Every time I think about attempting to install one of these myself I just look at videos like this and discover just how much electrical knowledge you need to possess to get the steering wheel controls to work.
for everyone having trouble with the key 1 and key 2 wires, apparently you're supposed to attach one of the Honda's steering wheel control wires to ground and the other one to key1 (or key2). Key 2 is just for in case you have a lot of steering wheel buttons. I'm installing it tomorrow to verify if this is true.
Hi man, so as I understand that key 1 or 2 have to go to input and we take ground from black cable(ground cable) from main harness. But for example if my car has 2 group of steering wheel control buttons like 3 each side. Should I both key 1 and key 2 connect to input?
@@danh9676 yep, if I recall correctly, I connected key1 to the positive input and just grounded the other one. The unit measures resistance and all you need for that is the single wire but grounded
@@sevkibicen8377 well that entirely depends on your car. You just gave me a hypothetical scenario. Does ur car really have 2 cables? If so then connect one of the + cables to key1, the other to key2, and ground the negative one. That's how it worked for me with my single wire.
I’m a 10 year old gear head I love these vids I want a oddysey myself a 2005 to be exact, I want to do this I love learning how to do this for when I get my license❤
Hello dial 2, i agree with reedrancho. It is ineed a pleasure to have someone willing to be so percise with his work and a good clear voice and pronounceate your words clearly. I will be returning to these vids as i haven't chose my stereo yet. with much gratitude your fan.
This is very helpful, thank you so much. I am installing a different radio than the one you installed here on my 2008 Honda Odyssey. The radio came with 2 steering wheel wires labled as SW1 and SW2. In your video, you showed that the your brown is connected to key 1 (ground) and key 2 wires on your harness. I was wondering if my SW1 is equivalent as your key 1 ground, and my SW2 is your key 2 wire? Thanks for your input. :-)
Hi Alexander, How do you input the code if the battery is ever disconnected now which shuts off the radio and I think a few other things that we have to input to get them working again?
Very informative video, thank you so much. I just bought some of the accessories through your affiliate link and will come back and use it when I decide which radio I want. Thanks again for the video, it's well made 👍
Very helpful video, just a quick questions, I have only one wire (key1) from my android auto, should I connect it to wire number 6 or 7? Also did you connect that 20 pins harness to somewhere or not? If yes where did you connect that harness? I don’t have options for that harness in my adroid system. Thank you in advance
Great demo! Looks like a nice unit 👍 However why wouldn't they make the opening big enough for their screen ? That's odd And the wiring is odd also they give you two wire plugs that you have to put together why not just have it factory wired together and the customer could just cut the wires that weren't needed ? Again great detail 👍
The Scosche plastic bezel is actually a proper double DIN size that would fit all the Sony, Pioneer, JVC stereo, but the China brand Android unit with the 7" screen is bigger than the standard opening. As for the wiring, that's very normal for any aftermarket car stereo. There is one harness that plugs to the aftermarket radio, then it's the customer's responsibility to figure how they will wire it to the factory wiring. In this video, I show you how to 'easily' wire everything up by buying a wiring harness that plugs directly to the factory plug. You will notice with the way this was installed, no factory wires were cut. The factory stereo can be reinstalled at anytime if you want. Hope the info helps. Thanks!
dial2fast oh ok got ya that does help thank you 👍 I just figured if they were supplying the wiring harness it would be easier to just cut the wires not needed then have to soldier each one And yes it's very nice that you don't have to cut into the factory harness this way you can put the old system back in for resale Thanks for taking the time to reply I appreciate it
Thank you for this. I was afraid of having to buy an interface device for my steering wheel controls, but I Googled it and found a full installation video with my exact car. Thank you very much.
you sir are truly helpful.... i been searching for these wires for my 2011 honda fit.. ill be sure to see if i can now connecct my swc for my new atoto a6pf headunit.... by chance uk which wires are for the reverse camera???
My ody comes with nav but has been burning out with a little puff of smoke coming from the upper left corner. This video will be helpful for replacing it.
The third wire is the ground, you can find it using the multimeter with the wire from switch 1 or switch 2, so if the steering wheel control has 3 wires, two circuits for the buttons and one ground for the two wires.
Hello, this looks awesome and I will attempt to get this done. My question is my 2006 oddesey has dvd system in the back for the kids, how and is it that going to get affected? How would I have control of dvd input in the back? Thank you.
@@dial2fast do you know would they be able to control it from the back, and how would that work? DVD is very important to us, since we go on a longer trips and kids love to watch the movies. Thank you.
I purchased a Ankeway android radio from Amazon and not sure what type of direct wire harness to get to install in my 2009 honda odyssey. It has steering wheel radio control, no navigation from factory,rear video entertainment system. Hope you can give me some guidance in a video of possible. Thank you for you time Tito
You can often find the radio code on a sticker on the outside of the glove box. Or honda will give it to you just have the vin. Same with navi. As for the harness Id save the $10 and chop it up. When I sell a car its ready for the crusher.
Hey I'm watching this video it's looks very easy but one question I have a 2009 Honda Odyssey I got navigating touch screen want to upgrade to the after market do I need all the wires you using???
Does your 08 Honda Odyssey came with HFL? (handsfree link), I tried following your guide with my 2011 honda cr-z ex no nav. It worked out great, thanks. The only thing I couldn't get to work was the steering wheel controls, I found the 2 wires (one for ground and one that detects voltage for audio remote switch) I need from my harness but after wiring it the same way as you did it still didn't work.
My Ody does not have handsfree, but for the steering wheel control, you should check with a multimeter to see if each button press will have a different resistance on those two wire from the factory harness. There is no voltage coming from the two factory wires (when not connected to the stereo). The aftermarket stereo will detect the voltage drop of each button press and saves it in its memory.
dial2fast yes, I checked it with a multimeter like what you did and and it does recognize the resistance change when any of the buttons are pressed. unlike your HU, mine only has 2 wires for steering wheel controls ( SW-Key 1 and 2, no SW-Key Ground). I grounded one of the wire for the SWC and connected the wire that detects the button press to SW-Key 2 (also tried it in SW-Key 1) but it's still not detected on the Head Unit, I wonder if mine is just defective or am I going to need one of those universal SWC adapter (like the Axxess ASWC-1) Edit: NVM, i re checked all my connections and I finally figured out what's wrong, one of the SWC wires that neess to be grounded was not properly wired. Now its it's working. Thanks again
If you don't have SW-Key ground, try connect one of the factory SWC wire to either the SW-Key1 or SW-Key2. Then connect the second factory SWC wire to stereo ground wire. AFAIK, SW-Key1 and SW-Key2 are both used for SWC signal and should not connect direct to ground.
In which case should we connect both key 1 and key 2 to OEM swc wire? Or how do we understand that which one (key 1 or 2) should use to connect to OEM swc input?
Does your unit do a full android boot up every time you put the key in? I expected it to wake from sleep immediately but mine does a full boot sequence every time. I have confirmed on my unit that B+ has battery voltage and ACC comes from key accessory power. I'm not sure why it keeps rebooting rather than sleeping.
I have a 2010 EX-L with a Jensen VX7022, I don't have the steering wheel controls hooked up with the headunit, I just have to splice into the two wires you showed? I don't need the steering wheel control module?
The wiring should be the same for your 2010 Odyssey. The only thing you need to check is if your Jensen unit has support for steering wheel control without the need for a third party box. I know most Android head unit has this support built in.
I took a look at that Jensen guide and indeed it shows SWC (A/B/gnd) similar to the Android unit. But the guide also mentions recommending to use the PAC SWI-RC device but the PAC install guide shows connecting to the aftermarket radio via 3.5mm phono jack....which I don't see the Jensen unit having in the wiring diagram. Guess if the Jensen UI has a menu to map buttons like the Android, you can always try to wire it up and see if it works (without the PAC device).
Download a Honda logo Image. And upload it to your radio via USB. If your using android radio especially setup wifi Google it download etc. And it should be an app on the radio to allow you to change the boot up screen.
I just finish installing after market radio on my Odyssey 2008 , getting no radio signals, could it be the antenna that came with the hardness kit. Can you please help .
Yes you leave the middle two connectors unplugged, except for adding steering wheel control. For steering wheel control, connect a positive KEY wire to PIN 6 or 7 wire (see video at 9:20). Then you ground the other wire that is in PIN 6/7, the one you didn't connect to KEY. If you have a KEY Ground wire on your new harness you use that to ground the 6/7 wire. If you don't have a KEY ground wire then add a wire connecting your black GROUND wire to the non-keyed PIN 6/7 wire. Here are some useful diagrams for various connectors, showing where the steering wheel control wires are. www.universalfuze.com/techdata
I ran into a similar situation. Wired everything else on that harness but my Nakamichi Android Unit offers steering wheel controls. So I have 1 Orange wire labelled "key", 2nd Solid Blue wire labelled " SWC2" and 3rd solid Brown wire labelled "Back CTRL". I'm thinking of soldering "key" to Pin #6 and "SWC2" to Pin #7. Not sure what to do with the Brown "Back CTRL" wire though. Any help would be greatly appreciated.
Dear Sir, watched both your video. Looking at your video, I also bought C500 MT3562 Ownice car media system for my Mercedes C200 2004 model, but Nothing seems to be working in that. Mainly I have not succeeded in getting right connection in wire connection could you please help me.
@@Migue_litio Without original main unit, there is no way to use the original DVD with any android stereo cause it communicates thru digital signal not analog like RCA and also it needs control signal such as play, pause and next etc. Technically it is possible to encode and decode the digital signal and control signal but no commercial product is available.
Hi there, so I just installed an android head unit to my car but the steering wheel control is not working even tho I followed your instructions. Any ideas? Thanks
Hi thanks for your vídeo. I tried to connect like you said in pin 6 and pin 7 but the steering wheel controls it didnt work. Can you help me please? I connect key 1 wich is the Brown cable to the brown cable in pin 6 and key 2 wich is an Orange cable to the pink cable in pin 7 i think there is something i didnt right i hope you can help me
Thanks for the great video! Our EX-L has the OEM ceiling mounted flip down DVD player. Would it be possible to output the video from the android to that?
You'll have to find a head unit with RCA video output, and do some trickery with the control circtuitry to get the rear video to turn on. Do a search for "dccharacter honda odyssey" for more information.
Dear friend , I have Honda 07 pilot with DVD entertainment connected, if I upgrade my player, where I have connected the GA-NET connector (14P) and the External Device connector (20P) ?
Looking to update 2010 Odyssey EXL without navigation. Want to include remote start, steering controls, apps from internet like siriusxm, prime, hulu and others. Back up cam on radio but also allows playing while driving. The EXL has a different setup than Odyssey with navigation. We have a flip down tv in the back maybe two I have 5 miles in it since I bought it. Has small reverse cam in mirror which sucks. It seems to have an issue playing DVDs and sound separate from music. Want to re wire it to play apps on back tvs and plug in wired headphones so we only hear kids enjoying their shows.
I haven't had time to film an update, but I have been using it daily since making this video, and it has had no issues. Always turn on and start the audio with starting the car. All functions work well. Sound quality is good. If I need internet connection to unit, I tether my mobile phone to the unit and run Waze for GPS. Play all my music using a USB stick. No issue with Android and runs fine.
Wow. Thanks for the quick response. I have the same car and plan to follow your installation. Great video. Also, do you ever plan on installing the dash cam that came with the unit?
Hi Help my place, I have Honda Odyssey 08, 2Din JVC 6.8 screen, I don't understand which wire to connect the music steering wheel controls, I have only 2 wires in JVC
Every time I think about attempting to install one of these myself I just look at videos like this and discover just how much electrical knowledge you need to possess to get the steering wheel controls to work.
none if you just look up a diagram. he was showing off.
Agree with Michael. Just follow the diagram. You can do it!!
@@NoraTTang literally my 5yr old can do it’s not hard at all if you can read...
@@NoraTTang It's not that easy. The instructions & diagram written by those Chinese are horrible. The guy did a great job showing you how to.
for everyone having trouble with the key 1 and key 2 wires, apparently you're supposed to attach one of the Honda's steering wheel control wires to ground and the other one to key1 (or key2). Key 2 is just for in case you have a lot of steering wheel buttons. I'm installing it tomorrow to verify if this is true.
Hi man, so as I understand that key 1 or 2 have to go to input and we take ground from black cable(ground cable) from main harness. But for example if my car has 2 group of steering wheel control buttons like 3 each side. Should I both key 1 and key 2 connect to input?
Did you verify?
@@danh9676 yep, if I recall correctly, I connected key1 to the positive input and just grounded the other one. The unit measures resistance and all you need for that is the single wire but grounded
@@sevkibicen8377 well that entirely depends on your car. You just gave me a hypothetical scenario. Does ur car really have 2 cables? If so then connect one of the + cables to key1, the other to key2, and ground the negative one. That's how it worked for me with my single wire.
@@xtremedestroyer9241 How did you ground key2? Sorry, wiring newb here.
I’m a 10 year old gear head I love these vids I want a oddysey myself a 2005 to be exact, I want to do this I love learning how to do this for when I get my license❤
Hello dial 2, i agree with reedrancho. It is ineed a pleasure to have someone willing to be so percise with his work and a good clear voice and pronounceate your words clearly. I will be returning to these vids as i haven't chose my stereo yet. with much gratitude your fan.
Cool, thanks for your wonderful comment!
Helps me alot. But would you please give a video on wire layout from rear door camera to front passenger site?
This is very helpful, thank you so much. I am installing a different radio than the one you installed here on my 2008 Honda Odyssey. The radio came with 2 steering wheel wires labled as SW1 and SW2. In your video, you showed that the your brown is connected to key 1 (ground) and key 2 wires on your harness. I was wondering if my SW1 is equivalent as your key 1 ground, and my SW2 is your key 2 wire? Thanks for your input. :-)
Hi Alexander, How do you input the code if the battery is ever disconnected now which shuts off the radio and I think a few other things that we have to input to get them working again?
Very informative video, thank you so much. I just bought some of the accessories through your affiliate link and will come back and use it when I decide which radio I want. Thanks again for the video, it's well made 👍
Very helpful video. Thanks for taking the time to document the process 👍🏻
Very nice teacher of stereo installation. Was very thorough and knowledgeable.
Very helpful video, just a quick questions, I have only one wire (key1) from my android auto, should I connect it to wire number 6 or 7?
Also did you connect that 20 pins harness to somewhere or not? If yes where did you connect that harness? I don’t have options for that harness in my adroid system. Thank you in advance
Nicely Done. It is a pleasure to watch you skill as a videographer and your clear concise explanation of what is happing 👍👍👍👍
Thank you so much for your comment!!
Great demo! Looks like a nice unit 👍
However why wouldn't they make the opening big enough for their screen ? That's odd
And the wiring is odd also they give you two wire plugs that you have to put together why not just have it factory wired together and the customer could just cut the wires that weren't needed ? Again great detail 👍
The Scosche plastic bezel is actually a proper double DIN size that would fit all the Sony, Pioneer, JVC stereo, but the China brand Android unit with the 7" screen is bigger than the standard opening. As for the wiring, that's very normal for any aftermarket car stereo. There is one harness that plugs to the aftermarket radio, then it's the customer's responsibility to figure how they will wire it to the factory wiring. In this video, I show you how to 'easily' wire everything up by buying a wiring harness that plugs directly to the factory plug. You will notice with the way this was installed, no factory wires were cut. The factory stereo can be reinstalled at anytime if you want. Hope the info helps. Thanks!
dial2fast oh ok got ya that does help thank you 👍
I just figured if they were supplying the wiring harness it would be easier to just cut the wires not needed then have to soldier each one
And yes it's very nice that you don't have to cut into the factory harness this way you can put the old system back in for resale
Thanks for taking the time to reply I appreciate it
Needed those steering wheel control outputs. Thank you.
Thank you for this. I was afraid of having to buy an interface device for my steering wheel controls, but I Googled it and found a full installation video with my exact car.
Thank you very much.
I'm trying to figure out the right wire to connect DVD player to the android stereo, so it can display on the roof monitor.
If you got it let me
Know please
I see other guy he did that but didn’t show how
Please let us know how….
Thank you. Your video helped me find the steering wheel signals when I was installing the Maestro Rr on my 2010 Honda Odyssey.
you sir are truly helpful.... i been searching for these wires for my 2011 honda fit.. ill be sure to see if i can now connecct my swc for my new atoto a6pf headunit.... by chance uk which wires are for the reverse camera???
Thanks for posting this great video. I am getting ready to install a new Android Head Unit in my wife's Odyssey and this information is invaluable :)
Hello I just finished watching your video can I use the wire harness from this video for my 2005 Honda Odyssey
Pretty cool. Did it have backup cam. Connection?
Bro thanks! You literally did all the homework and shared it. Pretty nice of you to hook up other DIY dad's, LOL!
Glad you found my video to be helpful. Cheers!
My ody comes with nav but has been burning out with a little puff of smoke coming from the upper left corner. This video will be helpful for replacing it.
My android car have 2 wire (brown and pink color, also called key1 & key2)
What color to connect to ground ?
Thanks for advice
The third wire is the ground, you can find it using the multimeter with the wire from switch 1 or switch 2, so if the steering wheel control has 3 wires, two circuits for the buttons and one ground for the two wires.
Thank you so much.
How do I go about connecting it with RES?
It does not integrate with RES.
How to connect the rear camera and steering control?
Already liked the video before I started to watch
Thanks MrRanger!!
I want to ask you parking brake and brake in is the same,Thank you!
Thank you so much. Your video was very helpful
So key 1 is a out put ground? And key2 is the receiver from the steering ?
Can this head unit be programed to one of the steering wheel buttons to answer/hangup phone call ??
Hello, this looks awesome and I will attempt to get this done. My question is my 2006 oddesey has dvd system in the back for the kids, how and is it that going to get affected? How would I have control of dvd input in the back?
Thank you.
If you install this aftermarket radio, you will lose the control of the rear DVD.
@@dial2fast do you know would they be able to control it from the back, and how would that work? DVD is very important to us, since we go on a longer trips and kids love to watch the movies.
Thank you.
@@krulj25 You will lose all the rear entertainment function because all the control is from the front factory head unit.
What caused it to show the Honda logo at startup?
When watching RUclips on that stereo do you need to stream your phone or the stereo has to have its own reception?
Do the map apps on this unit work without data or WiFi connection?
I purchased a Ankeway android radio from Amazon and not sure what type of direct wire harness to get to install in my 2009 honda odyssey. It has steering wheel radio control, no navigation from factory,rear video entertainment system. Hope you can give me some guidance in a video of possible.
Thank you for you time
Tito
Hey there, did you just splice the key 1 and key 2 wires into the brown and light brown wires?
I have a Honda Odyssey 2010 ex with the factory dvd how can I connect it to this radio?
I have an 07, same question can I hook up the DVD player to this head unit?
You can often find the radio code on a sticker on the outside of the glove box. Or honda will give it to you just have the vin. Same with navi.
As for the harness Id save the $10 and chop it up.
When I sell a car its ready for the crusher.
Is there any wiring harness from Metra or any others available to connect key 1 or 2 than soldering it?
Hey I'm watching this video it's looks very easy but one question I have a 2009 Honda Odyssey I got navigating touch screen want to upgrade to the after market do I need all the wires you using???
were you able to do in your odyssey with navigation? could you share the resources please? thanks!
I can used this in my Honda Odyssey 2006??
Does it matter what colour goes to pin 6 or 7?
Is this the same steps for the navi equipped version?
Does your 08 Honda Odyssey came with HFL? (handsfree link), I tried following your guide with my 2011 honda cr-z ex no nav. It worked out great, thanks. The only thing I couldn't get to work was the steering wheel controls, I found the 2 wires (one for ground and one that detects voltage for audio remote switch) I need from my harness but after wiring it the same way as you did it still didn't work.
My Ody does not have handsfree, but for the steering wheel control, you should check with a multimeter to see if each button press will have a different resistance on those two wire from the factory harness. There is no voltage coming from the two factory wires (when not connected to the stereo). The aftermarket stereo will detect the voltage drop of each button press and saves it in its memory.
dial2fast yes, I checked it with a multimeter like what you did and and it does recognize the resistance change when any of the buttons are pressed. unlike your HU, mine only has 2 wires for steering wheel controls ( SW-Key 1 and 2, no SW-Key Ground). I grounded one of the wire for the SWC and connected the wire that detects the button press to SW-Key 2 (also tried it in SW-Key 1) but it's still not detected on the Head Unit, I wonder if mine is just defective or am I going to need one of those universal SWC adapter (like the Axxess ASWC-1)
Edit: NVM, i re checked all my connections and I finally figured out what's wrong, one of the SWC wires that neess to be grounded was not properly wired. Now its it's working. Thanks again
If you don't have SW-Key ground, try connect one of the factory SWC wire to either the SW-Key1 or SW-Key2. Then connect the second factory SWC wire to stereo ground wire. AFAIK, SW-Key1 and SW-Key2 are both used for SWC signal and should not connect direct to ground.
@@dial2fast Thanks so much. after 12hrs of my head unot changing works without resting, your comment is the solution that save my life.
In which case should we connect both key 1 and key 2 to OEM swc wire? Or how do we understand that which one (key 1 or 2) should use to connect to OEM swc input?
What is the legend where you plug the key 1 and key 2 on your harness?
Does your unit do a full android boot up every time you put the key in?
I expected it to wake from sleep immediately but mine does a full boot sequence every time.
I have confirmed on my unit that B+ has battery voltage and ACC comes from key accessory power.
I'm not sure why it keeps rebooting rather than sleeping.
hello friend, a question to find the cables of controls to the steering wheel in which scale you put the ohms I have a Honda CRV 2014, thank you.
I have the 2009 model with navigation from factory would this set up work for me or do I need a extra harness
Hello I have a Honda Odyssey Touring 2010 I want to install the same sound equipment you have in the video.
I have a 2010 EX-L with a Jensen VX7022, I don't have the steering wheel controls hooked up with the headunit, I just have to splice into the two wires you showed? I don't need the steering wheel control module?
The wiring should be the same for your 2010 Odyssey. The only thing you need to check is if your Jensen unit has support for steering wheel control without the need for a third party box. I know most Android head unit has this support built in.
It looks like it has three wires for the SWC, the manual says you need a third party box. www.jensenmobile.com/docs/common/VX7022/VX7022_IM.pdf
I took a look at that Jensen guide and indeed it shows SWC (A/B/gnd) similar to the Android unit. But the guide also mentions recommending to use the PAC SWI-RC device but the PAC install guide shows connecting to the aftermarket radio via 3.5mm phono jack....which I don't see the Jensen unit having in the wiring diagram. Guess if the Jensen UI has a menu to map buttons like the Android, you can always try to wire it up and see if it works (without the PAC device).
it does have a dedicated app for the SWC. I'm going to try it out.
Everything you do look very easy !! Thanks you for your videos. !!!
can you tell me what the series of the stereo is I have a 2006 Honda Odyssey to order the screen and the plastic to put it on the van please
Daniel ur right. does not show u how to locate those wires fro steering wheel control.
what i wanna know is how you got that aftermarket head unit to boot up with the honda logo. i want it.
Download a Honda logo Image. And upload it to your radio via USB. If your using android radio especially setup wifi Google it download etc. And it should be an app on the radio to allow you to change the boot up screen.
Is it possible to do this on a 2007 Honda Odyssey with the built in navigation
I have a 2005 Honda Odyssey EX. I want to do this. Will it work?
I just finish installing after market radio on my Odyssey 2008 , getting no radio signals, could it be the antenna that came with the hardness kit. Can you please help .
What kind of android stereo is it ? Do you can give me the serial? Can I connect a backup camera with those stereo??
My factory stereo has 4 connectors like yours. Did you leave the middle 2 connectors unplugged?
Looks like a 20 pin connector and a 13 pin connector.
Yes you leave the middle two connectors unplugged, except for adding steering wheel control.
For steering wheel control, connect a positive KEY wire to PIN 6 or 7 wire (see video at 9:20). Then you ground the other wire that is in PIN 6/7, the one you didn't connect to KEY. If you have a KEY Ground wire on your new harness you use that to ground the 6/7 wire. If you don't have a KEY ground wire then add a wire connecting your black GROUND wire to the non-keyed PIN 6/7 wire.
Here are some useful diagrams for various connectors, showing where the steering wheel control wires are. www.universalfuze.com/techdata
I ran into a similar situation. Wired everything else on that harness but my Nakamichi Android Unit offers steering wheel controls.
So I have 1 Orange wire labelled "key", 2nd Solid Blue wire labelled " SWC2" and 3rd solid Brown wire labelled "Back CTRL". I'm thinking of soldering "key" to Pin #6 and "SWC2" to Pin #7. Not sure what to do with the Brown "Back CTRL" wire though. Any help would be greatly appreciated.
Dear Sir, watched both your video. Looking at your video, I also bought C500 MT3562 Ownice car media system for my Mercedes C200 2004 model, but Nothing seems to be working in that. Mainly I have not succeeded in getting right connection in wire connection could you please help me.
Will this work with my oem dvd player installed
I have a 2006 Honda Odyssey touring to change the head unit and for everything to work all I need is this ? I have a DVD player too
Same question, did you find the way to conect the dvd?
@@Migue_litio Without original main unit, there is no way to use the original DVD with any android stereo cause it communicates thru digital signal not analog like RCA and also it needs control signal such as play, pause and next etc.
Technically it is possible to encode and decode the digital signal and control signal but no commercial product is available.
Hi my radio has just 2 wires key1 and key 2 I want to install it on 2008 Honda Odyssey where should I contact .no ground wire . Thanks
Does it fit in 2007 as well?
Hi there, so I just installed an android head unit to my car but the steering wheel control is not working even tho I followed your instructions. Any ideas? Thanks
Thanks so much if i can I will give 100 likes to this guy 👌👌👌👌👍👍👐
does this work with the 2009 oddesy lx stock radio?
Did u measure with multimeter on acc or when the car key is out
acc
Hey is there a way to install a wireless parking camera and to send its signal wireless via bluetooth to an android tablet ?
Bug hole
Hi thanks for your vídeo. I tried to connect like you said in pin 6 and pin 7 but the steering wheel controls it didnt work. Can you help me please? I connect key 1 wich is the Brown cable to the brown cable in pin 6 and key 2 wich is an Orange cable to the pink cable in pin 7 i think there is something i didnt right i hope you can help me
I have a radio but only has 1 key wire no ground so I would connect to pin 7 ?
Thanks for the great video! Our EX-L has the OEM ceiling mounted flip down DVD player. Would it be possible to output the video from the android to that?
You'll have to find a head unit with RCA video output, and do some trickery with the control circtuitry to get the rear video to turn on. Do a search for "dccharacter honda odyssey" for more information.
Hi master dial2fast, I is posible to solve this problem on hondas who have an original navigation system ?
Excellent video
I have a 2005 Honda Odyssey. Matched up all the colors, double din works but no sound is coming out. Please help
What about the 2007 Honda Odyssey
Dear friend , I have Honda 07 pilot with DVD entertainment connected, if I upgrade my player, where I have connected the GA-NET connector (14P) and the External Device connector (20P) ?
Hi there just like to ask where did you connect key1?
You can use key1 or key2. I did not connect key1.
what the color of Speaker Cable in Headunit Odyssey 2001
hi thanks for the vid. is it connect with the rear system if not how can i do that
No
Instead of soldering it can I crimp them ?
Yes you can crimp.
Looking to update 2010 Odyssey EXL without navigation. Want to include remote start, steering controls, apps from internet like siriusxm, prime, hulu and others. Back up cam on radio but also allows playing while driving.
The EXL has a different setup than Odyssey with navigation. We have a flip down tv in the back maybe two I have 5 miles in it since I bought it. Has small reverse cam in mirror which sucks. It seems to have an issue playing DVDs and sound separate from music. Want to re wire it to play apps on back tvs and plug in wired headphones so we only hear kids enjoying their shows.
Any update with this unit? I added it to my cart and am about to buy.
I haven't had time to film an update, but I have been using it daily since making this video, and it has had no issues. Always turn on and start the audio with starting the car. All functions work well. Sound quality is good. If I need internet connection to unit, I tether my mobile phone to the unit and run Waze for GPS. Play all my music using a USB stick. No issue with Android and runs fine.
Wow. Thanks for the quick response. I have the same car and plan to follow your installation. Great video.
Also, do you ever plan on installing the dash cam that came with the unit?
Can i do this on my civic 2007?
Can you replace the radio on a Odyssey with rear entertainment system and make the rear entertainment system work without the original radio?
No
Can I get the names of the whole product for my Honda pls
I did turn the ignition while passenger SRS unplug. Please help to fix this problem. Thanks in advance.
Hello, what is the screen measurement
So it doesn't matter which android head unit they all work same as far as steering wheel controls
Hi Help my place, I have Honda Odyssey 08, 2Din JVC 6.8 screen, I don't understand which wire to connect the music steering wheel controls, I have only 2 wires in JVC
at 8:16 find Steering Wheel Control wire pinouts in harness: thanks!
Will that dvd still work with the radio ?
Not the factory dvd player.
How to install hipoz android 7.1 in 2007 honda odyessy starting control
Does this work for a Honda odyssey 2006
will this set up work on 2006 ?
Question for you?
What do you mean by US or CDN?
United States shoppers, and Canadian shoppers
This won't work on 2007 Touring?
Where did you connect the ground wire?
I think in the pin ground (number 5 of diagram).
Can I do my 08 Ridgeline ,I have hard time to finding right part to connect to wheel remote
Mostly same as this and you can use this wiring harness (www.ebay.com/itm/264964909568) unless you have a premium sound system (subwoofer)
does the factory dvd player still work with this
No