You're a genius! Making something like this compact enough too look like a pistol, while simultaneously giving it full functionality is what makes this build so difficult. You just got a new sub.
this is easily the most complex yet most compact mechanism i've ever seen made out of legos. the mechanism and design behind that mag alone earned u my sub
I love how smart this is, uses a relatively low amount of pieces, looks nice, is relatively simple. I also love how unique it is, especially how you made the center rail for the slide.
Very great design! But the part that the shell slides on is a little bendie, if you use a little bit stiffer rubbers itt might jump out of place. If you reinforce it 1 piece instead of 2 it becomes much stronger and it solves the porblem.
bro fr the quiet kid has a AK47 or Glock19 no but 🍑 quiet kid not big brain🧠 like the grade 5 or the lego class kids or scholar that R bored and k Lego
@@MXSVIC Jack frost has come to lend a hand! Hee-Ho! But the way to get these is most likely the official Lego website, they sell just about any kinda of lego piece.
I like this gun. Not only it is a famous handgun, it is reliable and the mobility reloading plus the small weight just makes it awesome. I built this and at first it is trash but then I improved it and it works perfectly fine! Thanks man for the tutorial. I don't have enough pieces but I use other similar ones to make it cool. I also added some attachments too. Thanks for your tutorial once again.
Works very flawlessly i didnt have some pieces and since i have 3 years of playing with legos i was able to make my own mods to it so i could have it work for my size, note if you dont have the top piece the small thing just use the bigger version of that because thats what i did. it is a little big then but still better than nothing. Very good tho.
Very cool.. I will advise that rubber band selection is vital to the accurate function of this item.. My bands were a bit too big, so I had to get creative in how I attached them.. I replaced the front ball-pins with standard grey pins, routed the bands around these and hooked them over a single ball-pin on the underside just forward of the trigger guard (in the grey T-shaped piece to the right-hand side). I also found that by twisting the bands a few times they stay together, and this reduces the chance of them flexing into the barrel and obstructing the projectile.. I moved the hook point for the slide return rubber (first band installed in the video), to the outside of the slide, I put a tan 3/4 pin in the hole in the slide plate directly above the forward trigger cog, this gets the band out of the way (off the yellow half bush) of the action of the firing pin. I also (after breaking the double looped bands of the firing pin) reduced the firing pin to one band, looping it around a single stud tube piece - replaced from the grey bush in the video.. The single band gives better barrel exit speed, and it actually hurts to shoot one's hand in front of the barrel.. it also travels a good 30 feet! This thing could take out an eye now..!
Hi, really like the design of your gun, the trigger mechanism is very good. Unfortunately I had some trouble with making the gun shoot. I did everything the instruction said and the gun jammed. Turned out that I had put the firing bands in the wrong position. I really like the mag release though sometimes the mag just pops out when loaded. Speaking of the magazine, I like the way that you load the it because you don’t have to push Down the bullets, you can just drop them in. I also had to replace the shooter piece with a 1x1 technic beam because the 1x1 axel piece got stuck on the bullet. I love the way the tutorial is set out, it seems really clear on where to put the pieces. I found it slightly harder to fit the rubber bands as is do not have a small stick.
Just a helpful reminder: 1. When the rubber bands are added knowing their size is very confusing and can lead to problems. 2. I noticed the slide seemed to curve up when rubber bands are added, to fix i just used a 4L Axel with stopper at end and put the through the center of the modified 1x3 beam then added a 2L bean with one hole being an axel and other being a circle for pin. Then that put a restraint on the slide to keep it from bulging. 3. I would keep in mind that it seemed very fast paced in the video when showing the parts needed for a step, I get the video shouldn’t be long but at least give us time to pause the video and find the pieces that we need. On a good note this video uses fairly common pieces except for maybe the panels. P.s. Most pieces and sub assemvelies can be made using other pieces with the same amount or better strength. Just remember this is your gun use your imagination with what parts you have! 👋👋😊
could you make a more in depth video of the slide mod thing? if you haven’t scrapped the gun yet, or you could just rebuild that mod and i’ll try to figure it out myself.
This Is so insane, i did Build it and yeah the shooting mechanism can still be improved but designing this Kind of mechanism must have been very difficult already. So thanks a lot for sharing
how do you come up with these working designs? do you do it on a computer and it lets you know what lego pieces you need, or is it just trial and error? either way it is so awesome. great job and i hope u keep up the great work
This glock works but the build structure is fragile & also requires specific tension of the rubber bands to make it work. Thanks Alexander P for the parts list
I saw this and immediately broke down laughing just repeating the phrase “of course this exists” for like 1 minute straight. Now I’m just watching this and enjoying the construction process.
Although I don't like gun, I found it very interesting to build it following your video. As such, I spent the whole afternoon and built this gun using Bricklink Studio 2.0 so that I can share the build instruction and parts list with friends.
I made the predecessor to this, it functions the exact same, I've modded it myself (longer barrel for accuracy, extended mag, etc) it's just not as visbly appealing
Woulda been nice to get an idea of what pieces and how many I would need, cause I don't have four of those panels used about 9-10 mins in, i only have two besides the ones that are already in a build
No just imagine the bullets are modified to be spiky but also not shoot very far so they just drop to the ground, then the robber thinks it’s not a big deal, but then he *steps on the legos*
Maybe add what type of piece it is next time, if you don’t know, ask someone who knows a bit about lego or search it up, but anyways it is a GREAT gun! Well done 👍
The magazine mechanism was brilliant! I think changing the magazine without emptying it is not possible this way, but this is compact and actually a really smart way. Well done man
Although completely against Lego policy (and thus they will not be happy that you used their brand name in the title of your video), it's a great build with elegant solutions without compromising on structural integrity. Well done.
i tried doing this tutorial before but i messed it up and i destroyed it but i still had the handle and magazine for it so i made my own version of that lego gun.
if you improved the size of the pieces that you use for the rubber bands, you could increase the number of them or put thicker rubber bands. but the gun still works fine. good job.
![Minecraft but Players Can Upgrade [FULL MOVIE]](http://i.ytimg.com/vi/QRRgLJs4ZPk/mqdefault.jpg)
The best way to sneak Lego into a American high school
haha damn
😭
Fuck you u made me laugh
@@Rootgm08 r/technicalythetruth
Hahahha
Parts list:
22x 3M blue pins
1x 3M beige pin
10x 1.5M beige pin
2x 3M axle pin with 2M pin
16x 2M black pins
1x blue axle pin
2x beige axle pin
2x 1M axle with ball joint
3x 1M beam with pin (3:57)
1x 9M beam
3x 7M beam
4x 5M beam
5x 3M light grey pin with perpendicular hole (6:33 top)
3x 15M beam
6x 11M beam
5x 3M beam with cross axle
1x 2M beam with cross axle
2x 2M beam with axle hole
4x 2M axle
5x 3M axle
2x 4M axle with stop
2x 5M axle
4x 4x2 L beam
3x 3M pin with stop bush
3x 3M beam with axle hole on top (10:46)
1x 3M beam
4x 1M bushing
6x 0.5M bushing
2x 8 tooth gears
1x 4x6 angular beam (4:37)
2x axle joiner with perpendicular hole (6:48 bottom right)
2x pin joiner (7:26)
1x axle-pin T connector (7:02 top right)
4x 3x11 Technic plate (8:24)
4x 5M thin beam with axle holes at ends (8:55)
2x 7M thin beam
Magazine:
3x 3M blue pins
1x 3M beige pin
4x 2M black pins
1x 3M axle pin with 2M pin (11:58)
8x 3M beam with cross axle (11:11)
3x 2M beam with cross axle (11:28)
3x 11M beam
1x 3M beam
1x 5M axle
1x 4M axle
1x 3M axle
1x 2M axle
1x 10M axle
2x 4M axle with stop
2x 2M beam with axle hole (11:28)
3x 1M bushing
1x 0.5M bushing
1x 2M cross block with axle hole (13:44)
Setup:
3M beam
1M bushing
3M beams for ammo
4 large elastics
1 medium elastic
1 small elastic
Thanks!!!!!!!!!!!
Legend
Amazing thank you
I love people like you.
My wallet is going in the drain after this
Bully: makes fun of kid for playing with Legos.
Kid the next day:
Lol I love it!!
Surrender like the French did
knew there would be at least ONE comment like this
@@blackblade6540 Hahahahaha
It is Lego there is no S
You're a genius!
Making something like this compact enough too look like a pistol, while simultaneously giving it full functionality is what makes this build so difficult. You just got a new sub.
You can tell that he used a lot from Still thinking's lego pistol but i must say he did make it look way better
same
But Idk which to get the pieces for. Which one you think?
same
it's easier to make than u think, i've made this 1 alot but i could never figure out how to add a mag and that was like 2 3 years ago when i was 12
When you don't have enough pieces ;-;
When you don’t have the right pieces ;-;
@@nogozoo2582 so u dont have enough pieces
@@suspatukka5447 I don't have enough of the RIGHT peices
@@nogozoo2582 so u dont have enough pieces
@@suspatukka5447 yeh sure
For personal reasons, I will be saving this on one of my playlists
this is easily the most complex yet most compact mechanism i've ever seen made out of legos. the mechanism and design behind that mag alone earned u my sub
tbh the mag release is probably the most easy part on this build.
22:37 imagine hearing that sound out a Lego building competition (that would be terrifying)
*_satisfying_*
AND WHEN YOU SEE IT IT’S A .50 CAL LEGO BUILD THAT PENETRATES 100MM STEEL PLAE
Sounds badass
imagine hearing 00:13
"I've had enough" *pulls lego glock out of bag*
Wonderful and yeah I don't have enough pieces but worth a sub!
init
What?
Same
Juice Wrld Is an awesome artist, one of my favorite!
@@eskendyrackbar1710 100%!
Like 90%of those pieces are in my robotics class... Guess what I'm going to do
maybe: buy the missing 10%?
And finish what that teacher started?
Ha, like I have the bajillion dollars that would cost. thanks for the reply tho.
@@GameKnight404 ?
💀💀💀💀💀💀💀💀my robotics teacher dosent let me
that edit with the pieces falling apart was so perfect
not your pfp
@@MarkThArc not you're either
I love how smart this is, uses a relatively low amount of pieces, looks nice, is relatively simple. I also love how unique it is, especially how you made the center rail for the slide.
Now I wish I hadn’t gotten rid of all my LEGO’s when I was younger
It looks like you can even do a tactical reload with this. Nice job!
By far the coolest thing I've seen made from Lego!
Can you please do an inventory of the pieces that you need for this. It would be really appreciated.
@Jack Wood i definitely agree, a lego list would be great
I agree
Please do this.
yes please that would be very helpful
Yeah do that please
I robbed McDonalds with this...
How much did ya get?
Very great design!
But the part that the shell slides on is a little bendie, if you use a little bit stiffer rubbers itt might jump out of place.
If you reinforce it 1 piece instead of 2 it becomes much stronger and it solves the porblem.
Finally, an instructions video where it isn't reversed
Ideal build speed + nicely selected background music. You don't often see this :)
The first time anyone has made instructions that are actually easy to follow and have a great mech
when you're on a field trip to Denmark but the quiet kid asks to go to the washroom
the brains in some peoples heads……amazing.
Not me
@@putin8909cheers mate I’ll drink to that 🍻 I ain’t got a brain worth nothing in this empty head lol
Been doing LEGO for years, and I still can learn a thing or two, thanks man
Funny thing is that the cocking of the gun is basically a perfect replica of the actual gun, minus the shell ejection hole, its very clever!
This is absolutely incredible. Could you update the description with a list of all the parts needed? Thanks!
yes i would like if you could add the peaces needed shown pls it is a great gun but it would be better if you could add them pls thanks
Parts list:
22x 3M blue pins
1x 3M beige pin
10x 1.5M beige pin
2x 3M axle pin with 2M pin
16x 2M black pins
1x blue axle pin
2x beige axle pin
2x 1M axle with ball joint
3x 1M beam with pin (3:57)
1x 9M beam
3x 7M beam
4x 5M beam
5x 3M light grey pin with perpendicular hole (6:33 top)
3x 15M beam
4x 11M beam
5x 3M beam with cross axle
1x 2M beam with cross axle
1x 2M beam with axle hole
4x 2M axle
4x 3M axle
2x 4M axle with stop
2x 5M axle
4x 4x2 L beam
3x 3M pin with stop bush
3x 3M beam with axle hole on top (10:46)
1x 3M beam
4x 1M bushing
6x 0.5M bushing
2x 8 tooth gears
1x 4x6 angular beam (4:37)
2x axle joiner with perpendicular hole (6:48 bottom right)
2x pin joiner (7:26)
1x axle-pin T connector (7:02 top right)
4x 3x11 Technic plate (8:24)
4x 5M thin beam with axle holes at ends (8:55)
2x 7M thin beam
Magazine:
3x 3M blue pins
1x 3M beige pin
4x 2M black pins
1x 3M axle pin with 2M pin (11:58)
8x 3M beam with cross axle (11:11)
3x 2M beam with cross axle (11:28)
3x 11M beam
1x 3M beam
1x 5M axle
1x 4M axle
1x 3M axle
1x 2M axle
1x 10M axle
2x 4M axle with stop
2x 2M beam with axle hole (11:28)
3x 1M bushing
1x 0.5M bushing
1x 2M cross block with axle hole (13:44)
@@quelldieu7263 you're incredible
This is what the quiet kid has in his back pack in preschool
lol
bro fr the quiet kid has a AK47 or Glock19 no but 🍑 quiet kid not big brain🧠 like the grade 5 or the lego class kids or scholar that R bored and k Lego
I actually managed to build this! thx
Where’d you get the rubber bands?
@@bfsproductionsytp buy one
@@MXSVIC Jack frost has come to lend a hand! Hee-Ho! But the way to get these is most likely the official Lego website, they sell just about any kinda of lego piece.
o shit sans has a gun!!!
What type of Lego is it
I like this gun. Not only it is a famous handgun, it is reliable and the mobility reloading plus the small weight just makes it awesome. I built this and at first it is trash but then I improved it and it works perfectly fine! Thanks man for the tutorial. I don't have enough pieces but I use other similar ones to make it cool. I also added some attachments too. Thanks for your tutorial once again.
Very nice work👍 Thank you for this build!
Lego ideas is going to have a field day with this submission
Thank you ☺️ it’s always nice when I get help for school projects.
This is so cool, the second I have the materials for this I’m instantly building this
Works very flawlessly i didnt have some pieces and since i have 3 years of playing with legos i was able to make my own mods to it so i could have it work for my size, note if you dont have the top piece the small thing just use the bigger version of that because thats what i did. it is a little big then but still better than nothing. Very good tho.
Very cool..
I will advise that rubber band selection is vital to the accurate function of this item..
My bands were a bit too big, so I had to get creative in how I attached them.. I replaced the front ball-pins with standard grey pins, routed the bands around these and hooked them over a single ball-pin on the underside just forward of the trigger guard (in the grey T-shaped piece to the right-hand side).
I also found that by twisting the bands a few times they stay together, and this reduces the chance of them flexing into the barrel and obstructing the projectile..
I moved the hook point for the slide return rubber (first band installed in the video), to the outside of the slide, I put a tan 3/4 pin in the hole in the slide plate directly above the forward trigger cog, this gets the band out of the way (off the yellow half bush) of the action of the firing pin.
I also (after breaking the double looped bands of the firing pin) reduced the firing pin to one band, looping it around a single stud tube piece - replaced from the grey bush in the video..
The single band gives better barrel exit speed, and it actually hurts to shoot one's hand in front of the barrel.. it also travels a good 30 feet!
This thing could take out an eye now..!
hey ive also been having these issues, do you think you could post a short video showing what youve done to it?
Bro wrote the terms and conditions lol
Thank you so much, you’re the only person to show instructions!
Now this is real firearms.
Parents: "how are you ever going to make money playing with Lego?"
Person with this build: *"GIMME YOUR MONEY!"*
Funny
Shoots harder than I thought.
Amazing creation!
How you made it compact and functional was just genius. However I think that pin spacers could be used a little XD
Hi, really like the design of your gun, the trigger mechanism is very good. Unfortunately I had some trouble with making the gun shoot. I did everything the instruction said and the gun jammed. Turned out that I had put the firing bands in the wrong position. I really like the mag release though sometimes the mag just pops out when loaded. Speaking of the magazine, I like the way that you load the it because you don’t have to push Down the bullets, you can just drop them in. I also had to replace the shooter piece with a 1x1 technic beam because the 1x1 axel piece got stuck on the bullet. I love the way the tutorial is set out, it seems really clear on where to put the pieces. I found it slightly harder to fit the rubber bands as is do not have a small stick.
same dude i really cant follow all of it but its really fun to figure it out how a gun works , anyways thanks to the creater
Just a helpful reminder: 1. When the rubber bands are added knowing their size is very confusing and can lead to problems. 2. I noticed the slide seemed to curve up when rubber bands are added, to fix i just used a 4L Axel with stopper at end and put the through the center of the modified 1x3 beam then added a 2L bean with one hole being an axel and other being a circle for pin. Then that put a restraint on the slide to keep it from bulging. 3. I would keep in mind that it seemed very fast paced in the video when showing the parts needed for a step, I get the video shouldn’t be long but at least give us time to pause the video and find the pieces that we need. On a good note this video uses fairly common pieces except for maybe the panels. P.s. Most pieces and sub assemvelies can be made using other pieces with the same amount or better strength. Just remember this is your gun use your imagination with what parts you have! 👋👋😊
could you make a more in depth video of the slide mod thing? if you haven’t scrapped the gun yet, or you could just rebuild that mod and i’ll try to figure it out myself.
@@Ello69420 sure I’ll put a video on my channel
oh ye also, do you have a slide lock too?
one of the problems i have is that the rubberband which shoots the bullet keeps falling off from the yellow little thing
@@Ello69420 no slide lock but I’ve been tinkering with that system so maybe i might make on
The music is has a catchy melody ngl, awesome work with your glock 😄👍🏽
This Is so insane, i did Build it and yeah the shooting mechanism can still be improved but designing this Kind of mechanism must have been very difficult already. So thanks a lot for sharing
Can u help me with the pices i dont really know where to buy them
I love the design!
I would really like to see a video on how to make the AAC honey badger (if possible)
That’s prob 1k usd worth of legos lol
how do you come up with these working designs? do you do it on a computer and it lets you know what lego pieces you need, or is it just trial and error? either way it is so awesome. great job and i hope u keep up the great work
The best pistol that I ever seen out of lego !
LEGO: "We feed creativity!"
This guy: *Makes a functioning gun*
LEGO: "Did I stutter?"
This should be turned into an actual lego book.
i like how your names agent 7 and you watch this vid
Let's go ! I'll try to build, even if I'm not sure if I have enough pieces 😆
I would actually buy a LEGO Technic Glock. Good for understanding the basic principles of operating a firearm.
I'm a 34 year old man. I ordered all these pieces off webrick just to build this. Soo cool
This glock works but the build structure is fragile & also requires specific tension of the rubber bands to make it work. Thanks Alexander P for the parts list
What r the parts can you list um please
@@raiden_nlarts1934the quoted google link was provided by a good person who gave comments here ealier.
3 stands wide! Good job ....SUBSCRIBE
It’s studs by the way
Amazing desinne functions well but I did have to extend the mag but over all well done been tryna make something like this for a while thanks a bunch
I saw this and immediately broke down laughing just repeating the phrase “of course this exists” for like 1 minute straight. Now I’m just watching this and enjoying the construction process.
Nice gun! Very cool! Great work.
me: eat my studs bang bang
mom: put your lego pistol away at the table
I like how the usual overlap with these Legos are people who like making cars and then there's the Lego and gun overlap demographic
I love this design, its so much better than the last pistol i built!
"Lego Gun, Pistol, Glock that shoots. "
Oh this is quite intreres-
*"INSTRUCTIONS"*
Ferb, i know what I'M doing today.
yeah now all i need is a list of parts
This was in my recommended.. that sums u what kind of person I am
The moment you realize you don’t have enough prices :(
Just awesome, you should work with Lego on their projects 😁👍
when your halfway into it then you realize you dont have enough pieces and you wasted soo much time of your life to make a lego pistol
Although I don't like gun, I found it very interesting to build it following your video. As such, I spent the whole afternoon and built this gun using Bricklink Studio 2.0 so that I can share the build instruction and parts list with friends.
Can u share it with me?
share?
So where’s it at
@@ryanking1923 someone posted a google sheets links to the list its somewhere in the comments
22:21 when billy the first grader has had enough bullying about his lego obsession
So glad I found this. Now I know what I need to protect myself at home
I made the predecessor to this, it functions the exact same, I've modded it myself (longer barrel for accuracy, extended mag, etc) it's just not as visbly appealing
Give this man a medal
A NOBEL MEDAL
that is a video i was looking for for a long long time, thank you
It's so easy, even a child could use it! And they do!
Woulda been nice to get an idea of what pieces and how many I would need, cause I don't have four of those panels used about 9-10 mins in, i only have two besides the ones that are already in a build
I would apriciate a list of parts that you need but otherwise a great chalenge to try out and great video
Thank you for sharing this instruction, slow and clear..
I love the reload and pull back mechanism
Still more reliable than a High Point.
You can say a lot about Hi-Point, but for the price they are reliable.
But imagine carrying something that heavy, bulky and ugly xD.
Imagine going to rob a guy and he whips this out
i would probably be scared i dont want a Lego piece stuck in my nose or hitting me in the eye ;A;
No just imagine the bullets are modified to be spiky but also not shoot very far so they just drop to the ground, then the robber thinks it’s not a big deal, but then he *steps on the legos*
Thank you for this video I’ve been trying to build a gun for 4 months (failed) then I found this and built it
Nice gun had some trouble setting the rubber bands up but it now works
Que lastima que la corredera no se eche hacia atrás al apretar el gatillo... Pero aún así, un trabajo muy bueno, mis felicitaciones
Maybe add what type of piece it is next time, if you don’t know, ask someone who knows a bit about lego or search it up, but anyways it is a GREAT gun! Well done 👍
docs.google.com/spreadsheets/d/1LPiKgHkIdtIbm9lnXtxqUuVJQjRjJGXuJhr8T5CAmGE/edit?usp=sharing
@@alexanderpoirier8442 Cheers 👍
@@alexanderpoirier8442 legend
great video. its done very well and it work 9/10 time i use it. only problem i have with it is that it is a bit flimsy.
Amazing, always wanted to build a Lego Thecnic that can shoot!
Hello, what tipes of rubber bands did you use??
The magazine mechanism was brilliant! I think changing the magazine without emptying it is not possible this way, but this is compact and actually a really smart way. Well done man
Although completely against Lego policy (and thus they will not be happy that you used their brand name in the title of your video), it's a great build with elegant solutions without compromising on structural integrity. Well done.
nice ! !
Great work here, reproducing a repeating crossbow on a lego gun, I like it
i tried doing this tutorial before but i messed it up and i destroyed it but i still had the handle and magazine for it so i made my own version of that lego gun.
if you improved the size of the pieces that you use for the rubber bands, you could increase the number of them or put thicker rubber bands. but the gun still works fine. good job.
Lego: “lets build children’s creativity!”
Yoshiny: GLOCK 19
Крутой пистолет. Мечтал о нём.
cool gun!
This is amazing
i had almost every singe piece but i did think that this was cool i subscribed
when he pulled out that tooth pick, you already know things just got real
works so smoothly
Very nice! A parts list would be awesome.
I can help with that :)
docs.google.com/spreadsheets/d/1LPiKgHkIdtIbm9lnXtxqUuVJQjRjJGXuJhr8T5CAmGE/edit?usp=sharing
@@alexanderpoirier8442 so u got the list?
@@mohamedageed4376 Did u get the list?
@@celtrik nope
It works!!! Thank you so much!!!
Because this is so small, the potential to modify this gun into any other gun is massive!
Lego should really make gun sets that are just like this