Unlock Apple CarPlay & Android Auto for Free: Transform Your Toyota Now | epic
HTML-код
- Опубликовано: 7 июл 2024
- Upgrade Your Toyota Infotainment: Ultimate Guide to Apple CarPlay & Android Auto Installation (EU 2019-2021) using firmware update.
The following models are compatible with the firmware so far:
DCU model: Denso/Fujitsu
- 17TDT1EU-CA01
- 17TDT1EU-CA02
DCU model: Panasonic
- 17TDT1EU-DA01
- 17TDT1EU-DA02
- 17TDT1EU-DA30
- 17TDT2EU-DA01
- 17TDT2EU-DA02
- 17TDT2EU-DA30
Link to download the firmware:
Like the video and subscribe to the channel in appreciation, before requesting the file.
drive.google.com/file/d/1MRXI...
#androidauto #applecarplay #automobile #car #easyupgrade #freeupgrade #toyota #lexus #freeinstallation #toyota #rav4, #androidauto #applecarplay #easyupgrade #rav4 ,#carplayrav4 
Хобби
HUGE THANKS to Costel !!!!
For anyone saying, that this does not work, you need to FIRST check the compatibility of your multimedia and THEN extract the files as shown in the video.
In my car it was completely different as a process, but the outcome the same.
Buddy, cannot thank you enough actually !!
Greetings from Germany
Glad it worked mate!
Enjoy your updated unit!!
What was your model unit, and as well what was different perhaps others got the same and unsuccessfully completed!?
@@CostelTarata model Number:
17TDT1EU-DA31
As I said the process was different. In the way that I turned the engine on first and at the same moment stuck the USB stick under the Multimedia unit.
Then the multimedia restarted. A few seconds after a grey screen appeared with all the information of the stick.
For at least 20min I did nothing other than wait for the process to end.
In the 20min the multimedia restarted multiple times.
At the end I was asked to turn the engine off and on, so that the software could be installed.
The rest is history 😎
Hi Costel, you are an absolute gem, you have provided what Toyota said to me can't be done, works like a dream, thankyou so much 🎉
Hi Costa,
You are the MAN !!!!
Toyota Service told me, that next to the SW, they need to replace the cars Mic + 3 hours of work and wanted to charge 190 EURO.
Following your instructions worked like a charm and saved me a lot of money, so thanks a bunch !!!
Needless to say, I liked and subscribed 🙂
Keep up sharing and give us good tips !
Glad it helped mate!
cheers brother, I wish I could have bought you a beer my man. Spared myself 400 EUR to the dealer
Next time!😊
I have been looking for this video for so long. Great video,your method works and it only took 5 minutes.
Great to hear!
Did u put just the folder whit all file on a USB…
@@fw1367 yes you have to make sure that you’re checking the video I made and you open after you download the folder and copy paste everything as it is there
@@CostelTarata thanks. 👍🏻
bro you are the best! I was searching for this update for months and the toyota couldn’t help me! now i just following your steps and i have toyota raf4 07/2019 with carplay ! thank you very much!
Glad I could help file, na eisai Kala!
Works great🎉 just did this for my Irish 2019 RAV4 hybrid. The dealer in Sandyford was useless.
Mine has the CA01 infotainment unit.
Android Auto works great! Seamless. Flawless.
Anyone in Ireland that wants the USB drive, it's yours.
Thanks again 👏
I am in Cork Martin, and a bit stuck for some reason. the USB just won't recognise my Drive for some reason
@@DiarmuidtI'd post the USB stick to you if there is a safe way for you to give me your Eircode
Good to hear! Also have the CA01 unit. Will have a go.
Just to say thank you very much, it did worked ,sending you a £5 for a great help❤
Worked perfectly!
*RAV4 2019 - DCU 17TDT1EU-CA01*
*Before update:*
- Audio: 1141
- Navigation: 1520
- navdb_version: A36-4
*After 10 minutes of updating and restarting the engine:*
- Audio: 1257
Tested with USB cable, Apple CarPlay, and Android Auto - both work perfectly.
Thank you for sharing!
Happy that it worked mate!!
Everything done in 10 minutes. Amazing. Thanks, Costel!
Glad it worked mate! What car and radio unit you have ?
@@CostelTarata RAV4 as you, with Fujitsu firmware 17TDT1EU-CA01. The radio unit is from the factory.
All perfect in a corolla 2019 (17TDT1EU-DA02) no NAVI .
My process was different than from what is seen in your video ....I bought a new USB, which is already in Fat32 from the factory and I put the unzipped files in it. Once the USB was inserted into the car, it automatically detected it and carried out the process, restarting itself many times . The process took approximately 30-40 minutes (in your car only 7 min).
Thank you very much Costel U are the best.
Glad it helped mate!
many thanks for the helpful video. All works flawlessly. kudos mate
Glad it helped❤
Sent you over a fiver for a beer or coffee. Very happy with your efforts.
Much appreciated! Glad it helped!
Really magic happened!!! I have done the same steps and everything is perfect. Thank you very much it is the best tutorial!!!
Glad it helped mate!
I just want to thank you for your video about this firmware update, I made it just as you did and everything is perfect!
thank you again!
Glad it helped!!!
Great video, worked like a charm!
thank you for sharing and glad it helped!
worked great! easy as shown!
Glad it could help mate!
Every thinks work fine.
Thanks Costel 😊 Amazing . After 4 year with Toyota rav4 2020. Denmark Europa
glad it helped. Can you leave your infotainment UNIT model and as well whether you had NAVI or not ?
@@CostelTarata Model DCU 17TDT1EU=CA32 No Navi
Thanks!! Worked fantastic. Pay attention - use at least 32 gb Fat32, copy all the exctracted files from the compressed file in the link. Let the car do the rest. Worked on corola space 2019
Glad it worked mate, do you have valid navigation as well or it was a non navigation unit? Also, is your car with EU specs ?
@@CostelTarata no nav, I think its European specs. Im from israel so im not sure
You could check the version from settings->system info or firmware version. I bet there are many out here that want to know, before they try also
Mulțumesc frumos a funcționat perfect în Toyota Rav 4 2019 👍👍👍👍
Ma bucur, ce model infotainment ai ?
Works perfectly!!! Thanks!!!
Great to hear! Enjoy AA or CarPlay!!!!
Thank you dude 👍
Glad that it helped!
Salut. Multumesc mult. You the one.
Info on upgrading the Unit with NAVIGATION:
Hi. Thanks for upload. Installed it according to your instructions and it works. Sometimes I need to "activate" phone for Carunit to recognize AndroidAuto (but usualy detects it on its own). This means I have to touch phone screen or push one of buttons on the phone. I connect through cable. As for people asking regarding Unit with navigation. I installed it on RAV4 Hybrid MY2019 (one of the first of new models in country as it was showroom model) with Touch2Go + NAVI. Therefore I can confirm it works with the unit that is originaly shipped with navigation. After update all maps remained and I can still use "original" navigation if needed. Must say, that I didn't upgrade maps since end of 2022 when initial 3 year subscription expired.
Before update:
ID DCU 17TDT1EU-CA01
ID MEU 17TMT2EU-FA00
Audio: 1105
Navigation: 1512
Map: 2022 v2
After update:
ID DCU 17TDT1EU-CA32
ID MEU 17TMT2EU-FA00
Audio: 1257
Navigation: 1512
Map: 2022 v2
Glad it helped mate!
I'm so glad it worked in your car! I tried on my Corolla Hatch Hybrid 2019 (more info below) with 2023 maps and still didn't work. But I'm glad it works on some cars with GPS 🎉
ID DCU: 17TDT1EU-DA02
ID MEU: 17TMT2EU-FA00
Audio: 1020
Navigation: 1520
Maps: 2023 v2
Can confirm that worked on my Toyota RAV 4 2019 Hybrid with Navi. Everything installed and working wireless with carlinkit 5.0. Thanks, you saved tons of money from Toyota service
@@AnubisKingPL cool that worked mate
It worked well. Make sure installation file isnt in a folder. Thank you!!!!
Glad it helped. Let us know for the Prius as well!
How'd you do that ?
I'm from Israel, for anyone who has an Israeli car, it works ,God bless you, I did step by step, everything works fast and perfect!!!!!!
Glad it worked mate ! What car model and unit you have?
Rav 4 , And the same media version as appears in the video
Not exactly the process as shown on the video, but in the end it worked. Thank you
Happy that it worked.
Let me know what car you installed on and what infotainment version!?
@@CostelTarata 2020 Corolla in Greece
Version: 17TDT1EU-DA02
@@Paul77715i have the same version, i will always gett 002 error
thank you very much ! all went well
Glad it helped! let us know your feedback
What kind of USB stick did u use. Usb2.0 or usb3.0 ?
Success for me,!! Thank you
Took about half an hour
Wouldn't work until I took out the installation files from the folder.
Finally it worked. It take about 40minutes. DA02 Unit. Thanks. 🙏🏻
Glad it helped. What was the issue? And why so long? You mean with fixing the usb as well?
@@CostelTarata i did get a new USB-stick. The prosecc did take so Long to install. Did not look same as your install.
It look like a old dos Cmd install in old Windows
I think it flash Both dcu and dcm unit.
@@fw1367 important is that is working
Thank you very much!
Cheers mate
Thanks
It worked for me too, but make sure that the phone is set when you connect the usb cable to Android auto mode. Many thanks!
Glad it helped mate. Cheers
I initially used a multiple downloader and decompressing of files failed. Don't use multiple downloaders, use only regular download function of your browser. I plugged USB flash and started engine. Whole procedure took about 45 minutes. It restarted some 15-20 times, do not interrupt the process and wait patiently until you see "update complete remove usb flash and restart". The procedure was completed successfully.
Does your car have navigation enabled? To help the others they tried ?
Mine is without, as per the video instructions
Glad that it helped mate! Mine has no navi and both apple carplay and android auto work with cable only. There are few ppl here with navi that they struggled on getting it to pass the “installation failed screen” so if you can share your experience on this it will help a lot.
@@CostelTarata No navigation. Everything goes fine, no error messages. Some parts of update maybe more than one times but that was every time different things I think. For built in navigation necessary additional antenna module. Your software link exactly for no built in navigation cars.
@@CostelTaratacould you maybe „deactivate“ the navigation? I got the Error 001 and also it starts to update directly with another screen when I plugged in the usb
Thank you so much!!!
Let me know if you ever figure out a wireless option! The car has wifi so it might be possible. Glad to have at least the wired option!
Cheers mate. Believe me that wired is better. More fluid and keeps the phone charged. For wireless I got myself a dongle (30euros) and works just fine. Let me know if you want a link or so
No clue mate. Try extracting the files again, reformat the drive and try the process again. Otherwise no idea and no one here had this issues to tell us what fixed the issue
Excellent video, the whole process took less than half an hour from beginning till the end. Installation was only 7 min.
Thanks a million !!!
Glad I could help!! Enjoy your CarPlay!
Yes, if your rav4 has the same Radio model as the one in the video.
Hi. Thank you very much for your upload. I installed it, and my Android phone works with a Carlinkit but not with the cable!! It looks like it preferes, Appel. But anyway I am happy 😊. 2019 Rav4 with Navigation.
Glad that it helped mate! Mine has no navi and both Apple CarPlay and android auto work with cable only. There are few ppl here with navi that they struggled on getting it to pass the “installation failed screen” so if you can share your experience on this it will help a lot.
@costel.tarata I followed your instructions and went out to the car plugged in the USB and started the car pressed the update button and it started loading from the USB after i accepted on screen. Had to stop the engine and start it again after the update. After the installation i did like in the video opened phone menu and to the Apple/Android connection, connected Android, disconnected the usb and connected the cable from the phone, and here it's getting weird when Android auto starts it's crashes after 1 or 2 seconds. I tried 2-3 times and then i put the settings to Apple and connected my dongle, I worked right away. On my test drive i used the car navigation and there was no problem. My infosystem 17TDT1EU-CA01
No clue then. Format the drive using a macbook pc perhaps?
Thank you very much for great video that saved €€ for me👌 At Toyota service they even said that I need maps enabled for my car before they can do update which was totally wrong info as I did not have navigation enabled device.
Great to hear! Happy it helped!
Hi Everyone. I have 17TDT2EU-DA01 JBL system with Navi the car is still under warranty (2019 Corolla) so will it works on my model? I can see in the comments that model is listed but confused does anyone already tried with te sat nav? Do I loose the warranty after that modes? What to do if the system will crash how to backed up to original system then.
Thanks for the video!
Hi there. It will most likely work if the model you have is listed within the description.
Now concerning warranty, not sure what to answer. The firmware is open source from the unit manufacturer, not from Toyota and will only update the Audio Firmware and not the car software.
I did it without even thinking, my car went twice to Toyota service and they haven’t even realized I asume as they never told me anything about it.
I guess you are going to have to risk, or wait until warranty goes away.
Thank you so much for posting this and offering the advice. I have tried and failed however! Copied the files to a USB as explained. However, when I put the USB into the car, it starts to update the system automatically from what looks like a 'DOS' screen, and not through the toyota infotainment system as you have on your video. Then, all seems to load in absolutely fine. At the very end of the process, I get a red coloured 'error' message and it doesn't work.
Not sure what I did wrong pretty happy I followed all of your steps exactly.
Do I need to delete the files from the USB first which do not relate to my DCU model?
Not necessarily, but you could try mate.
Make sure to let us know!
💪
Hello friend, thank you so much for your efforts,
a question, dose this package works for Toyota corolla (pioneer) 2020 USA?
I guess you can try and see. But this is a firmware for Denso Fujitsu hardware, therefore I guess the Pioneer unit would not recognize the update file.
For those which are wondering about the 3 USB sticks: as can be seen in the video, Costel's Toyota was without nav so it needed only one USB (the 3rd one)!
My 2019 RAV4 (17TDT2EU-DA02) is with nav, so I needed all 3 USBs (links and usage order is specified in BE_00439T_TME pdf: sticks 1-2-1-3-2).
Whole retrofit upgrade procedure took 1.5h so be very patient: don't turn off or disconnect unless instructed to do so!
Original versions vs final versions:
DCU = 17TDT2EU-DA02 -> 17TDT2EU-DA30
MEU = 17TMT2EU-FA00 -> 17TMT2EU-FA10
Audio = 1000 -> 1075
Nav = 1512 -> 1120
Note: after all these, I also used a 4th USB with only 17TMT2EU-FA10_1170.kwi and 17TDT2EU-DA30_0076.kwi (17TMT2EU-FA10_latest zip and 17TDT2EU-DA30_latest zip from toyota-motor-europe) which did an additional final upgrade:
DCU = 17TDT2EU-DA30
MEU = 17TMT2EU-FA10
Audio = 1075 -> 1170
Nav = 1120 -> 1170
In the end, there is an excellent Android Auto connection: both Google Maps or Nokia/Here Maps work excellent and navigation indications are also shown on the digital speedometer (same way as the original Toyota maps did).
This is an amazing description mate.
Hope it will be useful as well to others!!!
Hi, where exaclty is BE_00439T_TME pdf ?
Thank you
glad it helped. Cheers
I have Corolla 2019 with 17TDT2EU-DA01 Software the system do not let me click on software update options. Stays blank .Any ideal ?
thank you
Have you followed the guidelines, step by step. Redo it and reformat the flash drive. Very important to be fat32 and all files to be copied. Good luck
Will this work on Uk 2019 Corolla. It’s Panasonic version the update is cheap to get from Toyota dealer but they say your maps is old you must update to latest maps then we can update to activate car play. Is this true ? The map updates are quite expensive. Thanks
hi there. I am not sure about this unit as the firmware is for the Denso/Fujitsu one. You can try and see what is the outcome, like checking if even recognizes the update from your radio settings. it might work, or not. The good thing is that it should not affect your existing configuration as this is just an AUDIO module update. Either way, do it at your one consideration and responsibility.
Good afternoon, I tried to update,
there was a version
DCU: 17TDT2EU-DA02
- MEU: 17TMT2EU-FA00
the most I got
DCU: 17TDT2EU-DA02
- MEU: 17TMT2EU-FA10
Only the MEU module was updated
Tell me how to update the DCU module?
Have you checked if the CarPlay or AA is working?
Else I cannot exactly know what happened.
See through comments if there was someone with similar specs that got it done.
Grazie per aver condiviso questo firmware. Lo provero domani avemdo io la versione 17TDT1EU-DA02. Nel video hai detto che questo aggiornamento puo' essere usato solo tramite cavo ma che in rete ci sono firmware che si possono usare anche in modalita' wireless. Sapresti dire dove poter trovare il firmware con funzionalita' wireless? Ho bisogno della chiave usb per la musiaca.
Grazie ancora .
Mate, it should work for your car. This multimedia unit you have from factory in the car will not support wireless CarPlay or android auto.
Playing music from your phone via CarPlay is actually of lossless cd quality audio, unlike bluetooth or standard mp3
Great video! I have a 2020 Corolla with only CarPlay and no android auto. I need android auto in my car. The model is: 17TDTONA-EA12 do you know what I can do to get it? Would this version also work of update with mine?
Mate, if the firmware version is listed and your car is compatible, then it should work
i have 2019 corolla hybrid - 17TDT1EU-DA01 but it doest work for me in uk
Model is compatible so I would recommend to retrace your steps into preparing the usb
Hi, is there any way to get rid of navigation before installing updates? I'm not using it anyway, and it seems like this is the only thing that could prevent me from succeeding.
No idea mate. Not sure you can do it without Toyota tech intervention.
There are some people that made it with navi as well so might have to give it a try. Fingers crossed
Done the USB as you showed but getting a 001 error with a red screen I did have to use a Mac to format the USB extracted files and move them over to the USB
Not really know what could be the issue mate. Try a different usb prepared on a different PC? In personally installed it following the same steps to many cars, including Lexus, with and without navigation enabled from factory.
Let us know if you tried again and as well the car model and unit.
Good luck
Hi all. Just thought to drop a message here and let people know. Short answer: these files currently do not work on infotainment systems with built in navigation/maps, even after updating your map version.
Context: dealer quoted ridiculous price for Android Auto update and their reasoning was that my maps needed updating. So I updated the maps from the website e-store and tried these files, still getting an error code. If you did want to try this method, hoping this can save you some money and time. Just have to wait for updated files
Oh and thanks Costel for uploading these 👍
Cheers mate, there are some chaps here that managed to get it done, even with navigation on.
Yeah sorry, I should have specified. I tried on a Corolla Hatch hybrid 2019 with these specs:
17TDT1EU-DA02
17TMT2EU-FA00
Hello. it won't let me download no matter how I try. //too many users have viewed or downloaded this file recently…. Etc
Sorry to hear about that. Try again with other browser as others have made trough apparently and the file is not restricted to anyone
Just tried this on a 2019 RAV4. UK . Did not work i got the error 001 . So i took the USB back and deleted that one file from a previous comment . It update intalls fully . But nothing has changed . No android auto available. Any ideads ?
Ive got the same car and have the same issue
Same here. Did you mange to sort this out ?
I live in Canada will the update be the same for the Toyota RAV4 2019 model in Canada also if is only for European models only.
This is For Eu models only. However I recommend downloading the correct file from Toyota.com, select your model and download from there. In Europe is not for free.
Where is the difference between the navigation / non navigation Units and what happend if it’s failed? Is my whole system then ruined?
It should not affect your system. The firmware is designed to update your audio module only. For all those that failed nothing changed apparently. Either way, you can try and see, only if you want. In the video I do it on my car without any navigation enabled. My unit has Navi, just is not enabled from factory
Do you also have NA versions of these files? I have a Toyota where the only difference in the model number is it saying NA instead of EU. Also, are these files any different than the updates you can get from the official Toyota website. My goal with this is to get Android Auto on a 2019 Toyota RAV4 that only comes with Apple CarPlay from the factory and not Android Auto. Will doing this update with your update files add the Android Auto software onto my Toyota?
Hi there mate, unfortunately not. EU spec vehicles came without option for CarPlay until 2021. The current firmware is for those models only.
Im in a similar situation, mine is NA with Apple CarPlay but I have android. Did it work for you when you tried it?
@@yemi0 you need to buy a carlinkit. Only solution I have found
Thanks
Cheers mate!!!
Has anyone tried this on a 2019 Toyota Prius?
The model is: 17tdt2eu-da01
The model appears in the list, but I understood that the update is for Corolla and RAV4 only
As long as the code on the unit is listed, it will work.
Hello.
I have the same model and the same car and when install appears in red colour error code 001
After inserting usb...installation started by itself. But after 5 minutes i got a red update failed screen. What should i do?
Mate, please follow the steps from the video. If your model is listed in description then it should work. Cannot say the same for the ones with active Navigation units. Apparently for some worked and for some not.
Has someone tested this on a 2019 Corolla Hatchback with navigation?
Hi there mate. Some tried and got it working, while some didn’t. I guess it will be trial and error.
Hallo. I'm just watched your video and I think is great, but I have one question: my model ist 17TDT1EU-CA32 do you think it will fit my car?
You can only try and see mate
There are others that make it either same specs as yours!
Salut ,am folosit si eu programul si pasi de instalat si mi-a aparut o eroare.
Am verificat daca USB ul e conectat corect .
Stii cumva ce imi cere la Error code 001?
Ai facut pas cu pas, cel mai important ai formatat stick ul cum trb, ai extras arhivele?
Hello ! Toyota Camry 2019 17TDT1EU-CA32 The radio has been updated but unfortunately the carplay option does not work. What could be the reason? 17TDT1EU-CA01 -> 17TDT1EU-CA32
Hi there,
Try with cable, nor wifi CarPlay. Also make sure that CarPlay is not restricted from your settings, alongside with Siri.
Make sure to check all these steps if the installation went successfully.
After connecting the cable to the iPhone, it activates the "IPOD" connection in the car and the connection via Bluetooth. Siri is active... I don't know what to do. During the update, there was information - Compatibility with Apple CarPlay
bug fixing@@CostelTarata
Hello.
I have a 2019 Rav4
17TDT1EU-CA02
Does the update not damage the language components?
Or does it not matter what language your system is in?
there is no damage to any of the units. its a specific update to the infotainment unit, audio module.
@@CostelTarata Thank you
I have already installed and everything is fine and works great.
I am very aware of you.
I found on the net that there is another newer update.
A RUclips link is attached
And there is a link to a new version file.
Thank you.
ruclips.net/video/PgjlgESl9ok/видео.html&ab_channel=Koval%60off
hi I got Corrola Estate 2019 Uk model. Any luck for me mate, thanks for your efforts
Check the unit model mate and if similar try updating!!
Hi, i tried this but after 15 min it's saying error( please check the contents of the usb device, error code 001, at the black screen error 0131 parameter) I tried several times the same error. My model is 17TDT2EU-DA01 part number 86140-33D01, camry Europe.
Please Any Help this the worst driving experience without the Android app.
Mate you must make sure that you followed the steps, and the files were all copied on a drive that was exFat formatted.
If all these were completed, then I really cannot help further.
Does your car have Navigation? From factory? If so, not sure if @anyone here that managed to get one done!?
Hello, I have exactly the same problem. same model and part number. have You done it?
Tried this today and didn't work, got the error 001 and red screen, what is the problem? faulty files? Car 2019 corolla hatchback Hybrid with JBL system.
Hi there mate, cannot be faulty files since there are so many ppl that successfully updated. Make sure to check your firmware version and follow the steps like in the video.
@@CostelTarata Hi tanks for reply. I watched the video several times and followed every step, is it maybe because I have the JBL system with navigation?
@@koraam2433I have the same problem and also have the JBL version
Ciao ho acquistato una rav 4 2019 con satellitare senza car play posso usare questo aggiornamento? Grazie mille
Yes, it should work if the Car audio model is listed in description.
Hi Costel,
I recently bought a 2019 Toyota Corolla UK spec. Downloaded and extracted the file using a laptop first and PC subsequently (windows OS) and then pasted onto a 32gb - fat32 format flash drive. When I plug in the flash drive, the update begins and crashes at 99percent showing an error code! Where am I going wrong? TIA.
Do the flash drive again, as long as your car model is accepted (check description in the video) and the update is confirmed (found update in the software update menu) it should work.
I fixed corollas before with and without navigation.
@@CostelTarata Thank you for your mate. My model ID matches with the one mentioned in the description (DCU: 17TDT2EU-DA01) with navigation. Do you recommend using the same flash drive that you used in the video (Sandisk 64gb)? Would MacBook make a difference? Many thanks.
@@aashishudayabhanuyou could. But using the same usb just 32GB a windows pc will allow formatting to fat32. The key is prepping the usb accordingly. No extra folders and the extracted files to go on the empty disk.
I successfully installed on both non navi and navi vehicles (both lexus and Toyota) as long as the unit model is supported
@@CostelTarata I noticed the ‘allocation unit size, underneath the format type in yours is 128kb whereas for me it’s till 64kb and no option for 128kb. That’s the only difference I could spot. Thanks for the help Costel. I shall let you know of I succeed.
my model is -17TDT1EU-CA01 but mìwith navigatore, i can install this upgrade?
hi there, well some people with navi got it working and some not. I guess might be something related with the way you fix your USB flash drive (min 32GB and Fat32 format). Follow the steps and good luck.
Hello. Is the update you are presenting compatible with my audio system ? I have version 17TDT1EU-DA02 (is on the list) with Audio version 1011. Does setting the language version matter ? My language is set to Polish. Will the Polish language settings be retained after the update ? The basic problem is that the software update button is inactive. How to activate it ? I prepared the pendrive correctly - Kingston 32GB, FAT32. Thank you in advance for any tips. Best regards.
Hi i have installed this as well and i can confirm that it has polish language. Pozdrawiam
Try redoing the steps including reformatting the flash drive. Good luck!
The update is only for the audio module, so if the car gas it from factory then it will be there after update!
cześć, czy tobie udało ?Mój tez Nie widzie usb?
Can anyone help for 17TDT1NA-CA02 does not work ANDROID AUTO. :/
You updated using this bit of firmware and enabled only carplay? Try with cable, original phone cable and check phone settings
I will try it with a DA02 Navigation on the Prius in a few week. Does anyone have already tried it?
Fingers crossed mate!
Did it work? I habe the same
Did you manage to upgrade?
Great video guide @Costel Tarata, thank you for the detailed explanation along with link to files.
I recently bought 2019 RAV4, and surprisingly the display unit is still on 17TDT2EU-DA02, despite the car is still under warranty, previous owner for some reason didn't bother to get the update done. Anyhow, as the service is due in 9 months, I am tempted to do the update myself with the provided files.
The only thing I am confused about is, there are 3 zip files:
1. Harman_Intervention_Script.zip (157 KB)
2. Full_upgrade_package_Harman_Panasonic_17MM.zip (9.6 GB)
3. Full_upgrade_package_DTEN.zip (13 GB)
I noticed that you showed the third file (13 GB) for the upgrade, is that's the only one required or do I extract the content of all the 3 files into one USB?
Please if you can clarify this.
Thank you once again.
Do not mingle with the zip file. When you download it is 13 GB but then when you unpack the archive is about 22GB.
Some people tried removing some archives and the installation didn’t work.
I recommend following the guidelines as you see, following all the steps to ensure a successful installation.
Not all the files are needed, however are there as part of the setup, and as unpackers.
Happy updating!
Sorry but I am confused about the other 2 zip files which you shared, should that be ignored?
You shared 3 zip files, but you used just one zip file content to update, so the rest of the 2 zip files what to do with them and how to update?
@@sabahmunir please follow the steps from the video, in regards to the files.
@@sabahmunir the 13 GB archive should be extracted, after unpacking will be around 22 GB. Please check the video and see how I did it and follow the same steps, without modifying/be selective with the archives or files. The video shows exactly what part of the archive to transferred to the freshly formatted USB
Costel , i have toyota rav4 2019
And the model of my screen is 17TDTEU-Ca02
Can you please help me to get the right software update ??
Hi there mate. I guess it wouldn’t hurt a try. If the model is listed means will workc if not then the USB will not verify detected whatsoever.
Let me know and fingers crossed!🤞
Still trying to get update file for 17TDT2EU-DA31. I took it to my dealer and they said no update available (only maps update) Anyone manage to find it?
Have you tried with this file? Perhaps to update the existing da31 ?
@@CostelTarata thanks for the reply, which file should I try? Edit to say I downloaded the files and can see there is a 17TDT2EU-DA31 file included. I'll try it and report back. Thanks
Thank you for the vidéo. If my car have already android auto on it will this update my firmware ? i bought the car in 2023 but it seems like its a 2020 model and i have this DCU : 17TDT1EU-DA30 without navigation option. Actuel audio version is 1240.
Thank you !
Hi there,
The Audio update will most likely change, but since you already have factory-installed Android Auto, why would you update it? this was meant for those whose cars came unfit. Unless you do not have CarPlay installed and that is your target.
@@CostelTarata thank you for your reply. I have a bug like when answering to a skype call it just hangs up directly and i thought that maybe they already fix that. i dont realy care about CarPlay i'm not an iphone user.
Does anyone have a link to software update that upgrades so you can use wireless connection with Android Auto
Only RAV4 2022 onward can use "WIRELESS CONNECTION WITH ANDROID AUTO or APPLE CARPLAY"
That’s something very rare mate, on a before 2021-2022 car. Unless aftermarket unit.
True!
Tried this and my unit is compatible but right at the end of the install it states data is corrupt and cannot install - so dissappointed looks like Ill have to pay Toyota. Also the link downloads a 12.7Gb file not 400mb like your video showed?
Mate, you must make sure that the 12.7 gb file is extracted into a fresh formatted fat32 32 gb flash drive. The final size should be around 22 GB.
The install is 400 MB but the software initiating the update and the scripts are the rest.
I recommend you try again following step by step including how to prepare the usb drive. Cheers
@CostelTarata hi really appreciate your reply, that's exactly what I did to be honest.
I've ordered a new usb stick incase that's the cause so I'll try again soon.
Well tried new usb stick and formatted correctly - goes through the update process and at the very end I get a red screen and it states couldnt complete. Checked my serial number with Toyota and it can be upgraded so unfortunately Ill have to do the expensive route of getting it done.
Shame and gutted as its obvious your system works but unfortunately just not for mine.
Thanks anyway and its a great video pal.@@CostelTarata
Has anyone ugraded with the Nav head unit please?
@anyone to help out?
Will this work on a 2021 Toyota Rav4 with only airplay and not android auto compatible?
Check the versions in the description. If yours is there, try and follow the steps
what new features does "unlock" offer for Android and are other versions of software available for different models?
There is only AA and CarPlay enabler mate.
Can i just leave the file on a laptop and plug it into the car to do the update ? i dont have a USB drive handy
the process of how USB firmware update works is not as simple as how a laptop will allow it. so it will not work
Not sure what happened to my comment but I have a 2019 Dynamic - UK Rav4.
17TDT2EU-DA01
17MT2EU-FA00
Audio 1011
Navigation 1520
navdb_version A36_4
Can you tell me if your method will allow me to get Car Play/Android Auto?
Additionally, if I don't have 32GB USB stick, is it possible to use a portable SSD? (obviously formatted in FAT32)
I would recommend sticking to USB, try with the files included. If not working leave your comment below. But the key is always the usb. No additional folders are needed as the car will not see them
@@CostelTarata Used a Fat32 - 32GB USB stick. All files and folder onto root. Turned on car engine and inserted USB. It automatically went into installation (I didn't even get to go to the Software Update menu ) so immediately this is different!
Anyhow, I leave it to install and at the end I get red screen saying Update failed. Error Code: 001.
Lucky enough I removed USB after turning car off and everything is back to normal.
Any ideas?
Yeah still doesn't work for me. The system boots up as soon as I put usb in and starts to install but at the end fails with red screen error 01
Same firmware as yours, same issues,
Thanks for the guide. I downloaded extracted and formatted the drive to FAT32 but when I plug in to the Rav4 it does nothing not even recognize the USB. Any suggestions? FYI the USB works fine with my iphone plugged in so it appears to be working ok
Did you unzip it and put the files at the root of the USB drive?
@@martinmcwhorter I did, which is why I am confused as to why it won't recognise the USB update
Make sure to properly format the drive and copy paste or extract all files on the root of the drive, do not select only your firmware version
Just tried today on DCU: 17TDT1EU-DA02 and ended with error code 001! There were some issues while copying the unzipped files. Showed same file replace options which was skipped.
As soon as the pendrive was connected, it straight away rebooted itself and started flashing the file itself, which at last showed error code:001.
Can you help me solve this?
Same issue
Guys, follow the steps in the video. Key is formatting the drive. All files should be extracted then into newly formatted drive
Have the same problem, did exactly as in the video but it just start installing (not able to click from the infotainment system to install from there) and right before finishing I get error code 1.
I'm having the same problem .
Did anyone get anywhere with this fault code ?
@@Mohammad-ms4uq @Geocherian Hi - did you get to the bottom of this? I have same issue with error code 001
Hi There, i just purchased a preowned Rav4. The model ID on my Head Unit is 17TDTZA-CA01. what i want to know is would this update be compatible for South Africa?
Hi there,
In all honesty it was proven to work only for European models with no Active navigation. Some people made it work even there.
Whether it will or not work on your car, you could try and see. Nothing bad will happen happen to the car either way.
Do it and let us know, for the others from South Africa to know.
Did you ever get around to trying this update? I have the same model head unit.
@@meta-verse unfortunatelly no, but you could try following the steps and see if the unit will recognize the update or not.
@@CostelTarata tried it. It said update is not compatible. If you happen to find the update for 17TDTZA-CA01, please update us. I’ve been searching everywhere online and no luck. My dealer here in Trinidad are no help whatsoever
I'm crap with these things. I'm using a zip extractor so I can download the file using Windows 10.
Then I drag it to the 32g USB.
Then I stuck it in the car USB port.
Does that sound right?
Hi there mate!
Not sure exactly what or how you did it. Make sure to follow the exact steps I did in the video.
The file must be all copied, not only specific files. The USB must be Formatted as well in Fat32 mode.
@@CostelTarata thanks I'm in the process of doing it. I'll let you know if I get it to work
@@CostelTarata hi again. I'm making a balls of this.
I see on your video the file is only 400mb.
But the file i linked on to is 13gb. Is that correct?
@@barkendog1mate, the whole file system is 22 GB almost. What updates my car is 399 MB. That doesn’t necessarily means that you should skim the file. Please follow the steps I did, and everyone else did. Before doing all this, make sure your car infotainment unit is listed in description.
@@CostelTarata thanks. I'm still at it. Fingers crossed
Hi @costel - I live in south africa, model number 17TDT1ZA-CA01 - Do you have the firmware for that available or do you think I can use EU Firmware
Hi there, try and see what is coming out of it. At worst there will be no firmware update found.
Hi @reapaish3093
Could you update your system in South Africa as I also want to try it?
@@vianpieterse9407 Have not tried it yet
Salut! merge si pe toyota camry 2020 17tdt2eu-da01? Procesul e la fel cu ce ai facut tu sau am nevoie de usb 1+2 ? (Asa am citit prin comentarii)
Mc mult , astept rsp tau sa incep update!
@@Legokidsplay salut! Am instalat pe Yaris, Yaris Cross și Corolla. Teoretic, ar trebui să meargă. Dacă nu merge, trebuie să faci rost și de celelalte două USB-uri, pe care momentan nu le am, căci nu am avut nevoie. Încearcă și, dacă nu merge, nu o să strice nimic.”
Am încercat.. nu merge , da eroare la sfârșit.. mc mult de tot de info !
Flash drive formated and loaded with what ? Sorry but, i could not understand that part
Check the video for instructions mate. Everyone got it apparently
I tried on my friends RAV4 model ID: 17TDT2EU-DA01. Update gone well. Updated the audio to 1020 from 1000. But no CarPlay coming. Tried 2 times. But every time no manual update possible. It's detecting usb and installing starts automatically. Pls help
Sorry to hear about that buddy. Is your car info unit listed in description?
If so then I would recommend retracing the steps and redu the USB, with the hope that this will work.
Let us know the model of car you have.
Model is 17TDT2EU-DA01
This is happening with me. Do you have one solution?
@@lucascasimiro8555 unfortunately not yet
Hi.. I did like u said.. put all the files in the root folder of fat 32.. the car booted into red error screen and it says that "panasonic up has failed.. Installation has failed.
Dcu error 0081 parameter 0.
Dcu programing mode.
How can i exit this programing mode?
I cant use the screen at all..
The update should only be found manually and not automatically. The firmware is for the audio unit only, so at worst, if something goes wrong (which shouldn't), only your audio module should be affected. I have personally done this on at least 50 cars without issues, both with and without navigation.
Please ensure you prepare the flash drive correctly. Format it using FAT32. If you have already tried with Windows, use a MacBook instead. Then, copy the files into the flash drive's root folder as shown in my video.
If your car unit is not working at all, it is not due to the firmware, as the update is only for the audio part of the unit.
Try again and let me know.
I tried with a new flash drive and since i dont have a screen (red screen) i hoped that tge update will start when u start the car.. But tge screen is steel red screen.. I have no radio, bluetooth, rear camera..
I dont know how to exit this error red screen.. Dcu programing mode.
I tried to enter service mode with the 3 times head lights on and off with audio button pushed.. But that not working as well.. i think there is a reset button there.
Hi guys- I’ve got the same issue with the fail and red screen at the end. Doesn’t seem to affect the software after I restart the car. However I can’t stop the car from automatically starting the update rather than going through the menus and only selecting the audio to update. I’ve followed the rest of the guide , memory stick formatted to fat32 and have taken only the root folders. Any tips? Thanks
Will it work on 2020 RX 350 Lexus FWD NAP as well?
Supposedly yes, if the infotainment unit model are listed in the signature. Also have in mind that some ppl could not install it on units that have navigation enabled.
Either way, follow the steps and see whats the outcome.
Unfortunately I tried and it doesn't work with my Australian model 17TDT1OC-CA01. Are you working on support to the oceanic regions? Would be great. Happy to pay for your work as Toyota wants to charge $200 for the update
Im afraid i cannot help mate. Perhaps renaming the file could work (whatever has EU in the name put OC (after unpacking to your USB.
In theory should work.
Ok I'll give that a try
@romancherfan9962 Did you manage to get it working mate? Im in Oz trying to find an update.
I still haven't got around to trying the name change
Would this work on an alphard 2019 December make?
If ia the same infotainment unit, then yes.
Will this work on a North American Toyota? Will it mess anything up if it doesnt work? My car does not have Android Auto.
You have CarPlay but no AA?
No clue mate i guess you can do trial and error. No idea if it will mess with anything in all honesty but i guess if you do toyota dealership can revert it to factory
Im only guessing.
@@CostelTarata i tried on my NA Toyota 2019 RAV4. It did not find any software updates at all when I inserted the USB.