Thank you so much for your kind words and appreciation! I'm thrilled to hear that you found my video on Dial- Peers insightful and valuable. It's truly rewarding to know that the information I shared resonated with you and that you found it brilliant. Once again, thank you for your support and for taking the time to share your feedback. It means a lot to me, and I'm glad that my content is making a positive impact. Stay tuned for more exciting videos on my RUclips channel!
Thank you mate for explaining concept of dial-peer in world of VoIP. I really learnt in depth. Could you please clear my one doubt>> In pots dial-peer we use port command suppose port1/0/1:23, Here can you elaborate more for 23 which signifies as signaling part. Is it universal? I anticipate your comment. If I am not wrong that 23 used for signaling in T1 PRI lines, Right?
Your videos are so good and easy to understands. Can you please share the video link for voice translation rule if you already made it. Otherwise please plan one session about voice translation rule.
Time stamp 27:32 ..Voip dial peer by default forwards all digits collected so forward all command is not required incase of voip dial -peer .Please correct me if i am wrong
Forward all digits is required if you are defining particular number like if you are defining 911 in destination pattern then you have to use forward digits all command. that means if a number is defined explicitly then you have to use forward digits all or forward digits 3 command. If you are defining like destination-pattern ^[2-9]...... then you dont need to use forward digits all or forward digits 7 command. It will take all the numbers by default. There are actually so many scenarios with this forward digit or other commands.
@@TechnicalVenture if we are using pots dial peer and destination pattern is 911 then I understand forward digits all is required but in case of voip dial peer then forward digits all is not required as explicitly mentioned 911 will be forward
Could you please make videos on how to read different logs.. Such as ccm logs, perfmon , event viewer , isdnq931 , sip logs .This will really be helpful
Yes Pawan, I understand. I will surely make all videos in Hindi so that everyone can learn and understand quickly. Busy few days with some personal work but I will surely complete all lectures in Hindi asap.
Based on what I red so far in Planet RUclips s, you rendition of dial-peer is second 2 none. Simply brilliant! Thanks 4 sharing Technical Venture!
Thank you so much for your kind words and appreciation! I'm thrilled to hear that you found my video on Dial- Peers insightful and valuable. It's truly rewarding to know that the information I shared resonated with you and that you found it brilliant.
Once again, thank you for your support and for taking the time to share your feedback. It means a lot to me, and I'm glad that my content is making a positive impact. Stay tuned for more exciting videos on my RUclips channel!
@@TechnicalVenture U bet I will! & again 🙏 4 sharing!
Nice explanation. Please start something for contact center and MS teams integration.
Will surely do brother, Will soon start MS teams integration, Busy with some personal stuff now a days but will start soon
@@TechnicalVenture Please make videos on UCCE / PCCE
Please create videos on Contact Centre @@TechnicalVenture
Thank you mate for explaining concept of dial-peer in world of VoIP. I really learnt in depth. Could you please clear my one doubt>> In pots dial-peer we use port command suppose port1/0/1:23, Here can you elaborate more for 23 which signifies as signaling part. Is it universal? I anticipate your comment.
If I am not wrong that 23 used for signaling in T1 PRI lines, Right?
:23 is for T1 and :15 is for E1 which is a signaling channel in respective PRI lines.
that 23 is used for signalling and synchronization and yes that 23 is used in T1 PRI lines
Great video. Thank you.👋
Your welcome
Can you make videos on translation with different examples , how they into effect and where we should apply translation profile?
i am working on that actually, You will get it in some time
Your videos are so good and easy to understands. Can you please share the video link for voice translation rule if you already made it. Otherwise please plan one session about voice translation rule.
Thanks Rinn, Will create one on Voice translation rule
Excellent....
Thanks a lot
sir please make video on vicidail or suggest the videos or meterial.
Sorry buddy i have no idea about vicidail.
Video realted to webex are unavailable, could you please make it available
Time stamp 27:32 ..Voip dial peer by default forwards all digits collected so forward all command is not required incase of voip dial -peer .Please correct me if i am wrong
Forward all digits is required if you are defining particular number like if you are defining 911 in destination pattern then you have to use forward digits all command. that means if a number is defined explicitly then you have to use forward digits all or forward digits 3 command.
If you are defining like destination-pattern ^[2-9]...... then you dont need to use forward digits all or forward digits 7 command. It will take all the numbers by default.
There are actually so many scenarios with this forward digit or other commands.
@@TechnicalVenture if we are using pots dial peer and destination pattern is 911 then I understand forward digits all is required but in case of voip dial peer then forward digits all is not required as explicitly mentioned 911 will be forward
@@TechnicalVenture In voip dial-peers explicitly matched digits are not stripped. Its only in case of Pots dial-peer only.
Bro can u plz suggest me any course or video / certification where i can learn the video conferencing infrastructure.
Let me look for it on youtube and will let you know about the good videos
@@TechnicalVenture yes plz bro.
Could you please make videos on how to read different logs.. Such as ccm logs, perfmon , event viewer , isdnq931 , sip logs .This will really be helpful
Sure buddy, I will create one on these logs.
Thanks for watching my videos, I hope you have learned something from my videos
I would also suggest that would be a very good video for the knowledge base where we can actually create video on trace reading and debugs on gateways
Pls make videos in hindi . Language is not imp but understanding easily and quickly is more imp.
Yes Pawan, I understand. I will surely make all videos in Hindi so that everyone can learn and understand quickly. Busy few days with some personal work but I will surely complete all lectures in Hindi asap.
35:20 what is there in Translation profile config?
My iPhone 7821 I have kept on autoanswer still my phone rings how to solve these issue ?
Needs to check few other settings whether it is set to auto answer on headset or on speaker phone
@@TechnicalVenture already check all 3 options in that but still same issue ..!