Hi... Battery size is "AAA" , 1.2 volt, 750 mAH. This is the actual battery specification. But in my case, i couldn't find batteries with same specification. So i brought "AAA , 1.2 volt with 1100mAH". It is working well. Thanks for watching.
Thank you for the tutorial! I ordered "Eneloop AAA 750 mAh" batteries from a Dutch webshop called NKON. Soldering the batteries was the hardest part. My soldering iron clearly did not have the right wattage. Also remounting the rings took me a while.
Thank you, needed to know how to take the top cover off. my button had some issues and basically failed due to the dumb idea of putting a rubber gasket that wears out over time so I just stuck some thick double stick tape in there and it should last now until I need new tape
1:20 is the important part. slide it down, not up (also works for bt5200). Otherwise you'll break the hinges. Also, the top assembly with plastic rings: look with the light inside the scroller ring and align the plastic bump with a hole at number 10. It's not perfectly 10, there is a slight shift 1mm. Thanks for the video, btw!
200% agree bro. They do this on purpose so most people who are not confident enough to replace it will buy another one. It should be illegal, just like unibody phones
Vorsicht. Es ist machbar aber die Lötfahnen der Akkus passen vom Winkel her nicht. Man muss sie also ablöten und die Akkus ausrichten zum wieder anlöten. Auch sind die Lötfahnen zu breit. Das lässt sich aber mit einer normalen Schere bearbeiten. Mit etwas Geschick und Lötfett funktioniert der Rasierer wieder wie am ersten Tag.
Hab es auch so in etwa hinbekommen mit den Akkus. Aber nun hab ich das problem beim zusammenbauen wieder. Ich bekomm das nichtmehr hin wo man motor einsetzt. Den versteller drauf wo man die mm einstellt und das es nach oben fährt. Kannst du mir da irgendwie helfen? Danke
@@olihilke9251 ja danke. nix großes bestimmt. Aber ich hab null Ahnung und checks nicht. Ring verstellung drauf mit den mm zum einstellen dann wie bekomm ich die 2 plastikteile wieder genau so hin damit es beim drehen das andere plastikteil wieder nach oben schiebt. Katastr. echt :)
Thanks! I fixed the BT5200. I used Panasonic Eneloop AAA 750mAh. Edit: I have recharged the trimmer after replacing the battery. Today, after 10 minutes of shaving, the trimmer started to weaken and the red LED was blinking. Why so short?
Hey! I have a similar model and I have put in the new batteries. But the orange light keeps blinking even now. Is there a way to reset it? The trimmer is working fine otherwise
I'm having the same one, it got lot of water stains and dirt accumulated. I was wondering if i can find a disassembly video for this model as I was not sure how to open it, but I was lucky. Thank you!!!
Useful video but there is a cut where you remove the batteries. Mine are stuck in the top end somehow, I can pull the bottom end out about 1cm. Maybe they are soldered at the top? Also, it's confusing why you solder at the circuit board, is that really necessary?
Hello... Thank you... This was really helpful. I am facing a problem; after replacing the battery, I couldn't turn off the device. Had to let the battery discharge before fitting everything else in place. Something on the motherboard caught fire that must have been responsible for failure of the switch. Can you confirm.
Didn't work for me I'm afraid. The bit from 1:45 onwards, I have tried to disassemble it with a screwdriver and no matter what, it will not open. I do however have the BT5260 model, but it appears to have been configured in the same way as the model in the video.
A tu instrukcja po Polsku dla BT9290 🇵🇱 ruclips.net/video/7dk15n1HS2Q/видео.html z dodatkową informacją, jak rozbierać takie sprzęty, aby ich nie uszkodzić
That's a great video but Phillips should be ashamed!!
Hi... Battery size is "AAA" , 1.2 volt, 750 mAH. This is the actual battery specification. But in my case, i couldn't find batteries with same specification. So i brought "AAA , 1.2 volt with 1100mAH". It is working well. Thanks for watching.
Do you need a battery with solder tabs? Or is a normal AAA battery ok (with no solder tab)?
@@rholligan solder tabs
How come two batteries for almost 3 volts gets a 15 volts charger comes with this shaver in the box?
Batary cost
Hi do i need nimh bateries or alkaline batteries?
Thank you for the tutorial! I ordered "Eneloop AAA 750 mAh" batteries from a Dutch webshop called NKON.
Soldering the batteries was the hardest part. My soldering iron clearly did not have the right wattage. Also remounting the rings took me a while.
Thank you, needed to know how to take the top cover off. my button had some issues and basically failed due to the dumb idea of putting a rubber gasket that wears out over time so I just stuck some thick double stick tape in there and it should last now until I need new tape
1:20 is the important part. slide it down, not up (also works for bt5200). Otherwise you'll break the hinges. Also, the top assembly with plastic rings: look with the light inside the scroller ring and align the plastic bump with a hole at number 10. It's not perfectly 10, there is a slight shift 1mm.
Thanks for the video, btw!
Merci beaucoup, j'ai reussi sauvé ma tonndeuse. 4,5€ les batteries versus 50€ une nouvelle. Le choix est vite et clair. Thanks
What a shitty design.... Doing a complete dissassembly just to get to the batteries.
200% agree bro. They do this on purpose so most people who are not confident enough to replace it will buy another one. It should be illegal, just like unibody phones
When you know that a battery normally used will last 2 years max, that's truly a shame
@@aniki937 i was able to replace it but it still shows low batterie and charging leads to really hot batteries.
At least it works again.
Vorsicht. Es ist machbar aber die Lötfahnen der Akkus passen vom Winkel her nicht. Man muss sie also ablöten und die Akkus ausrichten zum wieder anlöten. Auch sind die Lötfahnen zu breit. Das lässt sich aber mit einer normalen Schere bearbeiten. Mit etwas Geschick und Lötfett funktioniert der Rasierer wieder wie am ersten Tag.
Hab es auch so in etwa hinbekommen mit den Akkus. Aber nun hab ich das problem beim zusammenbauen wieder. Ich bekomm das nichtmehr hin wo man motor einsetzt. Den versteller drauf wo man die mm einstellt und das es nach oben fährt. Kannst du mir da irgendwie helfen? Danke
@@BlackBmw79 Keine Ahnung leider. Ist ewig her.. Bei mir passte alles im Anschluss. Aber sicher nichts großes. Ich drück die Daumen.
@@olihilke9251 ja danke. nix großes bestimmt. Aber ich hab null Ahnung und checks nicht. Ring verstellung drauf mit den mm zum einstellen dann wie bekomm ich die 2 plastikteile wieder genau so hin damit es beim drehen das andere plastikteil wieder nach oben schiebt. Katastr. echt :)
Thanks! I fixed the BT5200. I used Panasonic Eneloop AAA 750mAh. Edit: I have recharged the trimmer after replacing the battery. Today, after 10 minutes of shaving, the trimmer started to weaken and the red LED was blinking. Why so short?
I think Is possibile without welder with rechargeble 🔋AAA 1,2v 750 mah Duracell,what you think??
Hey! I have a similar model and I have put in the new batteries. But the orange light keeps blinking even now. Is there a way to reset it?
The trimmer is working fine otherwise
Thanks a lot, mine is another model, but is very similar.
Works to me
I'm having the same one, it got lot of water stains and dirt accumulated. I was wondering if i can find a disassembly video for this model as I was not sure how to open it, but I was lucky. Thank you!!!
Thanks for sharing! Trimmer now as good as new 👍 🇬🇧
thank you very much i do it and work very well !!!
Useful video but there is a cut where you remove the batteries. Mine are stuck in the top end somehow, I can pull the bottom end out about 1cm. Maybe they are soldered at the top? Also, it's confusing why you solder at the circuit board, is that really necessary?
yes, thats the important part missing - you need to solder, there is no other way...))
Thanks a looot man for sharing. Any idea of the dimensions of the batteries?
Hello... Thank you... This was really helpful. I am facing a problem; after replacing the battery, I couldn't turn off the device. Had to let the battery discharge before fitting everything else in place. Something on the motherboard caught fire that must have been responsible for failure of the switch. Can you confirm.
You forgot the pin in the plastick on of switch?
Thanks a lot for this video!
Thx very helpfull 💪👍
Hello! Thank you so much. What are you doing with the paint brush in the last part of this tutorial?
Cleaning hair/pubes off 😂
Thanks, was about to trash mine !
Please tell where would we get this battery... i.e. welded battery
Didn't work for me I'm afraid. The bit from 1:45 onwards, I have tried to disassemble it with a screwdriver and no matter what, it will not open. I do however have the BT5260 model, but it appears to have been configured in the same way as the model in the video.
A tu instrukcja po Polsku dla BT9290 🇵🇱 ruclips.net/video/7dk15n1HS2Q/видео.html z dodatkową informacją, jak rozbierać takie sprzęty, aby ich nie uszkodzić
really thanks man
Thnx)
Can you please add details on replacement battery type. Perhaps even a link. Thank you.
You can use popular Sanyo 2xAAA NiMh 750mAh - it's better then no name battery. I used it and BT5270 works perfect and long on battery.