Wel first I think you put the sight on the plate upside down, the four bumps or dots on the corner go into the bottom of the sight itself they even have little concave spots for it. But second how did you get the little grey lock thing to fit so easily? Mine wouldn’t fit at all so I left it off
you dont need anything seperate. As long as you get the SIG sight shown in the video and you have a vfc/proforce p320 the sight will come with an alan screw driver and a normal screw driver as well as the plates for the sight.
@@callsignblight1281 nope everything is done and mounted as far as rmr. I was just curious the two screw that I removed from the bottom to remove the sights. I didn’t put them back in
nice quick rundown of the install. do you have a zero'ing video of this red dot? 😊🤓
Nice vide whats up with the black grips looks💯🔥
Hey did you use a grip tape to get your grips black? If so care to share what they are? I’d like to buy some!
Wel first I think you put the sight on the plate upside down, the four bumps or dots on the corner go into the bottom of the sight itself they even have little concave spots for it. But second how did you get the little grey lock thing to fit so easily? Mine wouldn’t fit at all so I left it off
Orpaz Tactical makes a really good and relatively cheap holster now that you have the sight on your sig! Orpaz Tactical R-series holster!
Although you also have a mounted light...so you might want to browse their other options like the Q-series...goes up in price though.
Thanks for the info! I actually just received a custom kydex holster from JMCustrmKydex in multicam!
Can’t find a right answer on that… Is this Sig red dot is mountable on a P320 (no M17 nor M18, the P320 pellet) ?
… because the Sig website say no, but others say yes… I’m lost :-)
What type of screwdriver/addons do you need to buy separately to do this ?
you dont need anything seperate. As long as you get the SIG sight shown in the video and you have a vfc/proforce p320 the sight will come with an alan screw driver and a normal screw driver as well as the plates for the sight.
Is this flipped? Looks like you're tightening counter clockwise?
Yes. I seem to have missed that. I'll be keeping it the correct orientation next time.
Any tips on unscrewing the plate? I think there's loctite or something because I'm slowly destroying the screws, sadly... These 3 screws are hell 😭
Same
Blast them with a hairdryer
yup two came out & third is shredded to hell not sure what to do now...
Does this work with airsoft glocks??
where to buy it sir?
What’s the name of that flashlight mount?
It is a TLR-1 HL
This video is flipped horizontally (left and right reversed).
It is flipped vertically! Maybe with the same result, but I found that it was easier to follow along that way!
I had a feeling something was off watching the screwdriver turn left to tighten the screws unless he was in Australia.
@@kaosraynz5265 Do they tighten screws the opposite way in Australia?
Bottem two screws do not go back in correct ?
Are you having trouble with the two screws mounting the rmr plate?
@@callsignblight1281 nope everything is done and mounted as far as rmr. I was just curious the two screw that I removed from the bottom to remove the sights. I didn’t put them back in
They do need to be reinstalled. There is a third screw in the center that might be holding it on for you, but the blowback may harm it long-term.
@@callsignblight1281 how did you get the rear sight off?