Wouldn't call it a total bs. First of all it's a fantasy world, and second of all it's made by a mechanical designer. Designing one of these, even if its total bs, is an extremely hard job to do
I was impressed by how clean each individual sword was made, but you went above and beyond and got them to combine to the full movie sword. Absolutely blown away by this man's craftmanship.
One of the (many) best parts of the movie is in the beginning he uses just the middle centerpiece blade and as the situation escalates and he comes to terms with his trauma you slowly watch him get more and more serious with the fusion sword/first tsugiri as he keeps removing more and more of the sub blade from his bike and adding them to the sword until he finally has the full sword assembled for his fight with Sephiroth at the end before disassembling it again and using each piece individually for the Omnislash V5. Such a fun little piece of character building and story telling through prop design while also being completely rule of cool badass.
7. Called the Fusion Sword or First Tsurugi. It was his replacement after he used his Buster Sword as Zack's Tombstone after the events of FF7. Has the ability to combine by channeling his energy into it, making it more compact and stronger, or separate on the fly giving him different strength and speed options.
I saw someone make the design in miniature that worked a few years ago and was hoping someone would have the skill and determination to do the same full sized one. The world does not disappoint.
Magnets were an AWESOME touch. Dude has already been wearing the Buster Sword on his back with a giant freaking magnet to keep it there, using magnets as the connector of his Fusion Swords is a stroke of genius.
Wow. I found you about a decade too late. I used to make anything and everything out of cardboard and whatever else I could find. I’m happy to see the fine art of cardboard art won’t be lost!
God, can you imagine this thing being made of... well, literally any metal? It'd probably weigh a couple hundred pounds. Also, if it's anything ferrous, you'd need superhuman strength just to dismantle it because the magnets would stick the parts together like flat Lego pieces.
I have seen and owned at one time a variation of it that was for cosplay made of metal. It only split into four swords though, and it was rather hefty. Still is a proof of concept that it could be done.
@@MinatheValkyrie I think, iron carbon alluminum alloy in theory could work. That should reduce the weight by a lot, and still retain some strenght, however only when fully assembled. It should still be around 50-80lb sword tho. So it will take some one quite strong to weild, let alone learn how to weild it properly. The individual swords would be much lighter, but due to their lenght wouldn't be very strong. The concept is cool, but just not practical. The sword is just far to big, and even if you made an alternate version at smaller scale, it will still run into weight to power problems.
If I recall from another video several years ago, Shadiversity I think, in the lore the only the edge was steel the rest was aluminum, still an 60-80lb sword
I have never clicked on anything (that I didn't specifically search for) quite as quickly as this video claiming to have made a FULLY INTERLOCKING SET OF FUSION SWORDS. Not only did you do exactly as promised, but you even made the construction process interesting. Well done my good sir.
The design of this sword is just so awesome. Not only is it ridiculously big, you also get a much higher sword per sword ratio. Final Fantasy at it's finest
Thank you RUclips algorithm for recommending this banger of a video! I’ve always wondered how a Fusion Sword would actually work, and you did a fantastic job here!
Holy mackerel, I can't IMAGINE how tricky it was trying to ensure all of these individual layers would stay solid even when laid together in the fused form. Truly amazing!!
The "main" sword may be made out of light wooden material in order to sustain the weight of the fully formed sword better... But for an ALL-CARDBOARD build, the craftsmanship is definitely god-tier... Nice work...
The structural integrity is nuts, especially being out of cardboard. Also props for making 6 swords to combine rather than just making the fusion sword itself
At Comicon, a battle was about to commence between 6armed cosplayers & another 5 who didn't have any crops/weapons with their costume. Then comes a stranger carrying one colossal sword. He interrupts the struggle and tells them: "I can join you 5 and lend you a sword. If you need help?". The unarmed cosplayers were delighted, but at the same time confused, after one of them said: Thanks for offering your help, but you only got One Sword on your back. DanCreator smirks at them, as he hands the craftable swords after dismantling his Cloud's Fusion sword. Turns out the rivals were dumbstruck and opted in following the Master Cardboard Craftsman.
Dang, Awesome work! I wish this video was around a few years ago, I made one out of cardboard for a college project, but it wasn't nearly as beautiful as this one!
It's a different sword called fusion sword from advent children movie...Cloud stopped using the Buster sword and put it at the place where Zack died~~~~ruclips.net/video/fwB78V7DsEM/видео.html
This finally made that thing's mechanics make sense. Still a super weird weapon, but it's FF. Should appreciate my next watch of Advent Children a bit more now.
I've been waiting for this video for literal years now. I knew that eventually somebody was going to pull this off and pave the way for the rest of us. You sir, are a saint and a scholar and I salute you.
They said that they are going to include all of the FF7 Compilation in the Remakes. I really hope this includes Advent Children. They could at least include the AC costumes and Weapons.
Overall awesome video. I also just have to say, I greatly appreciate all the fine details put into the video itself, particularly all the fun little sound effects as you were putting everything together.
Ive seen it in a few comments and i agree fully, i would buy one of these if it were for sale... this guy has got to start sellin blueprints or something man, incredible work
Considering the thickness? It's safe to assume no human could easily lift it, let alone any magnets strong enough to keep it together. If you want it as a prop, hollow carbon fiber would be the way to go
So, what's crazier: That this design wasn't total BS and actually possible, or that this madlad went and DID IT
Yes
Yes
Wouldn't call it a total bs. First of all it's a fantasy world, and second of all it's made by a mechanical designer. Designing one of these, even if its total bs, is an extremely hard job to do
and what makes it crazier is he made it out of cardboard
Both
I was impressed by how clean each individual sword was made, but you went above and beyond and got them to combine to the full movie sword. Absolutely blown away by this man's craftmanship.
The most impressive part of this craft is how one handle can hold all the weight
That's why he reinforced it with those pieces of plexiglass
Watching this and suddenly I'm reminded how much of a walking arsenal Cloud became. He's got like, what, 6, 7 swords on him at all times?
One of the (many) best parts of the movie is in the beginning he uses just the middle centerpiece blade and as the situation escalates and he comes to terms with his trauma you slowly watch him get more and more serious with the fusion sword/first tsugiri as he keeps removing more and more of the sub blade from his bike and adding them to the sword until he finally has the full sword assembled for his fight with Sephiroth at the end before disassembling it again and using each piece individually for the Omnislash V5. Such a fun little piece of character building and story telling through prop design while also being completely rule of cool badass.
7. Called the Fusion Sword or First Tsurugi. It was his replacement after he used his Buster Sword as Zack's Tombstone after the events of FF7. Has the ability to combine by channeling his energy into it, making it more compact and stronger, or separate on the fly giving him different strength and speed options.
The commitment to also make holsters deserves this man a prize
Japanese Meth wins
Especially since even THAT uses the canon design.
I saw someone make the design in miniature that worked a few years ago and was hoping someone would have the skill and determination to do the same full sized one.
The world does not disappoint.
I've never wanted a cardboard sword ever in my life till now
Magnets were an AWESOME touch. Dude has already been wearing the Buster Sword on his back with a giant freaking magnet to keep it there, using magnets as the connector of his Fusion Swords is a stroke of genius.
磁石やネジ、蝶番も使って可変するのカッコいい。合体、分解するのカッコいい。
Wow. I found you about a decade too late. I used to make anything and everything out of cardboard and whatever else I could find. I’m happy to see the fine art of cardboard art won’t be lost!
これちゃんと現実で再現可能な構造なんだｗ
最近Xで海外でクラウドのバスターソードしかり色んなゲームの大剣を刀で再現して振り回してた画像はあったよ。その内、こういった合体剣の複雑な剣技やFFのできそうもない剣技、デビルメイクライのような理解しがたい武器も海外のガチ勢なら再現しそうだね。
それな
2:44
材質が再現出来ないのが残念😢
@@tensora45678かっこよけりゃいいんだよ(ヤケクソ)
Watches the video until the end.
Nods in big approval.
Seems recommended video of him making a bike to store it.
WHAT??!!!
God, can you imagine this thing being made of... well, literally any metal? It'd probably weigh a couple hundred pounds. Also, if it's anything ferrous, you'd need superhuman strength just to dismantle it because the magnets would stick the parts together like flat Lego pieces.
Maybe it could use electro magnets such as to deactivate them if need be
I have seen and owned at one time a variation of it that was for cosplay made of metal. It only split into four swords though, and it was rather hefty. Still is a proof of concept that it could be done.
@@MinatheValkyrie I think, iron carbon alluminum alloy in theory could work. That should reduce the weight by a lot, and still retain some strenght, however only when fully assembled. It should still be around 50-80lb sword tho. So it will take some one quite strong to weild, let alone learn how to weild it properly. The individual swords would be much lighter, but due to their lenght wouldn't be very strong.
The concept is cool, but just not practical. The sword is just far to big, and even if you made an alternate version at smaller scale, it will still run into weight to power problems.
If I recall from another video several years ago, Shadiversity I think, in the lore the only the edge was steel the rest was aluminum, still an 60-80lb sword
@@jayglier I believe there was also a full steel version made by man at arms and it was so heavy the blacksmith threw his back out making it.
I have never clicked on anything (that I didn't specifically search for) quite as quickly as this video claiming to have made a FULLY INTERLOCKING SET OF FUSION SWORDS.
Not only did you do exactly as promised, but you even made the construction process interesting. Well done my good sir.
実際に映像から作るのも凄いけど、合体までできるように作り込んだゲームの製作陣もかなり凄い。
We just need metal versions of these and we're truly golden. Love this!
段ボールさんがすごいのはそうなんだが、
ちゃんと現実に可能な武器設計にしてる、スクエニさんもやっぱすげぇ
原作のデザインがシンプルだから段ボールでもここまでかっこよく見えるのすげぇ
いや、見せれる段ボール技術もすごい。
The design of this sword is just so awesome. Not only is it ridiculously big, you also get a much higher sword per sword ratio. Final Fantasy at it's finest
Thank you RUclips algorithm for recommending this banger of a video! I’ve always wondered how a Fusion Sword would actually work, and you did a fantastic job here!
Its been 18 years since the movie came out.. and finally someone make the perfect replica for this sword..
No way it has been 18 years. No way.
Even when its fully combined, the carboard sword handle is still able to withstand the full weight, great craftsmanship, welldone mr
See, this is the kind of play set I would buy for my kids. Imagine the bragging rights for just having this!
the way he stares at the glue at 00:15 reminds me of the way i stared at the swords in this video. great job man, awesome video
職人のきめ細かい技術ほんと尊敬する
Every single design of each sword is magnificent...especially the fourth one in the thumbnail
Holy mackerel, I can't IMAGINE how tricky it was trying to ensure all of these individual layers would stay solid even when laid together in the fused form. Truly amazing!!
Sephiroth: Note to self, bring water to next encounter with Cloud
Or fire
Cloud certainly had his priorities straight after the main game.
A six in one sword, and self repairing motorbike.
凄過ぎる。こういう素敵な動画が溢れて欲しい。
I have no idea why RUclips recommends us all stuff like this for no reason, but they should keep doing it.
The "main" sword may be made out of light wooden material in order to sustain the weight of the fully formed sword better... But for an ALL-CARDBOARD build, the craftsmanship is definitely god-tier... Nice work...
職人芸だぁ……鍔部分を蝶番使って可変にしてるの凄すぎる
Watched final fantasy 7 a decade ago, and I never thought someone would bring this idea to real life.
DAMN This is clean! I've never seen someone who worked with cardboard so neatly. Very cool!
The structural integrity is nuts, especially being out of cardboard. Also props for making 6 swords to combine rather than just making the fusion sword itself
Why is your profile picture Gawr Gawr?
@@DenaliSharpp-ju5yx its cute an I like her personality
At Comicon, a battle was about to commence between 6armed cosplayers & another 5 who didn't have any crops/weapons with their costume.
Then comes a stranger carrying one colossal sword. He interrupts the struggle and tells them: "I can join you 5 and lend you a sword. If you need help?".
The unarmed cosplayers were delighted, but at the same time confused, after one of them said: Thanks for offering your help, but you only got One Sword on your back.
DanCreator smirks at them, as he hands the craftable swords after dismantling his Cloud's Fusion sword.
Turns out the rivals were dumbstruck and opted in following the Master Cardboard Craftsman.
I'm totally amazed, the design actually works and the swords look like in the movie! Also, what a work! What a guy! Great!
Imagine coming to a cosplay event with this badass sword, awesome.
部屋に飾りたくなるクオリティ。素晴らしい
これは流石に神すぎる。陳腐な言葉しか出てこない。
গততপগআও
海外ニキも喜んでるね^ ^
Que ._.
美しい…(恍惚)
@@MDTamimTamim-ud9tcc.... C cc.... C c... ?
This should be sold as a kit. Totally worth it
I'd buy it.
name your price
„Its hard to keep your cool when you see twin blades turn into *a bow* .” Or in this case 6 swords into 1 GIANT sword
Never in my wildest dreams would have i ever belived that The First Tsurugi was possible IRL ... incredible
Thats insane! the fact that they all combine is just fantastic.
dude this needs WAY more views, this is utterly spectacular
this is the coolest thing I've ever seen made four quarters out of cardboard.
Imagine an Advent Children game with this sword would be insane swapping different sword and playstyle.
Hoping for this for the next game!
Spoiler
Maybe Zack gets to keep the buster sword and Cloud switches to the fusion swords as they travel together.
A advent children game is definitely gonna happen with this sword in it
The closest we got in any of the FF is Noctis.
When a full dive MMO comes out and people choose the blacksmith job, this is the video they're going to pull up.
それはダンボールというには、
あまりにもカッコよかった
大きく、分厚く、軽く、そして緻密だった
それはまさに少年の夢だった
コスプレした銀さんが思い浮かんだぞwww
Dang, Awesome work! I wish this video was around a few years ago, I made one out of cardboard for a college project, but it wasn't nearly as beautiful as this one!
That is totally badass. Just needs to be painted. This guy has major talent.
ダンボールとは思えない完成度、そしてギミック、やっぱり天才だ…
That's a dope sword. And I know that's GOTTA be heavy all together
格好よすぎ＆手際良いし手先器用すぎて尊敬レベル
This is the coolest video I've seen in months, amazing work man
The most accurate Buster Sword to date and it's made of cardboard
It's a different sword called fusion sword from advent children movie...Cloud stopped using the Buster sword and put it at the place where Zack died~~~~ruclips.net/video/fwB78V7DsEM/видео.html
One of the best swords of the final fantasy games
あの世界の武器職人も試行錯誤の末に作り上げたかと思うと胸熱
So cool, can't believe you made something from animation mechanically viable. Epic
This finally made that thing's mechanics make sense. Still a super weird weapon, but it's FF. Should appreciate my next watch of Advent Children a bit more now.
They said the design was implausible,
but I guess now you can say...
Myth _Busted_
That sword has 7 materia slots. Pretty strong if you ask me.
I've been waiting for this video for literal years now. I knew that eventually somebody was going to pull this off and pave the way for the rest of us. You sir, are a saint and a scholar and I salute you.
the handle of the base sword could have been made more sturdier to sustain the weight of the rest of the swords. but this was an awesome build 😊
How the hell do you even figure out how the swords are fabricated.... that's skill on another level.
I'm just amazed you can make such robust things out of cardboard. Really eye opener.
Just like airplanes XD
That is madskill, i wouldnt think metal hinge use on a cardboard. Great job sir
I’m amazed that you created the fusion swords! 🔥🔥🔥🔥🔥
OMG! You should sell the templates so we can reproduce it by 3D printers or handmade at home! For sure I would buy it!
合体剣が作れることを証明する最高の動画
This is the coolest thing I've seen all year. Phenomenal work!!
Moe: "And that's how, with a few minor adjustments, you can turn a regular sword into 6 swords!"
Very cool! Wish there was a longer detailed version of the video to see the steps even better!
剣一つ一つが完成度高くめっちゃかっこいい、そしてそれらを合体させてもずれ一つ生じず１つの合体剣になる（そして振っても大丈夫な強度！） もう浪漫しか有りません。最高です！
I’m really envious of people who have a super steady hand
That’s just incredible, I can experience making this through you XD
bro took crafting to a whole new level
this guy is living all of our childhood dream
Still, an absolutely amazing build!!
Proper Job man!
Even though this is cardboard i still bet this is pretty damn heavy!
I wonder if one could theoretically recreate this using foam or even metal.
It'd weigh 3x as much, but it would be such a cool display piece
Wish we could get a 3d model of these pieces! I would LOVE to print this!
組み合わせても無理なく持てる重量に再現できるのはダンボールならではの利点だね
素晴らしい
That is so damn cool. Anyone else hoping that we can get the fusion sword in the remake maybe as Clouds ultimate weapon in part 3?
They said that they are going to include all of the FF7 Compilation in the Remakes. I really hope this includes Advent Children. They could at least include the AC costumes and Weapons.
劇中の戦いながら少しづつ剣を組み合わせるのもカッコいいんスよねぇ…
すごくてすごいと思った
😂
It iss
Oh man, I've seen some really creative things on RUclips, but this? This was incredibly clean work. Well done.
That sword is just putting more sword in your sword. I love it
The swordest sword to ever sword.
Yo dawg, I heard you like swords with your swords.
You are chilling in the city an out of nowhere a blonde guy runs your fade with 6 swords at the same time
I have always been interested in stuff like this!! PLS PLS make toturial so the rest of us plebs can pretend to be as cool as you someday
Overall awesome video. I also just have to say, I greatly appreciate all the fine details put into the video itself, particularly all the fun little sound effects as you were putting everything together.
Love how this sword is basically Square be like: "heard you like swords so we made a sword made of swords to make a bigger sword."
And we could call it a megasword 🤣
Square Enix's mindset based on BTS was that "he had a big sword, now let's give him many swords"
Ive seen it in a few comments and i agree fully, i would buy one of these if it were for sale... this guy has got to start sellin blueprints or something man, incredible work
This is one of the coolest or the coolest video I've watched in youtube.
いや、、これもう天才でしょ
Well, dang! Very impressive…and shows the Fusion Blade is plausible!
So…full construction instructions where and when?
I would pay good money for instructions or, at the very least a template!
Imagine how heavy it is, if this was forged in steel or any metal possible. 😶
Considering the thickness? It's safe to assume no human could easily lift it, let alone any magnets strong enough to keep it together. If you want it as a prop, hollow carbon fiber would be the way to go
The REAL already know that the metal version has been on Amazon for years, it's hidden in there, but it's there
This is hands down the COOLEST cardboard will ever be.
And cardboard has been Chuck Norris.