Parkside HVLP Paint Spray Gun PFS 450 B1 TESTING

Поделиться
HTML-код
  • Опубликовано: 16 янв 2025

Комментарии • 20

  • @monicavoinea2192
    @monicavoinea2192 11 месяцев назад +2

    Thank you for the tutorial! Just bought one, and your video helped a lot! 🙏🏻

  • @CoolestUserEver
    @CoolestUserEver 10 месяцев назад +3

    Nice test of the new model. I have the old model (A1) but I lost the nozzles so I just got that one.
    For those unsure about buying one of these, the hardest part is figuring out your paint dilution. Otherwise, for larger areas, it's better than a roll. It leaves no streaks and a few back and forth can cover the surface evenly if you pay attention (about 1/2 or 1/3 overlap).
    People might say rollers are best but they need to keep in mind that an expensive roller will be better but cost as much or more than the machine and you have to use expensive paint. This machine is for DIY people at home so it's better than a cheap roller and can do nice things with cheap paints.
    It's also easier to clean. Just some hot water and a rag and some very diluted hand soap for the bits that dried and it's clean like new.

  • @JPWrightVoiceActor
    @JPWrightVoiceActor 8 месяцев назад +4

    You have the voice and accent of a Ryanair flight attendant trying to sell tickets 🤣 Very informative video though !

  • @slammerreal
    @slammerreal 4 месяца назад +1

    Can it be used for car paint ?

  • @grahampritchard5284
    @grahampritchard5284 20 дней назад +1

    Paint application technique is not in a rocking movement as demonstrated, but keep the wrist stiff then move the arm in an even movement keeping an even distance at all points of the application.

  • @basketballmaven1454
    @basketballmaven1454 Год назад +1

    what tip did you use to spray the wall?

    • @TechGuruAndrew
      @TechGuruAndrew  11 месяцев назад +3

      water based paint tip you can see the color.

  • @AlanKaruzo
    @AlanKaruzo 9 месяцев назад

    Can it be used for painting with nitrocellulose paint?

  • @thecyborg6718
    @thecyborg6718 9 месяцев назад +2

    Wtf 70 DIN/sec ? Those idiots who make it can't give us the maximum seconds for the viscosity cup?

  • @ΜΑΘΙΟΣΜΑΘΙΟΣ
    @ΜΑΘΙΟΣΜΑΘΙΟΣ 11 месяцев назад +2

    Αδερφέ ,μια χαρά τα είπες...αν και θα μπορούσες να τα πεις στα ελληνικά..τσπ. Αυτό που δεν κατάλαβα ήταν ο υπολογισμός ..δλδ ; και αν είναι χρώμα λαδιού,πως το καθαρίζεις μετά ..; πάντως ευχαριστώ για το βίντεο,δεν πολύ χρειάζεται να διαβάσω το εγχειρίδιο...Keep going

    • @TechGuruAndrew
      @TechGuruAndrew  11 месяцев назад +1

      δεσ το λιγο στο manual ειχα αναφορα για καθε τυπου χρωμα,

  • @nukaataavar
    @nukaataavar 7 месяцев назад

    bmw tomorrow

  • @sotohilti
    @sotohilti Год назад +5

    i think its waste of money and pain in the ass to clean it. The old traditional way is better

    • @steveday4797
      @steveday4797 11 месяцев назад +4

      Got to be honest, I've picked mine up for £22 so even if I used it all day to spray my kitchen, toilet then bathroom, it's worth it

    • @dannibck3408
      @dannibck3408 11 месяцев назад +8

      I have one and think that it's easier to clean than a roller.

    • @Zanderman2000
      @Zanderman2000 9 месяцев назад +4

      I have both, rollers brushes and this spraypaint. When I bought it I imagined it can be used outdoor aplications and for furniture for example. With water diluted colors it is easy to clean up. For thinners it could be messy and should be done somewhere when your wife cant see. But I have to admit to the op that I once started spraying boat and ended up using roller because the airhose spraygun only wasted lot of paint. With a roller it was only easy sweep and it was DONE.

    • @ludinaucnik6158
      @ludinaucnik6158 Месяц назад

      Pain in ass to clean??? 2 minutes job for god sake

  • @Slaff-d3v
    @Slaff-d3v 9 месяцев назад

    С ума сойти можно пока покрасишь