Good Day Sorry it took so long to respond but I missed this. This machine is running a leopard 4082 2000kv at 6s. The esc is a Swordfish X + 220 AMP. Unfortunately I cant share the prop details as that's the secret sauce!! 40 % of your power and speed comes from figuring out the right prop setup. I can tell you that this prop is Race Balanced and sharpened. That's a big key to getting this thing into the 60mph range. This setup pulls a crazy amount of power so all fittings need to be crimped vs soldered as the solder will just turn to liquid. I've data logged this run and its peak draw was 5036 watts!!!
@@raydash2898 funny thing is this is not very fast, there are 33fe’s doing 78mph. 65 mph is 4s speed. never the less its great to see a 33 fe run even at just 65, they are so good looking on the water.
Nice build , on 6s you should be in the 70+ mph i think you need a diffrent prop or maybe the gps its not reading properly , pulling 5000 watts for 64mph something its not adding up.
I was just using a 1715 prop I had on hand which wasn't race balanced either. Race balanced & sharpened 1716 would be much closer to ideal. I got busy with life and never ordered the 1716s
@@rcscalebuilders8268 I got a jae 21fe tp 3650 2350kv octura x447/3 doing 82mph on 6s the jae don't benefit from lifting props cos they get the lift and ride on their rear skid i think a m545 or a cnc 5014 will push that boat a lot faster .
@@aldocarr3653 Cool. Thanks for the tip. I actually have a pair of 447s race balanced and sharpened by Chris as Dasboata. They're for my Zelos Twin . Ill have to throw one of those on there and see how she does.
Good Day Sorry it took so long to respond but I missed this. This machine is running a leopard 4082 2000kv at 6s. The esc is a Swordfish X + 220 AMP. Unfortunately I cant share the prop details as that's the secret sauce!! 40 % of your power and speed comes from figuring out the right prop setup. I can tell you that this prop is Race Balanced and sharpened. That's a big key to getting this thing into the 60mph range. This setup pulls a crazy amount of power so all fittings need to be crimped vs soldered as the solder will just turn to liquid. I've data logged this run and its peak draw was 5036 watts!!!
Good Day Sorry it took so long to respond but I missed this. This machine is running a leopard 4082 2000kv at 6s. The esc is a Swordfish X + 220 AMP. Unfortunately I cant share the prop details as that's the secret sauce!! 40 % of your power and speed comes from figuring out the right prop setup. I can tell you that this prop is Race Balanced and sharpened. That's a big key to getting this thing into the 60mph range. This setup pulls a crazy amount of power so all fittings need to be crimped vs soldered as the solder will just turn to liquid. I've data logged this run and its peak draw was 5036 watts!!!
Bro on 6s I'm in the 75 range with a sss 1750kv and a flycolor esc you need to do some prop testing and that looks a little faster then your GPS is claiming to me hard to tell with the small straights you got but going with a t.s neo or sss never had any luck or speed with a leopard if there some prop guys on intl waters that can. I use my man at dasboata prop the best prop guy out there he will Race prep the right prop but you should be faster my little 26 is faster on 4s and you don't need that much lift on your prop with the riggers
Good Day Sorry it took so long to respond but I missed this. This machine is running a leopard 4082 2000kv at 6s. The esc is a Swordfish X + 220 AMP. Unfortunately I cant share the prop details as that's the secret sauce!! 40 % of your power and speed comes from figuring out the right prop setup. I can tell you that this prop is Race Balanced and sharpened. That's a big key to getting this thing into the 60mph range. This setup pulls a crazy amount of power so all fittings need to be crimped vs soldered as the solder will just turn to liquid. I've data logged this run and its peak draw was 5036 watts!!!
Hello Friend, The prop in the test is a balanced and sharpened ABC 1715 but that's just what I had . A 1716 would be much better. Also it's important to know that a huge amount of your prop performance comes from Balancing and Sharpening. The best Balancing & Sharpening is done by a guy named Chris who owns DasBoata.com. He will unlock crazy amounts of power and speed hidden inside of a stock prop. I need to get mine out again. I built it in 2018 and then got busy with other stuff. Mainly RC Heavy Machinery you can see in my other vids. Thanks for watching.
Good Day
Sorry it took so long to respond but I missed this. This machine is running a leopard 4082 2000kv at 6s. The esc is a Swordfish X + 220 AMP. Unfortunately I cant share the prop details as that's the secret sauce!! 40 % of your power and speed comes from figuring out the right prop setup. I can tell you that this prop is Race Balanced and sharpened. That's a big key to getting this thing into the 60mph range. This setup pulls a crazy amount of power so all fittings need to be crimped vs soldered as the solder will just turn to liquid. I've data logged this run and its peak draw was 5036 watts!!!
hello! if you dont mind, may i ask in what category in youtube did you chose when uploading this video on youtube? TIA
@@crackidea7201 unfortunately I have no idea. I posted it quite a while ago. Is that something I can check somewhere?
@@rcscalebuilders8268 that’s fine. Thank you for the reply 😊
LOL, these guys and their "secret props"
@@raydash2898 funny thing is this is not very fast, there are 33fe’s doing 78mph. 65 mph is 4s speed.
never the less its great to see a 33 fe run even at just 65, they are so good looking on the water.
That thing Swift seems pretty stable too
Thanks for taking a look.
Its very speed 😜
Thank You very much for watching . My construction machines are also very fun to watch.
Nice build , on 6s you should be in the 70+ mph i think you need a diffrent prop or maybe the gps its not reading properly , pulling 5000 watts for 64mph something its not adding up.
I was just using a 1715 prop I had on hand which wasn't race balanced either. Race balanced & sharpened 1716 would be much closer to ideal. I got busy with life and never ordered the 1716s
@@rcscalebuilders8268 I got a jae 21fe tp 3650 2350kv octura x447/3 doing 82mph on 6s the jae don't benefit from lifting props cos they get the lift and ride on their rear skid i think a m545 or a cnc 5014 will push that boat a lot faster .
@@aldocarr3653 Cool. Thanks for the tip. I actually have a pair of 447s race balanced and sharpened by Chris as Dasboata. They're for my Zelos Twin . Ill have to throw one of those on there and see how she does.
@@rcscalebuilders8268 Fantastic, hope you get great results let us know how you go.
Tell us about the setup, motor, esc and prop?
Good Day
Sorry it took so long to respond but I missed this. This machine is running a leopard 4082 2000kv at 6s. The esc is a Swordfish X + 220 AMP. Unfortunately I cant share the prop details as that's the secret sauce!! 40 % of your power and speed comes from figuring out the right prop setup. I can tell you that this prop is Race Balanced and sharpened. That's a big key to getting this thing into the 60mph range. This setup pulls a crazy amount of power so all fittings need to be crimped vs soldered as the solder will just turn to liquid. I've data logged this run and its peak draw was 5036 watts!!!
Hello mate, I have a JAE 33 FE with the same motor and controller as you, can you tell me what propeller you have on the video test, thanks
Whats the Motor, ESC, Battery, and Prop size.... do share... THANKS
Good Day
Sorry it took so long to respond but I missed this. This machine is running a leopard 4082 2000kv at 6s. The esc is a Swordfish X + 220 AMP. Unfortunately I cant share the prop details as that's the secret sauce!! 40 % of your power and speed comes from figuring out the right prop setup. I can tell you that this prop is Race Balanced and sharpened. That's a big key to getting this thing into the 60mph range. This setup pulls a crazy amount of power so all fittings need to be crimped vs soldered as the solder will just turn to liquid. I've data logged this run and its peak draw was 5036 watts!!!
greetings good night you have a video of the assembly of the outrigger 33 thank you
Bro on 6s I'm in the 75 range with a sss 1750kv and a flycolor esc you need to do some prop testing and that looks a little faster then your GPS is claiming to me hard to tell with the small straights you got but going with a t.s neo or sss never had any luck or speed with a leopard if there some prop guys on intl waters that can. I use my man at dasboata prop the best prop guy out there he will Race prep the right prop but you should be faster my little 26 is faster on 4s and you don't need that much lift on your prop with the riggers
he bought this boat from a friend i know he does not what motor esc prop and so forth
Good Day
Sorry it took so long to respond but I missed this. This machine is running a leopard 4082 2000kv at 6s. The esc is a Swordfish X + 220 AMP. Unfortunately I cant share the prop details as that's the secret sauce!! 40 % of your power and speed comes from figuring out the right prop setup. I can tell you that this prop is Race Balanced and sharpened. That's a big key to getting this thing into the 60mph range. This setup pulls a crazy amount of power so all fittings need to be crimped vs soldered as the solder will just turn to liquid. I've data logged this run and its peak draw was 5036 watts!!!
I build keps 21
That's Awesome. I looked at those before I got the JAE. How do you like it?
I guess if were going to run a boat of any kind I would have the basic info....... go figure.
Hello mate, I have a JAE 33 FE with the same motor and controller as you, can you tell me what propeller you have on the video test, thanks
Hello Friend,
The prop in the test is a balanced and sharpened ABC 1715 but that's just what I had . A 1716 would be much better. Also it's important to know that a huge amount of your prop performance comes from Balancing and Sharpening. The best Balancing & Sharpening is done by a guy named Chris who owns DasBoata.com. He will unlock crazy amounts of power and speed hidden inside of a stock prop. I need to get mine out again. I built it in 2018 and then got busy with other stuff. Mainly RC Heavy Machinery you can see in my other vids. Thanks for watching.