Wow..I can't believe a 4 cylinder motor started so easy on 1 cylinder and kept running so well before the others kicked in.Try that nowadays..Great motor and vid..
I drive an old fuel-injection Volvo four cylinder, and the sound of this Lister engine going from one cylinder to two and three reminded me so much of my engine. When it's just been started in cold weather (or just any old time it wants to make a show of how hard its life is) it just chugs along on one cylinder, then two, then three. Four at idle takes a while.
Really brings back memories, we have a two cylinder Lister on our island in the Bahamas that we would hand crank and start. It always started no matter how long it sat!💪👌
I just love those Lister engines ! They,, ( no mater how many cylinders ) were always quick starting engines, I've found. Now this would be the engines I've had from 1 to 3 cylinders, and mine were air cooled.
We had two Lister engines 30 HP each, coupled with Broomwade Air Compressors, in our stone quarry, during 70s & 80s.These diesel engines had given best services.I am proud of them.N.V.Hattiholi.Belgaum. Karnataka.
It may be an old engine, but it is still a good engine and sounds like new with that nice burn at the exhaust. The starter has rhythm of his own at the graceful manner in which he starts it.
A lot of bullshit answers right here. What actually happens is that the drive pin that engages the slot on the crankshaft, is spring loaded, and flat on the drive side, and sloped on the reverse. So once the engine starts and the crank starts spinning, the sloped back side simply pushes the pin out the way. No broken shoulders, hands, thumbs, backs or anything else.
u dint read if it fails for watever reazon and it catches then there is stil nothing hapening and i know my engish isnt the best but pls. i recal ur coment stupid
Was easier to start as 3 of the 4 cylinders had the compression release valves opened thus he only needed to get one cylinder to fire then quickly close the compression release valve to finish the start. Nice work and a great old motor.
This is an old engine and there are people who think engines are satisfying to see sorry but you stumbled across the wrong video for your not an engine enthusiast
Love to see these old engines running so smooth and clean. Music to my ears.
long
Obviously well practiced and with a good engine kept in good order!
Nice video!
Yuooo
That sound is wonderful :D
Wow..I can't believe a 4 cylinder motor started so easy on 1 cylinder and kept running so well before the others kicked in.Try that nowadays..Great motor and vid..
I drive an old fuel-injection Volvo four cylinder, and the sound of this Lister engine going from one cylinder to two and three reminded me so much of my engine. When it's just been started in cold weather (or just any old time it wants to make a show of how hard its life is) it just chugs along on one cylinder, then two, then three. Four at idle takes a while.
the flywheel has alot to do with it
The big heavy flywheel is wats keeping her turning
000
All about the flywheel.
looks like it has a good harmonic balancer too. very smooth and clean burn.
Ricardo C. {authmaax} pfwFfyuhu
@@12nguyenquocthong42 I'm
055678okm.. 0pkhco7f. .mmoufcpby66
Really brings back memories, we have a two cylinder Lister on our island in the Bahamas that we would hand crank and start. It always started no matter how long it sat!💪👌
You would look a long time to find something as reliable today…..
H.
Good runner! That thing fired right up like it was fresh off the assembly line!
Very nice old engine and such an effortless start up.
dfrfdefefeherejergte
dhewgeegseges
regaskin
Risky Risky
regaskin Rfgh
That is a smooth running engine. Great job.
Lister Blackstone motors costumed to run very smootly, I remeber them from my child times 50 years ago, in Brazil farms. Thanks for posting.
Brasileiro?
Nicely done !
I just love those Lister engines ! They,, ( no mater how many cylinders ) were always quick starting engines, I've found. Now this would be the engines I've had from 1 to 3 cylinders, and mine were air cooled.
Reg Sparkes hjol
Very nice 4 cylinder lister engine.
coolest hand crank on youtube!
Embryophagist your a five year old with dead jokes and memes
Anything on 4 wheels you're* learn to spell, you dumbass with no self awareness
Embryophagist Jesus you really hurt me there....
@@SkengManNZ hhv
@@Sam-m04 rrrrrrrrrrrrrrrrrrrrr
Rrrrrrrrrrrrrrrrrrrr
Very nice. Old is gold
That was an easy start :-)
Sweet! I love this engine. Simple to start.
Starts better and lasts longer than a 2018 Ford Powerstroke.
No "Check Engine Light" either.
scdevon vuvy
scdevon the best,
scdevon a
A truck you have never had, or could afford. Its past your bed time, sport.
Ha good humor.
Would love to have it in a boat. There very fuel efficient.
Mantab..👍👍
This is one of those videos that's impossible to only watch once.
HEY MAYBE MAKE AN EVEN SHORTER VIDEO NEXT TIME. THE TWO SECONDS OF IT RUNNING WERE WAY TOO LONG
Mesin kuno ya Bro..👍👍👍
Nice
Thats starts easier than my Discovery😂😂😂
Even those break dints in the plain poolie feels necessary. And as if were intentionally meant for it.
We had two Lister engines 30 HP each, coupled with Broomwade Air Compressors, in our stone quarry, during 70s & 80s.These diesel engines had given best services.I am proud of them.N.V.Hattiholi.Belgaum. Karnataka.
Love the Lister engine sound 👌
Beautiful sound
a zvmv
Yh
Good like!!!
Muito bom.
Старый добрый дизель, нет никакой электрики, супер надежность
is that a 2 stroke diesel?
What model of Lister is this??
It may be an old engine, but it is still a good engine and sounds like new with that nice burn at the exhaust.
The starter has rhythm of his own at the graceful manner in which he starts it.
9 million views and still counting!
DAMN that looks like some serious 20-40HP or more o_o
This is a Lister JP4. It makes around 46hp @1200rpm. It's liquid-cooled so I wouldn't had run it long like this.
douro20 How did I guess so closely lol
And I know almost pretty much nothing about engines.
You have a very wide range of "close"
Its close enough for me. but thats what I can guess from what it looks like. sounds reasonable to me.
What model is this?
What happens if you fail to remove the crank handle once it gets going? ouch
Nice sound.
Bbgxzghb"r lmm
A lot of bullshit answers right here. What actually happens is that the drive pin that engages the slot on the crankshaft, is spring loaded, and flat on the drive side, and sloped on the reverse. So once the engine starts and the crank starts spinning, the sloped back side simply pushes the pin out the way.
No broken shoulders, hands, thumbs, backs or anything else.
ZS6JMP any if that fails its only 1 cilinder at the time so u let go shut of and try agian
jw van liere
You dont seem to understand. The handle will never catch. So there is no need to ''let go'' of anything.
u dint read if it fails for watever reazon and it catches then there is stil nothing hapening and i know my engish isnt the best but pls.
i recal ur coment stupid
How cool you just did it. :D
What a ripper, runs very nice
Could you be able to tell me where I could get one of these engines ??? Thanks.
Torque ?
...big assed flywheel...and four separate compression releases...good system...
Wow.. 😍
💪👌
Do it gonna fit in my honda?>
Compression release start up cool .
226 people watched this 1000 times.
I'm up to at least 10
actually 860 people !!!!!!!
Now its 2.2 and 1.2 mil
N o
mk
Love it.
to było super
I can sleep with this beautiful sound
How’s the fuel consumption?
How many of you watched it more than twice?
Wonder what the compression ratio is...
awesome 😍😍😍
I just love the ease you start that engine
فخر الصناعات الاوروبية والعالمية ليستر انكليزي
wowww very nice and easy
Taki motor w samochodzie i fabryka idzie z torbami!
Que coisa mais linda
Sounds great. Too bad there wasn't more footage (it ended rather abruptly). I'd like to hear this old girl under a bit of a load.
He started this up every few hours and ran for a few minutes, but he did wedge a fence post under the flywheel a few times.
I would place that in a home made RatRod!
Was easier to start as 3 of the 4 cylinders had the compression release valves opened thus he only needed to get one cylinder to fire then quickly close the compression release valve to finish the start. Nice work and a great old motor.
Robert N looks like they all have compression release valves, that's why the momentum of the flywheel want slowed when he stopped cranking
you weren't looking, he had all four on release, then flipped the one in.
Diesel😍😍😍😍
l भजन कृष्ण लीला मक्खन वाला लगा दो मटकी फोड़ दूं मटकी फोड़ दूं
Jaka to jest piękna Muzyka
Superb old girl!!!
I love it.
Wow so simple
Good
Babari pisan gening ngahirupan nateh
What would this be used for
Ear Honey!
kerenn mantap
What a beautifully running engine.
now thats a lister ,,,, hate to think how much sand and cement the mixer it powers will take
Utterly brilliant mate. Take my hat off to you.
Kto powiedział, że odpręźniki są przestrarzałe?
I have a peter listter in a generator and need to make it run .please help!!!!!!!
Sweet
It is speaking kazakh language
Anyone knows which motor is this 🤔 ?
I Think a Lister JP 4 about 50 hp
simple.
Good old Lister
Sounds like a truck
이 동영상을 보고 뇌가 돌고 돌았습니다
Very nice sound
So easy! O.o
Being the son of mechanic I amazed to see how easy to start this Lister.
Wow.Couldn't believe how easy it started.Good job! So when are you going to paint it?
Ligou, e agora ?
agora desliga
Eduardo Ventura videos porno
Tem brasileiro aqui? Kkkkk
Please don’t tell me behind him they are doing a lister get around for people with lister gen ?😂😂😂😂
very beautiful sound
springt besser an als mein Auto zZ ...:-)bestimmt good old Germany Maschine :-))
Wow
It was not so easy if he had connected to a pump as mine is.Or work on the first try or have to call someone else to make the second attempt.
Why would anyone want to start it?
This is an old engine and there are people who think engines are satisfying to see sorry but you stumbled across the wrong video for your not an engine enthusiast
@@reaper5631 nothing to sorry about, the smoke puffs were satisfying enough for me
Make a good boat engine
pure iron
Instal turbo in engine😂😂