Thank you for the tutorial. Regarding the issue with wrong counting (i would get increments of 2 or 3 when just 1 should have been reported), I tried placing the sensors better as a comment here suggests but it would still be triggered 2 or three times. So I used a TOF timer on network 14 and 15, so that the positive trigger will be kept as ON for 2 seconds causing the sensor to not send a negative trigger (or lets say the counter not to accept one) then again a positive while the box is moving. This way for the period that the box moves through the sensor, it detects it only once.
Thank you for the video. I have solved the problem with wrong counting. Sensors (left and right) do not count boxes, but the pallet legs. Try to change the place of the sensors.
Hello sir. I am having a problem I have designed the project on factory io and written the code on Tia portal but only start and stop button that is working
While i connect S7PLCSIM driver, and following all the steps like compile....but still it is showing error that "can not connect to S7-PLCSIM V5. Please check that it's is running and try again"
hi, i had the same problem. in project tree right click on name of project (white sheet paper icon) and go to properties > protection and chceck "support simulation during block compilation".
=> Watch the Previous Video - Factory IO Scene for Sorting Boxes based on Height
ruclips.net/video/8jQbBHKuCrM/видео.html&pp=gAQBiAQB
Thank you for the tutorial. Regarding the issue with wrong counting (i would get increments of 2 or 3 when just 1 should have been reported), I tried placing the sensors better as a comment here suggests but it would still be triggered 2 or three times. So I used a TOF timer on network 14 and 15, so that the positive trigger will be kept as ON for 2 seconds causing the sensor to not send a negative trigger (or lets say the counter not to accept one) then again a positive while the box is moving. This way for the period that the box moves through the sensor, it detects it only once.
Thank you. It help me to solve this issue. It works now.
Thank you for the video.
I have solved the problem with wrong counting. Sensors (left and right) do not count boxes, but the pallet legs. Try to change the place of the sensors.
Hello sir. I am having a problem I have designed the project on factory io and written the code on Tia portal but only start and stop button that is working
Thx.bro 🎉🎉🎉❤❤❤❤❤❤
Hello sir, where is the project link. I can't find it
make video for warehouse
Sir, I have written the same code for emiter management but it does not emit any part. Can you show how the emitter is configured in FIO?
please in minute 11:00 how load convyer works and in the same time network 7 reset function in network 6
SIR PLEASE MAKE A VIDEO ON STACKER CRANE (WARE HOUSE )
While i connect S7PLCSIM driver, and following all the steps like compile....but still it is showing error that "can not connect to S7-PLCSIM V5. Please check that it's is running and try again"
hi, i had the same problem. in project tree right click on name of project (white sheet paper icon) and go to properties > protection and chceck "support simulation during block compilation".
SIR PLEASE MAKE A VIDEO ON STACKER CRANE