Dialing in your attention is more important than dialing in your loader. Its only as good as the operator. But otherwise, excellent advice, knowledge, and acknowledgment of MR RUSH. THANKS FOR YOUR WILLINGNESS TO SHARE YOUR KNOWLEDGE AND EXPERIENCE. CAN'T GET ENOUGH MISTER.
I have never reloaded shotgun shells, but I just got a used Mec600 and can't wait to give it a try. I'm glad I came across your channel to learn from you. God bless you much my friend!
HEY ... Appreciate you taking the time to video such a good informational video about reloading shotgun shells and that that their MEC reloader thank you ... Thank you for Putting Jesus into this TO ! ... Be Blessed ... Amen
Tim can you do a video on how to change the crimp starter I can't find a video on it and I'm new to reloading just getting started actually and bought my MEC 600jr second hand and it didn't come with the instructions to change it
Hey Brian thanks for stopping by the channel again and watching the video at the moment I'm not setup for reloading but if you will look up Bubba Rountree Outdoors Wade Rush. Ask him in the comments on his previous video and he will do just that he will make you an in-depth video how to change the crimp starter from a 8 point to a six-point cramp
@@outdoorswithtim.576 Thanks for the information with that I do already follow him actually that's where I found your page at but if I can't find one soon I'll definitely ask thanks again for the information Tim I really appreciate it it's tough just getting started with second hand stuff but I have always wanted to learn and bullets definitely aren't cheap anymore my rifle bullets are over 70 dollars a box but I shoot a 300 win mag and it's nearly impossible to find Buck shot so I'm trying my hand at making it now
Yes it is possible as long as the shells are all.the samw length. Try euro hulls like chedditte, and federals with our any trimming . Your crimps will not go well
Hey, so I was given a Mec600 jr, I think it’s got all the pieces, I’ve spent the last month or so trying to teach myself and learn on RUclips and forums and things, today I finally tried to resize and deprime a few shells and the shells are getting stuck in the resize die along with not depriming, I haven’t even bought powder or anything yet but nervous of the whole thing
Try taking those components apart making sure they're clean and free of debris and dust or any rust. Also make adjustments to your deprime until the punch goes all the way through the bass
. The Remington Gun Club and the AA 's are real close in dementions. Most Remington hulls ,from the Nitro Gold to field loads are made the same way. They will definitely work.The Super Handicap I used to know what the difference was ,but I forgot. You showed up in my notifications this time.
Hey Tim. Great video. I just bought 2 of the MEC 600 jr's. Both of them are complete as far as I can see. I paid $200 for both of them and with the two presses I also got a dozen Charging Bars in every caliber from 10guage to 410. As well as four bottles for powder and shot, as well as a number of other odds and ends and a shopping bag full of empty shells. I think I got a pretty good deal for that price. Everything appears to be in good shape. What I'm wondering is - are these presses exclusively for shotshell reloading, or can they be converted to reloading pistol rounds? Your opinion would be greatly appreciated. As will as anyone else that cares to respond to this comment. 🙂 God bless you brother. Thanks again.
Hey Joseph thanks for stopping by the channel and watching the video also let me tell you thank you so much for taking the time to leave this comment and share your fines in your experiences with me I think you got a great deal two of those MEC Reloaders and a bunch of accessories along with it for that price yes sir you did nothing wrong with that. Unfortunately Mac juniors are made just for the specific caliber shotgun cartridges you can buy other components and convert them over to a different shotgun caliber. But if you want to reload rifle rounds and pistols you will have to purchase reloader for those types of ammo cartridges. I hope this helps I hope you will continue to watch some of my videos I'm not the best reloader out there but I do enjoy doing it if you haven't checked out Wade Rush bub around tree Outdoors at RUclips please check out Bubba Roundtree Outdoors on RUclips. Brother Wade Rush is definitely a professor when it comes to reloading and he's good about answering any questions anyone has he is a good friend and a brother in Christ of mine. God bless you hope to hear from you again
Dialing in your attention is more important than dialing in your loader. Its only as good as the operator. But otherwise, excellent advice, knowledge, and acknowledgment of MR RUSH. THANKS FOR YOUR WILLINGNESS TO SHARE YOUR KNOWLEDGE AND EXPERIENCE. CAN'T GET ENOUGH MISTER.
I have never reloaded shotgun shells, but I just got a used Mec600 and can't wait to give it a try. I'm glad I came across your channel to learn from you. God bless you much my friend!
Hi lam new to this would like to know what wad to use in a rem sts shell 12 ga. Thanks
Where or who makes those replacement Spindex's? Those look like they might be much better than the plastic ones
Union should display on the left.
HEY ... Appreciate you taking the time to video such a good informational video about reloading shotgun shells and that that their MEC reloader thank you ... Thank you for Putting Jesus into this TO ! ... Be Blessed ... Amen
Picked up a 600jr for $45. Excited to get loading! Thanks for the video
Awesome. It's addictive
Been going well ! Found “my load” already . AA hulls, 1oz , 20.5 Win SHCP, cb-110012.
What keeps the shot from dumping when you pre-crimp and final crimp? 10:29
Because you slide your charge bar back over before you bring your RAM up. Watch the video again thanks for the great question though
Great video Tim I love to reload
Hey thanks for watching brother Junior hope you're doing well
What bushing are you using
Hello brother good to see back GOD BLESS
I have reloaded my share of rounds and found that the wad I use to the hunt I am doing thanks for video
Thanks for watching deer corner be safe on your journey look forward to talking to you again soon
Tim can you do a video on how to change the crimp starter I can't find a video on it and I'm new to reloading just getting started actually and bought my MEC 600jr second hand and it didn't come with the instructions to change it
Hey Brian thanks for stopping by the channel again and watching the video at the moment I'm not setup for reloading but if you will look up Bubba Rountree Outdoors Wade Rush. Ask him in the comments on his previous video and he will do just that he will make you an in-depth video how to change the crimp starter from a 8 point to a six-point cramp
@@outdoorswithtim.576 Thanks for the information with that I do already follow him actually that's where I found your page at but if I can't find one soon I'll definitely ask thanks again for the information Tim I really appreciate it it's tough just getting started with second hand stuff but I have always wanted to learn and bullets definitely aren't cheap anymore my rifle bullets are over 70 dollars a box but I shoot a 300 win mag and it's nearly impossible to find Buck shot so I'm trying my hand at making it now
Where did you get the precrimp and final crimp parts
They are not standard for a mec
MEC Outdoors and EBAY.
Yes it is possible as long as the shells are all.the samw length. Try euro hulls like chedditte, and federals with our any trimming . Your crimps will not go well
Hey, so I was given a Mec600 jr, I think it’s got all the pieces, I’ve spent the last month or so trying to teach myself and learn on RUclips and forums and things, today I finally tried to resize and deprime a few shells and the shells are getting stuck in the resize die along with not depriming, I haven’t even bought powder or anything yet but nervous of the whole thing
Try taking those components apart making sure they're clean and free of debris and dust or any rust. Also make adjustments to your deprime until the punch goes all the way through the bass
Also don't hesitate to look up Bubba Rountree Outdoors talk to Wade Rush the guy is a wizard when it comes to that MEC Reloaders
Thank you so much for these videos, I’m new to this. Where can you find good source for load data. Thank you and god bless.
MEC OUTDOORS.
BUBBA ROUNTREE OUTDOORS @ RUclips.
Thank you for watching
. The Remington Gun Club and the AA 's are real close in dementions. Most Remington hulls ,from the Nitro Gold to field loads are made the same way. They will definitely work.The Super Handicap I used to know what the difference was ,but I forgot. You showed up in my notifications this time.
Wow A perfect crimp Lol I am a little jealous
Great job great job😅
how much this one and if this illegal or legal ..?
@@BilalKhan-yh2qm Legal as I know in the United States of America 🇺🇸
@@outdoorswithtim.576 i want this but iam in Dubai now so how can I order this without any problem ...?
@@outdoorswithtim.576 thanks for your information bro .how much this one ..?
Wade Rush is a great guy. Check him out.
@@BigBosley Wade is an awesome guy we speak a lot to each other over the phone and occasionally get to see each other in person. Thanks for watching
Hey Tim. Great video. I just bought 2 of the MEC 600 jr's. Both of them are complete as far as I can see.
I paid $200 for both of them and with the two presses I also got a dozen Charging Bars in every caliber from 10guage to 410. As well as four bottles for powder and shot, as well as a number of other odds and ends and a shopping bag full of empty shells.
I think I got a pretty good deal for that price. Everything appears to be in good shape.
What I'm wondering is - are these presses exclusively for shotshell reloading, or can they be converted to reloading pistol rounds?
Your opinion would be greatly appreciated. As will as anyone else that cares to respond to this comment. 🙂
God bless you brother.
Thanks again.
Hey Joseph thanks for stopping by the channel and watching the video also let me tell you thank you so much for taking the time to leave this comment and share your fines in your experiences with me I think you got a great deal two of those MEC Reloaders and a bunch of accessories along with it for that price yes sir you did nothing wrong with that. Unfortunately Mac juniors are made just for the specific caliber shotgun cartridges you can buy other components and convert them over to a different shotgun caliber. But if you want to reload rifle rounds and pistols you will have to purchase reloader for those types of ammo cartridges. I hope this helps I hope you will continue to watch some of my videos I'm not the best reloader out there but I do enjoy doing it if you haven't checked out Wade Rush bub around tree Outdoors at RUclips please check out Bubba Roundtree Outdoors on RUclips. Brother Wade Rush is definitely a professor when it comes to reloading and he's good about answering any questions anyone has he is a good friend and a brother in Christ of mine. God bless you hope to hear from you again
can i order this ❤
MEC Outdoors. On Line.
@@outdoorswithtim.576 thanks
I love how the Gadsden flag is super imposed under the flag. I think the US flag should have that on the bottom. Long live the republic.
Hogdon doesn't make red Dot alliant does the do make one similar that is called imr Red
thanks for calling me out. I did miss speak
Good God 29 grains of red Dot WTF dude how fast are you get those things going I never use More than maybe 19 grains of red Dot for 1 1/8
sorry for the confusion I meant to say that I was using a 29 powder bushing. I get excited when I'm reloading
Red Dot 🔴 isn’t Hodgden it’s Alliant pwdr
I believe the word you were looking for is Handicap,, not hand cap
Someone commented before they watched the entire video.
Tim Figured that out when he looked at the hulls again.