Great, I have the Makita's 3" & 6" and there one solid unit. As long as they are less expensive than the Malco's I can see them selling more. Although knowing the quality of Malco It is yet to see how long they last.
@@34doctor34 I have the malco ones I got like 5 years ago and never needed anything else. I have the little 4 position malco nut driver I use every day for the 1/4 driver. It’s thinner walls so it fits in the spots I need. Klein, ideal, craftsman, snapon, and wiha don’t fit. I have an old craftsman that fits but it has seen better days. Any modern one doesn’t fit. If you find nos and it’s all yellow it might fit. The malco has 5/16 and 7/16 so I use those too
they are nice for service thats about it tbh, the orginal malco hex chucks are really compact and hold the screws alot better for putting ductwork together, you just toss them once they get to gunked up
Not difficult to clean debris out of regular magnetic sockets. Just need safety glasses, and compressed air. It is kind of annoying though and those new flip sockets are pretty cool. Sheet-metal and electrical tool manufactures. I’ve been making those for a while now.
Saw the video yesterday, ordered on the Home Depot delivery link, received same day, used for work today. Great product, not only was it easier to clean out the shavings but it also doesn't get clogged up as fast, I'm thinking they may have engineered it so the shavings don't get magnetized as often? Either way, 2 thumbs up 👍👍 Great review, thanks for the content. It helps me be more productive at work and for that I gotta give props.
Hey 👋 Vince I try to blow the metal shavings off the area before I pull the fasener off the screw and they are great for window treatments they go right through no problems @ VCG construction ✌🏻
Loved it Vince. While this solution won't change my job since I don't do metal or HVAC, but I can see the productivity improvement just by a better way to clean it.
I'm in Australia, so not sure about others regions, but Irwin have been doing these for a while now in different sizes. Have been using them for at least 2 years now for the exact same reason of getting frustrated with the build up of material on traditional types and then throwing them out
I prefer Dewalt for longevity and EASE of bit removal from their holders, unlike Milwaukee, but I've always had to order in bulk for this exact build-up issue and camming out ruins the bits. The color bands are nice and I'll be looking for this kit on my next run. Thanks Vince! 💫
Dude! You almost had me, but somewhere just before the 4 minute mark I started wondering why you weren't just using Malco or Klein flip sockets. Gotta say though, you did your usual outstanding job of making it sound like the innovative, cutting-edge engineers over at Milwaukee might have had an original thought. Good job!
VCG. This was and insightful, helpful and interesting video. I hope you have the most wonderful day as you possibly can, and keep up this amazing work!
That nut driver bro is a beautiful thing if you're a plumber we have what we call no hub and wide body bands that go to the pipe and that's exactly what we use to take the bands apart and put new pipes in without having to glue any joints. Absolutely love the nut drivers. What I would suggest is if they can have on the one key a specific poundage of torque maybe like 60 lb 80 lb and 120 This would become more efficient in our line of work as a plumber 💯🙌🦍 And bro why would you throw it away All you got to use is the same screw you're using the screw into the metal use the head of that to clean out the shavings and you're done in 5 seconds instead of wasting eight bucks on the nut drivers.
I usually just steal a roll of HVAC putty that they use on their bolt together seams. A little ball of that putty cleans out the nut drivers like new in about 10 seconds.
What I want to know is when did screws become fasteners? I agree that the metal shavings do clog the bits. But I prefer the bits made by DeWalt. They have a stronger magnet and can be clearly out with a small screw driver. Just my preference...
idk about the Milwaukee magnet on these reversible bits but the malco wouldn't be able to keep a 1-1/2" teks which sucks when I have to install a turning vane in a duct that has liner inside
None of those new magnetic extensions hold up and you have to replace them constantly. It’s the same as the old except you can flip between sizes. That’s it
Bro, just use a tweaker flathead screwdriver to clean out shavings. I use Dewalt pivot head nut driver (by far the best impact drivers). I can't see throwing those out.
Would be even nicer if they made a quick release that lets a collar slide a bigger size down over a smaller size. It would just need to be an internal and external hex on the smaller size then the bigger size is same size as the external hex.
just buy the malco bits they are better, and on top of that before i had the malcos i would roll a ball of butyl gasket, get it somewhat dirty and stick that into the bit repeatedly and it cleaned it well
I thought everyone knew to use an air compressor to blow out the nut driver debris, it couldn't be any easier literally takes less than a second and good as new, now go grab your nut drivers back out of the trash.
Sounds like you forgot if your dentine fix 😂😂😂 But what you are missing is the flip drivers magnets wear out quickly and they don't fit the malco screws well and you get cam out there too
I bought these nut setters at home Depot before they had them on the pegs yet. But haven't used them yet the fitment is loose and are a bit girthy compared to malcos so they are on the back up for me. And would have loved these when I was a cable installer but not even malco was making them then.
Milwaukee did not invent that tool I’ve been using those for years. I do believe they were first invented by Klein I’ve been using them for almost 10 years
What I do to offset that issue.. I keep a pack of gum with me 😎😉.. if it becomes a problem, I chew a gum real quick and clean it out by pressing gum into it
This is just like apple saying look what we invented even though somebody else has had it for years Milwaukee didn't come up with the idea they just copied somebody else
You Need This Accessory If Your Using Impact Drivers!
ruclips.net/video/1gkFWiKvNnU/видео.html
So basically its the Malco with Milwaukee branding
Love my Malco’s..
Malcos are way better imo
Great, I have the Makita's 3" & 6" and there one solid unit. As long as they are less expensive than the Malco's I can see them selling more. Although knowing the quality of Malco It is yet to see how long they last.
Yet it strips out so much faster than a malco
@@34doctor34 I have the malco ones I got like 5 years ago and never needed anything else. I have the little 4 position malco nut driver I use every day for the 1/4 driver. It’s thinner walls so it fits in the spots I need. Klein, ideal, craftsman, snapon, and wiha don’t fit. I have an old craftsman that fits but it has seen better days. Any modern one doesn’t fit. If you find nos and it’s all yellow it might fit. The malco has 5/16 and 7/16 so I use those too
I am a apartment maintenance guy this is so much better then trying to clean the old ones out
Surely looks like MALCO or KLEIN
True but the kleins is horrible
@@johnkapp8479 The recent kleins I have are not bad. Wonder if beginning batches were crappy?
@@johnmaranuk1842 IMHO it does not hold the Sheetmetal screw well while using a drill/driver and making new holes. it is acceptable when used by hand
@@johnkapp8479 what’s wrong with the Klein?
they are nice for service thats about it tbh, the orginal malco hex chucks are really compact and hold the screws alot better for putting ductwork together, you just toss them once they get to gunked up
Not difficult to clean debris out of regular magnetic sockets. Just need safety glasses, and compressed air. It is kind of annoying though and those new flip sockets are pretty cool. Sheet-metal and electrical tool manufactures. I’ve been making those for a while now.
Saw the video yesterday, ordered on the Home Depot delivery link, received same day, used for work today. Great product, not only was it easier to clean out the shavings but it also doesn't get clogged up as fast, I'm thinking they may have engineered it so the shavings don't get magnetized as often? Either way, 2 thumbs up 👍👍 Great review, thanks for the content. It helps me be more productive at work and for that I gotta give props.
Looks kinda like the malco accessory...
From what he said it is a piece of junk like it too. I don't want a shallow bit. Too much wobble.
Kinda? It literally is the exact same as malco.
I have malco and freaking love them!
ive been using the malco 1/4 5/16 and a 5/16 3/8 reversible chuck for years now
Hey 👋 Vince I try to blow the metal shavings off the area before I pull the fasener off the screw and they are great for window treatments they go right through no problems @ VCG construction ✌🏻
Loved it Vince. While this solution won't change my job since I don't do metal or HVAC, but I can see the productivity improvement just by a better way to clean it.
I'm in Australia, so not sure about others regions, but Irwin have been doing these for a while now in different sizes. Have been using them for at least 2 years now for the exact same reason of getting frustrated with the build up of material on traditional types and then throwing them out
I prefer Dewalt for longevity and EASE of bit removal from their holders, unlike Milwaukee, but I've always had to order in bulk for this exact build-up issue and camming out ruins the bits. The color bands are nice and I'll be looking for this kit on my next run. Thanks Vince! 💫
Dude! You almost had me, but somewhere just before the 4 minute mark I started wondering why you weren't just using Malco or Klein flip sockets. Gotta say though, you did your usual outstanding job of making it sound like the innovative, cutting-edge engineers over at Milwaukee might have had an original thought. Good job!
I have the malco.
VCG. This was and insightful, helpful and interesting video. I hope you have the most wonderful day as you possibly can, and keep up this amazing work!
Glad you enjoyed it TRZ and I appreciate your continued support of the channel through your membership subscription, Thank you!
Yinzer v Jawn: Tool Review Takedown 2024
@@sethbracken lmao..... I hate the word "JAWN"! lol
You can clean it out with isopropyl and compress air as well pretty simple and that tool is an offbeat of the Malco flip bit
Test it with zip screws, I use the malco accessory for work and the zip screws always fall off in tight areas
That nut driver bro is a beautiful thing if you're a plumber we have what we call no hub and wide body bands that go to the pipe and that's exactly what we use to take the bands apart and put new pipes in without having to glue any joints. Absolutely love the nut drivers. What I would suggest is if they can have on the one key a specific poundage of torque maybe like 60 lb 80 lb and 120 This would become more efficient in our line of work as a plumber 💯🙌🦍 And bro why would you throw it away All you got to use is the same screw you're using the screw into the metal use the head of that to clean out the shavings and you're done in 5 seconds instead of wasting eight bucks on the nut drivers.
Nice! Thats a good idea. I also like the color coding they put on these and some of their other stuff. It’s so much easier for me to see.
Totally!
Blow gun with a small tip at about 125 psi generally gets enough of the chips out when I do it.
I've used both and the Malco seats better and fits in tighter spots. And the bit holds onto the shaft more securely.
Milwaukee is years behind Malco with this “New solution”.
@@brucestorey917 i agree
Nice Spyderco Knife! BTG and VCG would be a hell of a combo, no nut setters would be safe.
Vince, when is milwaukee going to release the debris catcher that attaches to the 0970-20 vacuum & a part number if you know thx
I usually just steal a roll of HVAC putty that they use on their bolt together seams. A little ball of that putty cleans out the nut drivers like new in about 10 seconds.
What I want to know is when did screws become fasteners? I agree that the metal shavings do clog the bits. But I prefer the bits made by DeWalt. They have a stronger magnet and can be clearly out with a small screw driver. Just my preference...
I've used the dewalt version of the for the last 5 years comes with a case and 4 sizes 20$
Just a point. You should be using the self tapping setting on the drill..
I use my Klien 7n 1 it’s the same longer reach on shank with they were deeper set tho
i got a makita set years back that had similar setup.
idk about the Milwaukee magnet on these reversible bits but the malco wouldn't be able to keep a 1-1/2" teks which sucks when I have to install a turning vane in a duct that has liner inside
None of those new magnetic extensions hold up and you have to replace them constantly. It’s the same as the old except you can flip between sizes. That’s it
I don’t think people know there’s a Malco version of this. You guys should comment this more.
Wait, there a Malco version?
🤣🤣👍🏻👍🏻
Bro, just use a tweaker flathead screwdriver to clean out shavings. I use Dewalt pivot head nut driver (by far the best impact drivers). I can't see throwing those out.
I’ve been using Malco for the past 3 years.
Malco bit, have one in my back pocket rn
The Klein magnet breaks after 4 to 5 months of daily use. Wonder how these will fare.
Can we say Malco? I have the Malco ones in my bag for years, now. But it's nice that Milwaukee is catching up 😂
Ya been using Malco for quite a while. Not sure I’ve seen a 3/8” though.
does 1/4 socket shank fit with milwaukee multi socket driver?
Nice. No ads! Cool!
Been there and done that with the metal shavings in the nut drivers
I would have to try this for sure.
Thanks, Vince! I love the tool and gadget demos. Bring back the DWAMY!!!! 😂 🕺
🤣👍🏻
Would be even nicer if they made a quick release that lets a collar slide a bigger size down over a smaller size. It would just need to be an internal and external hex on the smaller size then the bigger size is same size as the external hex.
I just finished a job using hex head structural screws and I had the problem of the nut setter filling up with metal shavings. Frustrating.
Good video Vince, I'll have to give them a try
Would like to see a 6 inch shaft option.
I prefer dewalts reversible clean off tips they give u a 5/16 1/4 head and a 3/8 7/16 no repeats like this one and I’m a Milwaukee guy lol
Hasn't dewalt had that forbyears? Hard to find, but I've had one.
Nobody tell Vinnie that Malco and Klein have been doing this for years. Let him think Milwaukee "solved" the problem 😂
I just put the pointed end of my fastener in the nut driver and hit the trigger to clean it out. 😂
gotta look for these.
New, never seen innovate tool, a Klein magnetic socket shank with magnet. The most advance technology.
I just wanted to let you know there was an ad using your face for a free giveaway of milwaukee tools. For men born from 1981 and 1982
Use compressed air to blow the junk off your magnet
just buy the malco bits they are better, and on top of that before i had the malcos i would roll a ball of butyl gasket, get it somewhat dirty and stick that into the bit repeatedly and it cleaned it well
DeWalt has had them for a couple years now
Milwaukee has too. They’re not super new but they are useful.
Can someone explain how its called a nut setter when your fixing a screw not a nut?
It took them long enough Klein has been doing that for 4 years almost 5...
Thanks Vin! 💪🤓👍
so the shavings cant be blown out with air?
Klein has those as well just like Malco
What is that bit holder?
Milwaukee Drill Bit Improvements You Must've Missed!
ruclips.net/video/efASylNd9Ew/видео.html
Doesn't Klein have something like that already?
These have been out way before milwaukee thought about it
Love my Klein ones
This is real Nice-like.
I thought everyone knew to use an air compressor to blow out the nut driver debris, it couldn't be any easier literally takes less than a second and good as new, now go grab your nut drivers back out of the trash.
nice review!!
lol all love but this could’ve been a 30 sec video
I bought Dewalts 5 years ago.
Very nice, thank you 👏🇨🇦
You bet!
Sounds like you forgot if your dentine fix 😂😂😂
But what you are missing is the flip drivers magnets wear out quickly and they don't fit the malco screws well and you get cam out there too
I bought these nut setters at home Depot before they had them on the pegs yet. But haven't used them yet the fitment is loose and are a bit girthy compared to malcos so they are on the back up for me.
And would have loved these when I was a cable installer but not even malco was making them then.
I loooovvvve it
That is nice!
Vince is looking ripped these days!
This is awesome, but dude, post your meal prep and workout plan! 😂
It's called being 5'4 and not fast food for lunch everyday.
I hate shaving my nutsetter!😂
New driver set starts at 5:00
That 3/8 should have had 1/2 on the other side
I’d rather take the 3 minutes and use duct seal to clean my magnets instead of losing the heads of my bits everyday
Klien been had this.
Milwaukee did not invent that tool I’ve been using those for years. I do believe they were first invented by Klein I’ve been using them for almost 10 years
Looks like a solution to a problem that did not exist.
Milwaukee late to the game lol, these have been a thing for years now 😂
What I do to offset that issue.. I keep a pack of gum with me 😎😉.. if it becomes a problem, I chew a gum real quick and clean it out by pressing gum into it
get a piece of tape, put it in the bit and give a trigger pull, problem solved.
?
Yep malco I have used for years and will continue to use them ,it's a copycat with Milwaukee on it !
Tressa Circle
55205 Dedrick Fork
I use the dewalt
FYI the scam add on RUclips is still using image
I think it’s not a new solution. Check your comments about Malco.
Bubblegum gasket pulls shavings right out.
gret video bro from bd
This is just like apple saying look what we invented even though somebody else has had it for years Milwaukee didn't come up with the idea they just copied somebody else
So basically …yes
Alvena Row
I’m an hvac guy and this is pointless, malco or nothing, I just take them off the bit to clean them, one wipe with my shirt good to go