it. I guess it depends on your riding style and what you like. I like getting just enough air in my face, and that is what the 14 inch does for me. Some people don't want any wind in their face. No regrets. Let me know if you have any specific questions. Also Im a big fan of your channel
Had one on my 09 and loved it.Then put the same on the 2018,sorry did not like it at all.Stock was better for me.Sold the 18 for a F3 Spyder and got an F4 windshield and love it.Now Brandon my wife rides the Spyder and I picked a 2013 F6B for me and my for with the Knock werks again.Is this fairing the same as a regular Goldwing?13 to 17.
I believe so.. I think it finally changed starting 2018.
@@MegaBgibbs I have a pix of my Yellow 09,my put one on the F6b anyway
I sacrifice looks for wind protection, and performance ,nothing beats the mad stad, but great looking shield for sure you got there
Hey John, thanks, I like getting some wind, and at my height I get pretty good wind protection. But you're right; I have yet to hear anyone talk bad about the mad stad.
Thanks for the video. Very much needed!!! It looks great. Did you use the “straight line (with a buddy) measurement” level just above your upper lip they show in other videos to choose your size? And if so, measure vertical down to the bottom of shield where it meets rubber?
Hey Troy, I used the straight line technique. It was a little lower than they recommend
but the step up I think would of been too high for me. I didn't want to be cut off from the wind completely. It fits me really good. The wind hits right at the crown of my helmet. But make a wise decision because once you put it on, you can't return it. Don't want to make an expensive mistake! Hope this helps
your Bike is Dope!
I bought a F6B few days back and its got the same windscreen (or may be shorter)... I get terrible wind noise after 65 mph. It may be the helmet or windscreen... Will try to get a new helmet first.
Yes it could be the helmet. The helmet i used on my crotch rocket sucked for my f6b. Also if the windscreen is too low then its blowing all the wind right in your face instead of over your head. I like my HJC RPHA 90 helmet.
Sweet very sharp 👍
Thanks
Looks mint!
Is it difficult to see threw it while riding at night?
@@boveaverage4936 no. Im actually looking slightly over the top of it.
Thx for the video. Thank you for putting the specifics out there. I am looking to purchase the screen for my 06 goldwing. Are you looking over the shield? Or barely looking through the shield.?
My fault for not getting back to you. Im looking over the wind screen probably by a couple inches. Did you end up getting one?
@@MegaBgibbs No Worries. I did not purchase one.
Looks nice, can you tell me where you ordered from? (Online website or a shop etc).
Also do you look THROUGH or OVER the windshield on these?
I just got a 2015 f6b yesterday and the wind shook my half helmet and shades all the way home for 3 hours 🤦🏾♂️
I just don't want to look like those bozos who have the extra large/extra funny looking windshields.
Holla back...
sequerity This windshield is made to look over it. Not through it. I got mine from klockwerks. Just make sure u do all your research before purchasing because you cant return them after you put it on. And they are expensive bit i like it. It gives me just enough wind. Make sure you take your height into factor
Is this dark smoke or tint?
Dark Smoke. I still have it on. Works great for me
Greetings from Poland.
I have a question for you what oil do you use in your Honda F6B
Greetings!! I use Amsoil Metric 10W 30
@@MegaBgibbs How the gearbox works. Does it change smoothly.
@@mariuszgraczyk8583 yes. One of the best oils you can use in my opinion
also got the vented model
Look forward to a follow up after you’ve had it for awhile.
I've travelled a lot with it now. I like it a lot. Gives me just enough wind circulation. The wind hits right at the top of my helmet.
It looks good, would you say the air hitting the top of your helmet is smooth or does it have some buffeting.
@@jonsea4225 For my helmet its smooth. I have the Rpha 90. But I've had other helmets that are not as good slicing through the wind.
Thanks Brandon, I have a similar RPHA Max and am 5’ 11” so may buy the shield but maybe the tall one.
Are you getting any buffering?
I pull mine 14'' up Totally Better 6' 2
I have one on My 2006
Thx for the video. Thank you for putting the specifics out there. I am looking to purchase a klockwerks screen for my 06 goldwing. Are you looking over the shield? Or barely looking through the shield.?