One word of caution about the inside opening of the gas tank. Be careful when reaching in with your arm because the inside of the opening is razor sharp. Your likely to get cut as your pulling up, so wear a long sleeve for protection. They didn't debur the inside of the opening and i was cut pretty bad.
I bough a new pump, when open up gas tank and find out there are 2 hoses ,put it back and ready to return pump to where I got...finally this video shown the hose on pump housing is just for return line, and the pump they sent to me was right. Thank you for your video.
The video producer has obviouisly done this before! Getting the pump unclipped is a MAJOR problem (unless you're lucky!). I'm SO SORRY I even attemp;ted to do this! I've fixed a LOT of things in my lifetime, but this is the FIRST one I'm quitting on! What good is all the other instruction if you can't get the goddamn pump out?
Thank you so much. Just changed it today with : Unisia c17e2000( google it) .. the hard part was to put it inside again.. I had to take the fuel out and disconnect everything from the top cover then placing the new pump and plugging everything back to the cover
Hello, I’m glad my video helped you out. Thank you for your feedback! If you would like, Click below the video the PayPal link in the “description box” to treat me to a cup of coffee. Thanks !
The video is great with one major exception - the whole explanation of the clip on the pump housing and how to get to that. I don't know whether to press, attempt to pull, and from which direction. A better explanation and close up of the part would have been great. For the life of me and better part of hours, I can't "feel" what the heck is supposed to be "unclipped" but it's def not coming out. Other explanations of pinch the box, rotate, yeah - no. 2003 Nissan Pathfinder.
The clip or the lever to release the pump. I could not click-it back in place, is really a problem with that. I will run out of gas to figure if it shutoff before empty or pump did get deeper on tank.
Awesome video!!! Have a nissan pathfinder fuel level not working. I replace the fuel pump and now the fuel level is not working it marks that theres no gas. any suggestion..
The clip or the lever to release the pump. I could not click-it back in place, is really a problem with that. I will run out of gas to figure if it shutoff before empty or pump did get deeper on tank.
franklin holguin pinch the side of the box so the whole assembly can move,then flip the box around in the gas tank u should see a block rubber part remove that and stick a long screwdriver inside to remove the clip the pump should fall right off
WARNING WARNING WARNING!!! SPECIAL TOOL REQUIRED!!!! DUDE AT 5:06 YOU STATE THOSE CONNECTOR CLIPS GET REMOVED BUT YOU CUT THE PART OF THE VIDEO WHERE YOU REMOVE THOSE CLIPS. YOU FAIL TO MENTION THOSE CLIPS REQUIRE A SPECIAL TOOL TO REMOVE THEM! I GOT TO THIS PART AND REALIZED THOSE CLIPS WERENT COMING OFF. I OR ANYONE IN THE AREA COULDVE BEEN KILLED HAVING A FUEL TANK OPEN FOR HOURS WHILE TRYING TO FIGURE OUT THAT THOSE CLIPS AND PUMP HOSE TUBES WONT COME OFF WITHOUT A SPECIAL TOOL. NEXT TIME YOU MAKE A VIDEO BE SURE U DONT LEAVE OUT THE MOST VITAL PART. IF YOU CANT MAKE A COMPLETE VIDEO THEN DONT MAKE ONE AT ALL. ALL IT TAKES IS ONE SPARK FROM STATIC AND IT WOULD BE OVER. WARNING WARNING WARNING...SPECIAL TOOL REQUIRED TO DO THIS JOB!!!!!!
WARNING WARNING WARNING! THERE IS NO INSTRUCTION ON HOW TO REMOVE THE COMPRESSION FITTINGS @5:06. BE CAREFUL WHEN OPENING UP THE FUEL COMPARTMENT AS YOU WILL GET STUCK IF YOU DO NOT KNOW HOW TO RELEASE CLIPS. YOU WILL SITWITH AN OPEN FUEL TANK! ATTEMPT AT YOUR OWN RISK. THIS GUY CUTS THE VIDEO AT 5:06 AND FOESNT SHOW HOW TO REMOVE CLIPS. VERY DANGEROUS AND RISKY INSTRUCTION!
One word of caution about the inside opening of the gas tank. Be careful when reaching in with your arm because the inside of the opening is razor sharp. Your likely to get cut as your pulling up, so wear a long sleeve for protection. They didn't debur the inside of the opening and i was cut pretty bad.
Sorry about that. You experienced that so that we don’t have to. Thanks alot for the videos
Thanks Mate!
I’m glad my video helped n saved you money!
I’ll have a “Foster’ lager” on you
👍
Be well. Thank you!
Chris
I bough a new pump, when open up gas tank and find out there are 2 hoses ,put it back and ready to return pump to where I got...finally this video shown the hose on pump housing is just for return line, and the pump they sent to me was right. Thank you for your video.
The video producer has obviouisly done this before! Getting the pump unclipped is a MAJOR problem (unless you're lucky!). I'm SO SORRY I even attemp;ted to do this! I've fixed a LOT of things in my lifetime, but this is the FIRST one I'm quitting on! What good is all the other instruction if you can't get the goddamn pump out?
Thanks mate saved me the crazy mechanic fee! Have sent you a small amount of $$ on PayPal for your help
When you took the fuel pump out were there 2 hoses connected under the bottom or just 1 and the electrical wire?
Thank you so much. Just changed it today with : Unisia c17e2000( google it) .. the hard part was to put it inside again.. I had to take the fuel out and disconnect everything from the top cover then placing the new pump and plugging everything back to the cover
some pictures;;
ibb.co/0Jh7m4w
ibb.co/JpZtXHp
ibb.co/BZLdcB7
Thank you Bas Rutten!
Thanx I'm about to change my fuel pump. Cheers!
You are welcome! I’m glad it help you out..
I had a dream about someone stealing my QX4 and then leaving it on the side of the road with the fuel pump missing... this video might come in handy.
Does the 99 qx4 have a fuel check valve. If so. Where is it located. Everytime I search I get results showing a fuel pressure regulator
Hello,
I’m glad my video helped you out.
Thank you for your feedback!
If you would like, Click below the video the PayPal link in the “description box” to treat me to a cup of coffee.
Thanks !
The video is great with one major exception - the whole explanation of the clip on the pump housing and how to get to that. I don't know whether to press, attempt to pull, and from which direction. A better explanation and close up of the part would have been great. For the life of me and better part of hours, I can't "feel" what the heck is supposed to be "unclipped" but it's def not coming out. Other explanations of pinch the box, rotate, yeah - no.
2003 Nissan Pathfinder.
The clip is on the bottom, but the lever to release it is on the back, the opposite side of the sock. Squeeze that with the pump longways and pull up.
The clip or the lever to release the pump. I could not click-it back in place, is really a problem with that. I will run out of gas to figure if it shutoff before empty or pump did get deeper on tank.
GREAT JOB!!!BRAVO!!!
Which fuel pump you installed, high pressure one? 340lph? Or higher?
Awesome video!!! Have a nissan pathfinder fuel level not working. I replace the fuel pump and now the fuel level is not working it marks that theres no gas. any suggestion..
Dennise Morales fuel sending unit maybe...
Fuel guage must have got stuck somewhere while reinstalling ...... Open up and check if its free moving
And yes, I also got several cuts while attempting the pump removal.
Hello, sorry I can’t remember what fuel pump it was.. something I purchased from the local AutoZone or advanced auto parts.
Good luck.
The clip or the lever to release the pump. I could not click-it back in place, is really a problem with that. I will run out of gas to figure if it shutoff before empty or pump did get deeper on tank.
The clip is on the bottom, but the lever to release it is on the back, the opposite side of the sock. Squeeze that with the pump longways and pull up.
Thanks man, I spent 30 minutes trying everything to get that pump out, I used your technique and got it off instantly.
My husband can't get the fuel pump out of are 97 infinity Qx4 we can't get it to release and we can't find a video that shows a good view of it
What year vehicle is this?
I've been trying for a week and I do not know how to get the clip out of the bottom of the tank.
franklin holguin pinch the side of the box so the whole assembly can move,then flip the box around in the gas tank u should see a block rubber part remove that and stick a long screwdriver inside to remove the clip the pump should fall right off
2001
i guess I'm kinda randomly asking but does anybody know a good website to watch new movies online ?
@Alexander Ronan Lately I have been using Flixzone. Just search on google for it :)
@Alexander Ronan lately I have been using FlixZone. You can find it on google :)
@Alexander Ronan I would suggest flixzone. Just google for it =)
I really wish you people would show how to get the damn seats out
WARNING WARNING WARNING!!! SPECIAL TOOL REQUIRED!!!!
DUDE AT 5:06 YOU STATE THOSE CONNECTOR CLIPS GET REMOVED BUT YOU CUT THE PART OF THE VIDEO WHERE YOU REMOVE THOSE CLIPS. YOU FAIL TO MENTION THOSE CLIPS REQUIRE A SPECIAL TOOL TO REMOVE THEM! I GOT TO THIS PART AND REALIZED THOSE CLIPS WERENT COMING OFF. I OR ANYONE IN THE AREA COULDVE BEEN KILLED HAVING A FUEL TANK OPEN FOR HOURS WHILE TRYING TO FIGURE OUT THAT THOSE CLIPS AND PUMP HOSE TUBES WONT COME OFF WITHOUT A SPECIAL TOOL. NEXT TIME YOU MAKE A VIDEO BE SURE U DONT LEAVE OUT THE MOST VITAL PART. IF YOU CANT MAKE A COMPLETE VIDEO THEN DONT MAKE ONE AT ALL. ALL IT TAKES IS ONE SPARK FROM STATIC AND IT WOULD BE OVER. WARNING WARNING WARNING...SPECIAL TOOL REQUIRED TO DO THIS JOB!!!!!!
Car Guy what tool do you need
WARNING WARNING WARNING! THERE IS NO INSTRUCTION ON HOW TO REMOVE THE COMPRESSION FITTINGS @5:06. BE CAREFUL WHEN OPENING UP THE FUEL COMPARTMENT AS YOU WILL GET STUCK IF YOU DO NOT KNOW HOW TO RELEASE CLIPS. YOU WILL SITWITH AN OPEN FUEL TANK! ATTEMPT AT YOUR OWN RISK. THIS GUY CUTS THE VIDEO AT 5:06 AND FOESNT SHOW HOW TO REMOVE CLIPS. VERY DANGEROUS AND RISKY INSTRUCTION!