Tanks for this video sir the video is the super 👌👌👌👌👌☺☺☺🙂🙂🙂🙂 you do the majik sir I did this project sir In school I take the first prize so tank you sir ☺☺🌹🌹🌹💐💐💐💐💐💐💐🙏🙏🙏🙏🙏🙏☺☺☺☺☺
Hi! I have a few questions. I guess you used 1.5 v cells. If you add a buzzer, or a motor, do you have enough energy or you need an extra cell? Another question. This is a single wire, at home I have some electric wire which looks like two wires together, two different colours, what kind of wire is it? In the past I used crocodile wires and I don't quite understand this "double" wire. Last question: if you used a 4,5v cell would the led "burst"? Would a few little 1,5v bulbs or LEDs offer resistance and work fine with a 4,5 cell? Thank you! Sorry, I don't know much about circuits and I can't quite find what I am looking for on the internet (answers to my questions)
2nd: the wire can be separated into two single wires. The different colours do not matter much. Just almost the same. Use one of the colors to make an electric circuit
Thank you for your suggestion. Using paper was intended for making uy easy to do since getting paper is easier than getting a wooden board. Using a wooden board will make it harder because there are many other steps to do that not everyone can provide the items.
1. You have to check every component because it didn't work. The problem could be the wire or the bulb, or the battery you used was too strong or too low 2. This is not fake. Many people have tried this. I did too 3. Don't easily judge before analysing everything
Is there any difference these electric circuit items from yours? If there is no, try to check the bulb and the cells whether they work nornally or not before applying to the circuit. Try to check the wire connected to the bulb since the bulb has two different length, for positive and negative symbol, , make sure they are in line with the same symbol in the cell
Thank you for this, my niece needed one that doesn't require a switch.
Glad I can help
Interesting projected
Wow😁
Vair cool
thanks for helping my school project
your video help me alot thank u
You're welcome. I am glad I can help
Thankyou Mr adin Indians is the best in youtuber in this project
Easy
Coya galingnin u po😊
What does it mean?🤔
I am Kenneth, I make with media switch to turn off an on the lamp. Because i scared. Its work. Thanks Mr.
Congratulation. No need to be afraid. The electric power from batteries is not that high. Anyway, well done
Bro i was gonna fail but you saved me
Glad to hear you finally make it. Congrats
I am Emily, l've made it. It's quite easy to do. Mine works well, although I'm afraid at first, afraid got electric shock 😀
Well done emily. The electrical energy from batteries won't give you strong electric shock. You can use gloves for protection if you are afraid
EA
it does not shock me the wire just turns hot
@@mr.adinindonesia6226 l have an assignment to do and l think this is easy enough 🌝🙆❤️❤️❤️
Tanks for this message
Thank you for your help
You're welcome.
THNKS FROM INDIA
You're welcome 🙏
I am Howard, I've made it. It was quite easy to do. Mine works well. Mine is different from the video because the one in the video is too dangerous.
it's not dangerous. By the way, congrats for doing it well. You can be a genius one day
If I used the one in the video i might get shocked and die
EA
Tanks for this video sir the video is the super 👌👌👌👌👌☺☺☺🙂🙂🙂🙂 you do the majik sir I did this project sir In school I take the first prize so tank you sir ☺☺🌹🌹🌹💐💐💐💐💐💐💐🙏🙏🙏🙏🙏🙏☺☺☺☺☺
You're welcome 🙏. Congratulations 👍👍👍
Tanks for your coment 🙏☺❤❤☺☺☺🙂🙂
No problem
Your my best friend sir☺💐🖐👍
🙏🙏
Hi! I have a few questions. I guess you used 1.5 v cells. If you add a buzzer, or a motor, do you have enough energy or you need an extra cell? Another question. This is a single wire, at home I have some electric wire which looks like two wires together, two different colours, what kind of wire is it? In the past I used crocodile wires and I don't quite understand this "double" wire. Last question: if you used a 4,5v cell would the led "burst"? Would a few little 1,5v bulbs or LEDs offer resistance and work fine with a 4,5 cell? Thank you! Sorry, I don't know much about circuits and I can't quite find what I am looking for on the internet (answers to my questions)
🤣
imagine exactly doing this
Answer for the 1st question. Two 1.5 cells are enough for a buzzer or a motor. I have tried that
2nd: the wire can be separated into two single wires. The different colours do not matter much. Just almost the same. Use one of the colors to make an electric circuit
3rd. Using 4.5 cell will make the small bulb light for few seconds and then broken. The power is too big
this guy is my teacher
True mine too
Yo mom too
Cool
Thank you very much 💕
You're welcome
I am lionddy dafenline lay i already Made it ITS quite easy Ive done a experiment and it works
Well done Lionddy. You've learned well
EA
@@lionddyp3334 UE
Nice video, thanks for the info :)
you're welcome
Kreatif bang 👍👍
Makasih ka
Thanks 🙏
You're welcome 🙏
Will two 1.5 V cells work with a 15W non screw type incandescent bulb? Thanks for the awesome video
You need bigger cells for 15W. 2 1.5 cells won't enough. You can experiment it
@@mr.adinindonesia6226Understood, thank you for replying sir.
You're welcome. Good luck then
Makin one
🙏
Tq 💓
You're welcome
I have a question how many wires do we need?
Sorry just reply. 1 meter wire is enough. Just cut it into few pieces
2 meter wire is better
Thx
No problem
I really can't see how you connected the wires with the bulb
You just need to spin the wire to the bulb edges
Thank you for asking
Ok
सेल सेल कौन सी साइट को है
Merci
And my science teacher is going to kill me if I don’t bring a working light bulb
mag ap deyt papoka u ng elictro magnit
This is a real
Sure it's real
Please in telugu
I can't speak in Telugu 🙏
Thank you for completing my project brother
My pleasure
Mine too
Hi
Hi there
@@mr.adinindonesia6226 chào
Kskwlqlqlkskqow
Mine keeps failing
Use sticky tape to make it stay in place
@@mr.adinindonesia6226 ya
😢
What's wrong?
لم افهم شيئا
Afwan, english language video, not arabic 🙏
Cap!!!!
Please not use paper
Thank you for your suggestion.
Using paper was intended for making uy easy to do since getting paper is easier than getting a wooden board. Using a wooden board will make it harder because there are many other steps to do that not everyone can provide the items.
bruh it dosent work i thing this is lying
You better check everything out first before making wrong conclusion. One of the components you have (battery, wire, or bulb) could be damaged.
So fake because I tried it with a new battery fresh battery but it didn’t work
1. You have to check every component because it didn't work. The problem could be the wire or the bulb, or the battery you used was too strong or too low
2. This is not fake. Many people have tried this. I did too
3. Don't easily judge before analysing everything
Baad me jaa
It didn't work
Is there any difference these electric circuit items from yours?
If there is no, try to check the bulb and the cells whether they work nornally or not before applying to the circuit.
Try to check the wire connected to the bulb since the bulb has two different length, for positive and negative symbol, , make sure they are in line with the same symbol in the cell
I ts real thank u bro
You're welcome
Easy
I tried😭
It's not easy 😭