Wow great tutorial. Love the channel. 2 years ago I ported my first saw with your videos. I did it for an arborist and he followed up with me a year later and told me it is the best saw he owns. I just bought a 462Cand plan on finishing this one for myself.
Wow 300 plus views and only 72 thumbs up come on people show some support for all this wonderful information and wonderful advice. It cost nothing to smash the thumbs up and it helps this gentleman with this channel. This certainly is peeking my interest to attempt a porting job. I have a couple old cylinders I will likely play with first. I think I might give it a go on my 55 husky to see if I can make it dance. I have a rebuild one and a stock one so it would be a good comparison for me. Thanks for all the info you provided. TC Mahalo Tinman 🤙🤙🤙 Ps. Happy birthday Charlie... wow one already... soon she'll be going off to university or college...give her all the hugs and cuddles you can buddy. 😂
I'm currently doing a bottom end on a Jonsered 2150 (Husqvarna 350). This is the THIRD time I'm doing it. The first time I installed Chinese junk,, second time I installed improperly. Finally on the third attempt got it right by freezing the bearings before inserting them into the seals. Now they clicked in nice and tight. Hopefully she runs when I get her back together. Great vid. Can't wait to see her run. I'm sure she'll be strong.
Addiction for sure you and @charlesbriscoe have me addicted up to 26 now, damn evilbay and a vevor 8x20 lathe does the job. Have a few clones theybare fun to test with because if a rod puts a hole in the gas tank atleast its in good fun and learning!!
Thank you Tinman for your advice, much appreciated. I have checked the squish its at .040", intake at 66 and exhaust at 93 after grinding to the chrome , the chrome isn't flaking its just worn, it must have done a lot of work, it came from a deceased estate, Happy birthday Charlie.
What you say about the original engineer and production line compromises is bang on. The book "Performance Two Stroke Tuning" has a whole chapter on "Blueprinting" at the very start if I remember correctly. The book says you're not trying to outsmart the engineers, but ensure their original design specs are actually met in the real world. Heard Donny Walker mention blueprinting before, I think it's very much a thing in the kart racing world but must apply to all engines logically.
I'll agree, ported saws are fun. I've done two bc of your channel. An Echo cs440 about 3 years ago, and a 268 with a 272 big bore this year. May see you at the Paul Bunyan show, not sure it'll work out.
Hi tinman picked up a 372 I want to put a big bore and port for a nice solid saw. I'll be picking your brain soon. Like how you explain how and why you do things. Keep them coming. Be kind❤❤
Excited see this one rip when it’s done. My buddy just gave me his dads old stihl 026. Excited to get running again, no clue how long it’s been since it ran last. Currently no spark. So waiting on some parts to show up for it. Then once I have it running good I do plan to port it. It’ll be my first.
Yeah from what little research I’ve done so far it seems to be. I’m also going to be basically making it an 026pro/ms260. From what I’ve found the only difference is the carb/air filter, tank vent and filter cover. I’ve already ordered all that. Hopefully have it running this coming weekend. New coil showed up today for it. Just waiting on the carb, spark plugs, and tank vent now.
@@St3althMonger you probably know that an 026 oils continuously when the motor is spinning. The PRO and the MS260 upgraded to a modern clutch driven bar oiler.
Happy Birthday Charlie!🎉 Tinman, I have talking to John Walker about porting my 592XP, what are your thoughts on this? Is it worth it? I’m just ordering a Walkerised cylinder and piston. Cheers.
Wow great tutorial. Love the channel. 2 years ago I ported my first saw with your videos. I did it for an arborist and he followed up with me a year later and told me it is the best saw he owns. I just bought a 462Cand plan on finishing this one for myself.
Happy birthday Charlie!🎊blessing to the Tinman family ♥️♥️
Happy Birthday little Tinman daughter 🎉 greetings from Germany 😉👍
Happy Birthday Charlie!
Happy birthday little one
Happy birthday charlie!! Greetings from Romania Europe.
Happy birthday! Congratulations on the first birthday my sons birthday is Friday I’m excited but can’t believe how fast this year has gone
Wow 300 plus views and only 72 thumbs up come on people show some support for all this wonderful information and wonderful advice. It cost nothing to smash the thumbs up and it helps this gentleman with this channel.
This certainly is peeking my interest to attempt a porting job. I have a couple old cylinders I will likely play with first. I think I might give it a go on my 55 husky to see if I can make it dance. I have a rebuild one and a stock one so it would be a good comparison for me. Thanks for all the info you provided. TC Mahalo Tinman 🤙🤙🤙
Ps. Happy birthday Charlie... wow one already... soon she'll be going off to university or college...give her all the hugs and cuddles you can buddy. 😂
Agreed! Cost me nothing to put my thumb up!
Happy bithday Charlie.
Very good video you explain your work well
Happy birthday Charlie
Saludos amigo desde Argentina!!
Great video
I'm currently doing a bottom end on a Jonsered 2150 (Husqvarna 350). This is the THIRD time I'm doing it. The first time I installed Chinese junk,, second time I installed improperly. Finally on the third attempt got it right by freezing the bearings before inserting them into the seals. Now they clicked in nice and tight. Hopefully she runs when I get her back together. Great vid. Can't wait to see her run. I'm sure she'll be strong.
Thanks for the Stihl; I know they're rare there, but are the flavor of the day here.
Congrats with you baby girl Timman!
Happy Birthday Charlie.. Much love to you all
HAPPY BIRTHDAY
Yep, sometimes less is more. Super easy to go too far!
Happy birthday Charlie!!
Been using those bits for a minute now and still love them, ordered a second set
That video was awesome for me to watch the before and after of what you did to increase air flow is awesome
Addiction for sure you and @charlesbriscoe have me addicted up to 26 now, damn evilbay and a vevor 8x20 lathe does the job. Have a few clones theybare fun to test with because if a rod puts a hole in the gas tank atleast its in good fun and learning!!
Thank you Tinman for your advice, much appreciated. I have checked the squish its at .040", intake at 66 and exhaust at 93 after grinding to the chrome , the chrome isn't flaking its just worn, it must have done a lot of work, it came from a deceased estate,
Happy birthday Charlie.
What you say about the original engineer and production line compromises is bang on. The book "Performance Two Stroke Tuning" has a whole chapter on "Blueprinting" at the very start if I remember correctly. The book says you're not trying to outsmart the engineers, but ensure their original design specs are actually met in the real world. Heard Donny Walker mention blueprinting before, I think it's very much a thing in the kart racing world but must apply to all engines logically.
I'll agree, ported saws are fun. I've done two bc of your channel. An Echo cs440 about 3 years ago, and a 268 with a 272 big bore this year. May see you at the Paul Bunyan show, not sure it'll work out.
Hi tinman picked up a 372 I want to put a big bore and port for a nice solid saw. I'll be picking your brain soon. Like how you explain how and why you do things. Keep them coming. Be kind❤❤
Send me an email when you're ready, I'll be waiting.
Excited see this one rip when it’s done. My buddy just gave me his dads old stihl 026. Excited to get running again, no clue how long it’s been since it ran last. Currently no spark. So waiting on some parts to show up for it. Then once I have it running good I do plan to port it. It’ll be my first.
Also I’m curious what bits those were that you were using.
That little 026 is a wicked little saw.
Yeah from what little research I’ve done so far it seems to be. I’m also going to be basically making it an 026pro/ms260. From what I’ve found the only difference is the carb/air filter, tank vent and filter cover. I’ve already ordered all that. Hopefully have it running this coming weekend. New coil showed up today for it. Just waiting on the carb, spark plugs, and tank vent now.
@@St3althMonger you probably know that an 026 oils continuously when the motor is spinning. The PRO and the MS260 upgraded to a modern clutch driven bar oiler.
Hey- where did you source the bits? Iffn I missed it….I’m old 😂
I'm here in England bristol building a o88
Happy Birthday Charlie!🎉 Tinman, I have talking to John Walker about porting my 592XP, what are your thoughts on this? Is it worth it? I’m just ordering a Walkerised cylinder and piston. Cheers.
Can't go wrong with a walkerized saw, donny is a master..
How's the tinman? Happy birthday baby Charlie. I didn't know hers was the day before mine.
Doin great Kurt
792 and 131…
People don’t appreciate the time that is spent on doing these 😮. Clicks are cheap and pay the creation for more videos 😊