Four Commonly Held Myths of EMC Design

Поделиться
HTML-код
  • Опубликовано: 26 сен 2024

Комментарии • 7

  • @retokeller1400
    @retokeller1400 Год назад +1

    Todd is just a fantastic EMC design engineer. Thank you for this interview.

  • @elliott614
    @elliott614 Год назад

    In the description, I'm assuming by "get" it's supposed to be "gap"? As in "Don't gap your ground [return] plane, there's never really any reason to do that"

  • @pfabri
    @pfabri 3 года назад

    From Bogatin's _Signal Integrity Book_ [p.506]:
    'We should remove the term _differential mode_ from our vocabulary and then we will never be confused between odd-mode impedance and differential impedance. They are completely different quantities. There are odd-mode impedances, differential signals, and differential impedances. [...] The odd-mode impedance is the impedance of one line when the pair is driven in the odd-mode state. The differential impedance is the impedance the differential signal sees as it propagates down the differential pair. [...] *There is no such thing as differential mode. Forget the word and you will never confuse differential impedance with odd-mode impedance.* '
    So, in my opinion the correct answer is a.) Differential mode is not defined.

  • @sergeyivanov3453
    @sergeyivanov3453 3 года назад

    Yes, please invite him wink wink :-)

  • @IgorPshynyk
    @IgorPshynyk 3 года назад

    не очем. Много слов, нет реальных советов.

  • @shaolintexchrislightninga.8234
    @shaolintexchrislightninga.8234 3 года назад

    Long