I like how your setup is so simple. Everyone seems to freak out about having darkroom conditions and all that. You're just keeping out of direct sunlight and everything is cool. Makes it less intimidating.
I have a video of how to make this from scratch check out this video if you want more information and yes it sits on a table or anything you want it to. ruclips.net/video/8i-LQJTR_Qk/видео.html
@@ApparelTalk Wow! Fast response and super helpful. Forwarding to my hubby. Will have him make this for me. I am super excited. You now have a Subscriber!
@@ApparelTalk another quick question. I watched the video link you provided. If you used a 24in board that holds the Quans light. What's the distance from the light to the screen? Thx!
How much height do you put on your exposure unit? I keep 24” height but I can’t burn the screens fast like you, I spend around 1’40”sec to complete with one emulsion and 2’40” to another emulsion
Here is a little hack for ya... Instead of using the manual timer and unplugging the light, get some "smart plugs" that you plug the light into. Then you can use the app for the plug or Alexa app to create a routine where the light turns on, counts down for 15 seconds, and then turns off just by you pressing the button on your phone. Or, if you use Alexa, you can make it so you say "Alexa, burn 160 mesh." I have it set up for 110, 160, 200, 230 and 305
Great video I am glad I came across it because I wanted to buy that emulsion but I did not know what light to use . What’s the distance between the glass and the light also what are the dimensions of the frame ? Thank you .
I was looking up reviews on this Quans light and found you. I had order this but didn’t like how I have to keep unplugging it. I found and extension cord with foot or hand button on Amazon for $9. Thought I’d pass this info onto you to try. It’s GE 42803 3 Outlet Extension Cord with On/Off
@@ApparelTalk no worries man. I ended up purchasing an exposure table. I did use the same setup you are using now for about a month and it worked great.
Someone wanted to know about it and the time it takes I found that 15 sec worked best for me I did put the link where to get it in the description. Hopefully people will want to watch it and make the views go up a little lol.
pukingdeserthobo if you have a lot of stuff running on that breaker circuit that can cause it as well if your not using Chromo Tech WT then that can cause it as well this light should break the time from 3 min to at least 30 sec also how far away is it from the screen
U can see around the headlights an around the suspension it's missing also the intake part it has lines so I'ma do a 3 min burn an see what happens is 1hr enough to let the emulsion dry it's dry to the touch ? Way sooner if say 30 mins
Great set up. We have a similar set up and I always say "you don't need all the fancy equipment to get the job done" I do have a question, what do you use to dry them after washing out in the booth? I place them next to a fan to dry but I'm waiting about 20-30mins for them to dry. Any suggestions to dry them quickly?
S M if your talking about the little flood lights in the back hanging. No they do not at all mess with exposing it. I have even done it at night with using with and still nothing.
One consistent question you've not helped with a definite response is the distance of the light from the screen. Please it's important as am planning on building a box. Thanks a lot.
I like how your setup is so simple. Everyone seems to freak out about having darkroom conditions and all that. You're just keeping out of direct sunlight and everything is cool.
Makes it less intimidating.
Yes in the beginning it was very very intimidating so I started playing around more to see how far I could take it
What did you use to create your exposure unit?
Nice thing about the Warmer Climates. I like this. Would not work in Michigan but it is nice to be able to do things like this!
Trust me I fully understand and for sure won’t work in Michigan I grew up in Lansing so I know about the climate
The water are cold or hot ?
Thank you sir I’ve been trying to get into it and instructions say 15 mins on mine but obviously not I over burnt my screens
which emulsion should i use with the 50watt uv if im using plastisol ?
Hello..can i use purple led light for exposure?
This is the LED from the video and it will burn your screens quick as well as halftones amzn.to/3NZMQ4u
Thank you.
I'd like to see your full setup for your burn unit. Was it just on a table? I couldn't really tell. Thx!
I have a video of how to make this from scratch check out this video if you want more information and yes it sits on a table or anything you want it to. ruclips.net/video/8i-LQJTR_Qk/видео.html
@@ApparelTalk Wow! Fast response and super helpful. Forwarding to my hubby. Will have him make this for me. I am super excited. You now have a Subscriber!
@@ApparelTalk another quick question. I watched the video link you provided. If you used a 24in board that holds the Quans light. What's the distance from the light to the screen? Thx!
Realize this is an old video. How far away did you have that lamp, from the glass
How much height do you put on your exposure unit? I keep 24” height but I can’t burn the screens fast like you, I spend around 1’40”sec to complete with one emulsion and 2’40” to another emulsion
What is the difference between black light and UV light?
Here is a little hack for ya...
Instead of using the manual timer and unplugging the light, get some "smart plugs" that you plug the light into. Then you can use the app for the plug or Alexa app to create a routine where the light turns on, counts down for 15 seconds, and then turns off just by you pressing the button on your phone. Or, if you use Alexa, you can make it so you say "Alexa, burn 160 mesh."
I have it set up for 110, 160, 200, 230 and 305
have not thought about that but I guess that would work too.
@@ApparelTalk it does work. Changed my game instead of playing with a timer and having to unplug or manually turn off exposure.
lets not make it rediculous
@@lunk8362 yeah, cuz automation is ridiculous.
@@Elevationprint 🤣🤣🤣
This is what I like to see....... great setup and a great job!!!! You ROCK 4 DAYYYYYYYYYYYYYYZZZZ!!!!!
Dtag1971 H thanks for the support I will for sure be putting out a lot more content as well
would this light work with Jac Diazo Emulsion ? cheers
Yes it should as it needs UV light for the Emulsion and this light is UV
I see it is not necessary to apply emulation in dark room. By the way what is the measurements of your glass? Thanks
If I’m not mistaken it’s a 20” it’s a pre cut from home depot
That's funny... im exactly where you started and I just did. See where I end up. Ty for video brother
Great video I am glad I came across it because I wanted to buy that emulsion but I did not know what light to use . What’s the distance between the glass and the light also what are the dimensions of the frame ? Thank you .
I have a video to show how to build one of these but I will have to measure that for you.
@@ApparelTalk thank you Id really appreciate it.
THANKS!!!! I NEEDED THIS!
what's the thick of that non uv glass?.( It means UV resistant, right?)
LED light flood light 50w is okay for this expose
I was looking up reviews on this Quans light and found you. I had order this but didn’t like how I have to keep unplugging it. I found and extension cord with foot or hand button on Amazon for $9. Thought I’d pass this info onto you to try. It’s GE 42803 3 Outlet Extension Cord with On/Off
thanks I just caught off the end and wired it to a switch but that would work too.
can send me the link for buy light ..i want to buy one…appreciate and have a great day
amzn.to/3CU2gA2
thanks for this sir! btw any kind of kinds/brands of emulsion are okay with this LED lamp?
They are all good just have to try the one that you might like more.
@@ApparelTalk what kind of glass did you use on top of the screen? and how thick is that?
Can I use a 30W unit instead of 50W?
It will take longer to burn the screen
how far is your light from the screen?
I have a video to show how to make one of these. I am sure I have the distance but I also will have to measure that for you as I can not remember.
@@ApparelTalk no worries man. I ended up purchasing an exposure table. I did use the same setup you are using now for about a month and it worked great.
what timer do you use?
I use a cheap timer that I bought at Walmart in the cooking section but you also use your phone
Have you done any half tones with that emulsion or led light?
Yes I have
Veteran Screen Printing I just bought that chromalite wr. I was using that ecotex from Amazon with mixed results. Need something more consistent
Veteran Screen Printing .....make a video....lol
Lol I just did some a couple of days ago I should have videotaped it
Looks good bro
Someone wanted to know about it and the time it takes I found that 15 sec worked best for me I did put the link where to get it in the description. Hopefully people will want to watch it and make the views go up a little lol.
Great job! How far is the light from the screen?
RellikThaGreat if I remember it’s around 16” but have another video showing on how to make this exposure unit and I say it in there
Great, thanks.
Do you remove the glass on the UV light or keep it on?
pukingdeserthobo I kept it in but you have to make sure you get the right black UV light on Amazon
@@ApparelTalk I should have I think I got it from your link
pukingdeserthobo if you have a lot of stuff running on that breaker circuit that can cause it as well if your not using Chromo Tech WT then that can cause it as well this light should break the time from 3 min to at least 30 sec also how far away is it from the screen
@@ApparelTalk please I'll really love to know how far the light should be from my screen because I want to get one off amazon and build mine. Thanks.
great job
How long do u let ur emulsion dry for I'm doing it for about 1hr an I did burns at 30 but wasn't getting the detail I need
So that why I used the calculator an it's saying 3 mins
U can see around the headlights an around the suspension it's missing also the intake part it has lines so I'ma do a 3 min burn an see what happens is 1hr enough to let the emulsion dry it's dry to the touch ? Way sooner if say 30 mins
Idk if you’ll get this since it was 3 years ago but does mesh count and fine detail affect the time you burn
the higher the mesh the better detail you will get
Great set up. We have a similar set up and I always say "you don't need all the fancy equipment to get the job done" I do have a question, what do you use to dry them after washing out in the booth? I place them next to a fan to dry but I'm waiting about 20-30mins for them to dry. Any suggestions to dry them quickly?
I will make a video to show how I dry my screens
@@ApparelTalk awesome. Subscribed
having the flood light on doesn't pre-expose your films?
S M if your talking about the little flood lights in the back hanging. No they do not at all mess with exposing it. I have even done it at night with using with and still nothing.
One consistent question you've not helped with a definite response is the distance of the light from the screen. Please it's important as am planning on building a box. Thanks a lot.
I have mine set at 18"
@@ApparelTalk Am so grateful, God bless you.
I'm getting 3 min + !
pukingdeserthobo make sure you get the correct light on Amazon
Ya I used an exposure calculator an it's saying 3 mins away have same light but mine is 30"way I made a exposer box