We drilled holes in the frame... | '09 WR450 Rally Build [EP. #3]

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 3

  • @thomasmoser7382
    @thomasmoser7382 3 года назад +1

    i love the look of rally bikes (especially the look of the big front fairing with the navigation tower), now i almost want to build one myself ^^ just a little tip for the next time you need precise holes, if you want a 8mm hole you can just start the hole with a 8mm drill but only slightly push it against the metal, that way you have a center mark where the drill rubbed against the metal (be careful to not damage the "guide" aka the part you hold up against it). you also can just use the 8mm drill like a center punsh, put it in tap it slightly, rotate it a bit counter clockwise tap it again, do this like 3 or for 4 times and you also will end up with a center mark. at least that's the way i do it all the time ;)

  • @amsterdamsk8ter
    @amsterdamsk8ter 3 года назад +1

    Keep up the good work guys!! Looking forward to the next episode!

  • @gumbysenduro6546
    @gumbysenduro6546 3 года назад +1

    You bet i would do this but getting a secondhand rally kit for a 07 WR450f in Australia is like rocking horse shit :)