What a great video. I used to work with my Dad, who was finishing carpenter, from age 11- 17. I then left and went to university. I’ve taken up fine carpentry since retiring 8 yrs ago. I feel his presence with me all the time in my shop with fine tools he was unable to afford or unavailable. Your tips today are the most useful I have watched in a while, plus you didn’t ask me to buy any new equipment!👌. Keep it up. Anton’s Son carpenter
Accurate cuts are the foundation of a well-made box. Always ensure your tools are sharp and calibrated. For box panels, use a table saw or miter saw to achieve clean, straight cuts. To create seamless corners, try a 45-degree miter cut, which hides end grain and adds a professional look. Using a stop block on your saw ensures uniformity when cutting multiple pieces to the same length.
You are one of the better box-makers I've seen on YT, probably your alternate superpower next to your scroll-saw art... so thanks! I think your secret sauce is, you don't over-complicate the box. One suggestion that's worked for me - pre-finish the inside surfaces before doing glue to make that clean out easier.
There's another helpful tip about the Golden Ratio that makes it even easier to work with. As you said, you can find the length if you multiply the width by 1.618. But rather than divide the length by 1.618 to get the width, multiply it by .618 instead. Use the Golden Ratio with a leading 1 to find the larger side and without the 1 to find the smaller one.
In the late 80s, I started to make storage boxes for my stuff. I sized them to hold 6 of the square plastic freezer storage containers. The boxes are 9 5/8 by 13 1/4 inches. I was working as a carpenter and had access to a lot of T -111 5/8 plywood siding scrap. And I would pick up all the basement paneling people were putting by the curb ,for bottoms.Cost of materials was glue and 18 gauge brad nails. 5/8 seems just right, not to heavy, not to thin. I put a 1/4 by 5/8 dado on the front and back for strength and alignment.Over the years I have made more than 500. from 2 inches tall to 8 inches. Many in batches of 30 to 50. Sometimes I would just make piles of parts, sides, ends, or bottoms. Easier to store the parts than the raw material. All are painted grey, have a label holder and most are in the addition I put on the side of my garage to hold them. i give them to friends and family . I made 6 more last week from some light weight asian pine I got from a crate and ran thru my planer to 5/8.
The type of joinery you choose will define the box’s durability and style. Some popular techniques include: Miter Joints: Ideal for sleek, modern boxes, especially when reinforced with splines for added strength. Dovetail Joints: A classic choice for decorative boxes, offering a blend of beauty and structural integrity. Rabbet Joints: Simple yet effective, perfect for beginners looking for a clean and sturdy joint.
I love making boxes! Thanks to Newton Makes and all the other channels that specialize in woodworking tips and tricks to allow me to do so. Think I've made 75-80 over the last couple of years, all unique. Hopefully I'll learn how to post videos in the near future. Thanks again!
this is fantastic. I find myself hand making a lot of tools i see in principle using electronic mechanisms - next project was whatever the hell this tool is at 6:40. setting a digital gauge and then having dc powered reciprocating arm adjust distance has been incredible useful. i just swapped out for a squared bit. I really like the analog dial used on your machine it's just a bit too mechanical even for me when digital design for that comes a bit more natural. jealous of whatever that is haha
You won a subscriber today. Been making furniture for years, enjoy watching others with good skills, love your tips, very nice. Also a big fan of walnut.
Great stuff here. Without videos like this I could never hope to be a wood worker. I’m still not even close to calling myself that but I have hope. I’m learning now so I can have a good hobby when I retire from programming in 18 years. At this rate, with AI, maybe 10 years.
The lume is second to none. I have been wearing mine constantly especially with the orange dial. I even had a rare notice from a nonwatch nerd at church.
A five star rated video! Lot's of great little tips and bits of handy knowledge that is not included in any of several box making books I have purchased. I will become an avid follower of your videos.👍
Really like your channel dude. Big time fan of your box making skills and admire your design skills too. Very very good stuff, inspiring me to make more.
One of the first decisions in box making is selecting the right type of wood. Consider the lumber's grain pattern, color, and stability. Hardwood species like walnut, cherry, and maple are ideal for elegant boxes, while pine and cedar are excellent for rustic designs. Pay attention to lumber thickness-1/2-inch or 3/4-inch boards are typically ideal for box sides and lids, as they provide a balance of durability and aesthetic appeal.
The "use a stop block even when making the squaring cut" tip is an excellent one. I learned that the hard way after I spent an hour trying to understand why multiple squares were telling me the miter was square to the blade, but the resultant cut was not square. I was assuming all of my squares had a discrepancy between the outside edges and the inside edges and it was driving me nuts. It was just because as I was pushing the workpiece into the blade, the resistance was causing the workpiece to move ever so slightly during the cut, throwing it out of square.
I am a motion graphics artist and I also stage live events. I use the Golden Ratio in everything I do: videos, gardening, photography, landscaping, and woodworking.
Such a nice informative video. So sad that I only have jigsaw (I am grateful to that ofc) and I wish I have materials for everything. I hope, one day :)
You use the golden ratio to determine how thick or thin the box should be in relation to its size. Also, from an artist standpoint, its a compositional flow so open space is part of the ratio - and it's usually just done by eye (similar to how you figured out how thick or thin it should be). It's all pretty cool stuff that can apply to a lot of things!
Wow dude, I feel called out. I guess me and my chunky boxes will go where we are appreciated. Sometimes you just need a big ol pine fatty for a job site but nooo. No chunk boxes allowed. ;)
Thanks for all the tips! And here's a tip for you: if you get some self-sticking sandpaper and lay that on the face of your Miter Fence, wood doesn't slide around. And it will not mar the wood unless you intentionally slide the wood back and forth across the surface. I usually use about 120 grit, as that works just fine. One comment: you have to cover the entire surface. Otherwise, you're probably likely to have a piece of wood that it rocks back and forth on - you do not want that.
If people are worried about gluing across the grain they could always route a slot in the lid and use a bit thicker piece of wood and glue it in the channel. Then if the lid gets stuck and someone puts a lil too much english on it to get the lid off it won't get ripped off hopefully.
Thanks for the awesome tips! Enjoyed video and learned the simplest, most clever things today. Why do I miss all the simple efficient things on my own?! Thanks again! I will apply these skills to my box making moments
These are great tips. I like to make boxes. I’ve incorporated some of these along my journey. I picked up some new tips today that I can’t wait to try out.
If your worried about movement of the Pull tab you could glue the left side of the tab only and put a pin or dowel in the other, make a recession in the lid for the pin that's slightly larger either side for wood movment, as long as the pin didn't sit too loose it would still give you some purchase for pulling the lid open.
When you were tapping the bottom of the board to show the deep thud. I noticed you weren’t holding the pieces of wood in the same place. It is VITAL to hold them in the same exact position to get a fair and quality thump test. Any luthiers watching would likely agree
Very good tips, thank you. When you mix tung oil and mineral spirits, what is the proportion for each? Will it work good with a soft wood like parota? Or just for hard woods, if so, what do you recommend for patota. Thank you!
sweet looking box. Looking forward to checking out the videos on your other channel. I searched and searched but found no link to your other youtube channel in any of you sites/social media. I eventually found it by searching youtube, but I would have subscribed a long time ago if I had known about it.
Behind you on the shelves are a jack plane and a smooth plane. Please keep in mind,, I'm old, and a great deal of experience on job sites. Job sites do not always have a roof, the humidity is whatever the days is. I was taught and I teach, never place a plane on its sole. Always lay a plane on its side. A wooden shelf, even in a dead dry shop, still and always has moisture in it. And aside from the blush of rust from a wooden shelf that has a bit of moisture,, you are placing the plane bit,, that you so carefully honed, and set,, the perhaps sharpest edge in the shop, and you put it down on a surface. I don't even return the plane on the work,, I lift on the backstroke. My razor sharp blade is for cutting, nothing else. Place your planes on their sides when not in use. A plane side can be sanded if needed.
Yeah, I’m a box guy and have been making them for years and never thought to use a little adjustable square for the top or bottom groove. I may even shorten the blade on one for more accuracy on my tiny ones. I have been using one of clamping style paper clips with a couple of popsicle sticks in the past as miniature trammel device but that doesn’t allow for square like your adjustable square tip. Thanks again for making my making better! PS: have you ever thought of making a self portrait with your scroll saw??? All great artists do self portraits you know? I’ll be watching and waiting.
By the way, it's funny that you choose 3 for the height. Three times the Golden ratio is about five :-). That means you get a golden ratio looking down at the top or at the side. The Fibonacci sequence also has three, five, and eight in sequence. As you continue down the Fibonacci sequence the ratio of consecutive numbers gets closer and closer to the golden ratio!
Box looks great, Thanks ... I tried to purchase items off of U-tube and was not able to. How do I do it? I picked out the items they showed that they were in my cart but, I was not able to purchase it was plans for your wine rack and 3 - D cutting board. Thanks in advance
Additional note on the finish. Be careful not to thicken the lid or narrow the channel with the finish. Again, this is where an oil could be better than a varnish.
I don't know if I'd agree that a miter is a weak joint, it's surprisingly strong and a splined miter is ridiculously strong. Don't quote me on that though I just watched a guy put weight on joints
I make boxes like this as part of a side business. Before I used splines in my mitre joints my boxes would split at the joint when shipping them, especially in cold weather. I always recommend splines in smaller projects with mitre joints.
the only wood boxes i'm interested in are box-jointed on all 8 edges. that means they have no dadoed bottoms to rattle and waste space. you have to use p/w, and they're a little harder to build than standard boxes, but way worth it
I was going to say the same thing. A few pieces of 1/4" PVC cut at a 45° angle and stuck into (in my case) a scrap 2X4 will hold your blades and separate the for quick selection and use.
I have one like that. However, my wife did not steal mine. I found I do not like it because I put blades in the wrong tubes. We all have to do what works for our brain.
This, totally. -- I make something specifically requested by wife, with design consultations Wife: "It's okay. That will work." -- I throw together some rando thing just for me for a specific purpose in my own head Wife: "OMG it's beautiful... and it is mine now."
5 and 8 are two consecutive number of the fibonacci sequence. 8/5 is close to the golden number, 13/8 is closer, and so on the higher you go in the sequence.
Beautiful box there Billy wouldn't expect your scroll saw blades be in anything other than a stunning walnut box. Cracking video whole bunch tips away now to rewatch the box joint video gonna attempt this next few weeks. Wish me luck 👍🏴😬
You should. A hand plane can get you there too, but it takes a bit of knowing how to sharpen and set up the plane. For flatness, you can attach a large sheet of sandpaper to a true flat surface and lap it to flatness.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
GET THE BUILD PLANS TO THIS PROJECT HERE: newtonmakes.com/shop/p/timelesswoodbox
What a great video. I used to work with my Dad, who was finishing carpenter, from age 11- 17. I then left and went to university. I’ve taken up fine carpentry since retiring 8 yrs ago. I feel his presence with me all the time in my shop with fine tools he was unable to afford or unavailable. Your tips today are the most useful I have watched in a while, plus you didn’t ask me to buy any new equipment!👌. Keep it up. Anton’s Son
carpenter
Accurate cuts are the foundation of a well-made box. Always ensure your tools are sharp and calibrated. For box panels, use a table saw or miter saw to achieve clean, straight cuts. To create seamless corners, try a 45-degree miter cut, which hides end grain and adds a professional look. Using a stop block on your saw ensures uniformity when cutting multiple pieces to the same length.
Wow. Thank you for sharing.
You are one of the better box-makers I've seen on YT, probably your alternate superpower next to your scroll-saw art... so thanks! I think your secret sauce is, you don't over-complicate the box.
One suggestion that's worked for me - pre-finish the inside surfaces before doing glue to make that clean out easier.
I still have the pencil box that I made in highschool woodwork class 34 years ago and i still use it every day
I knew the sound of a mid-1960's Ford door closing, even when I was a kid. They sounded so much nicer than Chevys.
Excellent video. Thank you. I will watch this a few more times and go make me a box!
There's another helpful tip about the Golden Ratio that makes it even easier to work with. As you said, you can find the length if you multiply the width by 1.618. But rather than divide the length by 1.618 to get the width, multiply it by .618 instead. Use the Golden Ratio with a leading 1 to find the larger side and without the 1 to find the smaller one.
In the late 80s, I started to make storage boxes for my stuff. I sized them to hold 6 of the square plastic freezer storage containers. The boxes are 9 5/8 by 13 1/4 inches. I was working as a carpenter and had access to a lot of T -111 5/8 plywood siding scrap. And I would pick up all the basement paneling people were putting by the curb ,for bottoms.Cost of materials was glue and 18 gauge brad nails. 5/8 seems just right, not to heavy, not to thin. I put a 1/4 by 5/8 dado on the front and back for strength and alignment.Over the years I have made more than 500. from 2 inches tall to 8 inches. Many in batches of 30 to 50. Sometimes I would just make piles of parts, sides, ends, or bottoms. Easier to store the parts than the raw material. All are painted grey, have a label holder and most are in the addition I put on the side of my garage to hold them. i give them to friends and family . I made 6 more last week from some light weight asian pine I got from a crate and ran thru my planer to 5/8.
Great example of perseverance. 👍
The type of joinery you choose will define the box’s durability and style. Some popular techniques include:
Miter Joints: Ideal for sleek, modern boxes, especially when reinforced with splines for added strength.
Dovetail Joints: A classic choice for decorative boxes, offering a blend of beauty and structural integrity.
Rabbet Joints: Simple yet effective, perfect for beginners looking for a clean and sturdy joint.
thanks for your procedure on making boxes. i have made dressers and end tables but have been afraid of thos ebeautiful boxess thanks again.
Your humor made me instantly subscribe.
Me too, just now haha. I just instantly liked the guy 😁
I love making boxes! Thanks to Newton Makes and all the other channels that specialize in woodworking tips and tricks to allow me to do so. Think I've made 75-80 over the last couple of years, all unique. Hopefully I'll learn how to post videos in the near future. Thanks again!
this is fantastic. I find myself hand making a lot of tools i see in principle using electronic mechanisms - next project was whatever the hell this tool is at 6:40. setting a digital gauge and then having dc powered reciprocating arm adjust distance has been incredible useful. i just swapped out for a squared bit. I really like the analog dial used on your machine it's just a bit too mechanical even for me when digital design for that comes a bit more natural. jealous of whatever that is haha
Simple box... Beautiful work of art! No more words... just emotions.. Thank you for that!
Wow! Excellent tips! I already knew a few of them, but am quite impressed with the ones I didn't know! Thank you for sharing!
You won a subscriber today. Been making furniture for years, enjoy watching others with good skills, love your tips, very nice. Also a big fan of walnut.
Very awesome tips thank you
Great video , thanks.
Thank you!
Gorgeous! Oh my gawd, my love for wood is out of control. I love wood. 🫣
I am a contrast guy, so I would have done an oak or other lighter top with some dark wood inlay or a mix of both. great video.
beautiful! can't ever really go wrong with walnut!
Dude that little angled end of the table saw setup is pretty genius. I’ve never seen that.
Great stuff here. Without videos like this I could never hope to be a wood worker.
I’m still not even close to calling myself that but I have hope. I’m learning now so I can have a good hobby when I retire from programming in 18 years.
At this rate, with AI, maybe 10 years.
Nice job! Love the sliding lid. I never thought of making a box with one! Thanks
thank you , a very enjoyable video
The lume is second to none. I have been wearing mine constantly especially with the orange dial. I even had a rare notice from a nonwatch nerd at church.
Well done. I like the way you think.
Thanks
A five star rated video! Lot's of great little tips and bits of handy knowledge that is not included in any of several box making books I have purchased. I will become an avid follower of your videos.👍
Well thought out design, even the box’s sound. 👍🏼
I have found that if you cut the two outer joints first you can then use a marking knife to mark for the inner joints for a better fitting glue joint.
Just when you think you have learned all you need to know someone like you crawl out of the sawdust thanks for all the info well done 😊
subscribed. Absolutely love this. Thank you. I think I need to build a box tomorrow =)
you are amazing. thank you.
very nice. Bravo.
Really like your channel dude. Big time fan of your box making skills and admire your design skills too.
Very very good stuff, inspiring me to make more.
That offcut for the lid slot would make a great handle 😊
Thanks for the video. I've been wanting to make a jewelry box for the gal.
One of the first decisions in box making is selecting the right type of wood. Consider the lumber's grain pattern, color, and stability. Hardwood species like walnut, cherry, and maple are ideal for elegant boxes, while pine and cedar are excellent for rustic designs. Pay attention to lumber thickness-1/2-inch or 3/4-inch boards are typically ideal for box sides and lids, as they provide a balance of durability and aesthetic appeal.
The "use a stop block even when making the squaring cut" tip is an excellent one. I learned that the hard way after I spent an hour trying to understand why multiple squares were telling me the miter was square to the blade, but the resultant cut was not square. I was assuming all of my squares had a discrepancy between the outside edges and the inside edges and it was driving me nuts. It was just because as I was pushing the workpiece into the blade, the resistance was causing the workpiece to move ever so slightly during the cut, throwing it out of square.
I am a motion graphics artist and I also stage live events. I use the Golden Ratio in everything I do: videos, gardening, photography, landscaping, and woodworking.
Such a nice informative video. So sad that I only have jigsaw (I am grateful to that ofc) and I wish I have materials for everything. I hope, one day :)
You use the golden ratio to determine how thick or thin the box should be in relation to its size. Also, from an artist standpoint, its a compositional flow so open space is part of the ratio - and it's usually just done by eye (similar to how you figured out how thick or thin it should be). It's all pretty cool stuff that can apply to a lot of things!
Wow dude, I feel called out. I guess me and my chunky boxes will go where we are appreciated. Sometimes you just need a big ol pine fatty for a job site but nooo. No chunk boxes allowed. ;)
Excelente!
awesome
Just rewatched this video and was interested in your finish with poly and tung oil. I have used both but not together
Thanks for all the tips! And here's a tip for you: if you get some self-sticking sandpaper and lay that on the face of your Miter Fence, wood doesn't slide around. And it will not mar the wood unless you intentionally slide the wood back and forth across the surface. I usually use about 120 grit, as that works just fine. One comment: you have to cover the entire surface. Otherwise, you're probably likely to have a piece of wood that it rocks back and forth on - you do not want that.
If people are worried about gluing across the grain they could always route a slot in the lid and use a bit thicker piece of wood and glue it in the channel. Then if the lid gets stuck and someone puts a lil too much english on it to get the lid off it won't get ripped off hopefully.
rhank you
Thanks for the awesome tips! Enjoyed video and learned the simplest, most clever things today. Why do I miss all the simple efficient things on my own?! Thanks again! I will apply these skills to my box making moments
I'm sure you do things I've never thought about. Everyone can learn from each other.
These are great tips. I like to make boxes. I’ve incorporated some of these along my journey. I picked up some new tips today that I can’t wait to try out.
Very cool to hear!
If your worried about movement of the Pull tab you could glue the left side of the tab only and put a pin or dowel in the other, make a recession in the lid for the pin that's slightly larger either side for wood movment, as long as the pin didn't sit too loose it would still give you some purchase for pulling the lid open.
I’m not waiting til the end to comment….. thanks so much for your content man. I look forward to every new video!
dude your jigs are next level
I've been trying to make a simple box with these large box joints and each time they end up the wrong size. But I will get there!
When you were tapping the bottom of the board to show the deep thud. I noticed you weren’t holding the pieces of wood in the same place. It is VITAL to hold them in the same exact position to get a fair and quality thump test. Any luthiers watching would likely agree
Very good tips, thank you. When you mix tung oil and mineral spirits, what is the proportion for each? Will it work good with a soft wood like parota? Or just for hard woods, if so, what do you recommend for patota. Thank you!
sweet looking box. Looking forward to checking out the videos on your other channel.
I searched and searched but found no link to your other youtube channel in any of you sites/social media. I eventually found it by searching youtube, but I would have subscribed a long time ago if I had known about it.
Glad you were able to find it. It's a pretty sweet place to be!
Behind you on the shelves are a jack plane and a smooth plane. Please keep in mind,, I'm old, and a great deal of experience on job sites. Job sites do not always have a roof, the humidity is whatever the days is. I was taught and I teach, never place a plane on its sole. Always lay a plane on its side. A wooden shelf, even in a dead dry shop, still and always has moisture in it. And aside from the blush of rust from a wooden shelf that has a bit of moisture,, you are placing the plane bit,, that you so carefully honed, and set,, the perhaps sharpest edge in the shop, and you put it down on a surface. I don't even return the plane on the work,, I lift on the backstroke. My razor sharp blade is for cutting, nothing else.
Place your planes on their sides when not in use. A plane side can be sanded if needed.
Mikey likes it!
And Mikey has excellent taste. Nice reference
I was wondering what could make with the those small cutoffs sitting in the scrap box . Thanx
Yeah, I’m a box guy and have been making them for years and never thought to use a little adjustable square for the top or bottom groove. I may even shorten the blade on one for more accuracy on my tiny ones. I have been using one of clamping style paper clips with a couple of popsicle sticks in the past as miniature trammel device but that doesn’t allow for square like your adjustable square tip. Thanks again for making my making better! PS: have you ever thought of making a self portrait with your scroll saw??? All great artists do self portraits you know? I’ll be watching and waiting.
I feel like if I do a self portrait I'll have to cut off an ear and then people will wonder if I lost it in a severe scroll saw accident.
Go Vols!
The "GOLDEN NUMBER" for the Length, Width, & Height of a box is (wait for it...)
THE LENGTH, WIDTH, & HEIGHT OF WHAT YOU'RE PUTTING INSIDE IT!!!!
Always interesting to watch your videos, Bravo!
Awesome simple box! That’s worth selling!
If I ever choose to sell some, perhaps. I have four giant cardboard boxes filled with wood boxes.
He sounds like the woodworking version of the humble mechanic local Volkswagen Mastertech here on RUclips
Came for the box tips, stayed for the walnut finish
By the way, it's funny that you choose 3 for the height. Three times the Golden ratio is about five :-). That means you get a golden ratio looking down at the top or at the side.
The Fibonacci sequence also has three, five, and eight in sequence. As you continue down the Fibonacci sequence the ratio of consecutive numbers gets closer and closer to the golden ratio!
Box looks great, Thanks ... I tried to purchase items off of U-tube and was not able to. How do I do it? I picked out the items they showed that they were in my cart but, I was not able to purchase it was plans for your wine rack and 3 - D cutting board. Thanks in advance
Shoot me an email through my website 👍
Stunning box, Billy! Really amazing work! 😃
Stay safe there with your family! 🖖😊
Thanks! It looks too pretty for blades now. 😂
Additional note on the finish. Be careful not to thicken the lid or narrow the channel with the finish. Again, this is where an oil could be better than a varnish.
I don't know if I'd agree that a miter is a weak joint, it's surprisingly strong and a splined miter is ridiculously strong. Don't quote me on that though I just watched a guy put weight on joints
I make boxes like this as part of a side business. Before I used splines in my mitre joints my boxes would split at the joint when shipping them, especially in cold weather. I always recommend splines in smaller projects with mitre joints.
Here's an interesting lid.
Lets assume 1/2" material. Make the box 1/2" taller than you want. Before gluing all 6
Another great video. Not too much talking as I like things explained to me.
the only wood boxes i'm interested in are box-jointed on all 8 edges. that means they have no dadoed bottoms to rattle and waste space. you have to use p/w, and they're a little harder to build than standard boxes, but way worth it
How do you measure the groove for the router bit so you don’t go all the way through so you don’t have a hole
1960's Ford car doors had their own sound.
I had two 60s Fords. I feel you on this.
The way you store wood reveals how expert you are!!
A thought. If you had enough wood to make the box before you resaw you then probably have enough to make two boxes while you are in box making mode.
I made me a saw blade holder for my scroll saw blades once out of pvc pipe. My wife stole it for her crochet hooks.
I was going to say the same thing. A few pieces of 1/4" PVC cut at a 45° angle and stuck into (in my case) a scrap 2X4 will hold your blades and separate the for quick selection and use.
I have one like that. However, my wife did not steal mine. I found I do not like it because I put blades in the wrong tubes. We all have to do what works for our brain.
Aye, sounds like our house
You should have put HER in a box... ⚰.. 😌... 😂
This, totally.
-- I make something specifically requested by wife, with design consultations
Wife: "It's okay. That will work."
-- I throw together some rando thing just for me for a specific purpose in my own head
Wife: "OMG it's beautiful... and it is mine now."
5 and 8 are two consecutive number of the fibonacci sequence. 8/5 is close to the golden number, 13/8 is closer, and so on the higher you go in the sequence.
Great video 👌👌. Nice to hear someone talking about the golden ratio. Love the lid I’m going to try that. Thank you
Beautiful box there Billy wouldn't expect your scroll saw blades be in anything other than a stunning walnut box. Cracking video whole bunch tips away now to rewatch the box joint video gonna attempt this next few weeks. Wish me luck 👍🏴😬
I really like those style joints. They aren't too busy looking and they're strong.
@@NewtonMakes yea a love them to just need try make one. 😬🏴👍
👍👍👍👍👍
I have everything to make something like this, but no drum sander or planer. Can I just use a ROS after resawing the wood, to smooth it out?
You should. A hand plane can get you there too, but it takes a bit of knowing how to sharpen and set up the plane. For flatness, you can attach a large sheet of sandpaper to a true flat surface and lap it to flatness.
Good idea. I don't have a hand plane, just a couple of small block planes.
I see you use a drum sander a lot. @2:50 what brand of drum sander do you use/recommend?
There's a link in the video description to it. I can't work without one. Fantastic tool
Billy, you're really full of .........................a lot of great tips (gotcha lol). Tool Shop clamps means you shop at Menards.
Bill
I tend to dabble within the great halls of Menards. It's the best place to buy a toilet, couch, and 20lbs of cereal at the same time.
@@NewtonMakes Yep. I'm going again today.
GO VOLS!!
Great format for a tips video!
Thanks
Thanks, I didn't want it to just be a list.
Nice and thanks for the tips. Did learn a few things at 80. Never too old. Top is outstanding. JimE
Awesome to hear!
Thank you. This video helped me very much
Great tips. Thanks Much!
Oh man, do I love the look of walnut. ❤
That box has too much beauty to just hold scrollsaw blades.
My original plan was to put them in a rosewood and brass box I previously made. We ain't poor and basic when it comes to boxes for scroll saw blades 🤣
You're awesome my man! I love watchin your videos!
Very cool looks great
most YT carpenters are also comedians now... Aside from that, good boxing tips.
Super lid!
Nice job! I love the shirt! GO VOLS!