I was sad when I saw the warming today. I tried what you said. Just touched the sensor and closed it back and it worked!!!!!!!!! Thanks for sharing your knowledge.
I had this error message on my MB and also noticed my car battery needed replacing! After replacing the battery turns out the sensor was fine all along! Good thing I didn't rush into fixing the problem !
I had a feeling i was going to see this in the comments thats definitely what im going to try tomorrow hopefully it fixes, mine is saying to leave it in park and let the battery charge
The sensor actually comes off by sliding the 2 little tags at the bottom corners It leaves the mounting plate stuck to the windscreen but really good vid as always
Keith. Thank you so, so much for this video. I went on a long trip and my GL battery died, I charged while connected and fucked up all the electronics. This message was popping. So I did what you showed in your video, and by just disconnecting and reconnecting it back again, it started working and cleared the fault. Also the radio got fucked up, the steering wheel controls were not working, the radio wouldn't turn off when you turn off the car, a mess, so I did the same thing with the battery and everything started working again.
If you must remove the sensor, you could also use dental floss!!! Yes, wrap the dental floss around your fingers and gently CUT the the adhisive between the glass and the sensor. Real simple, no scratches of the glass or the sensor.
My auto headlights no longer work nor does my rain sensor. I accidentally destroyed the wires. Is there a way I can order a new wire. I also need a new rear view mirror as those wires are destroyed as well.
I have a 2007 sl550.Wipers sporadically turn on, may run a couple of times, or run every 5 to 10 seconds. If I replace the sensor does it need to be recalibrated at the dealership. Thanks for the great videos,
Before you replace it, try cleaning the windshield above it. Also examine the windshield for scratches, imperfections in the glass that may cause the windshield wipers to get triggered. You may have to have a new one calibrated to function properly.
Windshield is clean and crack free, so pretty sure I need a new sensor! Damn, was afraid I would have to pay the dealership to program it. May just learn to live without the rain sensor! Thanks for the quick response.
You can turn the auto wiper function off. Well you can on the ml350 and others. Just turn the windshield wiper to the off position. One turn in the on position is auto. One more turn in the on position is constant on etc.
Hello Keith. I had the same problem. I installed the sensor and I'm. still getting the light sensor that is still out. and the wipers still don't turn on by itself. The lights don't turn off by themselves how do you decode it? i have a 2008 Mercedesc300
I have a 05 SL500 MBZ and my light sensor light comes on also. I took off the plastic cover and when I took it off a metal plate fell off and was connected to a wire!....Where does this metal plate go to?....I mentioned a metal plate in your video. I cannot identify where this metal plate connects to?...Can you tell me where this metal plate connects to?...
Hi I have a 2004 clk240 the auto lights wipers and interior lights don’t work have tried another sensor and the fuse 9 seems fine battery in good order . Can I do a hard reset of the body control model without star diagnosis software thanks in anticipation spencer
The attached connector harness appears to be 4-5 inches long. Would it easier to gently pry the module off the glass 1sr, and then disconnect the connector? Also plugging the harness into the new module before sticking onto the glass,
Hi Keith, I have a 2005 C230 Kompressor with the "Light Sensor Drive..." message + all the symptoms (dimmed mirrors, headlights always on, etc.) I got a replacement sensor from eBay - that didn't solve the problem. I got a second one - same result. I also checked fuse #9 (Rain Sensor) and it's fine. What else might trigger that error message? Thanks
@@iRepairAutos No, no cracks on the windshield. And I was just reading that the light/rain sensor does not control the dimmed mirrors, so it's a separate issue. But I still have all the other symptoms of bad light/rain sensor: 1) headlights always on; 2) wipers going every 5sec instead of adjusting to rain intensity; 3) lights go off right away when stopping the car at night (instead of staying on for a few seconds)
I have this message. ( BRAKE evb, abs, esp inoperative. Diagnosis/rig test). Could you give me some ideas. I had 2 bad speed sensors but have replaced them. Nothing is now showing on my (icarsoft mb ii ) But I can get rid of the message. Any help would be appreciated. Thanks
check for loose connections on the suspension/shocks especially in the front of the vehicle. Pay attention to when it happens - I've seen this issue once before when turning the steering wheel all the way to the left/right. It was a loose electrical connection.
I am in need of an instruction video on how to install a catch can on an m111. There are a lot of people starting to get the c230 coupes and slks with high milage that are getting fouled maf sensors from oil in the air intake. Thank you!
Hey Keith my R350 hatch will 1: go up with the key fob 2: go up with the hatch lever 3: go up with driver side button 3: go down with hatch button (sometimes needs persuasion) Will not go down 1: with key fob 2: with driver side button It sounds like it's trying to go down when we press them but it only works with the hatch button. Any ideas ?
Take a look in the rear, I recall some of these use an hydraulic pump that gets temperamental or may get swamped in rain leaking in trunk (Benz like tank pools) 👍🏻
Hi, I have replaced the auto light sensor, all the lights and rain sensor working properly but, still have the message AutoLights Inoperative. The only thing that doesn't work is the auto light design for radio and the scrolling on the command controller. Any help ,will appreciate it.
Hey I have a question should I replace my entire manifold or just get the aluminum Aluminum Upgrade Intake Manifold Runner Lever Kit because I’m receiving the error code 2006
If you are doing the job yourself for yourself then I would get the aluminum parts and clean the internal flaps of the intake while the intake manifold is out of the vehicle. You will be able to inspect to see if the flaps are broken; If that's the case you have no choice but to replace the complete intake. If you are doing this job for someone else go ahead and replace entire unit.
Hi I've got an issue with my CLA. perhaps a different sensor issue maybe you might know and be able to help me? it's the display they call 'multifunction display' the one in between the speedo/revs that shows a digital display of speed/gear. it's constantly running on night time mode even in the day time so the light is so dim its impossible to read in day time but works fine at night. I'm thinking its either 1. the dimness switch (because this is overrun at night time and so works fine at night but not day when it's meant to set the brightness) or 2. its a daylight sensor somewhere telling the car its night time 24/7 and not registering that its day time. Any ideas?
You're correct, it's probably your light sensor fooling the car into thinking it's dark outside. You can verify by scanning it with a decent scanner. Icarsoft or better.
my benz had auto lights inoperable message i ordered new rain light sensor went to put in new sensor only to find out old sensor was not plugged in i plugged in wire to old sensor and everything worked so check wire first !
I have the same code on my ml350 2008 but light and windshield turn on automatically but the windshield speed up by itself do I still have to change it
I was sad when I saw the warming today. I tried what you said. Just touched the sensor and closed it back and it worked!!!!!!!!! Thanks for sharing your knowledge.
I had this error message on my MB and also noticed my car battery needed replacing! After replacing the battery turns out the sensor was fine all along! Good thing I didn't rush into fixing the problem !
I change my original battery for one in AutoZone you think if I put the original battery the msj from rain and auto light gone??
@@vegetasama1384 yes you should try to get a high quality battery with the same rating as the original.
I had a feeling i was going to see this in the comments thats definitely what im going to try tomorrow hopefully it fixes, mine is saying to leave it in park and let the battery charge
The sensor actually comes off by sliding the 2 little tags at the bottom corners
It leaves the mounting plate stuck to the windscreen but really good vid as always
Keith. Thank you so, so much for this video. I went on a long trip and my GL battery died, I charged while connected and fucked up all the electronics. This message was popping. So I did what you showed in your video, and by just disconnecting and reconnecting it back again, it started working and cleared the fault. Also the radio got fucked up, the steering wheel controls were not working, the radio wouldn't turn off when you turn off the car, a mess, so I did the same thing with the battery and everything started working again.
If you must remove the sensor, you could also use dental floss!!! Yes, wrap the dental floss around your fingers and gently CUT the the adhisive between the glass and the sensor. Real simple, no scratches of the glass or the sensor.
Excellent point!
@@iRepairAutos do you have a video to install a ABS MODULE ML350 2007
great video and easy to follow instructions with perfect technical instructions!
Where do I find the new sensor the part ?
My auto headlights no longer work nor does my rain sensor. I accidentally destroyed the wires. Is there a way I can order a new wire. I also need a new rear view mirror as those wires are destroyed as well.
.....Also, use rubbing alcohol to clean the remaining adhisive on the glass and prepare the area for installation of the new sensor.
Good point!
Thanks bro your the best i just saved some money for GEICO THANKS
I have a 2007 sl550.Wipers sporadically turn on, may run a couple of times, or run every 5 to 10 seconds. If I replace the sensor does it need to be recalibrated at the dealership. Thanks for the great videos,
Before you replace it, try cleaning the windshield above it. Also examine the windshield for scratches, imperfections in the glass that may cause the windshield wipers to get triggered. You may have to have a new one calibrated to function properly.
Windshield is clean and crack free, so pretty sure I need a new sensor! Damn, was afraid I would have to pay the dealership to program it. May just learn to live without the rain sensor! Thanks for the quick response.
You can turn the auto wiper function off. Well you can on the ml350 and others. Just turn the windshield wiper to the off position. One turn in the on position is auto. One more turn in the on position is constant on etc.
My w212 has this autolamp function inoperative also. Changed sensor on windshield. Nothing. Changed ocp. Nothing. What else is left??
Thanks.
Excellent video.
I can’t get that cover off. Is the card going in to push on that black fuzzy part?
Hello Keith. I had the same problem. I installed the sensor and I'm. still getting the light sensor that is still out. and the wipers still don't turn on by itself. The lights don't turn off by themselves how do you decode it? i have a 2008 Mercedesc300
I have a 05 SL500 MBZ and my light sensor light comes on also. I took off the plastic cover and when I took it off a metal plate fell off and was connected to a wire!....Where does this metal plate go to?....I mentioned a metal plate in your video. I cannot identify where this metal plate connects to?...Can you tell me where this metal plate connects to?...
Great vid ,thks for the info
Thanks for the feedback
Thank you ❤
Excellend video!
Hi I have a 2004 clk240 the auto lights wipers and interior lights don’t work have tried another sensor and the fuse 9 seems fine battery in good order . Can I do a hard reset of the body control model without star diagnosis software thanks in anticipation spencer
Cheers dude👍🏻
The attached connector harness appears to be 4-5 inches long. Would it easier to gently pry the module off the glass 1sr, and then disconnect the connector? Also plugging the harness into the new module before sticking onto the glass,
Hi Keith, I have a 2005 C230 Kompressor with the "Light Sensor Drive..." message + all the symptoms (dimmed mirrors, headlights always on, etc.) I got a replacement sensor from eBay - that didn't solve the problem. I got a second one - same result. I also checked fuse #9 (Rain Sensor) and it's fine. What else might trigger that error message? Thanks
Sounds like it could be a bad wiring connection or a bad fuse. Have you checked the fuses?
@@iRepairAutos yes, according to documentation it's fuse #9; I checked it and it's fine.
Is the windshield above the sensor scratched in anyway?
@@iRepairAutos No, no cracks on the windshield. And I was just reading that the light/rain sensor does not control the dimmed mirrors, so it's a separate issue. But I still have all the other symptoms of bad light/rain sensor: 1) headlights always on; 2) wipers going every 5sec instead of adjusting to rain intensity; 3) lights go off right away when stopping the car at night (instead of staying on for a few seconds)
After being replaced it has to be calibrated with the star diagnostic computer. It will not work until that is done.
I have this message. ( BRAKE evb, abs, esp inoperative. Diagnosis/rig test). Could you give me some ideas. I had 2 bad speed sensors but have replaced them. Nothing is now showing on my (icarsoft mb ii ) But I can get rid of the message. Any help would be appreciated. Thanks
check for loose connections on the suspension/shocks especially in the front of the vehicle. Pay attention to when it happens - I've seen this issue once before when turning the steering wheel all the way to the left/right. It was a loose electrical connection.
iRepair Autos ... ok I will. Thanks so much for the help and quick reply. Love you channel it has helped me out a lot
I have a 2005 compressor my censer is in same place I think but it’s different from yours can you put my model please
I am in need of an instruction video on how to install a catch can on an m111. There are a lot of people starting to get the c230 coupes and slks with high milage that are getting fouled maf sensors from oil in the air intake. Thank you!
Hey Keith my R350 hatch will
1: go up with the key fob
2: go up with the hatch lever
3: go up with driver side button
3: go down with hatch button (sometimes needs persuasion)
Will not go down
1: with key fob
2: with driver side button
It sounds like it's trying to go down when we press them but it only works with the hatch button.
Any ideas ?
Take a look in the rear, I recall some of these use an hydraulic pump that gets temperamental or may get swamped in rain leaking in trunk (Benz like tank pools)
👍🏻
Keith my 2010 GL450 has these message Auto Light Inoperative. How do I fix it?
I have a problem with my c250 amg I’ve changed the bulb but still my right side light don’t work it says intell light system inoperative help please
Is it in the same place for the cla 2014 plate
My rear interior light doesn’t come on when doors open and the ambient part doesn’t light up at night
CLS 2010 350 grand edition diesel
I have a 2014 Benz cls550, I’m getting an error message that says check left high beam but the low beam works fine
Hi, I have replaced the auto light sensor, all the lights and rain sensor working properly but, still have the message AutoLights Inoperative. The only thing that doesn't work is the auto light design for radio and the scrolling on the command controller.
Any help ,will appreciate it.
It could be your car's electricity. Might be the alternator or battery. Check the incoming electricity when the car is not running.
I have a 2008 ML350 and my message says Active Headlamps Inoperative. Is this the same fix? Thanks!
Hey I have a question should I replace my entire manifold or just get the aluminum Aluminum Upgrade Intake Manifold Runner Lever Kit because I’m receiving the error code 2006
P2006
If you are doing the job yourself for yourself then I would get the aluminum parts and clean the internal flaps of the intake while the intake manifold is out of the vehicle. You will be able to inspect to see if the flaps are broken; If that's the case you have no choice but to replace the complete intake. If you are doing this job for someone else go ahead and replace entire unit.
Hi I've got an issue with my CLA. perhaps a different sensor issue maybe you might know and be able to help me? it's the display they call 'multifunction display' the one in between the speedo/revs that shows a digital display of speed/gear. it's constantly running on night time mode even in the day time so the light is so dim its impossible to read in day time but works fine at night. I'm thinking its either 1. the dimness switch (because this is overrun at night time and so works fine at night but not day when it's meant to set the brightness) or 2. its a daylight sensor somewhere telling the car its night time 24/7 and not registering that its day time. Any ideas?
You're correct, it's probably your light sensor fooling the car into thinking it's dark outside. You can verify by scanning it with a decent scanner. Icarsoft or better.
@@iRepairAutos ok thanks i'll look into the light sensor first. I'll try find a friend or garage with a scanner.
Hello? I didn't get a response below. What is the fix for the "Active Headlamps Inoperative" error message on a 2008 ML350? Thanks!
simply scan and reset the crazy module else $$$$😂
How do you take messages off dash saying light centre go to work shop
Hey Keith, all of a sudden my auto lights, indicator, horn and ac isn’t working all at the same.. can you help me out here
What symptoms or changes did you make to the vehicle before this? Replace a battery or anything?
yep, you have to narrow things down as much as possible or else spend a lot of time chasing your tail: fuses boxes, wiring harness, bus scan.
my benz had auto lights inoperable message i ordered new rain light sensor went to put in new sensor only to find out old sensor was not plugged in i plugged in wire to old sensor and everything worked so check wire first !
Why does it fail? Is it worth taking off spraying contacts? Or does it get sun damage
sometimes it's dirt and just needs to be cleaned. Other times it fails for no real physically obvious reasons
I have the same code on my ml350 2008 but light and windshield turn on automatically but the windshield speed up by itself do I still have to change it
Bagus
❤
do you have a shop i can take my car to ??
No. I do these repairs at home. What state are you in?
I want the neck lace
Dude you're handsome! Live longer!!!
Fitted new censor
changed sensor but dash still says malfunction
The same ...
For some strange reason my replies aren’t showing up.. I keep replying to your comment after submitting it isn’t showing
That one showed up
For some reason I replied and it isnt going through ms sexy misss @ Gmail remove the space and add the .com
What do you mean?
Hello?
❤