Namaskar aapane bahut acchi tarah se simple work mein bataya main aapka बहुत-बहुत dhanyvad karta hun aapke samjhane ka bahut maja aaya vah aise hi samjhana chahie dhanyvad
Why you use resistor in panel side in zone 4? In zone 1,2&3 we use eol resistor to bypass theses zones as we are not working with these zones. But in zone 4 also you use eol resistor in panel. Because of this resistor it must always show healthy. But it is working as detector activates. Please explain.
@@technicalmasternadimji9008 but if you put resistance inside panel zone 4,, when you remove or in case fault detector if not wire damage, panel did not show zone fault so you should put resistance only end of line. Is it right? If you put resistance in the panel resistance value 2.3 k so it will show zone 4 fault
Dear, in smoke detecter or fire panel circuit model is made for serise conection so the end of smoke detecter require circuit complit , resistance fitting is complete the circuit. 👍🙏🤲
smoke detector par checking ke liye smoke apply kiya or detector ki red led light jo normelly blinking hoti he vo bhi continuasely on ho gae par bhir bhi agar panel me fire ka koi signal nahi aata or na hi huter bajata he to kya kare
1 smoke detecter me wassa hotta he ya sab me.ager 1he smoke detecter me wasa hota he to detecter change.nahito connection galat hoga.panel me vi kharabi ya connection change hoga ji.
@@technicalmasternadimji9008 aapke video me jo panel he vahi panel pehlesehi laga he...4 zone ka 2 zone me detector lage he...1 zone ok work karta he ..dusre zone me jo 7 detector lage he un sab me esa hota he smoke karne par red light continues on ho jati he par panel me signal nahi aata ...ham har mahine chech karte he abhitak ok tha is mahine hi problem aaya he
Namaskar aapane bahut acchi tarah se simple work mein bataya main aapka बहुत-बहुत dhanyvad karta hun aapke samjhane ka bahut maja aaya vah aise hi samjhana chahie dhanyvad
🤝🤲
Very nice and simple explained by you sir. 🙏 Thanks for demonstration of every devices
🤝 for me🤲
What’s a explanation step by step 👍 anyone can understand easily 💯
Waiting for next video
Good job sir
Adresssebale fire alarm system ka bhi video banay
Ok moka milega to video banunga inssallha
Thank you so much❤❤❤❤❤❤❤❤Great video🎉🎉🎉🎉🎉
Bahut hi achha explanation hai Esa koi video mai nahi batata hai very good explanation ❤️❤️❤️❤️
Walekumassalam bahut acha tutorial hai aapka and best way to teaching....
🤝🤲
Sir apka video bahut achha laga hai sir
So good explanation!! Anybody can understand easily.
Nice explanation
Very nice video, nicely explained, thank you very much.
🙏🤝🤲
Very helpful video, appreciate ur effort sir 👏👏👏
Best explained...🙏tq So much Sir❤
🤝🤲
Bahut achhi vedio banai aapne..dil khush ho gaya
🤝🤲
Bahut achcha sir samjhaya
👏👏👏
🤝🤲
🙏 Thanks sir helpful video 🙏🙏🙏
Very good sir bahut achha video h apka
Ok thanks sir. assalamu alekum
اسلام علیکم ورحمة الله وبركاته بہت زبردست جناب
🤝🤲
@@technicalmasternadimji9008 sir price dedo 8511002140
Very good
🤝🤲
Apne bahut behtar see shikhaya thanks
Assalamu alekum 🤝 🤲
Beautiful 😍
🤝🤲
Very help full but ek Question hai agar last smoke detector pe register na lagaye to kya hoga plzzz answer
Koe vi on nahi hoga
Clear explanation sir, thank you
Thanks 🤝🤲
Nice
🤝🤲
Thanks bai
Osm sir
🤝🤲
Very good sir ji 🙏
🤝🤲
Very good explanation.....
Assalamu alekum 🤝 🤲 ♥
Too much good explain
Acha video laga
Good job
Iske sath control module and monitor model kaise canection karta hai please video banaye
Uska dusra models
@@technicalmasternadimji9008 ha to uski
Assalam wa alaikum bhai....Main is field main naya hoon....Aur yeh kaam muje sikhna hai too kaha se shurvat karna padega.... Please help
Bahut shukriya Sir
Nice sir ji thank you❤❤
🤝🤲
So good explanation
🤲 for me
Thank you
Assalamu alekum 🤝 🤲
Sukriya bhai jaan
Thanks.bro mere pas Scholl kaa Kam aya hai to kese bhv du
Good information
🤝🤲 make duaa for me.
How much smoke detector conect in 4 th channel , ( please reply ) in parelal conection in different different Company smoke detector
4×7
Assalamalikum agar sir sub thik hai panal me prblm hai like ic ya other parts toh kaise repair kare ya pura panel new kharid kar lana padega
Thank you sir
Why you use resistor in panel side in zone 4? In zone 1,2&3 we use eol resistor to bypass theses zones as we are not working with these zones. But in zone 4 also you use eol resistor in panel. Because of this resistor it must always show healthy. But it is working as detector activates. Please explain.
Circuit complit use on when applying the resistance. @👍🤲
@@technicalmasternadimji9008 but if you put resistance inside panel zone 4,, when you remove or in case fault detector if not wire damage, panel did not show zone fault so you should put resistance only end of line. Is it right? If you put resistance in the panel resistance value 2.3 k so it will show zone 4 fault
👌👌👌👌👌
🤝🤲
Sir 24 volt plastic hooter ko 24 volt power supply. Pa chala sakte hai direct
Yes 24volt me direct chalata he.or 12volt me vi chaltahe.
Sir pastic hooter kitna watt ka aata ha
One question sir jab check krte time alarm on hoga to water supply to on nhi ho jaygi
Very good.
🤝🤲
Assalamu alaikum Bhai
mehnat aapne bahut kiya bhai
lekin basic chij batana bhul gaye
ye panel conventional hai
wiring class B hai
Ok vae ..assalamu alekum. 🤲
@@technicalmasternadimji9008
walaikum assalam
But for beginners it's very simple schematic way to understand the whole concept....
Dear, Why we install the resistance in end of fire smoke detector and fire panel?
Dear, in smoke detecter or fire panel circuit model is made for serise conection so the end of smoke detecter require circuit complit , resistance fitting is complete the circuit. 👍🙏🤲
Thankyou dear
I have one question about to my office fire panel.
If smoke detector has faulty then hoe to know that smoke detector is faulty?
Pls reply
In agarbti smoke is tuch the smoke detecter then it alarm then that is ok 👍 otherwise two led is in 10 sec one time glowing this is ok working.
Sir ji sem addresebal fire alarm systems video send please request to you
Super sir
😁👍🤲
Awesome sir
Sir 1 cable mai do hooter laga sakte hai please sir btayi
Sir ji
Are bhai transformer ka input output batao
Praemery me ac input secondary me output
Sir is the hooter also connect in series or are each hooter connected separately to the control panel.
Sir series me karte chale jayenge to kam nahi karega ky? Smoke detector
smoke detector par checking ke liye smoke apply kiya or detector ki red led light jo normelly blinking hoti he vo bhi continuasely on ho gae par bhir bhi agar panel me fire ka koi signal nahi aata or na hi huter bajata he to kya kare
1 smoke detecter me wassa hotta he ya sab me.ager 1he smoke detecter me wasa hota he to detecter change.nahito connection galat hoga.panel me vi kharabi ya connection change hoga ji.
@@technicalmasternadimji9008 aapke video me jo panel he vahi panel pehlesehi laga he...4 zone ka 2 zone me detector lage he...1 zone ok work karta he ..dusre zone me jo 7 detector lage he un sab me esa hota he smoke karne par red light continues on ho jati he par panel me signal nahi aata ...ham har mahine chech karte he abhitak ok tha is mahine hi problem aaya he
9937112341
Please call me
Hooter fault and zone ckt fault and commen fault aa rha hai aap bta skte ho kya sir ji
Sir 2 zone agni fire alarm video
Thanku sir
👍🤲
Sir ji isme bettery lagaana jaruri hai,?
Yes jab fire 🔥 hota to line ac current chala jata he.
Sir 1 zone me kitne Detector lga sakte h
15 no of minimum DETECTOR laga sakte he,1zone me. Sorry I am late.
Sir panel me jo relay hai o kab on off hote hai ?
Alarm, hutter, baj ne ka time. Assalamu alekum
@@technicalmasternadimji9008 Alekum Salam bhaiJan, thanks for reply
Bhai jaan ek hi loop me 2 bell ho to uska connection kaise hoga
Parallel
Thank you
fire control panel minimum and maximum kitne zone ka aata hai jaise ki 4ch 8ch 16ch 32ch DVR
The maximum number of devices that can be fitted in one zone?
20
But used wire 1.5mm or avo
25-30
@@technicalmasternadimji9008 agar kam rahe toh wire konsa use karna sir
Prices bhi bata dena sir
Muje wholesale me chahiye bhai Mera shop hai AM tech secretly salutations
Sir how many hooter can be connected in one loop . Is it only one.
Two or three or 4,5
You are too slow, with spelling mistakes.. "Wiring"
Yes
Sir ak zone me kitne detector lga sakta hu
15
15
Kya kharch ata he ise kharidne me
Hello sir main Bank me Kaam Marta hu Jo ki Security alarm and Fire alarm ka kaam hai Hame Security alarm ki Full jankari chahiye ...
Aur ek video safe pro fire alarn system panel par banaiye na
Sir last detector mai resistance q laga hota hai ??
Circuit complit ke liye jarure he.
Circuit complit ke liye jaruri he ji.resistance
technical master Nadim ji thankew sir
Sir ji installation charge kya hoga 2024
App jo le sakte ho
smoke detector ok ho fir bhi koi 1 zone me signal na aaye to kya kare
Uski wire line chek kare
Sir apne battery 🔋 12 volt 7AH bola ????
Yes or 7.5ah
technical master Nadim ji shukriya sir 🙏
Kisi ko bhi jankari hai to piliz coll me sport kijiye
jankari chahiye can call u
Yes
@@technicalmasternadimji9008 your mobile no.?
Sir ji aapka contact number send karo please
Nice
🤝🤲
Very Good
Thank you sir
Good job
🤝🤲
Nice
Nice