Это видео недоступно.
Сожалеем об этом.

12v Vacuum Pump

Поделиться
HTML-код
  • Опубликовано: 12 фев 2013
  • Richard Demos our 12V Vacuum Pump, showing how to connect it up - and connects two up to show the increase in evacuation speed and vacuum.
    Available here : proto-pic.co.u...
    Check out our other UK SparkFun products: proto-pic.co.u...
    Check out our other UK Adafuit products: proto-pic.co.u...
    Check out our other UK Pololu products: proto-pic.co.u...

Комментарии • 97

  • @Mirandorl
    @Mirandorl 7 лет назад +10

    Parallel = 2Q, Series = 2P. If you want to drain the bottle more quickly use parallel configuration.

    • @wernerhiemer406
      @wernerhiemer406 5 лет назад

      2Q = ? 2P = P But I understand electrically they are connected in parallel but fluidal they are connected in series. Of course as in the last demonstration of that video. And yes I think also parallel (fluidal) would be quicker. What here happened is the pump near to "chamber" (the PET bottle) has to pump against a lower pressure which got generated by the second pump near the surounding atmosphere. But by design the leakage and pumps valves ability can't really mean suction of one plus suction of two means suction as a sum of both. If it is even possible by pumps of any design that way.

    • @magiclay
      @magiclay 2 года назад

      hi you if two of this pumps connected in series like on this video..will generate twice negative value? if one pump is -50kpa two of them in series will get -100kpa?

  • @newmattygosling
    @newmattygosling 10 лет назад +3

    you have saved me a lot of fussing about with a car tyre compressor! thankyou! i will be buying one in a couple weeks

    • @bellazheng3981
      @bellazheng3981 Год назад

      AJK Technology supplies all kinds of mini diaphragm pumps. Welcome to contact for samples!

    • @geomcc39
      @geomcc39 Год назад

      I used a small vacuum pump 12-volt to operate my 4 wheel drive on a old S10 pick up truck the vacuum actuator stop working !

  • @jackevans2386
    @jackevans2386 Год назад +1

    When hooked up in series, they're still limited by the vacuum ability of the last unit in the chain. Far better results are obtained if hooked up in parallel.

  • @geomcc39
    @geomcc39 Год назад +1

    do a video using this pump to do vacuum distillation . wonder how well it will work ?

  • @dimitriosa8tsipouras953
    @dimitriosa8tsipouras953 4 года назад

    when i start pump an air came out from pipe that suppose to be suck ? any idea why that happen? i try use this pump ti suck small seeds.

  • @magiclay
    @magiclay 2 года назад

    so if a need 28 mhg or -1bar will need 3 of this?

  • @johanjames8118
    @johanjames8118 10 лет назад +4

    How long is the life of the pump. And how long would it run continuously if required.

    • @ProtoPICVideos
      @ProtoPICVideos  10 лет назад

      I'm afraid we don't have a figure for the MTBF of the pump. They should run for a long time though?

    • @anassaleh9236
      @anassaleh9236 5 лет назад

      500 hours continuous it says on amazon

  • @paolouboldi4207
    @paolouboldi4207 11 месяцев назад

    I bought one and powered with a 12v 8.3a power supply, but it works in jerks and not continuously...

  • @magiclay
    @magiclay 2 года назад

    with that 2 pump in series what is the maximum negative pressure ..twice?

    • @duhsq
      @duhsq 9 месяцев назад

      -8 psi

  • @SnyderTools
    @SnyderTools 10 лет назад

    It was a 9v pump too!! Just realized your pump is 12v.

  • @thesalmonisdead
    @thesalmonisdead 2 года назад

    Hi how much vacuum could this pump achieve in a small vacuum chamber? say 16L

  • @DS-ed1tk
    @DS-ed1tk 4 года назад +1

    Can i use power supply 12V 1A for this pump ?

  • @carlessibila6406
    @carlessibila6406 5 лет назад

    Can be used as wet air suction aplication? (replace vacuum motor of a record cleaning machine similar to okki nokki), could the suction power be regulated trough a pressure gauge with liquid separator filter? My intention is use this kind of suction instead of usual vacuum motor.. Might this pump bé too much powerful or not? Thank you!

  • @yagomgapak2154
    @yagomgapak2154 8 лет назад

    I have been using this pump for my laboratory experiments over a month. Pump stopped working as connections in the coil inside the metallic body loosened. What do I do now? If I dismantle the pump to arrange the connection, will the metallic cover fit in exactly later on? Or are there other alternatives?

    • @ProtoPICVideos
      @ProtoPICVideos  8 лет назад

      Try it and see - never stripped one down to check.

  • @andrewkhchan
    @andrewkhchan 4 года назад

    Nice 👍🏼 video.... I’m making a small vacuum chamber (0.5L glass container ). Will this motor pump works for my project??? I really want to achieve zero atmospheric pressure. Thx

  • @omsingharjit
    @omsingharjit 4 года назад

    Can i use it for high volt plazma vacuum tube experiment ??

  • @mayrilia1400
    @mayrilia1400 6 лет назад

    can i know, if connected to battery, what type of battery should i use ?

  • @ravinalvasquezjr.694
    @ravinalvasquezjr.694 8 лет назад +1

    Can I used in break ? Because my alternator is low sanctions.

  • @haroldwcastanom9960
    @haroldwcastanom9960 5 лет назад

    How much weight can this pump withstand, when used as a claw?

  • @alihanafia4990
    @alihanafia4990 3 года назад

    Hi. Nice video.. 👍👍
    Can this use to vacuum air conditioner system?
    Thanks..

  • @amritcooshnea3330
    @amritcooshnea3330 4 года назад

    Will the vacuum pump get damage if it continue to suck air from the bottle?

    • @ProtoPICVideos
      @ProtoPICVideos  4 года назад

      No and Yes! No it won't get damaged as such, as that is what it is designed to do. However it will wear out eventually! We have never burned one out though in any of our projects!

  • @grassjars4143
    @grassjars4143 9 лет назад

    What are you using as a power supply and how long will the battery last before needing to be charged?

    • @ProtoPICVideos
      @ProtoPICVideos  8 лет назад

      +Grass Jars - It was run off a bench power supply.

  • @freerideking14
    @freerideking14 7 лет назад

    Would this work for use as a compressor to force steady airflow for cooling?

  • @luongmaihunggia
    @luongmaihunggia 4 года назад

    Does it work in reverse? As in does it generate electricity if you pump air into it?

    • @SofaKing_Kong
      @SofaKing_Kong 4 года назад

      no i don't think that would work

  • @lancesmith1874
    @lancesmith1874 6 лет назад

    Great video! What's the smallest portable battery I'd need to adequately power this pump? Thank you.

    • @bellazheng3981
      @bellazheng3981 Год назад

      AJK Technology supplies all kinds of mini diaphragm pumps. Welcome to contact for samples!

  • @nikolicaboskovic
    @nikolicaboskovic 10 лет назад

    ProtoPICVideos Friend, is any possible to create vacuum pump with air compressor ? (Compressor for painting )

  • @angelcontreras4730
    @angelcontreras4730 5 лет назад

    You have to inyect air with a compressor?

  • @SnyderTools
    @SnyderTools 10 лет назад

    I recently bought one of these off of eBay. Hooked it up to a momentary switch and a 9v battery. It worked great, however the battery got extremely hot! What did I do wrong?

    • @CruzMonrreal
      @CruzMonrreal 9 лет назад +4

      9v batteries aren't built for such large current draws.

    • @bellazheng3981
      @bellazheng3981 Год назад

      AJK Technology supplies all kinds of mini diaphragm pumps. Welcome to contact for samples!

  • @Hampe_Bampe
    @Hampe_Bampe Год назад

    Can i run water through this pump?

  • @stathisbikos6563
    @stathisbikos6563 9 лет назад

    cool video. I was kinda bumped to see that the pump won't hold vacuum when turned off, but I can take care of that with a check valve.
    On an unrelated note: What's that song in the beginning/end?? :D

    • @ProtoPICVideos
      @ProtoPICVideos  8 лет назад +1

      +Stathis Bikos - Hi, it's a copyright free track, I got it off a CD collection, but the CD has been lost for a long time.

    • @chrisd857
      @chrisd857 5 лет назад

      I've heard it as the opening track of Chiptek by she. Link here: ruclips.net/video/SUTqM7JeTUY/видео.html

  • @sktosbirul8316
    @sktosbirul8316 6 лет назад

    Hlo sir thanks for this video . But sir I have a question how to set the gauge full video tutorial. Thanks again.

  • @shahirfan8224
    @shahirfan8224 5 лет назад +1

    can i use both connection for double vacuum?

    • @ProtoPICVideos
      @ProtoPICVideos  4 года назад

      Yes indeed you can, did you try it already?

  • @mubashirmasood5227
    @mubashirmasood5227 5 лет назад

    Can Book pages pick through this vacuum pump

  • @chansukim7910
    @chansukim7910 7 лет назад

    Did you able to adjust the amount of pressure ? or force of the pressure?

    • @ramonp.886
      @ramonp.886 6 лет назад

      You'd need a pressure sensor attached to a control board and relay switch to make it easy.

  • @IesusAquilaLeo
    @IesusAquilaLeo 4 года назад

    Hi! how is the pressure range controlled? and or the vacuum range???

    • @bellazheng3981
      @bellazheng3981 Год назад

      AJK Technology supplies all kinds of mini diaphragm pumps. Welcome to contact for samples!

  • @workpeaceful9066
    @workpeaceful9066 4 года назад

    use DIY Vacuum Solder Sucker ?

  • @whitenorthstar
    @whitenorthstar 10 лет назад

    Would one of these vacuum pumps do for a desoldering pump or would 2 in series be better? I'm making my own desoldering pump and any help would be brilliant! thanks in advance,

    • @ProtoPICVideos
      @ProtoPICVideos  10 лет назад

      It may do. If you watch the product video, it will give you an idea of the vacuum produced. Try one.

    • @whitenorthstar
      @whitenorthstar 10 лет назад

      Thanks, will let you know if it does the trick for me,

    • @bobhaha
      @bobhaha 9 лет назад

      john porter Did it work? I have a very similar pump. Need to know what you ended up doing.

    • @whitenorthstar
      @whitenorthstar 9 лет назад

      Sorry bobhaha i never got round to it as i had so much work on, A friend of mine made a desolder pump out of a similar setup and it worked very well, But decent solder pumps arnt that expensive these days as i found out, theres a nice gun type out there that that Australian guy did a video on...evlog i think his channel is,

    • @bluetorch13
      @bluetorch13 9 лет назад

      john porter I came looking for the exact same thing. I know It may not pull straight from the solder, but I want to connect it to a can, so It can charge a lower pressure and control it through a valve. :D

  • @TW39
    @TW39 2 года назад

    Can u use pneumatic mini air cylinders on that pump

    • @geomcc39
      @geomcc39 Год назад +1

      I used a small air tank pressurized , and a normal closed electric solenoid with relay and motion activated to operate a Halloween decoration using air cylinder . check out Halloween video a lot of people use them for this idea good luck !

  • @baruakapitalis
    @baruakapitalis 5 лет назад +3

    5:01
    5:59

  • @philipmendorensis8687
    @philipmendorensis8687 4 года назад

    Does anyone know how many psi this vacuum can suck?

    • @duhsq
      @duhsq 9 месяцев назад

      -8

  • @arsenechoya123
    @arsenechoya123 8 лет назад

    what is the torque constant? anyone!

  • @Mogsoni
    @Mogsoni 3 года назад

    would this pump pull some oil through a 0.22 micron filter?

    • @ProtoPICVideos
      @ProtoPICVideos  3 года назад

      It should do, depending on viscosity of oil etc.!

  • @mertklck
    @mertklck 6 лет назад

    how long the engine runs without stopping ? max

  • @KenTeague72
    @KenTeague72 8 лет назад +1

    Where do you purchase the vacuum pumps?

    • @ProtoPICVideos
      @ProtoPICVideos  8 лет назад

      +Ken Teague - Hi, we sell these on our store, also available from Sparkfun.

    • @bellazheng3981
      @bellazheng3981 Год назад

      AJK Technology supplies all kinds of mini diaphragm pumps. Welcome to contact for samples!

  • @pradeep-ez3dr
    @pradeep-ez3dr 6 лет назад

    Is its suitable for air vacuum pump...?

  • @giannaras2010
    @giannaras2010 9 лет назад

    is this motor a DC motor or a AC motor?
    thanks!

  • @johnrobinson4445
    @johnrobinson4445 5 лет назад

    So, basically it can remove as much as about half of the air. Got it.

  • @GetDatMoney212
    @GetDatMoney212 10 лет назад +2

    WE CANT SEE THE INSIDE OF THE PUMP >:(

  • @grzegorzm6009
    @grzegorzm6009 8 лет назад

    where you can buy?

    • @ProtoPICVideos
      @ProtoPICVideos  8 лет назад

      +Grzegorz Masny - Hi, the link is in the description! proto-pic.co.uk/12v-vacuum-pump/

    • @bellazheng3981
      @bellazheng3981 Год назад

      AJK Technology supplies all kinds of mini diaphragm pumps. Welcome to contact for samples!

  • @ChrisD__
    @ChrisD__ 3 года назад

    Haha, unexpected shemusic!

  • @anassaleh9236
    @anassaleh9236 5 лет назад

    Every time i plug it to my power supply the power supply goes off

    • @richardwinton1016
      @richardwinton1016 5 лет назад

      this pump draws about an amp. if you have a lesser power supply, it will crowbar. So the supply will shut down to protect itself. you need to get a beefier power supply, or if yours has an adjustable current limit, turn it up beyond one amp

  • @mixit247
    @mixit247 3 месяца назад

    That thing needs a muffler

  • @mishu9356
    @mishu9356 4 года назад

    Fake